LMS 4.2 compliance reports for the User-Defined Policy Groups.

Dear team,
I need your help to know if i will be able to export compliance reports in PDF or CSV for the User-Defined Policy Groups.
I have checkedk the reports tab and i was able to export compliance reports in PDF format inly for the system defined policies but i couldn't i find any option to export these reports for the a user defined compliance policy.
Kindly let me know if this is possible.
Regards,
Muhannad

Dears,
Do anyone have an idea about this question?
Regards,
Muhannad

Similar Messages

Approval Templates for the User Defined Object(UDO)

Hi,
I just wanted to check whether the Approval Templates for the User Defined Object(UDO)...i.e. Said to the User Defined Form..
if possibe how it can be done.....
Thanks in Advance,
With Regards,
MadhuSudhana Rao.G

Hi MadhuSudhana Rao,
The function you requested is not available yet.
Thanks,
Gordon

SAP BW reports for the users?

Hi,
i have a scenario in my new project. i have given all standard reports to the users and apart from these reports they are asking for new reports which uses for their activities. we have SD, FI,MM,HR and PM modules are there. they are not giving me any requirement but they are asking me to give some ideas and create reports.
How can i proceed in these case and i dont have any functional knowledge. Kindly suggest.
Thanks

Hi,
My Suggestion will be first check with SD, FI,MM,HR and PM modules related ECC reports and then check standard reports in BI either possible to match with ECC reports .
IF not then try to analyze existing reports of each module in ECC & check is there any possibility of using standard D.S & standard Cubes for those reports then create reports for the same in BI.
IF possible try to interact with functional team they can help in giving exact Bushiness Requirement.
Regards,
Seshu.P

KM Search: How can I define a query for the user who currently logged on?

Hello,
I want to use the KM Search iView to display all documents from the currently logged on user in a certain sort order. The result should be some kind of report for the user...
In the search option I can define a default sort order. And I can also define it for a special user with cm_modifiedby(value=username)
But how can I define the predefined property value generically for the current user?
I tried to insert following values in the parameter Predefined Properties of the search option:
Predefined Properties (csv): cm_modifiedby(value=<user.id>)
Predefined Properties (csv): cm_modifiedby(value=%user.id%) -> like in the predefined properties
Predefined Properties (csv): cm_modifiedby(value=$sap_user) -> like in the xml forms builder
But non of these 3 parameters worked. Has anybody an idea what the right variable is?
Thanks a lot.
Best regards
Nicole

Hi Nicole,
1. First of all you need to use "<User.UserID>" to get the currently logged on user.
2. You need to create an AppIntegrator iView (so based on com.sap.portal.appintegrator.sap.Generic) in order to be able to use this dynamical parameter. The parameter "URL template" should look like:
<Request.Protocol>://<Request.Server>/irj/servlet/prt/portal/prtroot/com.sap.km.cm.basicsearch?layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=quick&rndLayoutSet=SearchResultLayoutSet&SearchCompsName=UISearchComponents&QueryString=*&SelectedCustomProps=cm_modifiedby(value=<User.UserID>)
Best regards,
Robert

Web Logic Optimize the User-defined typed values

I'm using Together Soft 6.0.1 and Web Logic 7.0 as apps. server. I'm writing
the web service using the user defined type as input parameter and return status.
I'm experience the following probem
1. On the web service, the return status is an array user-defined data type.
Some of the data has the same values.
2. When I looked at the SOAP/XML message as the returned status, the fields/tags
that have the same data got mapped to a href=#ID_x and on the bottom of the SOAP/XML
message the ID_x is mapped to the correct data value.
3. However, when the SOAP/XML message is mapped to the client's object, the data
did not get mapped correctly to the object's attribute. The attributes, that
got mapped to href=#ID_x, are set to empty value.
I wrote the serialize/deserialize code for the User-Defined type, and that works
ok. However, when I return an array of User-Defined type, and only have the serialize/deserialize
code for the User-Defined type but no code for the array, it throws an exception
(Array out of bound).
It looks like Weblogic creates a reference table appended to the message with
duplicate values indexed. Is it some kind of performance option you can turn
off?
Or is there some interface to retrieve the references?
Or is there a work around or a fix to this problem?
Or do I have to write the serialize/deserialize codes for the user-defined type
and array of user-defined type?
Thanks for your help,
Michelle

