LMS 4.2 Performance Monitor

Hi All.
I have encountered an error while creating the new poller by selecting the interfacerror template.
Is it the license limitation?? if license limitation how can i find out the current devices count in the performance monitor page ??
Find the attached errors.
Regds,
Channa

OK, your license appears to be in order.
To check the number of devices under performance management, please see Admin > Dashboards > Device Status. You should see something like the screenshot below.
If the count on the status display is less than your 100 device license you should be be able to create new pollers. If the count is under your license total and you still cannot create pollers, you may be seeing a bug and a TAC case is in order.

Similar Messages

Internetwork performance Monitor (IPM) issue of CiscoWork LMS 2.5

Im implementing IPM 2.6 module on Ciscoworks. To analysis ICMP traffic from Source to Destination, I have made 1 IP Echo entery of source & target, where source is RouterA serial IP & Target is RouterB Serial IP. Now if Normal Ping happens from Router A to B. Traffic analysis & delay displays at IPM. Now I move one another entry where Source Router A & Destination Router C Serial IP. Now Problem begins. Due to some policies, Router A cant make normal Ping to C but extended ping happens for same but IPM cant capture extended ping traffic & delay. It always show Request timed out. Now Im stuck. Its very necessary to resolve. Waiting..

Dan,
IPM and LMS 3.2 are EOS/EOL. But the features are still available in the latest version of LMS, aka, Cisco prime LMS 4.2.
Cisco Prime LMS 4.x onwards the module specific approach was re-structured to feature centric menu, and hence Cisco Prime LMS 4.2 has all the required + enhanced IPM features.
You can upgrade to LMS 4.2, however, we encourage everyone to move to Cisco Prime Infrastructure, which is more future proof, as Marvin recommended.
IPM feature in Cisco Prime LMS 4.2 is known as Performance Management.
For more details check :
Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.2
Performance Management
Cisco Prime LMS 4.2 and Cisco Prime Infrastructure 2.2 Functional Comparison
-Thanks
Vinod
**Encourage Contributors. RATE Them**

LMS - Internal CSU/DSU monitoring question

I have a question about LMS's ability to monitor internal CSU/DSU's.
We're thinking about replacing all of our external CSU/DSU's with internal Cisco CSU/DSU's in all of our routers. I was wondering if any of the LMS versions 3.1, 3.2, or 4.0 have the ability to monitor or trap on circuit errors from that CSU/DSU. I have not worked on a router with a CSU/DSU in it yet, so I'm just unsure of all the logs that may come from it. Does syslog contain logs on circuit errors that LMS will recieve?
We're looking to use the NM1-T3 CSU/DSU module if that helps answer any of these questions. I couldn't find anything on it in the documentation. We're currently running LMS 2.6, but if this requires 3.2 we can move to that.
Thank you guys so much for the help. This forum has always been so great for these types of questions

There are no CSU/DSU specific portions of LMS. However, as you know, LMS can process syslog messages and perform actions based on patterns in those messages. I don't know off hand of the specific sysog messages related to this NM. However, you might try asking about those on the WAN Routing community, or look through the system error messages guide on Cisco.com for your version of IOS.
Another option is you can use the Embedded Event Manager on the device to run CLI commands (i.e. show commands), parse the output, and produce syslog messages that can be processed by LMS. This way, if there is a specific show command output you want to monitor, you can do that, and still have RME take action.
While LMS 2.6 has all of the syslog hooks you'll need, LMS 3.2 (and 4.0) has the Health and Utilization Monitor feature (called Performance Monitor in LMS 4.0) that will allow you to poll MIB objects on your device and take action based on thresholds being crossed. If your device and IOS support the CISCO-ICSUDSU-MIB, there are some good error related objects there you could poll using HUM (e.g. the objects in the ciscoICsuDsuT1StatusTable).

