LMS and Web interface

Have LMS 4.0 a web interface for remoute control?

Yes,
LMS do have web interface (GUI) that wil allow you do different task like backing up the configuration of the devices, upgrading IOS, monitioring device proactively, viewing topology of your network, possible almost everything that do exist in the domain of Network management.
To know more about it, kindly visit the below URL :-
www.cisco.com\go\lms
Hope it helps,
Many Thanks,
Gaganjeet

Similar Messages

Assign User Profiles and Web Interface Transactions to Users

Hi EM Gurus,
Has anyone worked with not standard scenarios in SCEM?
They are working well but I can't access them on interface web.
In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
Has anyone accessed not standard scenarios on interface web??
Help, please!
Thanks a lot.
Rodrigo Freitas

Hello Rodrigo,
if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
/admin in the URL of the WCL instead /ehsearch.
Afterwards you should see them also in the drop-down box.
Best regards,
Steffen

Cisco 4402 WLC IOS Upgradation using CLI and Web Interface

Hi,
I would like to know how to upgrade IOS of Cisco 4402 WireLess LAN Controller using CLI and Web interface ?
Can any one help me regarding the same.
Please answer as soon as possible.
Thanks in advance.

Here are the instructions for upgrading the controllers via GUI:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn52.html#wp472449
Instructions via cli:
Cisco recommends that a direct CLI console port connection is used to update the controller software.
1. Make sure a TFTP server is available for the Operating System (OS) software download. Also, keep these guidelines in mind when the TFTP server is set up:
If a download is performed through the service port, the TFTP server must be on the same subnet as the service port because the service port is not routable.
If a download is performed through the Distribution System (DS) network port, the TFTP server can be on the same or a different subnet because the DS port is routable.
The TFTP server cannot run on the same computer as the Cisco Wireless Control System (WCS) because WCS and the TFTP server use the same communication port.
2. Download the desired OS software update file from the Cisco website to the default directory on the TFTP server.
3. Log into the WLC CLI.
4. Issue the ping server-ip-address command to verify that the WLC can contact the TFTP server.
5. Issue the transfer download start command and answer n when prompted to view the current download settings.
This example shows the command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
6. TFTP Path...................................... TFTP Filename.................................. AS_2000_3_0_x_x.aes --OR-- AS_4100_3_0_x_x.aes --OR-- AS_4400_3_0_x_x.aes Are you sure you want to start? (y/n) n Transfer Canceled Issue these commands to change the download settings:
* transfer download mode tftp
* transfer download datatype code
* transfer download serverip tftp-server-ip-address
* transfer download filename filename
* transfer download path absolute-tftp-server-path-to-file
Note: All TFTP servers require the full pathname. For example, in Windows, the path is C:\TFTP-Root. (In UNIX forward slashes (/) are required.)
7. Issue the transfer download start command to view the updated settings, and answer y when prompted to confirm the current download settings and start the OS code download.
This example shows the download command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
TFTP Path......................................
path>
TFTP Filename..................................
AS_2000_3_0_x_x.aes --OR--
AS_4100_3_0_x_x.aes --OR--
AS_4400_3_0_x_x.aes
Are you sure you want to start? (y/n) y
TFTP Code transfer starting.
TFTP receive complete... extracting components.
Writing new bootloader to flash.
Making backup copy of RTOS.
Writing new RTOS to flash.
Making backup copy of Code.
Writing new Code to flash.
TFTP File transfer operation completed successfully. Please
restart the switch (reset system) for update to complete.
8. The WLC now has the code update in active volatile RAM, but the reset system command must be issued to save the code update to non-volatile RAM (NVRAM) and reboot the WLC.
This is a sample output:
The system has unsaved changes.
Would you like to save them now? (y/n) y
The controller completes the bootup proce

Few Issues as a beginer on 'Variables' and 'Web Interface'

Very very new to BPS..
Dear Friends,
I have the following 2 issues ( Actually many.. but this post has restricted to only 2.. )
1) I have created a Characteristic 'Variable' with User Exit and filled by using FM ZXXXX to with some value on Planning Area. No syntax errors.. but looks like this has no affect (or) not triggered when I try to add some values from the 'Layout'??
Are varibles are for different use? (or) Am I missing anything?
2) I have generated WebInterface from a Planning Folder and when I tried to execute in the Web (using BPS_WB).. it showed an authorisation error..
HTTP 403 Forbidden error...
Can any one help me out?
Regards,
Hari

