LMS 4.2 User Defined Groups Empty after Daemon restart

Hello
I need some help here.
In order to get topology services to run on a non resolvable DNS server I have followed the instructions in the online help and got Topology Services to start. My issue now is that all my userdefined groups are empty and I can not edit them - it gives me a error message.
Checked the parent groups and these are as supposed - the system groups - subnet groups fx are also populated.
What do you advise?
I have read oither posts and some people were advised to restart crmdmgtd as in this thread:
net stop crmdmgtd
net start crmdmgtd
http://https://supportforums.cisco.com/message/3414498#3414498
Should I just follow the same steps? I can not see find this process in 4.2
Thanks Isaac
PS: These were the steps followed in order to make Topology Services to work.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The Cisco Prime LMS client must be able to resolve the hostname of the Cisco Prime LMS server to server's IP Address, through DNS.
If the Cisco Prime LMS server is not DNS resolvable, Cisco Prime LMS client can access it with the IP address itself, by performing the following steps:
Open the orb.properties file. Solaris or Soft Appliance: NMSROOT/lib/classpath Windows: NMSROOT\lib\classpath where NMSROOT is the directory where you have installed Cisco Prime LMS. Set the property as follows: jacorb.dns.enable=off Go to Admin > Trust Management > Local Server > Certificate Setup.
The Certificate Setup page appears. Enter the IP Address of the Cisco Prime LMS Server in the Hostname textbox. Populate the other columns as explained in the Online help for Administration of Cisco Prime LAN Management Solution 4.2. Click Apply to generate the self-signed certificate. Restart the daemons. See the Online help for Administration of Cisco Prime LAN Management Solution 4.2 for instructions. You will be able to launch Topology Services with the IP address itself.

Hi Michel and thanks for the reply.
The "Physical Location" groups magically started working. I had tried to apply a bunch of device update packages a couple of days ago. I thought they all failed but maybe some of them actually applied. I have no idea but the 2 groups with a rule like this one are now populating:
Device.Hostname startswith "XYZ"
However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
Device.Admin_responsibility equals "XYZ"
Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups. I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked. I always had to go into group admin and manually refresh to get the groups to update. I have tried that several times in 4.1 with no luck.
-Jeff

Similar Messages

LMS 3.2 Common Services User Defined Groups problem

CiscoWorks LMS 3.2 is installed on Windows 2008 64-bit server.
All devices are added into appropriate User defined group in Groups/Common Services.
All groups are fine except that Members of group named Switch-HO-access have been copied also to group named Router-Branch by system for unknown reasons.
At few files we have noticed errors :
" FATAL com.cisco.nm.xms.ogs.server.OGSServer main Exception while OGS Server start up: CTMRegistry::startRegistryServer() : Can't find/start registry server " and
" com.cisco.nm.xms.ogs.util.OGSException: CTMRegistry::startRegistryServer() : Can't find/start registry server ".
What is the reason for copying this devices and is there some other underlying problem?

it seems that the errors you see correlate with regular stopping/starting of the LMS processes (dmgtd) so this would be a normal behaviour.
Can you provide a screenshot of the problem you describe and also the rule for the group Switch-HO-access and Router-Branch

LMS 4.1 No User Defined Groups shown in Fault Notification Groups?

Hi,
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group:
Admin > Network > Notification and Action Settings > Fault Notification Group
Am I missing something?
Thanks for help!

It is not generic, Are you superuser? Any device restictions?
Cheers,
Michel

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

Prime Infrastructure 2.0 Importing user-defined group rules

Dears,
I'm looking for a way to import rules to put devices in a user defined group.
I can see how I can create groups and rules manually, but not how I could export or import those rules.
Is this possible, or on the roadmap?
Cheers,
Michel

In the Cisco Prime Infrastructure 2.0 Deployment Guide under LMS 4.2 Data Migration there is a way to import settings from a "special" backup made from LMS.
This should allow for importing userdefined groups.
Does anyone have tried this yet?
Cheers,
Michel

RME: User defined groups on basis of snmp server-location

Hi,
We have abt 3500 devices in LMS3.2.1, and we want to make user defined groups in RME on the basis of devices configuration of snmp server-location ...
Please advise that it is possible or not?
Thanks

Hi Michel and thanks for the reply.
The "Physical Location" groups magically started working. I had tried to apply a bunch of device update packages a couple of days ago. I thought they all failed but maybe some of them actually applied. I have no idea but the 2 groups with a rule like this one are now populating:
Device.Hostname startswith "XYZ"
However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
Device.Admin_responsibility equals "XYZ"
Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups. I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked. I always had to go into group admin and manually refresh to get the groups to update. I have tried that several times in 4.1 with no luck.
-Jeff

User defined groups authorization

Hi Dear;
is there any possibility to manage the authorization of user defined field or user defined groups in a form?
regards;

Dear Mr Bittar,
Can you check the Expert Empowerment Session:
User unable to modify the UDF form settings
If you go to the following link and write authorisation in the search option the session will appear in the list.
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706503&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

LMS4 - overview about all devices and their user defined groups

Hello,
How is it possible to generate a report to get an overview wheather all devices matches in their intended user defined groups?
For instance this style:
name mgmt-ip user-defined-group-name
Cant find OGS attributes in report generator.
thx for hints, Steffen

Do publish the rules you use to get he devices.
What is the parent group of your devices
Cheers,
Michel

RME User Defined Group

Hello,
i create a group under RME > User Defined Group. (named TEST)
i choosed system.domainname under Rule Expression tab.(net.xxx.com)
and i want when i add a device that has domain name net.xxx.com, it comes in under my TEST group automatically.
p.s : i clicked "membership update" as automatic ....
is not it possible or am i doing it wrong ?

