LMS 4 Template Center issues
For years we have used baseline templates to deploy basic configurations to LAN switches as part of the staging process. Since the baseline templates were developed more as a compliance check mechanism, I thought I would try to move this function over to the template center. So I opened the LMS Configuration Management manual and read the Managing and Deploying Templates chapter, along with Appendix B - Config Template XML schema. This left a lot unanswered, but I thought I would give creating a template a shot anyway.
So I exported one of the system defined templates and went about hacking it up to suit my needs. The first thing I discovered was that when I tried to import my modified template and there was a problem with it the only feedback I got was a message stating Template import Failed. Unable to parse the XML file.Please ensure that the XML file is complaint to the schema. Um... ok... that narrows it down. Undaunted, I chopped most of the XML out until I got the thing to import successfully. Then I slowly added the rest of the parameters in, one at a time and fixing any problems along the way.
I finally reached the point where I was ready to test a deploy. With great anticipation I clicked on Deploy, selected my test device, filled out the form and clicked Next.
Some fields might contain invalid characters, or required fields could have been left blank
What now? None of the fields are flagged in the browser. Is there any way to determine what it is that is missing without resorting back to chopping up the template and trying portions of it until I find it? Am I going about this the wrong way? Am I misinterpreting the purpose of template center all together?
-Frustrated
Where did you start? It looks like you've followed an invalid installation method. The soft appliance (.ova-based LMS 4.2 image) runs over the built-in ADE-OS (custom Linux variant from Cisco).
I'd advise recreating the VM, carefully following the steps in here.
Similar Messages
-
LMS 4.2 Template Center parameter file
Is it possible to run templates from Template Center against a parameter file instead of interactive setting the variables analogue to compliance base line templates?
If yes where can I find a documentation, how to deploy template center templates with parameter file?
Thx in advance, SteffenThx, Marvin for the reply and the attached whitepaper.
I know that compliance baseline templates are able to support a parameter file.
But I asked for parameter file based by means unattended, none interactive rollout for the templates in the Template center. Its intended to build up a network from the scratch so everything will be none compliant anyway, so in my opinion Template center XML (the only configuration method that was taken over in PI) will be the better choise to rollout all the variable driven per device individual config parts.
Steffen -
LMS 4.1 - No Template Center Job Approval?
Hi,
I cannot find an option to enable Job Approval for Template Center Tasks.
Is this not possible for Template Center?No, Template Center approval has not yet been implemented. There is a bug open for this, CSCtl21503.
-
How to setup a template to issue SHA1 certs if I have a SHA256 chain
Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet SinghCertificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Hi,
I have LMS 4.2 and switches 3560X, 3750X running IOS 15.0(1)SE3. I have enabled Energywise on them but the Energywise Dashboard is not showing some endhosts.
When I enter to the switches and enter "sh energywise children" the endhosts are displayed, but on the Energywise Dashboard (Configure Energywise Attributes on Endpoints) it apperas as if the switch has no endhosts connected.
I have erased and added the switches, verified the SNMP, SSH connection and check that cdp is enabled. On the Device Center, the IP Phones are shown as simple Endhosts and it is not possible to troubleshoot them through ping or traceroute. I'm not sure if it is a problem of the Energywise Work Center or the General LMS.
Thanks for any help on this.Hi,
I got exact the same problem with LMS 4.2.3.
I can see ip phone when issue command "show energywise children".
and I have added CUCM just like document describe.
Then I manually trigger data collection and can see ip phone in report.
But I can't see any endpoint on energywise page.
Does any one know how to do? -
Game Center issue with Apple ID
My son suddenly cannot log in to Game Center. When he tries it tell him: "This Apple ID has not yet been used in Game Center. Tap Continue to set up your account." He has been using his Apple ID and Game Center account since Christmas 2011. He didn't log out but one of his games asked him if he wanted to log in and he tried and this happened, almost like his log in time expired
We tried different games, same thing happens.
We have tried turning it off and turning it back on.
He doesn't want to lose all of the things he has on Game Center so creating a new account isn't an option. I searched for answers and have come across several people having similiar issues since 2010 but there hasn't been a single answer from anyone.
