LMS 4.2 Applications missing from Software Center

I have a problem with LMS 4.2.4 Software center on Win2K8. I have been trying to download device updates and the only product listed in software center has been:
Inventory Config And Image Management
It seems like this happened to me before and I opened a TAC case and got the list of products back but I can't seem to locate the case history. To top it off my LMS support contract is in limbo due to some administrative glitch and I am waiting for my account team to sort it out. Meanwhile I have just installed some relatively new products (3850, 4500-X) and LMS doesn't seem to recognize these completely.
The list of apps seems to be stored in the NMSROOT\lib\classpath\com\cisco\nm\xms\psu\conf\tag.properties. I stumbled accross a tag.pl script in the bin directory that modifies this file. So I searched in vain for the proper contents for the tag.properties file. In the end I just issued the following sequence to get common services back:
cd <NMSROOT>\lib\classpath\com\cisco\nm\xms\psu\conf
perl D:\Software\CSCOpx\bin\tag.pl tag.properties -a "cmf:Common Services"
So I am not sure why a perl script to modify the tag.properties file is necessary since it just seems to append the specified product to the end of the file. In any event I then went to
Admin > System > Software Center > Device Update
and sure enough CMF appears and I am able to check for and install device updates for it. However, I still seem to be unable to perform UT collection for the 3850 stack which is what I am really after. So does anyone know what product I need to add and get updates for in order to get user tracking working? In other words, what is the output of
psucli.bat -h?
Thanks,
-Jeff

Hi Jeff,
looks like tag.prop is corrupted.
it should have the below content :
ipm:IPSLA Performance Management
cmf:Common Services
lmsportal:LMS Portal
cvw:CiscoView
rme:Inventory Config And Image Management
dfm:Fault Management
lms:LAN Management Solution
upm:Device Performance Management
cm:Network Topology Layer 2 Services and User Tracking
Is this a new Installed ? if yes share the Installed.log
if you have good backup ,then try retstoring it.
Thanks-
Afroz

Similar Messages

Available Software tab is missing from Software Center

Some users are missing the available software tab in software center. This is software that can manually be installed and is not required. Is there any specific rules for this tab to show or not to show?

Hi,
Any updates?
Please feel free to let us know if you need further assistance.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to hide installed application from Software Center 2012

Hello,
I would like to ask you whether it is possible in Software Center 2012 to remove the record of program that was installed successfully from application catalog.
Currently it stays visible in SC as "Available" constantly informing users with popup that there is new software available for installation. This may be disturbing behavior for users.
Technical specialist in our company would be very glad to know some workaround. Is there some xml file or registry on user computer that could be used to remove such record from Software Center 2012?
Thank you very much for any advice!

Hi,
There is a related setting in Client Setting - Show notifications for new deployments.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to unistall application from software center

Hi,
I am unable to uninstall Chrome from Software Center. When i select Chrome and click uninstall, it doesn't seem to do anything.

Check logs to get more details about issue
http://www.scconfigmgr.com/2012/08/15/applications-in-software-center-uninstall-with-removal-failed/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Clients cant download application from software center [ error : 0x87d00607 ]

I've got a small SCCM 2012 deployment with about 3 clients , these three clients cant download application available on software center!
i checked out my boundries and boundries group and they are well configured .
help plz

i have just a subnet configuration in my boundary so there's no association against the site in AD
Houda
Subnet or IP ranges? Best to configure with IP ranges.
http://blog.configmgrftw.com/ip-subnet-boundaries-still-evil/
Cheers Paul | http://sccmentor.wordpress.com

Applications missing from Creative Cloud Desktop application

If you are unable to locate a specific application then it is likely the computer you are using does not meet the current system requirements. In the following example you can see that After Effects and Premiere Pro are missing from the list of available applications.
When I look at the System information for my Windows installation I am informed that I have a 32-bit version of Windows 8.
This means that I will be unable to install Premiere Pro or After Effects as my current computer does not meet the minimum system requirements. You can find a list of Creative Cloud system requirements at Adobe Creative Cloud – Tech specs.
For additional information please see Not all apps displayed for download | Creative Cloud desktop app, Adobe Application Manager.
If you have confirmed that your computer meets and exceeds all of the listed System requirements then please see CC desktop lists applications as "Up to Date" when not installed.
Message was edited by: Jeff Wright
Updated ink to http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html.

