LMS 4.21 -- Unable to schedule NetworkDiscrepancy Report with eMail-Adress given

Hi all,
environment:
LMS 4.21
Solaris 10
trying to schedule a Best Practices Network Discrepancy Report everything works find (reports could be scheduled)
except entering a eMail-Address in Textfield: E-mail.
Hiting the Submit Button results in nothing, no popup stating the created job ID; without any content
in this field a job is able to be scheduled.
Could that be a known bug or is anybody else facing the same problem?
Best Regards
Lothar

No Cisco-Expert available having a solution?
Many thx

Similar Messages

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
        IInfoObjects results = null;
        ISchedulingInfo schedulingInfo = null;
        try {
           results = iStore.query(query);
        } catch( SDKException sdke ){
           logger.error(sdke);
        if( !results.isEmpty() ){
            // get the actual report object from collection and set scheduling information
            IInfoObject report = (IInfoObject)results.get(0);
            schedulingInfo = report.getSchedulingInfo();
            schedulingInfo.setType(CeScheduleType.ONCE);
            schedulingInfo.setRightNow(true);
            schedulingInfo.setRetriesAllowed(3);
            try {
                Set<String> keys = destinations.keySet();
                Iterator i = keys.iterator();
                while( i.hasNext() ){
                    String dest = (String) i.next();
                    if(dest.equals(CrystalDestinations.EMAIL)){
                        // get the destination object and set it to SMTP plugin
                        List emailAddress = destinations.get(CrystalDestinations.EMAIL);
                        IDestination destinationObject = schedulingInfo.getDestination();
                        destinationObject.setName("CrystalEnterprise.SMTP");
                        IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
                        ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
                        smtpOptions.setDomainName( emailDomain );
                        smtpOptions.setServerName( smtpHost );
                        smtpOptions.setSMTPUserName( smtpUser );
                        smtpOptions.setSMTPPassword( smtpPass );
                        smtpOptions.setSubject( "Email for report " + report.getTitle() );
                        smtpOptions.setMessage( "This is the message body" );
                        smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
                        smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
                        for(int j = 0; j < emailAddress.size(); j++ ){
                            smtpOptions.getToAddresses().add( emailAddress.get(j) );
                        destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
                        List printers = destinations.get( CrystalDestinations.PRINT );
                        IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
                        printerOptions.setCopies(1);
                        printerOptions.setEnabled(false);
                        printerOptions.setPrinterName( (String)printers.get(0) );
                        printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
                List reportPrompts = ((IReport)report).getReportParameters();
                for(int j = 0; j < reportPrompts.size(); j++){
                    IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
                    if(prompt.getParameterName().equals(mdrParamName)){
                      IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                      v.setValue(reportParameters.get(mdrParamName));
                    } else if(prompt.getParameterName().equals(addressParamName)){
                        IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                        v.setValue(reportParameters.get(addressParamName));
                IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
                format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
                iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

Unable to schedule webi report with Test user

Hi All,
I get the below error when i try to schedule a WEBI report with user id.
I can schedule with my developer id.
Error Message: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'sudes_errors' (ID: 45941). Please contact your administrator if you require this right.
Any inputs greatly appreciated.
Thanks

Error clearly showing that, Test user need access rights defined @ CMC.
Contact BO admin, to assign Schedule/Full control rights for that Test user.
Thank You!!
H2H

Unable to Schedule the Report with a user with Author Role.

Hi,
I tried to Schedule the Report using weblogic user(which has admin role) it worked perfectly. But when i try to login using User(which has author role) and when i try to schedule a report i am getting the following error. It is clustered Environment.
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID:/users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 6 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
Exceeded number of request retries for method GetResponseContent.
Can any one help me with this.
Thanks
Rondo.
Edited by: RONDO on Dec 12, 2012 4:07 PM

Check the Doc ID 1446877.1
As per this doc Fix to apply patch 13553428:
The fix to this issue is to apply patch for the following unpublished bug.
Bug 13553428 - QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
Patch 13553428: QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
The patch is available on MOS and can be applied to all platforms.
Or access via this link:
https://updates.oracle.com/Orion/Services/download/p13553428_111160_Generic.zip?aru=14732325&patch_file=p13553428_111160_Generic.zip
Please refer to the Readme. It is important to Stop the System before applying the patch. Then restart.
During restart Weblogic should automatically detect that bimiddleware.ear has changed in the OH and automatically redeploy the application
If helps pls mark as correct
Edited by: Srini VEERAVALLI on Dec 12, 2012 7:39 PM

