LMS 4.2 Backup Failing Randomly

Has anyone seen this?
Backup failed on 2012/06/03 at 22:02:52. REASON: Unable to proceed with the backup operation as some files are being accessed by jobs. Reschedule the jobs such that the backup job does not coincide with other jobs.
Randomly the backup for lms 4.2 is failing. it has suceeded but majority of the time its failing. i have tried changing times but nothing seems to work. previously we were running 4.0.1 and had noproblems with the backup time.
Just found the bug
CSCtz29665
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.1/readme/lms_421_readme.html#wp1203775
no work around at the moment

the patch for BugID CSCtz29665 is released here on CCO:
"http://www.cisco.com/cisco/software/release.html?mdfid=284259296&flowid=31102&softwareid=280775103&os=Windows%20CE%202.11&release=CSCtz29665_4.2.2&relind=AVAILABLE&rellifecycle=&reltype=latest"
I do not know whey they opend a new section for Windows CE 2.11, - but on CCO you have to follow this path to find it:
Downloads Home > Products > Network Management and Automation > Routing and Switching Management > Network Management Solutions > Cisco Prime LAN Management Solution > Cisco Prime LAN Management Solution 4.2 > LMS Patches > Windows CE 2.11-CSCtz29665_4.2.2

Similar Messages

LMS 3.2 Backup Failed

Hi, i try to backup lms but it always give me errors,i did it 2 times one with GUI from common services and the other one using command, the output is
2 errors reported
[Sun May 8 18:20:36 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
[Sun May 8 18:20:36 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
[Sun May 8 18:20:36 2011] ERROR(1403): Database aniDb backup failed and . Check the log file for information.
[Sun May 8 18:20:36 2011] Backup failed: 2011/05/08 18:20:46
Primary key for "EmbuUserTracking" has missing index entriesSQL error (-300) -- Run time SQL error -- Validation of table "EmbuUserTracking" has failed
VALIDATE TABLE "cwsiSA"."HistoryHostTracking"
Index "historyupdate" has invalid or duplicate index entries
Index "historyupdate" has missing index entries
SQL error (-300) -- Run time SQL error -- Validation of table "HistoryHostTracking" has failed
VALIDATE TABLE "cwsiSA"."HistoryUserTracking"
2 errors reported
[Sun May 8 18:19:20 2011] Validation D:/LMS-BackUp/May-2011/0\0\campus\database\ani.db failed.
SQL Anywhere Command File Hiding Utility Version 10.0.1.3830
SQL Anywhere Backup Utility Version 10.0.1.3830
(41672 of 41670 pages, 100% complete)
Database backup completed
SQL Anywhere Command File Hiding Utility Version 10.0.1.3830
SQL Anywhere Validation Utility Version 10.0.1.3830
2 errors reported
SQL error (-300) -- Run time SQL error -- Validation of table "EmbuUserTracking" has failed
SQL error (-300) -- Run time SQL error -- Validation of table "HistoryHostTracking" has failed
[Sun May 8 09:23:22 2011] Validation D:/LMS-BackUp/May-2011\0\campus\database\ani.db failed.
[Sun May 8 09:23:22 2011] Validation D:/LMS-BackUp/May-2011\0\campus\database\ani.db failed.
[Sun May 8 09:23:22 2011] ERROR(1403): Database aniDb backup failed and . Check the log file for information.
[Sun May 8 09:23:22 2011] Backup failed: 2011/05/08 09:23:32
I have checked the directory and the size of data is aroung 15 GB is this correct backup
thanks for your help

Hi Joseph,
I run the perl.exe from C:\Program Files\CSCOpx\bin and then i write the command
C:\Program Files\CSCOpx\objects\db\conf\configureDb.pl action=validate dsn=cmf
I got the below result, i am new perl script and i i dont know what i did wrong
Backslash found where operator expected at - line 1, near "CSCOpx\"
Backslash found where operator expected at - line 1, near "objects\"
Backslash found where operator expected at - line 1, near "db\"
Backslash found where operator expected at - line 1, near "conf\"
thanks for your help and support

Problems upgrading from LMS 3.0 to LMS 3.2 - the backup fails.

