LMS 4.2.3 Topology Services Why do some links appear as "Ethernet"?

Some of the llinks between switches in VTP Domain Topology View appear as think lines and are labeled "Ethernet1000M":
I've checked the interface configs many times, and both ends are Dot1Q trunks.  I suspect it has something to do with the middle switch, but can't find anything unusual in its config.
When you hover over one of the other links, a popup tells you the IP addresses of both switches, the interfaces involved, and the media type and speed.  When you hover over the link before one of the highlighted links, a popup tells you only the IP address of one of the switches, the interface involved, and the media type.  It's weird, I don't like it,and I'd like for the links to be uniform throughout the topology view.
Any ideas on how I can do this?  Is it an IOS problem? 
Thanks,
Chris

Any chance you are passing through a non-Cisco L2 switch on those links? I've seen this behavior is that case,

Similar Messages

  • Why do some videos appear distorted or grainy?

    I have first generation iPad. Why do some videos appear distorted or grainy?  Is there a fix for this? I am using only WiFi portion of product.

    What videos? You may be viewing some very low-resolution videos.

  • Cisco Prime LMS 4.2.1 Topology services issue

                       Dear ,
                               Topology services is not accesible on Win 7 client machine.On cisco works server it is ok.
    I reinstalled the Java but still same issue.Please help .

    I've seen this issue happen repeatedly on some machines. The root cause seemed to be in the bowels of the Java version / installation on the client. The solution which I found to work most reliably was to uninstall Java completely on the client and then launch a CiscoWorks applet like Topology Services.
    At that point, LMS will redirect you to the Java binaries that are provided on the server where they will be downloaded and installable on your client. That particular binary package has all of the optional Java bits to insure optimum compatibility with LMS. Subsequent client Java upgrades to the more current version did not seem to affect the interoperability following that procedure.

  • Why have some tracks appeared in duplicate?

    Some tracks in iTunes Match appear on my iPad and iPhone in duplicate. For example, the iTunes library on my Mac has Goldfrapp's Seventh Tree on it. This appears in playlists so it is on both my mobile devices as well. However, since subscribing to Match the downloaded tracks AND duplicate undownloaded tracks appear on my mobile devices...why is this and can I do anything about it?

    If you have view automation turned on and click the disclosure triangle in the track header you can see extra automation tracks. This is to allow you to view different types of automation for a single track without having them all bunched on top of each other.
    At a guess, they appear empty because you don't have any other automation on the track apart from volume. You can get rid of them by clicking on the disclosure triangle to hide them then check out the automation section of the manual, it should make more sense to you after this.
    R.

  • Why do some emails appear in Intenet Explorer but not on Firefox?

    My friend sent an email using a program in which she used her handwriting for the fonts. The email appears clearly when I use Internet Explorer but all that arrives when I use Firefox is a blank page although her name appears in the Inbox. I can't open some emails that require media player, either.
    Fafing

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Why do some Podcasts appear on the iPhone in different locations?

    I subscribe to six podcasts in iTunes.
    When I sync to my iPhone, four of these appear in iTunes>Podcasts and the other two appear in Videos>Podcasts.
    (a) Why don't they all appear in the same place?
    (b) How can I make them all appear in the same place?
    (Originally posted to Apple Support Communities > iPhone > Using iPhone > Discussions and reposted here on advice)

    I don't know who advised you to repost this here, but I'm afraid I can't help you. I don't have an iPhone, and this isn't a 'creating podcasts' problem, the topic of this forum. It's always possible that someone might chip in, but you would be better off in the iPhone forum and possibly the iTunes forum.

  • Why do some photos appear white or partly white?

    I have several thousand photos and i want them all to be available on my iPad.
    After syncing several of them are partly or completely white some with only a narrow band of the photo appearing at the top.

    What videos? You may be viewing some very low-resolution videos.

  • Why do some links not show up on my screen?

    Some links or response boxes to be filled in DO NOT Display on my screen. If I know where they are, I can find them when my pointer turns to "hand". The problem doesn't exist on IE (ugh!).

    There are many possible reasons for pages not to look right. Have you tried to tips in this article: [[Websites look wrong]]?
    If you compare with IE side-by-side and notice that colored panels are missing, check out this article: [[Images or animations do not show]].
    Any luck?
    If that doesn't help, can you post a URL or two of pages that have this problem and indicate which parts are not visible in your Firefox?

  • Why do some songs appear in gray on iPhone?

    I purchased Match, thinking it was a great idea, so that I coupld consolidate all my music libraries, and so have access to all my music from any of my devices.
    Mistake. Match capriciously shows songs on my iPhone—sometimes the album is there, sometimes it ain't.
    So I turned off Match on both my computer and my iPhone, then resynched my iPhone.
    However, now, songs that I have on the iPhone appear in gray—and don't play.
    Match *****—and the sad part is, it's a great idea. Who wouldn't want one place where all your songs are stored, so you can play any of them on any device. It's not just a great idea—it's an excellent idea.
    But the execution is terrible. The user interface is perfectly fine—it's the "beneath the hood" issues: Albums appearing and then disappearing at random; the interminable upload process (I have a mere 2,400 songs, and it took more than a day, even with high-speed intenet); playlists appearing empty on the devices; etc.
    I doubt if Steve Jobs would have let such a bad product go out into the world. Shame on you, Tim Cook.

    More details. On what device do you see the cloud icon; what "songs list" are you refering to?

