LMS 4.2 - Two notifications for one alarm.

Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
Notification 1
EVENT ID               = 0002BI5
TIME                   = Thu 29-Nov-2012 15:26:32 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Notification 2
EVENT ID               = 0002BI6
TIME                   = Thu 29-Nov-2012 15:26:57 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Any suggestions?

Am I alone with this issue of receiving two notifications for one Unreachable event?

Similar Messages

  • Two prices for one material in sales order according condition type

    Hi,
    I configure the condition type according to following condition record:
    Plant/ Sales Organization/ Distribution channel/ Material / Customer
    (because system should calculate two prices for one material in two plants)
    In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
    It is so difficult for user to update one by one, because there are several sales orders which need to update.
    Is it any way to solve this problem?
    Thanks,

    > In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
    Hi,
    Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
    Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
    It is said prevention is better than cure
    Hope you get some inputs
    regards,
    Sagar

  • Two address for one company code

    Hi SAPians,
    I have a doubt in maintaining company address for Invoice output!
    Is it possible to maintain two Address for one company code?
    Like if XYZ company code and say it has has two customers AB and CD.
    Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
    If yes, please through light on it.
    Regards,
    Romesh

    Hi ,
    As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
    As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
    Hope it helps.
    Thanks and Regards
    Rohit.

  • Fetch New Data shows two entries for one account

    I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
    Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
    One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
    The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
    I tried deleting
    the offending Gmail account, but it did not delete the duplicate entries.
    erasing all settings
    all of my accounts, including iCloud, IMAP, and other accounts.
    The ghost account is still there, fetching calendars and contacts.
    Has anyone else seen this behavior?
    I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

    Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
    So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

  • Two billing for one sales order for same customer

    Dear All ,
    I have a requirement of posting a two billings for one sales order.
    One is for Sales and another is for commission...
    Entry could be
    Sales Entry - Db Customer
                        Cr  Sales
    Commission entry could be
    Db - Cusomter
    Cr- Sales commission income account (P/L)
    We are having third party sales scenario , In this case billing is MIRO dependent.
    Once the miro is done then only billing is possible ...
    Could you please advise on that ..
    Regards,
    Sukh

    Dear Ratish,
    Thanks for yr reply.
    I already did that but it is not serving business purpose.
    Comm payment  - comes diff time than sales payment.
    so ,I will post one entry customer will get hit with total amount Sales + commission
    like below
    Let say 10, 000 is the sales value and 500 is the commission
    So , This entry will get posted
    Customer Db- 10,500
    Sales Cr- 10,000
    Comm Income Cr- 500
    But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
    So, We wont be knowing for which case we have or havnet received the payment against commission.
    As , Customer account is got hit with total amount( Sales+ Comm..value).
    Pls advise how to solve this.
    Regards,
    Sukh

  • Two sids for One instance

    Hi All,
    I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
    Give me the suggestions...
    Cheers,
    Moorthy.GS

    I think you need to define your term 'database' here
    In Oracle world, database is usually referred to as instance.
    a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
    However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

  • Two titles for one screen

    Hi Everyone,
    Is it possible to give two titles for one dialog screen.
    Based on a grid i perform centain things where the user has to enter the values in the dialog screen.
    To this screen i want to title based on the which grid it is. Is it possible to do.
    Can anyone help me on this.
    Thanks,
    Prabs.

    when you define the title bar (to be used with set title bar)
    enter the text with place holders like below.
    & & my &
    later in your program you can supply text for & using set title bar.
    set titlebar 'MYTITLE' with 'This' 'is' 'test' .
    This would produce title bar as
    This is my test
    set titlebar 'MYTITLE' with 'Where' 'is' 'Title' .
    This would produce title bar as
    Where is my Title.
    Hope this is clear.
    Regards
    Raja

  • Multiple email notifications for one task

    Hi Al,,
    I am getting more than one email notifications for one task in less than an hour. Please let me know if any one has ocem across this situation and got the solution.
    your remarks are highly appreciated with points!
    regards,
    theja