Internetwork Performance Monitor

Hello Friends,
In LMS 4.0 Internetwork Performance monitor, when i try to configure collector configuration, in source devices only 2 switches are available i.e 6500 and 3560 but in Target devices i m able to see 32 devices what i have discovered in DCR,
Why that so,can anybody help me to understand such issue.
Thanks

Hello Dears,
Manually Importing DCR Devices.
You can manually add devices to IPM by deselecting the Enable Auto Mode option and select the Apply button in the Internetwork Performance Monitor > Admin > Auto Allocation Settings page. Then go to Internetwork Performance Monitor > Collector Management > Devices and click Add Devices.
I m using LMS 4.0, the path above is not same in LMS 4.0 there is no Add devices tab to add devices manually but there is a Add Adhoc devices Tab which i can use to add devices manually??
when there is enable auto mode then why these devices are not imported in IPM automatically, Devices are imported by RME,CM,and also in DFM,but why not in IPM.As per the attachement in previous mail how come these 2 devices were imported in IPM.

What's the replacement of CiscoWorks Internetwork Performance Monitor (IPM)?

Hi There
I am using a quite old tool - Ciscoworks IPM 2.5 with CWRW-1.3 in my teaching lab installed in 2004. IPM is good tool for network lab working with Cisco 3700 routers. Now I am trying to find latest IPM version to upgrade the lab. I find that latest IPM is version 4.2 with Ciscoworks LAN management Solution 3.2 only. But this production is also end-of-sale and end-of -support see the page -http://www.cisco.com/c/en/us/support/cloud-systems-management/ciscoworks-lan-management-solution-3-2/model.html
- End-of-Sale Date: 08-APR-2011 Details
- End-of-Support Date: 30-APR-2014 Details
Now I have no idea how to upgrade IPM? Which tool from Cisco or a third party can be replacement of IPM?
Dan Li,
Concordia University

Dan,
IPM and LMS 3.2 are EOS/EOL. But the features are still available in the latest version of LMS, aka, Cisco prime LMS 4.2.
Cisco Prime LMS 4.x onwards the module specific approach was re-structured to feature centric menu, and hence Cisco Prime LMS 4.2 has all the required + enhanced IPM features.
You can upgrade to LMS 4.2, however, we encourage everyone to move to Cisco Prime Infrastructure, which is more future proof, as Marvin recommended.
IPM feature in Cisco Prime LMS 4.2 is known as Performance Management.
For more details check :
Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.2
Performance Management
Cisco Prime LMS 4.2 and Cisco Prime Infrastructure 2.2 Functional Comparison
-Thanks
Vinod
**Encourage Contributors. RATE Them**

How to genarate performance monitoring report in SAP PI automatically

Dear All,
I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI and send it to business users.
As per my understanding, this can be achieved by pulling the data every month from the tables where these data of Performance monitoring is maintained internally within SAP PI.
Please provide me inputs as which table stores these data/ and solutions to acheive this.
Thanks
Azahar

Refer below links .. You can write abap report to make it happen
Re: Get count of the messages to particular Interface in a day and send email
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
http://wiki.sdn.sap.com/wiki/display/XI/UsefulABAPtablesinSAP+XI

HELP: failed to deploy and run WL performance monitor, console extension

Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war.
java.io.FileNotFoundException: No such path: null\java\FenwayWL.war
     at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
     at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
     at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
     at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

In order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

HELP: failed to setup and run WL performance monitor, console extension on WL 8.1

Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException: No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

In order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso

How do I write/use performance monitor to run an action when something happens?

I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
That's fine.
I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory. I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
in Virtual and working memory. At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
second dropouts) It can even cause a complete system lockup
So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it. (restarting it will cause the problem to go away for anywhere from a few hours to several days).
I've no clue as to what triggers it.
I found a bunch of XML scripts in
Windows/pla/Rules with names like:
Rules.System.CPU.xml*
Rules.System.Common.xml*
Rules.System.Configuration.xml*
Rules.System.Diagnostics.xml*
Rules.System.Disk.xml*
Rules.System.Finale.xml*
Rules.System.Memory.xml*
Rules.System.NetDiagFramework.xml*
Rules.System.NetTrace.xml*
Rules.System.Network.xml*
Rules.System.Performance.xml*
Rules.System.Performance.xml.orig*
Rules.System.Summary.xml*
Rules.System.Wired.xml*
Rules.System.Wireless.xml*
These have some XML language in them that looks like it woud be for monitorying and doing actions:
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
Question is, how can I setup it for calling a trigger script when
parameters for Explorer get out of spec.
On confusing issue that stopped me from proceeding, was the time schedule to run the report:
I only allows for once/day.
I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
So how can I monitor and control it?
A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
just a feeling...
Thanks!
Astara...