If anyone has any ideas or experience with this and could help I would GREATLY appreciate it,
Thank you for you time!Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time. -
Cost Center assign Profit Center Issues
Hi Controlling Expert,
i have one issues regarding, Cost Center assign to Profit Center
wht happened , we have made MIS Report Thru Report Painter KE80, we have map based on Primary Cost Element, at the time of Business Transaction, we have capture the Finance Cost center i.e FI000, Marketing Cost center i.e MK000 , HR Cost Center i,e HR000 and assign the same cost center FI000 to Profit Center i.e FI000 also same name, respectively. in MIS report there is two Head i.e Sustaining Cost and Development Cost ,where we have to capture only Cost center for Sustaining Cost related to display i.e FI000, MK000 and HR000. KE80 report belongs to Profit Center wise you can see the Report. But same FI000, MK000 and HR000 also updated related with business transaction and capture above cost center like in depreciation GL Amount 1000 cost center FI000 and sustaining cost also updated the same amount 1000 because we have assign FI000, i.e wrong . last 3 months post the amount now wht should I do for not updated sustaining cost, as I understand , should be delete sustaining Cost as well Development, and later on we can take report from KSB1 for FI000, MK000 and HR000, for management purpose, so if I cannot assign profit center FI000 to Cost Center .kindly correct me whether ryt or wrong. Coz Fianance, HR cost and marketing is only cost center. not suppose to assigh profit center, in this case how Profit Center removed from Cost center. kindly let me knw, or give me other option.
wen we see the report same Profit Center showing two times along with amount i.e wrong coz of Sustaining Cost we have assign Profit Center
in this report particulars are Below
Revenue : Relevant GL ( At time of Business Transaction we have captured the Relevant Profit Center i.e Finished Product i.e R100: RA Tube
and RA Tube R100 assign with same Cost Center R100.
B.Material Cost : Relevant Primary Cost Element
Manpower : same like Above
2.Energy : same like Above
3.Consumption : same Like Above
Conversion Cost (1+2+3)
Sustaining Cost : Here we have given Profit Center i.e FI000, MK000 and HR000 these profit center assign
Development Cost : Here we have given profit Cente EN000
Profit (A-B-C-D-E-F)
G.Depreciation : Relevant Primary Primary Cost Element
Financing Cost : Relevant Primary Cost Element
I. Other Income/Loss : Relevant Primary Cost Element
PBT : (F-G-H-I)
Kind regards
Pranav Kr. Gupta
SAP FICO Consultant.Hi Pranav
You are logging same issue twice. I didnt see any difference in the two threads though.
If its the same issue, request you not to repeat this in future.
KE80 report two times value effected
Regards
Mustafa -
Profit Center issue when executing GR55
Hi Experts,
I was reported by the business users that they see transactions with the Dummy Profit Centers when they run report for Balance Sheet and P&L Statements. They dont want to see any Dummy Profit Center Report Transactions in their financial statementsin both BSand P&LStatements.
For example a number of Documents posted against same G/L account and few of them have dummy profit centers, users doesn't want to see them.
I already checked in tables BSAD,BSID, BSIS,BSAD, BKPF,BSEG
TCodes: FAGL3KEH (No default profit centers allocated to anyone of the company codes), FBL3N, FBL5N, VF03
So we know that there is issue but I need to know the process to find it.
Can anyone help me out the procedure to find out the issue. This is very high priority issue.
Thanks,
Andy RogerRefer to the IMG Activity Documentation for the following IMG Node.
Financial Accounting (New) -> General Ledger Accounting (New) -> Master Data -> Profit Center -> Create Dummy Profit Center
Here is the documentation:
Create Dummy Profit Center
This function lets you create the dummy profit center for the current controlling area.
The dummy profit center is updated in data transfers whenever the object to which the data was originally posted (cost center, order, and so on) is not assigned to a profit center. This ensures that the data in Profit Center Accounting is complete. You can later send the data on the dummy profit center to the other profit centers using assessment or distribution.
You create the master record for the dummy profit center using this special transaction. To change or display it, use the normal profit center maintenance functions.
The name of the dummy profit center is displayed in the controlling area settings for Profit Center Accounting.
Prerequisites
The standard hierarchy must exist for the current controlling area.
Actions
Enter the name of the dummy profit center. The rest of the steps are the same as when you create a normal profit center.
Choose the function Extras -> Set controlling area first to make sure that the correct controlling area is set.
I am guessing this is where your dummy profit center postings are coming from (a cost center / order or some other account assignment object that is not assigned to a profit center). It should be mandatory (in your month-end close) to run reports on dummy profit center(s) and move balances, if any, to the real profit center, before you pull financial statements. -
Sync Center Issue in Windows 8.1
I purchased a Sony Vaio Laptop Model SVT11125CNS with Windows 8 64 Bit Single User Pre-installed. Subsequently, I upgraded to Windows 8.1 with Freee Upgrade. Te con figuration of my Laptop is: Processor-Intel(R) Core (TM) i5-3317U CPU @ 1.7 GHz; RAM-4 GB
(3.88 GB Usable), System Type-64-bit operating system x64-based processor.