I'm upgrading from LMS 3.0 to LMS 3.2 on Solaris. I've met all of the prereq's, patches, etc. It keeps failing on the Backup...It claims I need 15 Gig for the backup. The backup directory I'm using (/opt/backup) has 35 Gig free, so that shouldn't be the issue.
Here is the error I'm seeing in the backup.log;
okcwsi:tail backup.log
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2950-i6q4l2-mz.121
-13.EA1c.bin: prefix is greater than 155
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c1310-k9w7-tar.124-
10b.JDA2.tar: prefix is greater than 155
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2800nm-advsecurity
k9-mz.124-22.T1.bin: prefix is greater than 155
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c3560-ipbase-mz.122
-53.SE2.bin: prefix is greater than 155
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600-fpd-pkg.122-3
3.SRE1.pkg: prefix is greater than 155
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600s72033-advente
rprisek9-mz.122-33.SRE1.bin: file name too long
tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/20100922075
156561-10.181.252.1.cfg: No such file or directory
ERROR(704): Cannot create or back up tar file. Backup cancelled. Verify that you
have write-access to this directory.
Backup failed: 2010/09/22 07:54:20
okcwsi:
I've tried this multiple times and each time it appears to fail on a different file/folder in the sw_images directory. This is our FTP directory where we store lots of IOS images for download. I've removed each of these files it errors out on and it keeps failing. I just removed all files from the sw_images folder and am trying the backup again now.
I'm attaching the backup.log which contains the failure information for each backup I've tried in the past two days.
My main question is...can I skip this backup somehow? I've got another LMS 3.0 system that I can export everything I need from. Skipping the backup isn't an option on the install/upgrade? It gives me the option to quit the install or try the backup again.
Thanks,

You can skip the backup with a hidden option:
./setup.sh -b nobackup
However, I wouldn't feel comfortable until figuring out why the backup has been failing, ostensibly because tar is running into the 255-char limit (100 for the filename and 155 for the path), a result of the many iterations of the following:
sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/

LMS 3.1 Backup job Failing

Hello,
We have LMS 3.1 installed and the backup is failing with the following message
[Tue Feb 8 09:20:26 2011] ERROR(247): E:/Backup_3/backup.LOCK file exists
Most probably another backup process is running
[Tue Feb 8 09:20:26 2011] Backup failed: 2011/02/08 09:20:26
I tried to do the following, but it didn't work:
1- Run again the backup job, but specify a new backup directory folder (ex: E:/Backup_4/). --> Did not work
2- - Stop the Deamon Manager service using: net stop crmdmgtd --> Did not work
     - Delete the backup.LOCK file from the E:/Backup_3/ folder
     - Restart the Deamon manager service using: net start crmdmgtd
     - Run the backup job again using the new Folder destination.
Please Advise,
Regards,

I am currently working on a same issue with LMS 3.1 on windows;
After stopping dmgtd have you been able to delete the backup.lock or have you restarted the server?
In my case I was not able to delete the file and it turned out dbvalid.exe blocked this. The backup seems to run without any problems. When the backup is done dbvalid.exe trys to verify the backup database files. This validation fails and dbvalid starts dbsupport.exe to get some detail information on the failure and trys to send them to Sybase support. You should find (several ?) crash files here: %ALLUSERSPROFILE%\Application Data\SQL Anywhere 12\diagnostics. dbsupport.exe seems to be started interactively and thus hangs up waiting for some user input...
In the crash file I see dfmInv mentioned as the database which did not pass dbvalid. I assume I will end up reinitializing the dfm databases to recover - but let's wait and see. I found some hints that there could be a bug with dbvalid.exe form Sybase- not sure if this is the culprit or a real DB error. What I found really strange is the cli of dbsupport.exe (see the option -gui at the end... )
D:\PROGRA~1\CSCOpx\objects\db\win32\dbsupport.exe" -crash "C:\Documents and Settings\All Users\Application Data\SQL Anywhere 10\diagnostics\SA10_20110215_040218_4348.crash_log" -crashpn "dbeng10" -crashsn "dbvdfmInvEng" -gui
Also, I would quickly backout the last know good backup from the backup directory - just in case... (the one before the failure raised the first time)

LMS 4.0.1, backup failed.