Hi Jeff,
I have a lot of problems. First og all the system will not accept my account and even I have downloaded CPLauncher and can see the software, I will not genereate password. Nothing works, and if do not, I have to stop paying, because my boss are a little angry.
He says: We pay and it do not work. Find other software. We can’t afford you sitting doing nothing. If Adobe makes such a software that causes us trouble, we will change to something else, we do not need Aobe for our projects.
So Jeff – The software are very complicated, it can run, It can’t genereate license, and on top of all this, I have to defend Adobe. Well – I will not. I have been fighting in 3 weeks and this week is the last. Monday morning I will stop using Adobe coud and stop my membership.
Med venlig hilsen / Kind regards
Michael Peters
Tlf.: (+45) 70 25 25 85
Mobile: (+45) 30 76 54 50
www.europeanmannequins.com
Fra: Jeff A Wright
Sendt: 18. november 2014 17:51
Til: Michael Peters - European Mannequins & Shop
Emne: Applications missing from Creative Cloud Desktop application
Applications missing from Creative Cloud Desktop application
created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion<https://forums.adobe.com/message/6940856#6940856>

Software install from software center is failing

Hi, We have a application install that is failing when trying to install from software center. Its a straightforward .msi install.
Which log file would we look at to see why the application install is failing?
Thanks
Thanks Lance

Hi,
Please see AppEnforce.log and AppDiscovery.log if the installation already started.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center

What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
Thanks

Cool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)

Application status in Software Center "installing" for hours

Hello,
I have sequenced SPSS, application installs on the client and works but... in the Software Center remains status "installing" for hours.
Once the status changes to installed, no errors in aapenforce.log.
CAppV5XHandler::InstallApp() completed successfully.
I have tried many times, App-v 5 and App-v 5 SP2. The same problem so it is application doing somenthing apparently.
How to troubleshoot this?
Where to look ?
Thanks in advance,
Hanna

When I run msiexec on the sequencer I do generate the log file but on the installation on the sequencer runs perfect. Also the log file contains no errors.
The problem is, when I install appv from the Software Center, which in fact is a PS command "Mount-AppvClientPackage", I do not issue any msiexec command at this time and I cannot generate the msi log file.
So, I wonder in which logfile can I see what is going on in the meantime...
In this example it took one hour...while application itself was installed within a minute and you could just open it and use it. See the logfile..
<![LOG[ Executing Command line: "C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';
Mount-AppvClientPackage -PackageID bc99e8bc-1e5a-4284-831d-a91ae1cfff79 -VersionID 2fcb6862-bebc-4539-8565-fe0b8dc61748 with system context]LOG]!><time="14:42:00.956-60"
date="03-27-2014" component="AppEnforce" context="" type="1" thread="4804" file="appexcnlib.cpp:345">
<![LOG[ Process 3032 terminated with exitcode: 0]LOG]!><time="15:40:10.634-60" date="03-27-2014" component="AppEnforce"
context="" type="1" thread="4804" file="appexcnlib.cpp:431">

Scanner Actions & Printer Preference sections missing from Solutions Center

I have just bought a Photosmart 6510 e All-in-one. I had no problem setting it up on my laptop and easily set it up on an old desktop PC. However I noticed in the HP Solutions Centre on the laptop that two sections are missing from this - 'Scanner Actions' and 'Printer Preferences'. The only sections appearing on the laptop's page are Web connected solutions, Shopping resources, Help & Support and Privacy Disclosures. However the missing sections both appear on my desktop PC's Solutions Center. How can I get them to appear on the laptop's Solutions Center?
The Solutions Center I am referring to is the page that appears when I click on All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series or the printer icon.
Desktop PC - Windows 7 Professional (32 Bit)
Laptop - Windows 7 Home Premium (64 bit)
EDIT: I have completely rewritten this post, including the title as I was using the wrong terminology so hopefully it now makes more sense and I can get an answer to my problem. Maybe even an expert one!
Apologies in advance to moderators if I have done the wrong thing by rewriting this, sorry.
This question was solved.
View Solution.