I have an office Network System and the file server OS is Server 2003. My Network s WORKGROUP Based. I log on to my Office Network through Wireless.
Earlier, I had been using another lap top with Windows 7 OS in th same networking environment. I was able to use the Sync Centre to create Sync partnership with the files and folders in the server for offline
working.
Now, even though I am able to see the Sync Center, I am unable to create any Sync partnership with my Server with Server 2003 OS and I am unable to make the files and folders in the server available for Offline
working.
Please provide me a solution.Hi Krishnakumar R Sennar,
We wonder which version of Windows 8.1 you are running.
To the best of my knowledge, Sync Center does require Windows Client to be at the Professional level edition or higher in Windows 7 and Vista.
Unfortunately we have no standard edition license for test due to limitation of our test environment. However, your issue is exactly same with Windows 7 Home Premium so I am supposing it would be root cause if you are running Windows 8.1 standard edition.
If you are running Windows 8.1 standard, we suggest you do some simple test to check if it works with share folder on another computer before you purchasing the Windows 8.1 Pro Pack.
If it works on on other share folder or you are running Windows 8.1 PRO, please let me know and we will provide further support.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Live text template render issue when using Media Encoder?
I'm running into flash frames with Media Encoder exports of Premiere sequences using the live text templates.
Unfortunately, AME doesn't flag it as an error, so the render completes without any issues in the render log and the only way to find it is to watch the rendered file.
I have tried different combinations of having After Effects open or closed, with the live text template comp open or closed; I can't consistently reproduce the problem with any certainty and so am having trouble pinpointing the source.
My only hypotheses so far are that:
The glitches seem to be happening in the dynamic link between AME and PP, not AE and PP. The live text will pop back to the duplicated comp's text for one frame. Video playing simultaneously doesn't pop.
In other words, the AE text template said: "name here". In PP it was edited to say "John Doe", then that comp was duplicated and edited to say "Bob Smith". Everything looks fine in PP. There are no keys on the source text in AE (I have noticed that if there are keys on the source text in AE, the text will pop back to the original AE text at that key in PP).
When rendered out of AME, halfway through Bob Smith's title, it will read "John Doe" for a single frame, then pop back to being Bob.
I've only had this happen so far with AME renders. The renders out of PP haven't given me any issues so far.
It might happen more frequently on longer segments? If a title is up for 45 sec instead of 10 sec, it may be more likely to pop.
The issue seems to occur more often in batch renders out of AME (happened to 3 of 5 files rendered in a batch, AME 2014.1) and/or with unrelated AE comps open (on a single render from AME 2014.2)
Again, it doesn't happen every time or to the same title, or in the same spot. Files are being rendered to ProRes 422 HQ. Unchecked "Use Previews" in AME.
Would be nice to get to the bottom of what's happening so I can recommend something to the editors when I hand off these live text templates to them.
I realize that the live text is a new feature as of 2014.1, but haven't found anyone else talking about this. Would love if this was a very simple fix that I'm missing.
I was able to reproduce the error on 2 different machines, with similar specs:
Premiere CC 2014.1 and 2014.2
Media Encoder CC 2014.1 and 2014.2
Mac tower 2010
2x 6-core Intel Xeon
RAM: 64 GB
Graphics: ATI Radeon HD 5770 and NVidia Quadro K5000 (or K4000)
OS: 10.8.5 Mountain LionI'm running into flash frames with Media Encoder exports of Premiere sequences using the live text templates.
Unfortunately, AME doesn't flag it as an error, so the render completes without any issues in the render log and the only way to find it is to watch the rendered file.
I have tried different combinations of having After Effects open or closed, with the live text template comp open or closed; I can't consistently reproduce the problem with any certainty and so am having trouble pinpointing the source.
My only hypotheses so far are that:
The glitches seem to be happening in the dynamic link between AME and PP, not AE and PP. The live text will pop back to the duplicated comp's text for one frame. Video playing simultaneously doesn't pop.
In other words, the AE text template said: "name here". In PP it was edited to say "John Doe", then that comp was duplicated and edited to say "Bob Smith". Everything looks fine in PP. There are no keys on the source text in AE (I have noticed that if there are keys on the source text in AE, the text will pop back to the original AE text at that key in PP).