Hello at all.
We are using CiscoWorks LMS 4.0.1.
Backup fails with this log entries:
mkdir D:/Backup\7\upm\database\
[Wed Aug 10 01:11:02 2011] Backing up database upm:SQL Anywhere Command File Hiding Utility Version 10.0.1.4051
The system cannot find the path specified.
[Wed Aug 10 01:11:04 2011] Backup upm to D:/Backup\7\upm\database\upm.db failed. Retry backup database upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4051
The system cannot find the path specified.
[Wed Aug 10 01:12:05 2011] Backup upm to D:/Backup\7\upm\database\upm.db failed second time.
[Wed Aug 10 01:12:05 2011] ERROR(1439): Database upm backup failed and . Check the log file for information.
[Wed Aug 10 01:12:05 2011] Backup failed: 2011/08/10 01:12:15
[Wed Aug 10 01:12:16 2011] Removing directory D:\Backup\7
[Wed Aug 10 01:12:22 2011] INFO: Notifying BackupFailureEvent.
How can I fix this error?
Thanks.
Regards.
Andrea

Sorry Afroj but I'm not able to reinit the UPM database: dbsrv10 missing.
We are using Windows 2003, 32 bit: we can find dbsrv10 into win32 folder.
C:\Program Files\CSCOpx\bin>perl dbRestoreOrig.pl dsn=upm dmprefix=UPM
WARNING: Existing contents of upm database will be lost.
Do you want to continue [y/n]?y
upm Unregistration failed
ERROR: [RegisterWithDM] UPMDbEngine: C:\PROGRA~1\CSCOpx\objects\db\x64\dbsrv10.exe missing or not executable
upm registration failed
INFO: Starting the DataBase
    Starting database engine UPMDbEngine
ERROR: Failed to authenticate [upm] database.
The system cannot find the path specified.
Opening C:\PROGRA~1\CSCOpx/dbupdate/CSCOdbupdate.log for logging
    Starting database engine cmfEng
Failed to delete the HUM jobs
Opening C:\PROGRA~1\CSCOpx/dbupdate/CSCOdbupdate.log for logging
    Starting database engine cmfEng
Failed to delete Pidm entries
Data cleanup for upm completed
upm database initialization failed.
C:\Program Files\CSCOpx\bin>
Regards.
Andrea

CiscoWorks LMS Backup Failed - Insufficient Disk Space

Hello,
I am experiencing backup failure on the LMS 3.2. Following is the message
Backup failed on 2010/08/14 at 23:11:11. REASON: Insufficient disk space on backup destination volume. Available Space is 65367892Kb and required space for backup is 78515097Kb.
Could you please assist as to why is 78GB of space required for the backup. The total size of main CiscoWorks folder 'CSCOpx' is only 33GB.
How can I identify which processes, folders are occupying more space thereby increasing the backup capacity. Also, are the previous backups, backed up again on subsequent runs. Please assist.
Thanks.

The LMS backup destination partition needs twice the space the backup will take (plus 10%) to copy out the files first before archiving them in the backup. Therefore, if the CSCOpx directory is 33 GB, your backup partition will require around 72 GB of free space.

LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file

Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r-----   1 casuser casusers    2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x---   2 casuser casusers     512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers     512 Dec 7 14:30 ..
-rw-r-----   1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
Lothar

Hi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour

EFI Folder on desktop during TimeMachine backup, backup fails.

Hello,
I am haing a very strange and infuriating problem. The problem is whenever my Time Machine begins to backup a folder shows up on my desktop labeled "EFI". The file size says 313.8MB, 312.6MB free. Then my Time Machine backup fails time and time again (pun intended).
The Time Machine is located on a MacMini Server, but even when I plug a TM drive directly into the USB it says the same thing and fails to backup. I've tired different brand drives but still the same outcome.
I then tired to clone the drive using SuperDuper but it can't even find the Macintosh HD. So I did a PRAM reset, repaired permissions, wiped and partitioned the drive and did a clean install of the current OS. I then used Migration Assistant to restore my data.
It ran fine for a day and now the same thing is happening all over again, but now it shows the EFI folder anytime I connect a USB or network drive onto it, plus it now takes a good 5 minutes to even boot.
I'ts absolutely maddening! Since I owned this laptop it's had the screen replaced twice as well as the logic board for random shutdown issues. I've begged and demanded for Apple to please replace this laptop since it was a month old. Sadly, Apple has refused any resolution other than to keep replacing parts and adding scratches. I purchased two twin units and the other unit has been whistling Dixie since day one. My son got one and I got stuck with the evil twin.
Any help would be greatly appreciated, but my guess is it is going to be shipped back to Apple for the 5th time.
Thanks for reading!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressingcommand-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

HT3728 My time capsule reports Backup Failed

After a year of more of faultless backups, suddenly my TC reports Backup Failed. I have tried to restart, dismount and remount, but it still reports Backup Failed. I have a 2T TC and use it to backup two Macbooks.

