LMS Completion Status Reporting Incorrectly

We currently use Learn.com as our LMS solution. When we publish our Captivate projects to the LMS, users course completion status is marked as
'Completed' after they have opened the course and viewed the first slide. I've set our reporting settings from the Preferences>Quiz>Reporting to Complete/Incomplete and Slide Views only to 100%. I don't understand why it's reporting completed when users have only viewed one slide.

Hi,
Which version of Captivate are you using?
What are the Quiz Reporting Settings? Have you published to SCORM or AICC?
Please let us know.
Thanks,.
Sushma

Similar Messages

SABA LMS Completion Status is always "Successful" -- even if quiz skipped

For a course I'm creating, the SABA LMS Completion Status is always “Successful” even if just 1 slide of the Scorm 1.2 compliant Adobe Presenter course is viewed – doesn’t even need to get into quiz.
A failing grade is also always "Successful". How to get an "Unsuccessful" for skipping the quiz and/or failing the quiz?
Settings:
Reporting - Quiz Manager:
Enable reporting for this project -- checked
Learning Managemenet System (LMS) -- Scorm
Choose Report Data -- Report Quiz results only
Report Pass or Fail -- Report Pass/Fail (should this be Report staus as defined by report data?)
Report Score to LMS as: Percent
Reporting Level -- Report interactions and the score

I have Presenter courses working properly in Saba. Sometimes the issue is your Offering or Content settings in Saba. Could be a combo of having Is Scoring checked and having a Mastery Score set on Course or Offering level.
When you dig down into the Activity History for that transcript completion, what status is listed on the module level? Saba will roll up to a status of Successful/Unsuccessful/Not Evaluated depending on how you have it setup. What Status is your content actually passing back: Completed, Incomplete, Passed, Failed?
Good Luck!

Captivate 4 - LMS Completion Status Updating

Hello,
We recently published Captivate 4 assessments to our LMS (Learn.com LearnCenter) that have a 3 attempt limit and require a score of 80% or greater to pass. We are finding that many will fail the first time, and when they pass the assessment on their second attempt the LMS gains the new higher % score but does not gain the "completed" status. Any ideas on what could be causing this?
Thank you,
Connor

Is the Captivate quiz set for multiple tries? I'd assume so...
If it's sending the updated score, it is likely sending the updated status...
But only way to be sure it to see what the Captivate lesson is actually sending.
If your LMS does not offer any way to 'trace' or otherwise see the actual lesson communication, perhaps try something like 'SCORM Cloud' (websearch) or the Reload Editor. I know the first, and perhaps the second, offer ways to see the actual communication between the lesson and the LMS.
(the official ADL Test Suite also offers this functionality but is more complicated to use, at least last time I tried it).
IF you can validate that the CP lesson is indeed sending the updated status to the LMS, but the LMS is not showing that updated status, then it's something to take up with your LMS vendor.
If CP is not sending that updated status...then it's a CP setting...somewhere...(I don't have any precise things to try, but the setting the quiz to allow retakes would be the first thing to look at).
HTH
Erik

Backup status reported incorrectly

Using Windows SBS 2008, following recreating a partition (D:) which had reverted to RAW from NTFS, I needed to restore the last good backup, which appeared from the SBS Console/Server Backup Properties/Previous Backups to have successfully backed up drives
C: and D:. When moving to restore, I find that this backup was completed with warnings. Expanding this line, it reports an error: "D: Incorrect function". When I look back through the history of the connected backup drive,
I find that it has only backed up the C: drive even though the backup configuration has always been set to back up both C: and D:. As D: drive is the drive which holds all of the data, everything appears to be lost! Is there any way to recover
any of this data?

Using Windows SBS 2008, following recreating a partition (D:) which had reverted to RAW from NTFS, I needed to restore the last good backup, which appeared from the SBS Console/Server Backup Properties/Previous Backups to have successfully backed up drives
C: and D:. When moving to restore, I find that this backup was completed with warnings. Expanding this line, it reports an error: "D: Incorrect function". When I look back through the history of the connected backup drive, I find that
it has only backed up the C: drive even though the backup configuration has always been set to back up both C: and D:. As D: drive is the drive which holds all of the data, everything appears to be lost! Is there any way to recover any of this
data?
Why does SBS Console report backup as successful when it appears that it is NOT successful?