When rendered out of AME, halfway through Bob Smith's title, it will read "John Doe" for a single frame, then pop back to being Bob.
I've only had this happen so far with AME renders. The renders out of PP haven't given me any issues so far.
It might happen more frequently on longer segments? If a title is up for 45 sec instead of 10 sec, it may be more likely to pop.
The issue seems to occur more often in batch renders out of AME (happened to 3 of 5 files rendered in a batch, AME 2014.1) and/or with unrelated AE comps open (on a single render from AME 2014.2)
Again, it doesn't happen every time or to the same title, or in the same spot. Files are being rendered to ProRes 422 HQ. Unchecked "Use Previews" in AME.
Would be nice to get to the bottom of what's happening so I can recommend something to the editors when I hand off these live text templates to them.
I realize that the live text is a new feature as of 2014.1, but haven't found anyone else talking about this. Would love if this was a very simple fix that I'm missing.
I was able to reproduce the error on 2 different machines, with similar specs:
Premiere CC 2014.1 and 2014.2
Media Encoder CC 2014.1 and 2014.2
Mac tower 2010
2x 6-core Intel Xeon
RAM: 64 GB
Graphics: ATI Radeon HD 5770 and NVidia Quadro K5000 (or K4000)
OS: 10.8.5 Mountain Lion -
Hi
one of our billing documnet has got cash pricing procedure assigned to it. Accordingly, when a billing document is created, certain G/L is getting debited instead of customer account. We are also crediting same G/L account thru VKOA settings. e.g.
Debit G/L 300000 $100
Credit G/L 300000 $100
G/L 300000 is created as a revenue cost element in CO.
Now the issue is,
Does revenue cost element requires assignment to CO object ? DO we need to give cost center in default settings ? If not then, I am getting error - G/L 300000 requires assignment in CO
If I give cost center in OKB9, only the first line item is getting cost center thereby not matching in Cost center accounting. How to get cost center in second line item. IN this case, profit center for these tw line items will also be different. First line item will get from default of the cost center in OKB9 and the second one gets from sales order.
If no cost center is required, then also, first line item does not get profit center assigned to it. On the other hand , second line item gets the same from sales order.
Can anyone help me in this regard ? Either both line items should get same cost center ? PC or if no cost center at all, then, same profit center in both line items
Regards
RajHi
It dosen't help.
My question is if the same G/L is getting profit center in the second line item, then why cant in the first line item also ?
First line item is determined by cash pricing procedure. Second line item is determined by condition type in regular pricing procedure. SAme G/L is deterimined in both of these line items.
If I maintain defauld cost center for this G/L in OKB9, first line item takes that wih default profit center of that cost center. However second line item does notget any cost center but gets profit center from sales order
What I want is either it should take cost center as first line item or both line items shiould take profict center from sales order
Help
Raj -
BI - Portal Template Installer Issue
Hi all,
Guess it's appropriate forum for this question regarding BI to portal connectivity. I've tried Template Installer from SAP Note 983156 but in it's first step "create RFC destination in abap" fails with following error message:
1 Create Destination in ABAP Import not successful
Element'SAPConfigLib.BIW.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BIW.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
There are few threads on this issue but fail to resolve the issue here. If some came across this issue I'll be pleased if a solution can be shared here.
Regards.Issue resolved,
Template installer runs on specific SP levels on BI.
Check SAP notes for this.
Rgds. -
Missing template/layout issues post-content migration
We are attempting a migration of data and content from 6.3 to 6.2 (for SAP EL integration) and we are seeing two issues. About 1/3 of the meetings display a node with the message: "The template you are looking at is the one we use if the default template feature is not working", another 1/3 show a blank meeting board and have no available layouts, and the remaining 1/3 work fine.
We are still trying to determine if this might be a versioning issue by examining creation/mod dates of the meetings and underlying templates but have yet to find a discernable pattern. Note, all meetings function without issue in the 6.3 system.
My next stop is hunting for DB discrepencies...
Any help appreciated,
LeeDoes anyone know where/how the file system path to content is configured? I have looked through the DB and App file dir with no luck. The (target) lab system I am using was installed with a non-default path (D:/AdobeConnect/breeze...) and the (source) migrated content came from a system with a default path (D:/breeze...). When attempting to access the content library, the object display window just times out. I have verified the content does exist in file system and is uncorrupted.
Any help appreciated,
Lee -
ADF migration from 11.1.1.1.0 to 11.1.1.2.0 : template management issue
Hello,
I'm trying to migrate my applications from ADF 11.1.1.1 to ADF 11.1.1.2. One of these apps is based on a page template, and doesn't work anymore.