Any ideas?
Wireless Interference
Might be caused by a cordless phone in the vicinity. To give you an example, my neighbor.....across the street...used to be able to literally crash my wireless network if he was in his front yard talking on his cordless phone.
I discovered this by accident one day after spending weeks trying figure out why my network would crash at random times.
Other possibilities include a wireless security/camera system near you
Still other things might be an amateur ham radio operator....which should not interfere....but again from experience, I know that this can occur.
Yet another possibility is another wireless network near you that is being turned on and off at random times. Some users power up their modem/router only when they want to do so and leave it off otherwise.
Some general rules to help avoid interference:
Move any cordless phones that you might have as far away as possible from the Time Capsule and/or your computer(s)
Avoid placing other electronic devices....computer, television, amplifier, satellite receiver, etc. near the Time Capsule and/or your computer(s)
Avoid metal surfaces near the Time Capsule and/or your computers
Elevate the Time Capsule as much as possible. Think of it as a water sprinkler....you want to get the room as wet as possible
Experiment with different wireless channels on the Time Capsule. To do this:
Open AirPort Utility
Click on the Time Capsule
Click Edit
Click the Wireless tab
Click Wireless Options
Start with Channel 11 on the 2.4 GHz band and work your way down
It is unlikely that you are picking up interference on the 5 GHz band since there are.....for now at least.....far fewer networks using this frequency.

Cisco Works LMS 3.2 backup takes too long time to finish

Hello guys,
We have problem with scheduled LMS 3.2 backup. It takes more than 12hours to finish. You can see in log that backup is scheduled for 18:00h and it waits untill 22:07 to start doing anything. We can't figure out why is there such a delay. It started to happen after system reported lack of free space on disk. And we feed up the space, but then faced this problem with long duration. Before this problem occured backup used to last for 45 min od 1 hour.
Backup to 'C:/BACKUP' started at: [Mon Apr 11 18:01:26 2011]
Apps file : D:\\PROGRA~1\\CSCOpx\\backup\\manifest\\campus\\properties\\datafiles.txt
[Mon Apr 11 22:07:07 2011] Archiving the contents of the following directories into C:\BACKUP\2\campus\filebackup.tar
[Mon Apr 11 22:07:07 2011] D:\PROGRA~1\CSCOpx\campus\etc\cwsi\DeviceDiscovery.properties
D:\PROGRA~1\CSCOpx\campus\etc\cwsi\ANIServer.properties
D:\PROGRA~1\CSCOpx\campus\etc\cwsi\ut.properties
D:\PROGRA~1\CSCOpx\campus\etc\cwsi\discoverysnmp.conf
D:\PROGRA~1\CSCOpx\campus\etc\cwsi\datacollectionsnmp.conf
Do you have any ideas what went wrong and how to fix it?
Thanks,
Marija

This is a catch 22 , you need to apply a patch to fix a backup problem , yet you want to backup before applying a patch. This is where you will have to assume some risk, and apply the patch w/o a backup.
Go to Common Services -> Device and Credentials -> Device Mgmt and export the entire DCR (All devices) to a CSV file. Make sure you browse to someplace outside application space, I usually place the file at c:\. Also make sure you check mark the include credentials box, so you also have all your device passwords. This is your D/R plan, if things were to fail you will have your device list you can import in an emergency.
Or you can try the suggestion of clearing DFM to mitigate potential loss so you can get a good backup of the rest of LMS. Just be sure to view your notifications and cut/paste into note pad so they can be rebuilt. You will lose history and local customizations to Polling and Thresholds and DDV.
# net stop crmdmgt
kill any sm_* / brstart processes still running
# cd ...\CSCOpx\bin
# perl dbRestoreOrig.pl dsn=dfmInv dmprefix=INV
# perl dbRestoreOrig.pl dsn=dfmFh dmprefix=FH
# perl dbRestoreOrig.pl dsn=dfmEpm dmprefix=EPM
Use explorer to go to ...\CSCOpx\objects\smarts\local\repos\icf and delete all .rps files
perform the backup.