SC Complete Status Report

Hi All;
We are using SRM7 classic scenario where PO is created in ERP. Confirmation takes place in SRM.
Is there a transaction or report which will show the compelet status of the SC as follows:
SC No.
SC date:
SC created by:
SC approved by:
PO No.:
PO created by:
PO approved by:
Cofirmation (GR) made by:
Confirmation Approved by:
If no such report exists, would you please tell me in whic tables i can found these information?
Thanks

Hi
SRM has limited reports .
try
BBP_BW_SC1
BBP_BW_SC2
BBP_BW_SC3
BBP_BW_SC4
transactions
You can explore more BI reporsts if you were connected to BW system..

Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Issue:
I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
Questions:
1. Has anyone used Presenter with CSOD?
2. Has anyone used Presenter with any SaaS LMS?
3. Which settings are required to acurately reports a status?
Thanks,
Dan

On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
Open the scorm_support.js file using Notepad, Notepad++....anything other than Word. From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
var g_nAPI = 1;
if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite. What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS. You can download the test suite here:
http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS. If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking! I would also try reaching out to your LMS's tech support if possible.
Rob
http://www.robrode.com/yabb/

What are the settings under SCORM 2004 to indicate the completion status on LMS

Hi everyone,
I have a captivate file which i have published as scorm 2004 compliant and checked that file on the scorm cloud. It worked well.
SCORM Pacakage does note report partial completion. When a person stops training, we have the progress bar to indicate that they are at 0, 25, 50, 75 or 100%.
Problem: I dont know exactly, what are the settings to enable to indicate the completion status. I tried but it didn't worked.
Please help & suggest the right way to do this..
Regards
Vikas Sharma

anybody there.... pls help

Set the workflow about PPR process as completed status with a report.

Hi Gurus,
I need to complete a workflow and all regarding task from UWL.
To do this, I implemented 2 functions module: the first to execute the dialog step and the second to set the dialog step as completed status.
When I run the report the both function module doesn't work. Sy-subrc return me different result as 0.
If I execute the SWIA T-code, I see all the task and there I execute the "dialog step" WORK ITEM to set it from ready status to started status and after I use "complete manualy" for the same task then the workflow created a new "dialog step" WORK ITEM I do the same with it and the workflow is completed.
So I would like to do the same in a report with SAP_WAPI_SET_WORKITEM_STATUS and SAP_WAPI_DECISION_COMPLETE functon module ... please see my code below:
loop at lit_wi_stat where wi_type = 'W' and wi_stat = 'READY'.
*to set dialog step WORK ITEM as started status.
      call function 'SAP_WAPI_SET_WORKITEM_STATUS'
        exporting
          workitem_id          = lit_wi_stat-wi_id
          status               = 'STARTED'
          user                 = sy-uname
          language             = sy-langu
          do_commit            = 'X'
        importing
          new_status           = lit_wi_status
          return_code          = lv_subrc
      TABLES
        MESSAGE_LINES        =
        MESSAGE_STRUCT       =
*to set dialog step WORK ITEM as completed status
      call function 'SAP_WAPI_DECISION_COMPLETE'
        exporting
          workitem_id          = lit_wi_stat-wi_id
          language             = sy-langu
          user                 = sy-uname
          decision_key         = '0001'
          do_commit            = 'X'
      IMPORTING
        RETURN_CODE          =
        NEW_STATUS           =
      TABLES
        MESSAGE_LINES        =
        MESSAGE_STRUCT       =
    endloop.
But it doesn't work correctly.
Maybe you have a better idea to reproduce the complete process in a report.
Thanks in advance for your reply..
Best regards.
Julien.

Hi Chandni
I would presume that you are calling some activity step to perform some operation ...when this fails, you are passing some flag to the workflow to send the email and the "planned" error!
It's pretty simple then:
1) Analyze the flag using a condition step
2) Use mail step to send the email
3) Call a custom method to raise a workflow exception - workflow will go in error.
More on Workflow Exceptions:
BO Based Exception:
http://help.sap.com/saphelp_nw73EhP1/helpdata/en/4f/372e0cf5d95541e10000000a421937/content.htm?frameset=/en/4f/3457d50a7b5542e10000000a421937/frameset.htm
How you can define custom BO:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0f157e8-456b-2910-8ea5-c57d9267c913?overridelayout=true
Or you can also trigger Class based Exceptions if you are using ABAP OO for workflow (custom functionality via Class using IF_WORKFLOW Interface). Just make sure you make your Custom Exception Class as a child of CX_BO_TEMPORARY or CX_BO_APPLICATION
Regards,
Modak