Scott,
Thanks for your response.
So you're saying the href "optimization" is a feature of soap encoding. Is it
the Web Logic implementation of soap encoding optimize the values?
If we write xxxCodec.java for the array of user-defined type, will it work?
If it does, could you send me sample code? The example in the document is for
a single class. The array seems to be more complicated.
Thanks for your help,
Michelle
[email protected] (Scott Ziegler) wrote:
I would suggest using a document-literal style webservice. The
literal part avoids soap encoding which is responsible for the href
"optimization".
--Scott
In article <[email protected]>,
Michelle Hoang <[email protected]> wrote:
I'm using Together Soft 6.0.1 and Web Logic 7.0 as apps. server.
I'm writing the web service using the user defined type as input
parameter and return status. I'm experience the following probem
1. On the web service, the return status is an array user-defined
data type. Some of the data has the same values.
2. When I looked at the SOAP/XML message as the returned status, the
fields/tags that have the same data got mapped to a href=#ID_x and on
the bottom of the SOAP/XML message the ID_x is mapped to the correct
data value.
3. However, when the SOAP/XML message is mapped to the client's
object, the data did not get mapped correctly to the object's
attribute. The attributes, that got mapped to href=#ID_x, are set to
empty value.
I wrote the serialize/deserialize code for the User-Defined type, and
that works ok. However, when I return an array of User-Defined type,
and only have the serialize/deserialize code for the User-Defined
type but no code for the array, it throws an exception (Array out of
bound).
It looks like Weblogic creates a reference table appended to the
message with duplicate values indexed. Is it some kind of
performance option you can turn off? Or is there some interface to
retrieve the references? Or is there a work around or a fix to this
problem? Or do I have to write the serialize/deserialize codes for
the user-defined type and array of user-defined type?
Thanks for your help,
Michelle

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Genearate a Report for the following data

Hi All
The following is of my requirement
Selection Screen Should be as follows:
Plant (required) QALS-WERK
Storage Location MCHB-LGORT
Material Number QALS-MATNR
Batch Number MCHB-MATNR
MRP Controller MARC-DISPO
Inspection Lot Number QALS-PRUEFLOS
Inspection Lot Creation Date QALS-ENSTEHDAT
Inspection Lot Origin QALS-HERKUNFT
PO Number QALS-EBELN
Vendor # EKKO-LIFNR
Goods Receipt Date MKPR-BUDAT
Delivery Number QALS-KTEXTLOS
Marked in House Date
Sterile Load # ZC012-STBAT
Supplying Plant EKKO-RESWK
Profit Center QALS-PRCTR
Radio Buttons for Selection Screen:
 Show all stock (not just Q stock)
 Show only past due stock (GR Date + GR processing time > today)
 Include Serial Numbers
Fields for report:
Plant QALS-WERK
STO/PO QALS-EBELN
Delivery/Production Order # QALS-KTEXTLOS
Sterile Load # ZC013-STTYP
Inspection Lot Number QALS-PRUEFLOS
Material QALS-MATNR
Old Material MARA-BISMT
Serial #s (all serial #s with material ITOB-SERNR
batch combination)
Batch QALS-CHARG
Sloc (all SLOCs with Q status items) MCHB-LGORT
Batch Exp Date DFBATCH-MHD_IO
Quantity (in each SLOC) MCHB-CINSM
Profit Center QALS-PRCTR
Date Marked In House ZTMODE-TDATE
GR Date QALS-ENSTEHDAT
Expected GR Processing Time MARC-WEBAZ
Date Moved to NCMR MKPF-BLDAT
Days in House System date ZTMODE-TDATE
Days in QI System date - QALS-ENSTEHDAT
Days from QI QALS-ENSTEHDAT - MKPF-BLDAT
Days in NCMR System date - MKPF-BLDAT
MRP Controller MARC-DISPO
MRP Controller Name T024D-DSNAM
Standard Cost MBEW-STPRS
Extended Standard Cost MCHB-CINSM * MBEW-STPRS
How we can develop a report for the above, because they havn't given any conditional checking. Supress if any Ztables used.
i would appreciate if you can send an earliest reply and reward points for the same.
if any queries just reply me i can clarify.
Regards
Prabhu