Problems with LMS 2.6 backup (error 1226)

Hi.
I am tryinng to take a backup from LMS 2.6 in a Windows 2003 system. The backup appears to finish, and some files are generated in the backup directory, including one named filebackup.tar, wich seems to be the RME database backup, but the log file states an error: ERROR(1226): Database rmengdb backup failed. I can't find out what is causing this. I am taking this backup for migration purposes.
Thanks in advance.

Thank you for your reply.
Here goes the log for the latest backup attempt.
Backup to 'W:/backup_new2' started at: [Fri Jun 18 15:14:30 2010]
Archiving the contents of the following directories into W:/backup_new2\0\campus\filebackup.tar
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\DeviceDiscovery.properties
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\ANIServer.properties
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\discoverysnmp.conf
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\datacollectionsnmp.conf
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\Snmpv3EngineParam.txt
W:/PROGRA~1/CSCOpx/campus/etc/cwsi\UTSnmpv3EngineParam.txt
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/users
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/archives
W:/PROGRA~1/CSCOpx/campus/etc/users
W:/PROGRA~1/CSCOpx/campus/etc/cwsi/ReportArchives
W:/PROGRA~1/CSCOpx/htdocs/campus/maps
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\cmf\filebackup.tar
W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/cmf/servlet\cwpass
W:/PROGRA~1/CSCOpx/lib/classpath\sso.properties
W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/dcr\dcr.ini
W:/PROGRA~1/CSCOpx/MDC/Apache/conf/ssl
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security\secret.dat
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfig.xml
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfigModule
W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/xms/psu/maps
W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic/registered-templates
W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic\cmic.xsd
W:/PROGRA~1/CSCOpx/conf\logstat.conf
W:/PROGRA~1/CSCOpx/etc/licenses
W:/PROGRA~1/CSCOpx/MDC/etc\regdaemon.xml
W:/PROGRA~1/CSCOpx/lib/classpath\comUser.dat
W:/PROGRA~1/CSCOpx/lib/classpath\ccoUser.dat
W:/PROGRA~1/CSCOpx/lib/classpath\proxy.properties
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\dfm\filebackup.tar
W:/PROGRA~1/CSCOpx/objects/smarts/conf
W:/PROGRA~1/CSCOpx/objects/smarts/local/conf
W:/PROGRA~1/CSCOpx/objects/smarts/local/repos
W:/PROGRA~1/CSCOpx/objects/smarts/local/logs
W:/PROGRA~1/CSCOpx/setup\dfm.info
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Archiving the contents of the following directories into W:/backup_new2\0\rmeng\filebackup.tar
W:/PROGRA~1/CSCOpx/files/rme/jobs/swim
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/conf/swim/kb
W:/PROGRA~1/CSCOpx/files/rme/swim/advdistinput
W:/PROGRA~1/CSCOpx/files/rme/jobs/syslog
W:/PROGRA~1/CSCOpx/files/scripts/syslog
W:/PROGRA~1/CSCOpx/files/rme/syslog
W:/PROGRA~1/CSCOpx/files/rme/jobs/cda
W:/PROGRA~1/CSCOpx/files/rme/jobs/cctool/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/cctool/scase\SmartCase.properties
W:/PROGRA~1/CSCOpx/files/rme/jobs/bugtool/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/bugtool\Bugtool.properties
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/csc/data\Collector.properties
W:/PROGRA~1/CSCOpx/files/rme/cfgedit
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/config/cfgedit\ConfigEditor.properties
W:/PROGRA~1/CSCOpx/setup\rme.info
W:/PROGRA~1/CSCOpx/files/rme/repository
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/repository/common\repository.properties
W:/PROGRA~1/CSCOpx/files/rme/jobs/NetShow
W:/PROGRA~1/CSCOpx/files/rme/NetShow/ShowCommandArchive
W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/archives
W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/jobs
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/fcss/data\TimeZone.lst
W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/util/logger\rmelog.cfg
W:/PROGRA~1/CSCOpx/files/rme/dcma
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveMgmt
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePoller
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePurge
W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveUpdate
W:/PROGRA~1/CSCOpx/files/rme/jobs/cas
W:/PROGRA~1/CSCOpx/files/rme/changeaudit
W:/PROGRA~1/CSCOpx/files/scripts/changeaudit
W:/PROGRA~1/CSCOpx/files/rme/jobs/NetConfigJob
W:/PROGRA~1/CSCOpx/files/rme/jobs/cri/purgejobs
W:/PROGRA~1/CSCOpx/files/rme/cri/archives
/cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
Backing up database aniDb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
(68183 of 68183 pages, 100% complete)
(2 of 2 pages, 100% complete)
Database backup completed
Command file created using Adaptive Server Anywhere Command File Hiding Utility.
Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Validation Utility Version 9.0.0.1383
No errors reported
Command file created using Adaptive Server Anywhere Command File Hiding Utility.
Backing up database rmengdb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed. Retry backup database rmeng
Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
Database backup failed
Database backup not started
Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed second time.
ERROR(1226): Database rmengdb backup failed and . Check the log file for information.
Backup failed: 2010/06/18 20:25:28