Hi,
To clarify, HP solution center is utilized on prior models. The software title our newest models use when accessing via All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series or the printer icon or the desktop icon is simply 'HP software'.
First run the following utility and let me know what results you have
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96506-1&cc=us&dlc=en&lc=en&...=
Make sure you have installed the printer with the latest software - a quick uninstall - All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series- uninstall and reinstall using the link below will insure this
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-100190-1&cc=us&dlc=en&lc=en...=
Do you have any anti-virus or 3rd party firewalls on the notebook? If so, what type and version info.
thanks!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Running Task Sequence from Software Center failed after rebooting to WinPE (0x8022001B)

Hi all
I have created a task sequence to refresh client OS to windows 8.1 x64. I ran this task sequence in software center on a windows 7 client, everything went well without any fails.
But when I ran the same ts again after it refreshed to Windows 8.1, it failed immediately after rebooted to WinPE. It shows a warning with error code 0x8022001B.
My test environment: SCCM 2012 R2 (Windows Server 2012 R2). Client Device: Lenovo L430
Any suggestions? Thanks in advance!
SMSTS.log file shows below:
<![LOG[Configuring 1 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
<![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
<![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
<![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
<![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
<![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
<![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
<![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
<![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
<![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
<![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
<![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
<![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
<![LOG[Adapter index: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
<![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
<![LOG[Getting namespace "Microsoft-Windows-TCPIP" for architecture "amd64"]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="smiinterface.cpp:222">
<![LOG[Added list item with key value 'a4-17-31-f3-e4-28']LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:441">
<![LOG[Configuring 2 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
<![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
<![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
<![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
<![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
<![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
<![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
<![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
<![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
<![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
<![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
<![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
<![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
<![LOG[Adapter index: 1]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
<![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
<![LOG[spItem->CreateListElement( var, &spChildItem ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,439)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:439">
<![LOG[Failed to create list element with key value 'a4-17-31-f3-e4-28' (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="smiinterface.cpp:439">
<![LOG[pSetupPass->addListItem( m_spSettingsEngine, pszNamespace, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,1187)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:1187">
<![LOG[m_pSMIInterface->addListItem( SetupPassValue[eSetupPass], pszComponentName, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,738)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:738">
<![LOG[AddListItem( eSetupPass, XML::TcpIp::ComponentName, XML::TcpIp::Interfaces::InterfaceElement, sIdentifier ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,1063)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:1063">
<![LOG[m_pImpl->AddAdapterTcpIpSettings( XMLAnswerFileImpl::WindowsPE, adapterInfo ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\winpeanswerfile.cpp,176)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="winpeanswerfile.cpp:176">
<![LOG[pAnswerFile->AddNetworkAdapter(adapterInfo), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netadaptersettings.cpp,575)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:575">
<![LOG[Failed to configure adapter 1 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netadaptersettings.cpp:575">
<![LOG[adapterSettings.Configure( pAnswerFile ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netsettings.cpp,188)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netsettings.cpp:188">
<![LOG[Failed to configure network settings for adapter 2 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netsettings.cpp:188">
<![LOG[m_pNetSettings->Configure(pAnswerFile), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,191)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:191">
<![LOG[this->createAnswerFile(sAnswerFilePath), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,140)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:140">
<![LOG[pSettings->configureAnswerFile(), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootshell.cpp,595)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootshell.cpp:595">
<![LOG[Execution failed with error 8022001B.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="bootshell.cpp:703">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 800]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1583">
<![LOG[LOGGING: Setting log directory to "E:\SMSTSLog".]LOG]!><time="14:10:49.130+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1808">

Then it's using a different boot image that doesn't have the NIC driver. The OS that the TS starts out in has no impact on the WinPE environment. Either the driver is there and properly loads or it doesn't -- there is not and cannot be any connection to
the OS the system was booted into prior to PE booting.
Thus, the only possibility here is that the boot image does *not* have the NIC driver in it. You need to verify which boot image I being used in both cases.
Jason | http://blog.configmgrftw.com | @jasonsandys

Flash application missing from CS3 Design Premium disk,OSX?