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

How to email report to the users

Hi,
I have a few reports in 6i. I can preview them but cannot mail them to the users. When I click on the mail icon, it gives me this error :
REP-4203: Error occurred while sending a mail message.
Second option I did was to directly create a pdf report but this doesnt work either. I gave the desformat as pdf, desname as c:\myreport.pdf, mode as default, destype as File and printjobs No.
I ran the report and it did something. But now when I search in my C:\ I cannot find the pdf report there. I also did a search but cannot find it anywhere.
Please let me know how to develop a pdf report or how to email a preview report to the users. I need to send the report to my users but both the options dont work.
Thanks in advance.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How to Block Account member in input reporting for some users?

Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio Vazquez

I would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps.

BI 7.0 version report for anonymous user

Dear Gurus,
Greetings for the day!
I want to display the BEX BI 7.0 version report on Portal 7.0 for anonymous user. But I am not able to do the same. Can somebody please help me to achieve my task. Thanks.
Regards,
P.Swarna

HI,
Thanks for your reply,
Its already configured and the reports working perfectly with login user ids( like end user).But when we assign same report
to anonymous user with authentication scheme = anonymous in iview properties still its redirecting to logon page.
Please suggest how to configure BI 7.0 report for anonymous users.
Regards,
P.Swarna

How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

Developed a report for the daily production done.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report for the daily production done.
thanks in advance,
radhakrishna

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

Authority Check at the T.Code level for the user in particular User Group

Hi Friends,
I have created a ZREPORT and assigned this report to a ZTRANSACTION CODE.
Need to give Authority Check at the T.Code level for the user in particular User Group.
I have searched in SCN, but not get suitable pages.
How to solve this?
Regards,
Viji.

Hi Viji.
Saha way is actual way for authority tcode but user authority in TCODE:- SE38 he/she can run report(ZREPORT) wise program is run is no authority check.
Another way is you have also check authority in program level.
DATA: T_ROLE_USERS TYPE STR_AGRS OCCURS 0 WITH HEADER LINE.
   INITIALIZATION.
CALL FUNCTION 'ESS_USERS_OF_ROLE_GET'
    EXPORTING
      ROLE       = 'ZROLE'' " Role define
    TABLES
      ROLE_USERS = T_ROLE_USERS.
READ TABLE T_ROLE_USERS WITH KEY UNAME = SY-UNAME.
   IF SY-SUBRC NE 0.
   RETURN.
   ENDIF.
Thanks & Regards
Rahul

Unifier Table name used for storing User-Defined Reports Information

Hello Everyone,
I am looking for the table name that stores all the User-Defined Reports information pertaining to report creation details. I want to create a dataview that will provides all the user-defined reports the system presently had on file.
Does anyone know about the system auto-created table name for User Defined Reports. It might start with "sys_"
Thanks

For custom reports, you can find them through data views - "sys_custom_report". I am wondering why UDR tables were not included.
The only effort left is manually copy pasting each name and information from Unifier on an Excel sheet. It will take a lot of time though. I will also log a SR meanwhile.
Thanks everyone for your help.

LMS 4.2 compliance reports for the User-Defined Policy Groups.

Similar Messages

Maybe you are looking for