1) I just figured it out that 'The variable' has to be selected in the planning level to make it apply. I also noted that the FM is getting triggered..
I was just defaulting the varible with one value and saw in the debugger that it is doing that.. but that has no affect on the 'displayed' results or when I make new entries from the layout.. ?
can anyone try to explain me whats happening?
regards,
Hari
Message was edited by: Hari Kiran Y

Freeserve/Orange POP3/SMTP and Web interface not recognising credentials

Is there an outage on the email?I was getting my mail fine a couple of hours ago, but now I'm getting the message from my mail client (current Thunderbird) "Sending of password for user arkhamroad.fsnet.co.uk did not succeed. Mail server pop.orangehome.co.uk responded: Invalid login or password" and on the website (https://web.orange.co.uk/id/signin.php?rm=StandardSubmit) Sorry, the details you entered weren't recognised. Please try again.
Have you changed your password recently? Please note that it can take up to four hours for your password to be changed on our systems, so you may need to try again later. The password change portal doesn't recognise my account details either Since I've not changed my p-word, I'm stumped.

rodonn wrote:
My wife, who also has an FSNET acct isn't having a problem.
Curiouser & Curiouser! Nor is my wife. I even added my email a/c in her mail client under her Windows user with exactly the same server settings except the POP3 Account Name and it still didn't work.
The only diff between our email accounts is mine is freeserve.co.uk and hers is orangehome.co.uk. However hers was acquired originally as a PAYG dial-up a/c. Was your wife's? My email came from with my ISP service. I have since changed my email pwd to be different from my BB pwd, which cannot be changed. I did wonder whether the POP3 server has reverted to my original = BB pwd but that still doesn't work.
More curiosities: As you say sending still works, and is received at recipient. I nowadays send on SMTP 587 which is authenticated as the same as the incoming mail server. So the SMTP accepts the pwd that POP3 rejects!

Getting dump after pressing save button in web interface

Hi all!
When i press save button in my web interface. i'm getting dump:
The following error text was processed in the system EDW : Syntax error in program GP1ARALDY6TX0M51YNJ5FNELBCI .
The error occurred on the application server kurmutau_EDW_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
Form: VALUE_TO_SID_CONVERT of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Form: GET_SID of program GP5VHI3S252BZAWN36WKBAS71QH
Form: GET_DIMID_DA of program GP5VHI3S252BZAWN36WKBAS71QH
Form: WRITEIC of program GP5VHI3S252BZAWN36WKBAS71QH
Form: WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
Form: APO_WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
Method: _WRITE_TO_CUBE of program CL_RSDRI_INFOCUBE=============CP
Infocube and web interface were imported from BW3.5 system...
How can i solve this problem?
Thanks in advance...

Go in ST22 and post the short dump to better ubderstand.
Regards

Web Interface - "Execute function before displaying the layout" issue

Hi Experts,
In my project we have converted some BPS planning folder to Web interface. The steps are as below:
1) Open the BPS planning folder using upspm. Copy the web interface as Web Enabled folder.
2) Generate the web interface by clicking on go to --> Generate web interface
3) Run transaction bps_wb. Open the web interface. Then generate web interface again
4) Run the web interface by clicking on 'Display perview'
5) In the web interface there are some some functions which get executed before displaying the layout.
6) For such functions, push button gets created.
7) I have set the visible property of such push button as false.
8) Most of the time, when I am running the web interface, it
is getting executed successfully.
9) Some times, the web interface is not displaying the layouts successfully.In such cases I have observed that "Execute function before displaying the layout" is not working. Due to this some values like Fiscal Year is not getting set. So, the layout is not getting displayed.
10) I understand that it may be due to compilation error.
For example, I might have made some changes in the web interface. It must be saved and web interface must be regenerated before I diplay the interface again. Can you please help me in understanding the reason of this problem.
11) Can you please help me understand the cause of point no 9. Is it a non-issue? What may be the reason that "Execute function before displaying the layout" does not work every time.
Thanks

Will a function that runs, before the data gets saved, work for you? You can configure such a function to run before the save command behind the save button you create in the planning application.