Problem scheduling webi reports with XI3.1 pending forever

Hello,
I've got a problem scheduling webi reports with XI3.1 scheduler.
After confiming scheduling job (loggin in with "administrator" user), status remains "pending" forever(using Infoview or CMC).
I tried different job recurrence a modalities (attachment formats, destination user etc).
I also try to add (-javaArgs "Xmx900m,Xincgc,server") wich is the SAP solution found on its portal but it does not work.
I use BO XI 3.1 in Windows 2003 server, after the install I reduced the maximum memory of Java in the tomcat 5.5.2 server from 1024 to 512 because the server never started with the initial size.
Please I need Help.
thanks in advance,
Samy

Hi,
Below SAP solution found found in BOB Forum.
I applied this solution and now everything works fine !!
I just add this -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Hope this helps:
Symptom
Scheduled WebIntelligence reports remain stuck in 'pending' status after installing Microsoft windows patches of April 2009. Restarting the Adaptive Job Server, Central Management Server or Server Intelligence Agent has no effect.
The Event Viewer logs show the following entry: Unable to start the sub-process (Job Server Child). Cause : Couldn't get IJob interface or writing IAudit: Pipe exception. Reason: jobserverchild (WebIJavaSchedulingService ReplicationSchedulingService, 0, Timeout waiting for Child [4716] to register ([120]seconds).
Reproducing the Issue
Install Business Objects Enterprise XI 3.x on a French Windows 2003 SP2 32bits server
Install the following Microsoft windows update patches of April 2009:
KB923561, KB925336, KB952004, KB956572, KB959426, KB960225, KB960803, KB961373, KB967715
Schedule a WebIntelligence report
The report remains in Pending status
Business Objects Enterprise XI 3.1
Windows 2003 SP2 32bit (French)
Microsoft windows patches of April 2009
Cause
With Microsoft windows patches of April 2009, the maximum Heap Size for java processes has been reduced to under 1000MB.
Resolution
Apply the following steps to fix the issue:
Launch the Central Management Console
Select Servers
Right click on <server_name>.Adaptive Job Server and select Properties
Add the switch -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Click on Save and Close
Restart the <server_name>.Adaptive Job Server
Regards .
Sam.
Edited by: samouber on Aug 21, 2009 2:54 PM

Unable to integrate Oracle Reports with Express--(To oracle Team also)

Hi
Unable to integrate Oracle Reports with Express. While defining
the Express database connection using the olap connection editor
iam getting the following error "Error locating the XCONEDIT.INI
file. Try re-installing the software".
what should be done?
Atleat,If anybody has successfully connected to Express via
Reports6i. Kindly give the details like what softwares to be
installed in what HOME? and also other steps involved in the
process.
YOur help !!!
kindly respond...(Oracle Team do respond with something)
with rgds

hello,
check out the notes
Note:112542.1
Note:167049.1
on oracle metalink for further information.
if you still have issues, please contact oracle support services
for furhter assistence.
regards,
the oracle reports team --pw

HOW to schedule a report with Bi Pulisher

Hi,
im trying to schedule a report with bip , the report already exist and it' s OK, but when i schedule it and enter the nessary input data, no output is displayed, what can I do to generate a weekly report in local folder, i don't want to add dilevery destination??
thanks for your help

is there anyone can help me?

Conditional Scheduling of report with Prompt values

Hi All,
My requirement is that I select some values in the dashboard prompt and get the report. Is there any methodlogy to schedule that report with having data in report according to
set prompt values on the fly that is dynamically.
We can a link below the report to schedule it but how can we pass the condition parameters? Please help.

Hi Kishore,
Thanks very much for the reply. It answers one part of the question.
I am thinking to put a text property or button below the report and is it possible to attach the report values with current prompt selection and the request is attached to the in delivery content section which means user need not pick up the delivery content only he has to schedule current report only by clicking the link or button? Can I have script for that.
To make it simple If I am the user I would like to see following:
1. I go to dashboard page and select the prompt and get the report result.
2. I have link or button below to schedule.
3. I press the button I go to delivers section.
4. I have current report attached to the delivery content with default selection or current selection.
5. I modify other parameters and schedule.
Please help me.

Schedule a job with email destination in BOXI R2 with email format as html

Hello Guys, would it to possible to schedule a job with email destination in BOXI R2 with email format as html? we are able to get it running with plain text email format. we use Java SDK to interface with BO Enterprise servers.
thanks for your thoughts,
Venkat

Hi
your job should SMOF_DOWNLOAD can bring new material master if you set up correctly.
as a smart method smof_download is the best way.
doble check your filter condition. it should work as you expected. because we dont involve in manual pulling...
check your variant once again. in vari table,
can you check r3ac1 - filter settings- source seetingsa--> source site nmae --> backendlogical system and filter sync..
br
Muthu

Unable to run a report with chart

I have report rel.6 NT version installed on Windows 2000.Now I want to run my report with a chart.But after I finished the chart
wizard and try to run it,it gives me error.The error says that it is unable to create a PL/SQL Development Environment context.I also try it on Report Runtime
and it gives me error "REP-0074:Failure to run another product using SSL".Anybody out there can help me.Is it because of my operating system or ????