You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
into alert action, please follow the instruction in the link below.
Monitor disk space
http://www.ms-opsmgr.eu/?cat=43
If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Help needed in getting real time system performance monitor

Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Regarding performance monitoring of RWB

As far as I know , there are two ways to show the data through performance monitoring.One is [overview data],the other is [detailed data].My question is,my [overview data] is displayed successfully,but [detailed data] doesn't display anything.Some parameter need to set for [detailed data]?
Any help would be appreciated.
Brand.

Hi Brand,
If detailed data is missing i think some settings were missed & just go thru the links given below ur problem will be solved
Can you check the following function modules. In SE37 look for FMs "SXIPERF*" . You will get
SXIPERF_RUNTIME XI Performance: Runtime
SXIPERF_RUNTIME_VERI XI Performance: Runtime
SXIPERF_CONFIG XI Performance: Configuration
SXIPERF_EVALUATE XI Performance: Evaluation
SXIPERF_GET_TRANSID XI Performance: Transaction ID
Refer this SAP Note-768456
Message Montioring errors- SAP Note-928862
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/content.htm
Try to perform SLDCHECK First If you face any problem means Use this Help file to solve the Issue
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards,
Vinod.

PI 7.1 Performance Monitoring - Advanced Adapter Engine (AAE)

Hi Experts,
how can i use the "Performance Monitoring" from the RWB, to see all the messages (including the messages from the AAE) for a specific timeperiod? For example, i want to know how many messages go through the PI (including AAE) on one day.
Best regards,
Sven

Hi Sven,
Kindly find the below documents will helps you more
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c02dde55-b30d-2c10-a68b-e80e0d86336d
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10cf9746-e819-2c10-bd82-97bfbde8214a
Regards
Venkat Rao .G

PI 7.1, RWB Performance monitoring error

Dear experts,
     We are using PI 7.1 version SP5, recently service pack updated to 12 by BASIS. Whenever I am trying to check the performance monitoring in RWB. getting an error saying below :
   " 3 Message(s) : Connection to Integration Server Lost - Error class com.sap.aii.proxy.framework.core.BaseProxyException: Concurrent call in detected. Connection [31] currently used in another thread:HTTP Worker [@1221137961] [142] in execute since 490394 ms.Current thread:HTTP Worker [@2014230334] [143], action: execute., error key: JCO_ERROR_CONCURRENT_CALL - No component names available from Integration Server "
     The issue happening in PROD environment and bit urgent.
     Please suggest you valuable thoughts to resolve the above.
Thanks
Ravi

Hi Ravi
Check the following blog, might help you.
JCO_ERROR_CONCURRENT_CALL: Concurrent call.
No component names available from Integration Server
Regards
Osman

Error in Performance monitoring in RWB

Hello,
I'm getting error while opening Performance Monitoring in RWB.
Error is " 2 Message(s) : Connection to Integration Server lost - Error class com.sap.aii.proxy.framework.core.BaseProxyException: Application exception raised in the R/3 system: GET_OWN_IS_NAME_FAILED . Could not create application fault message: null - "
I'm not able to get the source for it's check, can anyone please advice me wat is the problem and wat can be the solution for the same?
Expecting on ASAP basis....plz.
Thanks
Anand.

Is SLD connection working? You can check it with transaction SLDCHECK on the ABAP side.
Regards,
Sergio

LMS 4.2 Performance Monitor

Similar Messages

Maybe you are looking for