CiscoWorks LMS 3.1: HUM and Web access issue...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hi there,
I would like to seek your counsel with regards to the recent incident that we encountered with our CiscoWorks LMS 3.1 running on Solaris 10.
A few days ago, we received a few complains from our users that they were unable to view the pollers or contents of the TOP-N <CPU | Memory | Interface> Utilization on the HUM’s home page (see attached file, hum_homepage.jpg).
We (tech support guys) checked the pollers’ status and they’re all Active (see attached file, pollers.jpg); we notified our Administrators and requested for a copy of the HUMPortal.log (see attached file, humportal.zip).
The following day, while waiting for the HUMPortal.log, we received reports that users accessing the HUM home page are stuck with the message “loading…” on all TOP-N Utilization reports.
As we were about to re-queue our request from our administrators, we received reports (a few hours ago) that our CiscoWorks LMS is inaccessible via web browser.
We alerted our administrators and they attempted to restart the Daemon Manager (/etc/init.d/dmgmtd); they were able to successfully shut it down but took several attempts to start it up.
As they attempt to start up the Daemon Manager, they encountered the following error message:
# /etc/init.d/dmgtd start
Error: Daemon Management could not start. Trying again
Error: Unable to bind to port, please check port (42340) state and permissions.
Error: If the port is in use, please try starting Daemon Manager once it become free.
After several minutes passed, they were able to start up the Daemon Manager successfully although the CiscoWorks LMS is still inaccessible via web browser.
We requested for a copy of the “pdshow –brief” log and every daemon (as far as I know) seemed to be working fine but it never hurts to ask for help to verify my findings (see attached file, pdshow0818a.log).
As of the moment of this writing, we are still unable to access CiscoWorks LMS via web browser; any insight or suggestion on the next step to take in troubleshooting and eventually solving this problem is very much appreciated.

The port 42340 issue is most likley not related to the HUM issue you described. The latest log entry you provided indicates "Possible reasons for 'No Data' in HUM Portlets could be either Poller is not configured, or Poller is deactivated, or Poller Failure has occurred, or Summarization job did not start." The error is repeated back to the beginning of the file dated Aug 14 16:39.
To focus on the HUM issue:
Did any change occur on or around the 14th that you are aware of?
Please provide some additional debugs:
1. Please enable debug for "UPMProcess"
Log files are stored here: #/var/adm/CSCOpx/log/#
- HUMPortal.log
- upm_summarization.log
- jrm.log
- upm_process.log
2. To set log levels:
*Health and Utilization Monitor > Admin > System Preferences*.
- Select Log Level Settings.
- Select the application module from the drop-down list.
- Select the Debug log level from the Logging Level drop-down list.
Thanks,
Nick

CUCM 8.6, UnityCon 8.6 and Presence 8.6 on ESXi 5 C200 web interface lag

When trying to bring up any web interfaces or even vSphere it is so slow as to also not be usable.. Brand new install on 2 C200 UCS servers.
Before you ask. Yes LRO is disabled according to Cisco's instructions and confirmed. I have CUCM and Presence on one NIC and Unity Con by itself on the other NIC.
Restarting Tomcat does nothing to help..
Even restarting the entire cluster does nothing to help..
All 6 machine Pubs and Subs of each application type were created in ESXi 5 with .ova files and unchanged.
Sent from Cisco Technical Support iPad App
Update!!!!
All lag stops if I turn off the presence subscriber!?!?!?!?!?
What the heck..

Hi mate,
What does RTMT or CLI show about CPU memory and process usage?
Probably should not affect GUI but is correct VMware tools installed as well?
Once you verify apps check what VMware says about performance.
What size ovas did you use? Are you over subscribed?
How long have you waited? Is it just cups performing sync and hogging resources for example
Cheers,
Tim
Sent from Cisco Technical Support iPad App

Flex Application architecture with web and air interface both using common components.

We have a flex based e-learning application. It uses HTTP REST service and webservice to communicate with ASP.Net application to fetch and store data.
We now want to develop an adobe air version of the user interface, which the students can download on their desktop as well as mobiles (Android, others).
What would be a good architecture for such an application which has both web and windows interface. I can see that we can reuse almost 80% of the code of our web version. But I do not want to copy and create a new windows app from the flex web app. I would want to have both co-exist.
Let me know a good article that I can read on this.