Dynamic groups in RME work nice for me.
You may wish to post the rules you defined to form this group
Also what is the parent of your group?
Cheers,
Michel

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

LMS 4.2 | user-defined tasks

Hi Netpro
i have configured user-defined task called "copy" this templates includes the command copy run start,
then i went to netconfig job based Device,then user-defined tasks choose my template,then i didn't find my task
defined at the Applicable Tasks in order to be added as instance
thanks

Yes, the Nexus 5000 series has a few issues with LMS (and other things). Among them is the non-support of User Tracking. I'm told it's a MIB variable issue but it's been the case for some time now and remains so with the current LMS release.
Here is the reference from the Supported Devices Table which states in part:
The following features are not supported:
User Tracking (Nexus 1K, 4K, 5K and 7K with FEX), VLAN Management, VRF Lite, LANE Management
Configuration Deploy Protocols: HTTPS, SCP, SSH, RCP
Configuration Fetch Protocols: HTTPS, SCP, SSH, RCP
Software Distribution by: Advanced flow, Image, Remote Staging
Software Repository Synchronization
CiscoView - [1.3.6.1.4.1.9.12.3.1.3.840, 1.3.6.1.4.1.9.12.3.1.3.903, 1.3.6.1.4.1.9.12.3.1.3.907, 1.3.6.1.4.1.9.12.3.1.3.930]

Why my user application becomes empty after I installed Lion??

I can see another application file is full of apps but only my user application is empty, I cannot see anything....
I already re-installed a few times and it's same.
Thank you for answering question in advance.

Well first, this forum is for questions about iTunes. So it's not the most appropriate place for questions about OS X Lion.
Anyway, sorry you got bitten by this, but Apple made it quite clear that PowerPC applications would no longer work in Lion. And it's been all over every Mac-related media outlet, covered many times over the months since Lion was officially announced. So it wasn't exactly a secret.
Your choices are to go back to an earlier version of Mac OS X, upgrade to a newer version of Photoshop, or get a copy of Mac OS X Server 10.5 or 10.6 and run it in one of the virtualization solutions (Parallels Desktop, VMWare Fusion, VirtualBox).
Regards.

CM21 user defined field empty

Dear guru ,
I need to add a new field in CM21 for the capacity requirements list.
I have implemented user exit CYPP0005.
I have added this field in structure CYUSER.
I have used FM EXIT_SAPLCYPP02_001 to write the code for populating the field with the value i want.
But if try to execute CM21 the field appears but itu2019s empty.
What I forgot ?
Can you help me ?
Thanks.

closed without solution

Panorama Tab Groups rearranged after FF4 restart, huge hassle, repeatedly reorganized them, opened and let all tabs in group load before restarting, still groups not organized correctly on restart. Help?

I already gave the details.

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

LMS 4.1 - Fault Notification Group

I've populated my LMS v4.1 device database with all our managed devices (192.168.x.x). When I go to 'FAULT NOTIFICATION GROUP' and I must select either the nodes or groups that are associated with this this group, certain nodes are not appearing in the list where I must add them to the group.
As another test, I've created a 'USER DEFINED GROUP' and added all the nodes into it (including the ones I did not see in my prior test). When I add the "UDG" to the 'FNG", most of the are listed int he "Group Subscription Summary" but not all nodes.
I am running LMS v4.1 on Windows 2008.
I suspect it has something to do with the status of the device but I'm still trying to figure it out.
Any assistance would be appreciated.
Thanks,

thanks Joe for your efforts! - and again, you are correct...
resolver.pl LMSserverName
returned 127.0.0.1 as the servers' address - and where did it come from? - the hosts file... There, the hostname and FQDN of the server had entries which pointed to 127.0.0.1 - no clue why this was done. For a test I commented out these entries and at least resolver.pl now returns the correct IP address of the server.
I tried to force a Fault Notification Trap to be sent, but currently no chance; Usually I can do this by just clear a currently active event which gets forwarded, but this time it seems not working. I can mark the event, I get a pop-up to to change the name and make annotations, I even can click on "Yes" to confirm the action -but then nothing happens. - I tried these steps a couple of times the last 45 mins- I think I will wait know until the HighUtil goes a way and drink a wine meanwhile :-)
and I believe cenAlarmServerAddress will be correct now...

LMS 4.2 User Defined Groups Empty after Daemon restart

Similar Messages

Maybe you are looking for