Incorrect date in Printer Status Report

I just changed a print cartridge today for an Officejet 6500 wireless. The printer system date is today 8-19-11. The Printer Status Report ink install date [#53 on the report] shows 8-13-11. Why? Thanks, Apuleius

I beleive the printer only stores the date to the nearest week.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Captivate 4: 3 Attempts, Score and Completion Status Issue

Hi Everyone,
I hope somoene may have some insight on this issue. We built a quiz in Captivate that has a minimum passing score of 80% and allows the learner 3 attempts to complete it. The quiz should only send a completed status to the LMS if an 80% or greater is acheived. If the learner takes the quiz and passes on the 1st attempt, the quiz is marked as completed and passes the correct score to the LMS. However, if the learner fails the first time, and then gets a passing score on a 2nd or 3rd attempt, the new score is passed to the LMS but the status remains as incomplete. I included a screenshot from a test I ran in SCORM Test track. I failed the first attempt and passed on my second attempt with a 97%. However, as you see it is stated as incomplete. When I passed on the first attempt, it says completed. Any thoughts? Perhaps this is a setting somewhere that is incorrect? We have tried several things and even tried calling Adobe Support (but after an hour and a half of holding and transfers that hit a wall). Any insight would be great!!
Thanks,
Connor

Complete/Incomplete is more related to how many of the slides in the project were viewed all the way through to the end.
If you're talking about a score from the Quiz being at least 80% in order to pass then maybe you should be focusing more on Pass/Fail.
Check your Quiz Settings in Captivate. Do you have it set to report Complete/Incomplete or Pass/Fail?
Maybe what you're seeing here as inconsistency is due to your not watching every single slide all the way through on the second time through.

Completion Status Sent Two Times

I am having a problem with my completion status being sent
twice to an LMS. I have 5 questions that are multiple choice (I
give users two attempts at answering each question). Prior to the
Results page, the results are sent to the LMS and the record is
sent twice, not once, like I would like it to be. I have turned off
"reporting interactions", I've turned off the message when an
answer is "correct"...I am not sure what I am doing wrong. Is there
some way to control the submit button or control how the data is
sent to the LMS? Please help...thanks!

chuckguytoronto,
This message seems quite similiar to someone else posting
with the same
issue. Is this AICC or SCORM? What problem is occuring with
the status
being sent more than once?
Regards,
Andrew

How to set completion status

Hello,
I have a course built in Captivate 3 that automatically moves to completed within our LMS when users open it. How can I set the status to not change until users have gone through the entire course? Any ideas?
Thanks!

Hi Shannon,
In our LMS this occurs if I add the SWF as a Flash file when I upload to the LMS. However, if I enable reporting on the Quiz Preferences pages in the Captivate file before publishing and then import it as a SCORM package in the LMS it uses the LMS customization settings on the Quiz Preferences page to track and set a completion status.

Complete Status after viewing a few pages

We are using an IBM LMS and have found that for all movies
the LMS is generating a completed status when the users only view a
few slides, then close the movie. I currently have the settings at
report Pass / Fail with just one scored button at the end. Some
users close the movie half way through and never reach this button
yet still receive a completed status.