I dug deeper and found the concept of Shared Common Library. I am trying to implement that.

How to find the size (and sizelimit) BPS web interface

Hello.
We have build an application with the SEM-BPS webinterface builder.
In the past we had problems with the size off this application. After we had added some new tabs in the application the size limit had been exceeded and the web inteface could not been activated. So we had to remove the new tabs into a new webinterface.
Now we have to add again some new tabs into the webinterface application. That brings up some questions.
Wat is the sizelimit of the webinterface application?
Can we change this limit?
How can we know the size off the current application?
How can we find out the size of a separate tab in the webinterface? (So that we can make a prediction of the size which will be added to the web interface)?
Thanks and regards,
Eldo.

Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.

Safari 2.0.4 and Yahoo Messenger Web Interface

I have been trying Yahoo's messenger web interface, which allows you to use your browswer instead of downloading the actual yahoo messenger. Whenever I goto sign out, safari crashes.
I have all latest updates, the latest flash player, etc.
Anyone have any experience with this new Yahoo Messenger Brower Interface and Safari?

Safari 3 fixed

Customizing look and feel web interface

Hi all,
We are customizing the theme "web interface", but don't appears, when we look for it in "Theme Root". Only appears the themes created by SAP.
the steps that we followed are:
- Copy the theme, with the program BPS_UPDATE_MIMEREPOS
- import the theme in my folder into the node /sap/public/bc/ur/design2002/themes/myfolder
- copy the CSS
- modify and import the fiel .CSS in my folder into the node /sap/bw/mime/BEx/StyleSheets/mycss.css
- Assign the theme with the CSS in table UPWB_THEMES_MAP.
This is all and doesn't work.
best reguard

Thanks Andrea,
He is very useful.
Do you have additional information on the components of the CSS?
For example:
.sapbexaggdata
.sapbexaggdata:visited
.sapbexcalskipmonth
What represent?
Thanks for your help.
Best Regard

Windows 8.1 EPM 10 NW Web interface BPF and Excel Launch error

Hi all
We have a issue with Windows 8.1.
When we try to launch excel from the web interface (Admin) or through a BPF, we get TYPE_E_LIBNOTREGISTERED error.
This is only on the Windows 8.1 machine.
We tested on few machines.
All have the following:
Office 2010 32bit,
Internet Explorer 11 32 bit (even tried with 64bit)
Chrome (on chrome we get com_sap_tc_ui_ria_fcp plugin error)
Mozilla - can't get Mozilla to work at all...doesn't even show the activities or the Launch options. Only Admin launch.
On the Windows 7 machines it works. But not on Windows 8.1.
Already tried to search in the RegEdt the 5.6, 6.6, 7.6 etc but that isn't the issue.
Has anyone ever found this issue?
All other EPM functions work 100% with Windows 8.1.
Also installed SP17 for the EPM office add-in as well as the patch.
Thanks
Johan Fourie

Hi Peri,
You can see this.
Posted by Ashok Babu Kumili.
http://scn.sap.com/community/epm/blog/2014/05/07/configure-epm-add-in-ms-office-excel-and-troubleshooting-configuration-issues
Regards.

Vlan and SSID not showing in AP Web Interface

We have a couple of APs that do not show the Vlans and SSIDs through the AP web interface. If you go to the SSID manager page in web interface, the page comes up but does not show any of the SSIDs configured. The same goes for Services - Vlan. That page comes up but does not show any Vlans configured. If you telnet to the APs, you see the listed mssid and all the SSID interfaces. The SSIDs on the APs are functional and working. This just makes it difficult to use the web interface for these APs. I have tried to compare running configs on APs where web interface is not showing this and on APs that it is showing but cannot see any differences.
Thanks.

Unsupported things are never documented. You can't possibly list all browsers that you don't support.
But if it's not mentionned clearly as supported then it means "it might work but we never tested with it".
Let us know how it goes with the 12.4.21
Nicolas
===
Don't forget to rate answers that you find useful

LMS and Web interface

Similar Messages

Maybe you are looking for