Does anyone know if the Flash application is missing from the CS3 Design Premium disk,OSX? I installed all the programs a while ago and never opened the Flash program. Now, when I do, I can't open the application. There are other folders for Flash, but no application. It seems that it is missing. I tried to reinstall it from the original disk, but the installation is interrupted by a message that asks that the Fireworks CS4 disk be inserted. I had downloaded a trial Fireworks CS4, but do not have a disk. I uninstalled Fireworks ( according to adobe's instructions) and tried to install Flash again, but keep getting the same 'Fireworks CS4 disk be inserted' message. Does anyone know anything about this? Any help would be appreciated!

Yes, you unisntall the whole suite. It only uninstalls the programs, any user data and configuration is unaffected. If you wanan back it up, regardless, check your Users:You:Preferences:Adobe and Users:You:Documents folders and copy the stuff there toi a safe location.
Mylenium

Applications missing from EAS and can't see designated HBR on forms in workspace

Hi!
Just finished patching our EPM system;
11.1.2.1.600: Oracle Hyperion EPM Workspace, HSS and Planning, fusion edition.
11.1.2.1.103: EAS
After installing the patches the systems were up and running and everything was just fine until yesterday around noon, when suddenly all of our applications disappeared from EAS.
At the same time HBR Associated to the different forms was\is nowhere to be seen (in Workspace) when opering the planning forms.
If I try opening forms in planning (not via WS), I can see all of the HBR associated to the forms, run them and push data back to essbase.
Regards, Tom L

We are currently using approximately 25 applications. I can only see the server in EAS, but no apps.
Also create application is greyed out so it would seem that I don't have the sufficient rights which would be strange due to
the face that I've got admin rights.
Regarding HBR we have no problems seeing and running HBR for our classic apps in planning. The problems with HBR is related to WS.
Thx!

Conundrum - PXE boot fails vs. "reinstall OS from software center" succeeds

Hi All.
I am facing a bit of a conundrum..
In our offices I am seeing some strange behaviour when trying to PXE boot into a TS to reinstall or install OS.
If I use F12/PXE boot then the deployment fails during OSD.
If I take a client (the same client as I tried pxe booting with) that is fully installed and reinstall OS via software center then the deployment completes.
Any ideas what could be wrong?
Kindest regards, Martin

Daniel:
Clients are both laptops & desktops.
I "feels" like it's the network that's acting up but I really can't see where.
PXE boot works.. it's not until it tries to apply the OS...
whether it's a timeout or what it is I cannot say..
Gerry: After all will you be likely to rebuild your entire estate in-situ any time soon?
You know... we are actually On the verge" of upgrading & Streamlining our entire network infrastructure..
But I'd still love to solve the problem..
We never had this issue when we only had MDT as deployment tool.
it's not until sccm came into the picture that this issue has arisen.
Kindest regards, Martin

N82 WLAN application missing from phone / PC Suite...

Have a new N82, April. When purchased, in China, WLAN was in the system but language change required a reset at point of purchase. However, WLAN application vanished and despite several attempts at locating on the PC Suite disk, to reinstall no luck. Latest updates seem to further corrupt phone and create normal network signal. Fix by resetting to factory settings but WLAN still missing. I am using Windows XP.
Anyone know where the WLAN file is located on the disk and how I can reinstall to the phone.
Any other info would be appreciated. Thanks

Have you used FExplorer or some other such app to delete files you shouldn't have deleted?
Anyway, you could try reformatting the phone (all messages, pictures, numbers, etc., will be gone:
http://my-symbian.com/7650/faq/showquestion.php?fldAuto=29&faq=4
If that doesn't help, ask your nearest Nokia service/repair center reflash the phone with whatever is the latest phone software (firmware) release:
http://www.nokia.com/repair

LMS 4.2 Applications missing from Software Center

Similar Messages

Maybe you are looking for