ACS 5.3.0.40 On-demand Full Backup failed.

Hi,
I have ACS 5.3.0.40 Primary Secondary Authenticators , of which the Scheduled backup has stopped.
When checked the :
Monitoring Configuration >
System Operations >
Data Management >
Removal and Backup
> Incremental Backup , it had changed to OFF mode. without any reason.
The same was observed earlier too.
I have made the
Incremental Backup to ON and intiated the
View Full Database Backup Now. But it wasn't successful and reported an Error:
FullBackupOnDemand-Job Incremental Backup Utility System Fri Dec 28 11:56:57 IST 2012 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed
Later i did the acs stop/start "view-jobmanager" and initiated the On-demand Full Backup , but no luck, same error reported this time too.
Has any one faced similar type of error /problem reported , please let me know the solution.
Thanks & Regards.

One other thing; if this does end up being an issue with disk space it is worth considering patch 5.3.0.40.6 or later since improves database management processes
This cumulative patch includes fixes/enhancements related to disk management to avoid following issue
CSCtz24314: ACS 5.x *still* runs out of disk space
and also fix for
CSCua51804: View backup fails   even when there is space in disk
Following is taken from the readme for this patch
   The Monitoring and Reporting database can increase when as records are collected. There are two mechanisms to reduce this size and prevent it from exceeding the maximum limit.
1. Purge: In this mechanism the data will be purged based on the configured data retention period or upon reaching the upper limit of the database.
2. Compress: This mechanism frees up unused space in the database without deleting any records.
Previously the compress option could only be run manually. In ACS 5.3 Patch 6 there are enhancements so it will run daily at a predefined time, automatically when specific criteria are met. Similarly by default purge job runs every day at 4 AM. In Patch 6 new option provided to do on demand purge as well.
The new solution is to perform the Monitoring and Reporting database compress automatically.
2.       New GUI option is provided to enable the Monitoring and Reporting database compress to run on every day at 5 AM. This can be configured under GUI Monitoring And Configuration -> System Operations -> Data Management -> Removal and Backup
3.       Changed the upper and lower limit of purging of Monitoring and Reporting data. This is to make sure at lower limit itself ACS has enough space to take the backup. The maximum size allocated for monitoring and reporting database is 42% of /opt( 139 GB). The lower Limit at which ACS purges the data by taking the backup is 60% of maximum size Monitoring and Reporting database (83.42 GB). The upper limit at which ACS purges the data without taking backup is 80% of maximum size Monitoring and Reporting database (111.22 GB).
4. The acsview-database compress operation stops all services till 5.3 patch 5 , now only Monitoring and Reporting related services are stopped during this operation.
5. Provided “On demand purge” option in Monitoring and Reporting GUI. This option will not try to take any backup, it will purge the data based on window size configured.
6. Even if the “Enable ACS View Database compress” option is not enabled in GUI then also automatic view database compress will be triggered if the physical size of Monitoring and Reporting database reached to the upper limit of its size.
7. This automatic database compress takes place only when the “LogRecovery” feature is enabled, this is to make sure that the logging which happens during this operation will be recovered once this operation is completed. ACS generates alert when there is a need to do automatic database compress and also to enable this feature.
8. Before enabling “LogRecovery” feature configure the Logging Categories in such way that only mandatory data to log into Local Log Target and Remote Log Target as Log collector under System Administration > ... > Configuration > Log Configuration
This “LogRecovery” feature can recover the logs only if the logs are present under local log target.
9       This automatic database compress operation also performed only when the difference between actual and physical size of Monitoring and Reporting database size is > 50GB.
10 The new CLI “acsview” with option “show-dbsize” is provided to show the actual and physical size of the Monitoring and Reporting database. This is available in “acs-config” mode.
           acsview     show-dbsize     Show the actual and physical size of View DB and transaction log file