    Hi,
    Are you using this RSWUWFML2 program or Extended notification to receive the email notification.
    If Yes Choose 'One Message per Work item'.
    If no, tell me from where you getting the email.
    Regards,
    Surjith

  • How to create two respone for one request

    Hi
    is there any way for us to create two response for one request
    the scenario is as below
    1. user click on update button for particular record in the datatable (
    after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
    2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
    How can we combine 1 and 2 together
    Here what i have tried and didnt work
    1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
    2. i tried to put the generateExcel function in prerender() method
    but the page will only execute the generateExcel function
    - the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
    3 . i tried to put generateExcel Function after it process the data
    public String updateData()
           //update data
           if(success){
                // prompt user to save excell sheet
            return null;
         }This one also doesnt work and gives the same behaviour as number 2
    The Prompt to save excel sheet still gets popped up
    but the page just doesnt get refreshed
    Thanks
    is anybody know the workaround?

    yea i did set some alert message and clear the table by calling
    provider.removeRow and commitChanges
    it just doesnt reflected in the page that we see
    by actually is already removing the row from the provider
    Thanks

  • Two invoices for one sales order

    I want to create two invoices for one sales order
    Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
    I would say 10% of 100 $
    And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
    Both invoices will be relevant of accounting.
    Would any body suggest this, how it would be mapped it in to SAP.

    Hi Suresh,
    It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
    Go to IMG-SD-Billing-Billing plan.   Do ur own configuration for Billing plan.
    Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
    If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
    Hope this wld help U.
    Regards,
    Praveen

  • Can we create two Filters for one cube

    Hi all,
    I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
    I think ,We have to assign only one filter for one user , please i need clarification....
    Thanks
    Edited by: user98631 on 12 mars 2010 05:13

    You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

  • How to stop update notification for one app (iMovie) that I do not want to update

    How to stop update notification for one app (iMovie) that I do not want to update. I do not want iMovie 10 taking up nearly 3 gb on my hard disc. iMovie 9 is just fine and only takes up 1.5 gb. But I get notifications to update and don't know how to turn it off. I've gone into the Purchases tab of the App store and deleted it. I don't want to turn off Update notifications (which is irrelevant in any case because I see no option to do that in Notifications system preference pane). I just don't want to be bugged about iMovie updates. The only option I'm given is to postpone the next reminder until the next morning. -- Franklin

    Interesting; never came across that - here is the window I get (just double clicked on a random doc in the trash):

  • TS1424 Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

    Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

    Check your purchase history. The second charge may be for unlocking someting in the game or might be in-game items.

  • LMS 4.2 email notifications for node down

    I need help configuring an email alert so that when a node (switch, router, etc) is unreachable, i will recieve an email notification.  So far i have tried creating an event set then notification group and then email subscription.  This does not seem to be exactly what i am looking for.  I think this could create alerts for any interface that is unreachable. 
    thanks!                     

    LMS does not works this way unfortunately, and is not able to generate alert/notification for node/device down.
    Fault Management manages doesn't manages device as a whole, instead it manages device on aspects of Environment, System and Interface groups.
    It can mostly analyse a card down when many of the similar ports go down in one, but generally it will will manage device explicitly for above categories, which is further subdivided into :
    Environment : Power Suppoly, Fan and Temp. Sensor
    System : Processor and Memory
    InterfaceStatus: Port, Interface, IP and Card
    The kind of Events if can generate are following and also mentions the situation in which it will be generated:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/Events.html#wp1078033
    -Thanks
    Vinod

  • Can you have two iPods for one computer?

    I know nothing about iPods so please excuse me for this question that probably has an obvious answer. My sister has an iPod nano that she has been using with our computer for a long time. I just bought an iPod and was trying to set it up. So can I use her i tunes to put music on my ipod or how does it work? I am aware you are not supposed to steal music though. So what am I supposed to do?

    Yes, you can use 2 iPod with 1 computer quite easily.
    Using two iPods with One Computer
    JC

Maybe you are looking for