Thanks for continuing to help. Here's what's running when I have Safari open. It's 19 processes. If I close Safari, it's less:
131
Safari Web Content
NisiTomi
0.2
9
124.7 MB
Intel (64 bit)
129
Safari
NisiTomi
3.2
11
50.2 MB
Intel (64 bit)
147
Activity Monitor
NisiTomi
2.2
5
17.9 MB
Intel (64 bit)
93
Dock
NisiTomi
0.0
5
15.4 MB
Intel (64 bit)
95
Finder
NisiTomi
0.0
4
14.1 MB
Intel (64 bit)
94
SystemUIServer
NisiTomi
0.0
5
12.5 MB
Intel (64 bit)
141
mdworker
NisiTomi
0.0
3
10.8 MB
Intel (64 bit)
27
loginwindow
NisiTomi
0.0
2
7.9 MB
Intel (64 bit)
120
SophosUIServer
NisiTomi
0.0
4
6.5 MB
Intel
107
UserEventAgent
NisiTomi
0.0
3
6.1 MB
Intel (64 bit)
139
cvmsComp_x86_64
NisiTomi
0.0
1
6.1 MB
Intel (64 bit)
114
AirPort Base Station Agent
NisiTomi
0.0
3
5.8 MB
Intel (64 bit)
103
Quick Look Helper
NisiTomi
0.0
6
5.7 MB
Intel (64 bit)
98
fontd
NisiTomi
0.0
3
4.6 MB
Intel (64 bit)
115
imagent
NisiTomi
0.0
2
2.7 MB
Intel (64 bit)
142
AppleSpell.service
NisiTomi
0.0
2
2.5 MB
Intel (64 bit)
118
CCacheServer
NisiTomi
0.0
2
1.7 MB
Intel (64 bit)
89
launchd
NisiTomi
0.0
2
1,004 KB
Intel (64 bit)
97
pboard
NisiTomi
0.0
1
856 KB
Intel (64 bit)

Complete Status

My Captivate v1 lessons work great with my LMS. We are now
testing Captivate v2. I am having some challanges with the
"Completed" status.
If a student launches the lesson and views in its entirety,
the lesson marks Completed. This works fine.
If a student Exits before finishing, the lesson marks In
Progress. This works fine.
When a student relaunches the unfinished lesson the
bookmarking works fine, however the lesson never records the
Completed status. The only way to recieve a Complete status is to
restart the lesson from the beginning.
The Captivate v1 settings (which work fine) are the same on
Captivate v2: Using SCORM v1.2, Report Complete/Incomplete, Report
Score to LMS, and Report interactions and the score. The new v2
setting for Report quiz results only is marked but I've also tried
Report Slide views only and Report user access only with the same
results.
This is not a show stopper since most student will view the
lesson in it entirety but I would like the bookmarking capabilities
to work with the Completed status.

My Captivate v1 lessons work great with my LMS. We are now
testing Captivate v2. I am having some challanges with the
"Completed" status.
If a student launches the lesson and views in its entirety,
the lesson marks Completed. This works fine.
If a student Exits before finishing, the lesson marks In
Progress. This works fine.
When a student relaunches the unfinished lesson the
bookmarking works fine, however the lesson never records the
Completed status. The only way to recieve a Complete status is to
restart the lesson from the beginning.
The Captivate v1 settings (which work fine) are the same on
Captivate v2: Using SCORM v1.2, Report Complete/Incomplete, Report
Score to LMS, and Report interactions and the score. The new v2
setting for Report quiz results only is marked but I've also tried
Report Slide views only and Report user access only with the same
results.
This is not a show stopper since most student will view the
lesson in it entirety but I would like the bookmarking capabilities
to work with the Completed status.

Claim status report - PC00_M40_REMS

Hi experts
Claims status report PC00_m40_rems is showing incorrect balance. That is, for example, eligibility is Rs. 50000
Step1: Claim for the month for April is Rs.5000. Claim processed through PC00_M40_REMP. The claim status was successfull.
After the above step, REMS report shows Eligibility Rs.50, 000/- Claim payment - 0, claim due - Rs.5000/-, balance Rs.45000/- and no.of claim 1
Step2: Claim was processed through offcycle payroll - PC00_m40_calc. After this process, the REMS report shows - Eligibility Rs.50000/-, claim payment - Rs.5000, claim due - Rs.5000/-, balance Rs.40,000/- and no. of claim 2
Step3: Then regular payroll was run. After the regular payroll, REMS is showing correct details i.e. Eligibility Rs.50,000/- Claim payment Rs.5000/-, Claim due - 0, balance Rs.45,000/- and no. of claim 1
I suppose, the balance should show correct balance of Rs.45,000/- after the second step mentioned above.
I have maintained bank details - Main bank and Main bank for offcycle.
Kindly guide me.
with regards

hi Sikindar,
In that table SMED has been assigned against my customised wagetype & also has been assigned aginst 00M0 wt;But In PC00_m40_REMP report it is showing calculation only against OOMO wt
Thanks
Sur

LMS Completion Status Reporting Incorrectly

Similar Messages

Maybe you are looking for