Here's one of the jspx (I removed all unnecessary elements). The page is a simple table based on a ViewObject. The bottom facet displays a "Comments" tag, which is linked to the "Comments" field of the selected row
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:afh="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view locale="#{localeManager.userLocale}">
<f:loadBundle basename="Locale.messageBundle" var="bundle"/>
<af:document id="d1" title="#{sessionScope.contextTitle} : your mobile time registration system"
uncommittedDataWarning="on">
<af:messages id="m1"/>
<af:form id="f1">
*<af:pageTemplate viewId="/MTRSTemplate.jspx" id="pt1" value="#{bindings.pageTemplateBinding}">*
<f:facet name="header">
</f:facet>
<f:facet name="main">
<af:panelStretchLayout id="psl2" inlineStyle="margin:10px;"
bottomHeight="0">
<f:facet name="center">
<af:table value="#{bindings.PersonReport.collectionModel}"
var="row" width="100%"
rows="#{bindings.PersonReportIterator.rangeSize}"
emptyText="#{bindings.PersonReport.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.PersonReportIterator.rangeSize}"
rowBandingInterval="1"
filterModel="#{bindings.PersonReportIterator.queryDescriptor}"
queryListener="#{bindings.PersonReportIterator.processQuery}"
selectedRowKeys="#{bindings.PersonReport.collectionModel.selectedRow}"
selectionListener="#{bindings.PersonReport.collectionModel.makeCurrent}"
filterVisible="true" varStatus="vs"
rowSelection="single" id="tbl1"
verticalGridVisible="true"
horizontalGridVisible="false"
binding="#{dataManagerBean.activityCollectionModel}">
<af:column id="persDet" headerClass="HeaderGroup"
headerText="#{bundle.daily_CPerson}">
<af:column align="center"
headerText=" "
headerClass="tableHeader"
styleClass="columnData" id="column1" width="20">
<af:image id="flag" source="images/flags/flag_#{row.AdminStatusFlagColor}.png" rendered="#{row.AdminStatusFlagColor != null ? true : false}"
shortDesc="#{row.AdminStatusFlagColor}"/>
</af:column>
<af:column sortProperty="PersonCompanyNr"
sortable="true" align="center"
headerText="#{bundle.daily_CPCompanyNr}"
headerClass="tableHeader"
styleClass="columnData" id="c7" width="45">
<af:outputText value="#{row.PersonCompanyNr}" id="ot3"/>
</af:column>
<af:column sortProperty="PersonLastName" sortable="true"
styleClass="columnDataExtended"
headerText="#{bundle.daily_CPName}"
headerClass="tableHeader" id="c6"
width="120" align="left">
<af:outputText value="#{row.PersonLastName} #{row.PersonFirstName}" inlineStyle="margin-left:2px;"
id="ot8" shortDesc="Person details : Tel: #{row.PersonMobile} Mail: #{row.PersonMobile} Address: #{row.PersonStreetNr}, #{row.PersonStreet} #{row.PersonPostCode}, #{row.PersonLocation}"/>
</af:column>
</af:column>
<af:column id="noDet" headerClass="HeaderGroup">
<f:facet name="header">
<af:outputText id="notext" value=""/>
</f:facet>
<af:column sortProperty="DateDay" sortable="true"
align="center" headerText="#{bundle.daily_CDate}"
headerClass="tableHeader"
styleClass="columnData" id="c13" width="60">
<af:outputText value="#{row.DateDay}"
id="ot4">
<af:convertDateTime pattern="#{bindings.PersonReport.hints.DateDay.format}"/>
</af:outputText>
</af:column>
</af:column>
<af:column id="planDet" headerClass="HeaderGroup"
width="330">
<f:facet name="header">
<af:outputText id="plan" value="#{bundle.daily_CPlan}"/>
</f:facet>
<af:column width="180" align="left"
headerText="#{bundle.daily_CCustCost}"
headerClass="tableHeader"
styleClass="columnData" id="c8"
>
<af:outputText value="#{row.PlanCustomerCompanyNr} #{row.PlanCustomerName} - #{row.PlanCostCenterCompanyNr} #{row.PlanCostCenterName}"
id="outputText1" inlineStyle="margin-left:2px;" shortDesc="Contact Details : #{row.PlanContactCompanyNr} #{row.PlanContactLastName} #{row.PlanContactFirstName} Tel: #{row.PlanContactMobile} Mail: #{row.PlanContactEmail}"/>
</af:column>
<af:column sortProperty="PlanStartTime"
sortable="true" align="center" width="40"
headerText="#{bundle.daily_CStart}" headerClass="tableHeader"
styleClass="columnData" id="c9"
>
<af:outputText value="#{row.PlanStartTime}"
id="ot10">