ACS 5.3 Backup fails

ACS 5.3 on VM- backup fails all the time. I opened several tickets with Cisco, but still no luck.
Here is one of the log message I got during the backup. Maybe someone can point out what the issue is.
debugd[2933]: [31965]: config:kron: cs_api.c[1142] [daemon]: occurrence occurrence_backup1 could not be deleted.

I just did it on my ACS 5.4 patch 6 (running on VMWare) backup to a Windows 2003 FTP server and it works without any issues:
repository ftp_192.168.1.129
url ftp://192.168.1.129/
user Administrator password hash e50ffb9aabc8ccebe066f6239efeaa1ab728a16f2b2
labacs2/admin# backup labacs2 repository ftp_192.168.1.129
% Creating backup with timestamped filename: labacs2-140628-2059.tar.gpg
Calculating disk size for /opt/backup/backup-labacs2-1403989173
Total size of backup files are 27 M.
Max Size defined for backup files are 13339 M.
labacs2/admin#

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Custom XML Publisher Reports in EBS 11.5.10.2 Fails Randomly

Hi Experts,
I have a Custom XML PUblisher Report Concurrent Program in EBS 11.5.10.2.
The Report fails randomly with a Warning. I get the following error,
[11/21/08 12:17:21 PM] [UNEXPECTED] [915997:RT3085490] java.io.FileNotFoundException: /u01/PROD/prodcomn/admin/out/PROD_irl-dub-finmdt-01/o3085490.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
As you can the OPP fails to find the o3085490.out file in the $APPLCSF/$APPLOUT directory and actually the file is not there in the unix box on that location.
If the same report is submitted again it Works fine, But not at all times.. some of them fails with the above error message.
Any pointers to solve this one.
Regards

Hi,
We are on Multi-node set up with two middle-tiers with a load balancing option Yes.
The XML Publisher Version is 5.6.0. Is it required to move to 5.6.3 ?
Please find a detailed explaination of the issue.
Issue
XML Publisher Reports Fails Randomly in Production
Detailed Explaination
XML Publisher Reports submitted in Production completes with Warning. You can say 1 out of 4 requests submitted in a sequence will fail.
The Log message of the COncurent Program is something like this,
------------- 1) PUBLISH -------------
Beginning post-processing of request 3091786 on node IRL-DUB-FINMDT-01 at 23-NOV-2008 15:36:58.
Post-processing of request 3091786 failed at 23-NOV-2008 15:36:58 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Checking the Output Post Processor Log gives the following message
[11/23/08 6:25:01 PM] [UNEXPECTED] [925353:RT3092523] java.io.FileNotFoundException: /u01/PROD/prodcomn/admin/out/PROD_irl-dub-finmdt-01/o3092523.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Its evident from the message the output file for the request is not generated.
Some Findings to pass on to Version 1
1. Report in not picked up for execution in this case as even the first statement is not executed and there is no oracle session and os process asscociated with it.
I enabled trace and the trace was generated only for the successful ones and it was never generated for the ones completed with warning.
2. The below query gives no values for the failed concurrent request, where as all successful ones have valid values.
SELECT oracle_process_id,oracle_session_id,os_process_id
FROM fnd_concurrent_requests
WHERE request_id = 3091786
Regards

LMS 4.2 Backup Failing Randomly

Similar Messages

Maybe you are looking for