  • Why do some documents appear blurry and unreadable?

    i opened the text on my power engineering website (which suggested firefox as the best browser) and the text all appear blurry and i cannot read it.

    Are you zoomed in?
    Hit Ctrl + 0 (zero) to reset the zoom
    Hit Ctrl + + to zoom in
    Hit Ctrl + - to zoom out
    Does that help?

  • Why do some songs appear on a playlist but not under their artist?

    I have a couple songs that will play on the iPod but can't be accessed through their artists. The only way I can access them is under a playlist. For example, I have 4 songs by Fat Boy Slim, 3 of which coming from unknown albums. When I select Fat Boy Slim under the artist menu, it goes straight to the album that the fourth song is under. The songs from unknown albums have to be accessed through the Top Rated playlist. If I select almost any other artist, it will lead me to another menu where I can choose "all" or any of the albums of that artist. The same applies to another artist where ten songs are from one album and one song is from an unknown album; the song with an unknown album will not appear under its artist. The Ipod will just go straight to the album that the ten songs are from. Does anyone else have this problem? How can I fix it? By the way, I have the 30 gig video iPod.

    This may be happening because there is no album name for those songs. Since the song with an album title does show up, try naming the albums for the other three songs. They'll probably show up.

  • Why the LMS topology Service takes long time to reflect the device availability status?

    In the topology services map, the color status of the router takes long time to move from red to green and vice versa.
    i have already configured the time interval in the fault monitor poller setting to 6minutes but the only thing reflected the little mark at the top of the icon itself. anyhow the topology service still believe that the devices are unreachable. i have waited almost 45 minutes and nothing happened.
    please let me known the trick to make the topology services act more quicker .
    Sent from Cisco Technical Support iPhone App

    Topology Services isn't really designed to be a near real time network device up/down tool. It will an change icon's status as a result an ANI engine polling cycle or an admin operator-initiated manual device rediscovery. While you can increase the frequency of polling cycles, that's not usually such a good idea as you could make the server be polling constantly and never completing a job.
    To ascertain near real time fault status one should refer to the Fault Dashboard.

  • Unable to launch Topology Services LMS 4.0

    When i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again. Any idea why this is happening?
    /Viktor

    so you are accessing LMS from the server itself?
    Can you uninstall all other Java versions and reinstall only the one from the LMS server, then try again.
    Alternatively you could try to access LMS from a client which has no Java installed. Install the LMS Java on that client and see if this works. If it is successfull I would recommed to uninstall the other java versions from the LMS server and reinstall only the "lms java" if you still want to use it to access LMS.

  • LMS 3.0 topology services and email notifications issue

    Hi
    I have an LMS 3.0 install that was working when I installed it at a customer site a few months back.  I went back in to give them an overview of its operation and there are now several issues.  Nothing has changed since I installed it because the customer didn't know how to use it.
    The issues now are
    1.  When there is a link failure the mail account that should receive a notifivation gets nothing.
    2. In topology services the faled link goes red but when repaired goes to dotted red and never goes back to solid black.
    I know the mailing worked previously because I can see previous errors that were fixed being reported about a month back.
    Also in DFM all my devices now show as learning under the device discovery page and never move from 10% completed.  I found another post that says I need to upgrade to LMS 3.0.1 and DFM 3.0.5
    Is it possible this will fix the other issues ?
    I have LMS 3.0, DFM 3.0.0, RME 4.1 and CM 5.0
    Many thanks, Stephen.

    Yes, your versions are plagued by numerous bugs.  It is highly recommended you upgrade to LMS 3.0.1, then apply the Campus Manager 5.0.6 and DFM 3.0.5 service packs.  LMS 3.0.1 can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 , and the various required SPs from Common Services > Software Center > Software Update.

  • Can not use Topology services in LMS 3.1

    Hi all,
    I'm using LMS 3.1 with Campus manager 5.1 and install on solaris platform. When i click on topology services in campus manager, i have received a message as below
    Please help me resolve this error
    Tks,
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:453)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:100)
    root cause
    java.lang.NullPointerException
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.

    Post the NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log in addition to the output of the pdshow command from this server.

Maybe you are looking for

  • Trigger Between two DB located on different Server

    Hi Everyone, According to my project requirement I need your help to create a trigger on one table employee of my 10g DB located on server 172.128.1.62, which will trigger for any Delete, Update and Insert and update the same on its duplicate table l

  • Web Service call problem "MalformedURIException: no scheme"

    Hi, i've a problem with a WebService call. The flow is ThirdParty>PI>Sap Ecc I have a WebService exposed by PI and a WebService exposed by Sap Ecc. The flow was tested and it's ok in the Dev and Qas Enviroment, after the transport in the Production e

  • Configurator ROI and Usage

    I'm trying to get a good understanding for how people are using the configurator. I currently work for a manufacturing company. Customers have a few options for ordering, either configured * #;s pre-configured items or standard items. For our company

  • Unexpected error occurred while translating metadata oracle.security.fed.xm

    Getting Error while importing the SP metadata. Caused by: javax.management.RuntimeMBeanException: Unexpected error occurred while translating metadata oracle.security.fed.xml.translator.TranslationException: org.xml.sax.SAXException: Could not locate

  • Password creation after installation for root sign in

    When I installed Solaris, I opted out of assigning a password during configuration, and now I cannot login to Solaris Managment Console. How do I creat a post-install password?