<af:convertDateTime pattern="#{bindings.PersonReport.hints.PlanStartTime.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="PlanStopTime"
sortable="true" align="center" width="40"
headerText="#{bundle.daily_CStop}"
headerClass="tableHeader"
styleClass="columnDataExtended" id="c14"
>
<af:outputText value="#{row.PlanStopTime}"
id="ot12">
<af:convertDateTime pattern="#{bindings.PersonReport.hints.PlanStopTime.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="PlanDuration"
sortable="true" align="center" width="40"
headerText="#{bundle.daily_CDuration}" headerClass="tableHeader" id="c10"
styleClass="columnData"
>
<af:outputText value="#{row.PlanDuration}"
id="outputText4"/>
</af:column>
</af:column>
<af:column id="repDet" headerClass="HeaderGroup">
<f:facet name="header">
<af:outputText id="rep" value="#{bundle.daily_CReport}"/>
</f:facet>
<af:column align="left"
headerText="#{bundle.daily_CCustCost}"
headerClass="tableHeader"
styleClass="columnData" id="c5" width="180"
>
<af:outputText value="#{row.ReportCustomerCompanyNr} #{row.ReportCustomerName} - #{row.ReportCostCenterCompanyNr} #{row.ReportCostCenterName}"
id="ot9" inlineStyle="margin-left:2px;" shortDesc="Contact Details : #{row.ReportContactCompanyNr} #{row.ReportContactLastName} #{row.ReportContactFirstName} Tel: #{row.ReportContactMobile} Mail: #{row.ReportContactEmail}"/>
</af:column>
<af:column sortProperty="ReportStartTime" sortable="true"
align="center" headerText="#{bundle.daily_CStart}"
headerClass="tableHeader"
styleClass="columnData" id="c3" width="40"
>
<af:outputText value="#{row.ReportStartTime}"
id="ot11">
<af:convertDateTime pattern="#{bindings.PersonReport.hints.ReportStartTime.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="ReportStopTime" sortable="true"
align="center" headerText="#{bundle.daily_CStop}"
headerClass="tableHeader"
styleClass="columnData" id="column3" width="40"
>
<af:outputText value="#{row.ReportStopTime}"
id="ot6">
<af:convertDateTime pattern="#{bindings.PersonReport.hints.ReportStopTime.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="ReportDuration"
sortable="true" align="center" width="40"
headerText="#{bundle.daily_CDuration}" headerClass="tableHeader"
id="column4"
styleClass="columnData"
>
<af:outputText value="#{row.ReportDuration}"
id="outputText2"/>
</af:column>
</af:column>
<af:column id="noDet2" headerClass="HeaderGroupEnd">
<f:facet name="header">
<af:outputText id="notext2" value=""/>
</f:facet>
</af:column>
</af:table>
</f:facet>
</af:panelStretchLayout>
</f:facet>
<f:facet name="bottom">
<af:panelStretchLayout id="psl3" inlineStyle="margin:10px;">
<f:facet name="top">
<af:panelFormLayout id="pfl3" partialTriggers="tbl1">
<af:inputText label ="#{bundle.daily_CComments}" value="#{bindings.Comments.inputValue}"
readOnly="true"
inlineStyle="height:80px;"
id="ot1" rows="3" columns="100"/>
</af:panelFormLayout>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>The pageDef for this page :
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.54.7" id="dailyActivityReportPageDef"
Package="com.traxxeo.mtrs.view.pageDefs">
<parameters/>
<executables>
<variableIterator id="variables"/>
*<page path="com.traxxeo.mtrs.view.pageDefs.MTRSTemplatePageDef"*
*id="pageTemplateBinding" Refresh="ifNeeded" />*
<iterator Binds="PersonReport" RangeSize="25"
DataControl="MTRSAppModuleDataControl"
id="PersonReportIterator"/>
</executables>
<bindings>
<tree IterBinding="PersonReportIterator"
id="PersonReport">
<nodeDefinition DefName="com.traxxeo.mtrs.model.views.PersonReport"
Name="PersonReport0">
<AttrNames>
<Item Value="AdminStatusAdminStatusId"/>
<Item Value="AdminStatusId"/>
<Item Value="AdminStatusName"/>
<Item Value="ApprovalDate"/>
<Item Value="Comments"/>
<Item Value="DateDay"/>
<Item Value="ExportDate"/>
<Item Value="FunctionTypeFunctionTypeId"/>
<Item Value="FunctionTypeName"/>
<Item Value="PersonCategoryId"/>
<Item Value="PersonCompanyNr"/>
<Item Value="PersonCountry"/>
<Item Value="PersonEmail"/>
<Item Value="PersonFirstName"/>
<Item Value="PersonId"/>
<Item Value="PersonLastName"/>
<Item Value="PersonLocation"/>
<Item Value="PersonMobile"/>
<Item Value="PersonPersonId"/>
<Item Value="PersonPostCode"/>