Charlie:
I think we might be dealing with a bug: I have the same problem. I'm stumpted as well. Let me know if you make any headway. I think it might be best to call Oracle tech support.
Paul

Scheduling WEBI reports with API

Is it possible to schedule a WEBI report with an external API?
Explanation: our customers can view their data on our internet site. We want to show a list of reports where they can subscribe. For example: report X with parameter Y each monday morning in Excel format to mailadress Z.
This subscribtion is stored in our Oracle database. The database sends an API to the BO enterprise server. BO schedules and sends the report to the customer.
Regards,
Emiel

Hi
What is the API ? Is it a Text file ? if so then you can schedule the reports based on an event in BO .
Regards
Prashant

How to schedule a report with dynamic parameters

We need to schedule a Webi report with dynamic parameters then email the different result to different email groups. Is it possible to do this in scheduler? Please advise. Thanks.

there are 2 schedulers
1st CMS
the reports which does not have any input parameters, only then t can be scheduled in CMS
2nd in Infoview
if report has input parameters and if you want to schedule it, then you may need to schedule the report from Infoview
To have a email notification
configure the SMTP server in report JOB Server
Thanks,
Ganesh

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

Scheduling a report with System Date as prompt

Hi Experts,
We have came across a requirement where users want to have a date prompt.
While scheduling the report, by default prompt is to be populated with system date and it (prompt) should also allow us to select a different date.
This report is used for regular run and also for scheduling.
We need a single report with single prompt which allows us to run for any random date when prompted and also to be scheduled for the latest date.
Please give us advice/ suggestion.
Thanks
Uttam

Hi Neil,
We have tried both the approaches given by you, but it is not working for my requirement.
Let me explain it with the below scenario.
scenario:
we have developed the report by using 2 data providers,
Dp1: It is a custom Query with date as follows ( it is a Transaction data) which brings the data from 1st day of month(user prompt) to user's prompt date.
TRANSACTION_DATE BETWEEN last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\Transaction Date',Mono,Free,Persistent,,User:0)
Dp2: It is also Custom Query, but it has only data on month ends.
DIMV_plant_EOP.TRANS_END_OF_MONTH_DATE = last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\EOP plant Attributes\EOP Date',Mono,Free,Persistent,,User:0),-1))
Report is having 3 prompts, namely
1) As of date (prompt)
2) Plant (prompt)
3) Country (Prompt)
For example: if my report is ran on 06-june-2014,
DP1: Brings the data from 1st of June to 6th of june.
DP2: Brings the Data from Inception to last month(say 30-may-2014) because it has only month end data.
Upto this it is fine.... but
My requirement is to schedule the report daily......
Example: User want to schedule a report today(10-July-2014), tomorrow(11-July-2014) and so on...
Scheduling should be done daily i.e, it has to fetch the data 10-Jul-2014, 11-july-2014,12-july-2014.... so on.
Automatically scheduling has to take the current date.
Thanks,..

Schedule a report with parameter

Hope this isn't a silly question - I'm very much a new boy to Business Objects.
I have a report that the user wants to have run weekly. However, the report prints weekly data forecasts for the current week and for a number of weeks to come - probably 12. The only way I've found to limit the query is using an actual date prompt when running the report to restrict the query range.
I could probably schedule individual occurences, but this would be quite an overhead. Is there a way to schedule the report and pass in a parameter of (today + 12 weeks) or something similar?
TIA
Malcolm

There are a couple of approaches that you can take, but both require some assistance from your universe designer. For the first approach, your universe designer can create date-based objects like "today" or "start of this week". These objects would be based on database functions (like sysdate for Oracle or getdate() for SQL Server) that return the date of "today" and perform other operations on that value to turn it into various date ranges. You can then make conditions on these objects.
Another approach is to create what I (and others) call a "Magic date" which is used in prompts. When the report is run interactively you can enter any date you want. When the report is scheduled, the "magic date" value is entered instead. By using this technique you can have one report that runs both interactively and in batch. The magic date is converted to today's date when the report is run, so as each week expires and a new week starts the report will run for that new week automatically. Yet the report can still be run interactively by entering any other date.
I have a number of blog posts on [dynamic date objects|http://www.dagira.com/category/design/dynamic-dates/] as well as the [magic date process|http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/] that can provide more material for you (or your universe developer) to read.

LMS 4.21 -- Unable to schedule NetworkDiscrepancy Report with eMail-Adress given

Similar Messages

Maybe you are looking for