<Item Value="PersonReportId"/>
<Item Value="PersonStreet"/>
<Item Value="PersonStreetNr"/>
<Item Value="PlanContactCompanyNr"/>
<Item Value="PlanContactContactId"/>
<Item Value="PlanContactCostCenterId"/>
<Item Value="PlanContactEmail"/>
<Item Value="PlanContactFirstName"/>
<Item Value="PlanContactId"/>
<Item Value="PlanContactLastName"/>
<Item Value="PlanContactMobile"/>
<Item Value="PlanCostCenterCompanyNr"/>
<Item Value="PlanCostCenterCostCenterId"/>
<Item Value="PlanCostCenterCustomerId"/>
<Item Value="PlanCostCenterName"/>
<Item Value="PlanCustomerCompanyNr"/>
<Item Value="PlanCustomerCustomerId"/>
<Item Value="PlanCustomerName"/>
<Item Value="PlanDuration"/>
<Item Value="PlanFunctionTypeId"/>
<Item Value="PlanStartTime"/>
<Item Value="PlanStopTime"/>
<Item Value="ReportContactCompanyNr"/>
<Item Value="ReportContactContactId"/>
<Item Value="ReportContactCostCenterId"/>
<Item Value="ReportContactEmail"/>
<Item Value="ReportContactFirstName"/>
<Item Value="ReportContactId"/>
<Item Value="ReportContactLastName"/>
<Item Value="ReportContactMobile"/>
<Item Value="ReportCostCenterCompanyNr"/>
<Item Value="ReportCostCenterCostCenterId"/>
<Item Value="ReportCostCenterCustomerId"/>
<Item Value="ReportCostCenterName"/>
<Item Value="ReportCustomerCompanyNr"/>
<Item Value="ReportCustomerCustomerId"/>
<Item Value="ReportCustomerName"/>
<Item Value="ReportDuration"/>
<Item Value="ReportStartTime"/>
<Item Value="ReportStatusId"/>
<Item Value="ReportStatusName"/>
<Item Value="ReportStatusReportStatusId"/>
<Item Value="ReportStopTime"/>
<Item Value="WorkCodeId"/>
<Item Value="WorkCodeName"/>
<Item Value="WorkCodeWorkCodeId"/>
<Item Value="AdminStatusFlagColor"/>
</AttrNames>
</nodeDefinition>
</tree>
<attributeValues IterBinding="PersonReportIterator" id="Comments">
<AttrNames>
<Item Value="Comments"/>
</AttrNames>
</attributeValues>
</bindings>
</pageDefinition>The template page :
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:loadBundle basename="Locale.messageBundle" var="bundle"/>
<!--<link href="styles/main.css" rel="stylesheet" type="text/css"/>-->
<af:pageTemplateDef var="attrs">
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>MTRSTemplate</display-name>
<facet>
<facet-name>
main
</facet-name>
</facet>
<facet>
<facet-name>
header
</facet-name>
</facet>
<facet>
<facet-name>
bottom
</facet-name>
</facet>
</component>
</af:xmlContent>
<af:panelStretchLayout id="pst1h" inlineStyle="border:1px solid #D2D2D2;margin-top:7px;margin-left:2px;margin-right:3px; -moz-border-radius: 10px;background-color:#FFFFF0;">
<f:facet name="center">
<af:facetRef facetName="header"/>
</f:facet>
</af:panelStretchLayout>
<af:panelStretchLayout id="pst1m" topHeight="#{attrs.backButton != null ? 30 : 0}"
startWidth="10px"
styleClass="mainPanel">
<f:facet name="center">
<af:facetRef facetName="main"/>
</f:facet>
</af:panelStretchLayout>
<af:panelStretchLayout id="pst1b" topHeight="#{attrs.bottomHeight}"
inlineStyle="border:1px solid #D2D2D2; margin-top:10px; margin-left:2px; margin-right:3px; -moz-border-radius: 10px;">
<f:facet name="top">
<af:facetRef facetName="bottom"/>
</f:facet>
</af:panelStretchLayout>
</af:pageTemplateDef>
</jsp:root>and the template pageDef :
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.54.7" id="MTRSTemplatePageDef"
Package="com.traxxeo.mtrs.view.pageDefs">
</pageDefinition>With this configuration, an error is returned when page is displayed :
javax.el.PropertyNotFoundException: Target Unreachable, 'Comments' returned null
at com.sun.el.parser.AstValue.getTarget(AstValue.java:88)
at com.sun.el.parser.AstValue.getType(AstValue.java:56)
at com.sun.el.ValueExpressionImpl.getType(ValueExpressionImpl.java:180)
at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getValueExpressionType(ValueRenderer.java:172)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputTextRenderer.renderContentStyleAttributes(SimpleInputTextRenderer.java:409)
Truncated. see log file for complete stacktraceWhen template is desactivated, the error disappears. It also disappears when I use #{bindings} instead of #{bindings.pageTemplateBinding} in the af:pageTemplate tag
any idea?
Thanks for your help
StephaneHello Frank,
If I remove the "Comments" data, the table content displays correctly. However, when I try to scroll the table, after the 25 base range rows, the table refresh and goes back to first row, giving following error :
<SortableModel><_toRowIndex> rowkey non valide : [oracle.jbo.Key[10714 ]] type : class java.util.Collections$SingletonList
<SortableModel><_toRowIndex>
java.lang.ClassCastException: java.util.Collections$SingletonList cannot be cast to java.lang.Integer
at org.apache.myfaces.trinidad.model.SortableModel._toRowIndex(SortableModel.java:341)
at org.apache.myfaces.trinidad.model.SortableModel.setRowKey(SortableModel.java:137)
at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:423)
at oracle.adfinternal.view.faces.renderkit.rich.TableRendererUtils.validateRowIndex(TableRendererUtils.java:647)
at oracle.adfinternal.view.faces.renderkit.rich.TableRendererUtils.getDataFetchStartAndSize(TableRendererUtils.java:671)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._handleDataFetch(TableRenderer.java:927)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.encodeAll(TableRenderer.java:494)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.component.UIXCollection.encodeEnd(UIXCollection.java:527)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:273)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:523)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:220)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.RenderUtils.encodeRecursive(RenderUtils.java:70)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:410)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:273)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:523)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:220)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.PageTemplateRenderer.encodeAll(PageTemplateRenderer.java:47)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.encodeEnd(ContextSwitchingComponent.java:153)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:221)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:820)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1501)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:771)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:685)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:261)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.traxxeo.mtrs.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:42)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.traxxeo.mtrs.util.AuthenticationFilter.doFilter(AuthenticationFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Please note that some errors appears before/after the stack :
<UIXInclude><_setupIncludeContext> Appel interdit pour configurer le contexte d'une inclusion déjà en contexteWhat do you mean by 'which could be a case if you use EO in libraries'?
Thanks for your help
Stephane -
Re: Satellite P - Windows Media Center issue
Without any visible virus problems or bug threats Windows Media Center starts to crack out in video release.
Simply random loosing pixels on a screen, and all other similar programs such as wmp, vlc media player, mv2 and Intervideo Win DVD working correctly?I don't know what notebook model do you have exactly and what is wrong there but if you want to have well working Media Centre install OS using delivered recovery media.
After doing this it will work properly.
Maybe you have installed some codecs or some third part application that can have negative influence on WMC functionality. To be honest your posting doesnt offer some relevant info to this issue and it is not possible to say for sure what is wrong there.
Maybe you are looking for
-
I wanted to watch a video on ABC TV. When I started the process I was able to see the commercial (preceding the program), but after the commercial completed it stopped rather than show the program. I encountered the same problem with Orca (a browser
-
Problem with playback from mac to pc?
I recently Created a peroject on a mac containing a large quantity of markers and clips, when I transfered it to my home pc I recieved a notice saying that I needed a third party program for the video to play properly. When I did play the video, its
-
I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Than
-
TS1368 on my ipod touch I am not able to connect to itunes to download apps. Any suggestions?
Can anyone help me. I keep getting a messae saying can not connect to itunes store when I try to download apps
-
Java/html: append information to html file at top, head tag
I've the following code, however I need to append to a specific location in the html doc, mainly the top, between the <head> tags. How can this be accomlished? import java.io.*; public class WriteToHTML { * @param args public static void main(String[