LMS Discovery Issue

We have a customer with an issue with LMS discovery.
It will discover new devices but will fail to update them to the DCR, because it does not match the credential set policy when the credential set is defined by Device name and an SNMP OID is used.
They have different devices and depending on the type they use different credentials, Wireless AP’s for example use different credentials to Routers.
They can match on other fields to get a large amount of devices discovered however are still missing the majority.
With little knowledge of this product, can anyone tell me if this is supported?
Thanks
Colin

Hi Colin,
Credentials set policy has nothing to do with the devices getting updated in DCR.
while configuring the device discovery settings do not select any DCR credentilas set.
One thing that you need to make sure is that devices are SNMP reachable and the Community string that you are using in the device disocvery settings should be CORRECT.
Thanks
Afroz

Similar Messages

Catalyst 4507R plus E Switch Discovery Issue

Hi,
I am having issues doing automatic discovery for Cisco Catalyst 4507R plus E Switch IOS 12.2(54)SG, I am using IP ping sweep to discover devices on my network.
When i first setup LMS4.0 with few devices on the network, i discover the C4507 without a problem together with other devices i have on the network but for some reasons now its failing to discover C4507. I have large numbers of WS-C3560X and C4507 on the network, WS-C3560X always discovered just fine.
I tried to use SolarWinds network device monitor I installed on the server to check if there's any SNMP or connectivity issues. I can discover C4507 using Solarwinds without a problem, so im suspecting it could be LMS configuration issue.
Is there any special settings I need to tweak to make this working?

A newer version of IOS should generally be fine.
It's generally the SNMP sysObjectID that LSM keys into. As noted in the table you cited, it should be 1.3.6.1.4.1.9.1.1286 for the 4507R+E.

LMS 3.1 Device Discovery issue

Hello,
I have been getting myself familiar with LMS, but can't figure out why I am having issues seeing some devices. I can't find any solution to my problem on other posts.
I have a server farm connected to my core switch, both can see each other via CDP, and the SF can ping the LMS server. However, I have 'device unreachable' on device discovery and CiscoView. SNMP community strings are the same on each device, and are configured on LMS.
Any suggestions? Thanks in advance!

Hi,
LMS tries to contact each device directly via SNMP. If it can talk directly to the device, the device is added into DCR as Reachable. If it cannot talk directly to the device, the device is deemed as Unreachable and it is not added into DCR to be managed by LMS.
If LMS is unable to communicate it could be due to any number of things including timeout, incorrect community string, snmp-server view, firewall or access list.
A definitive way to determine the issue would be to perform a packet capture during discovery to see the SNMP transaction between LMS and an 'unreachable' device.
You can also try increasing the timeout value.
Thanks.

LMS 4.0 discovery issue

Dear All,
I have a question, can i discover a device with more than one IP address, as i need to discover my remote site router with both of it is IP addresses, as i have two different connections to this router with two different service providers, and i want to make sure that if there is a failure at one provider i still can discover the device using the second IP address ,
Note: i would not like to router LAN through both connections and i would not like to add loopback to my router
Is there is a way to do this
Please help

Dear All,
Please help, does anyone has any idea how this solution can be implemented

LMS Backup issue (related with re-install HUM)

Since the HUM evaluation period expired, I want to reinstall HUM 1.2 (LMS 3.2) because my customer didn't had enough time for evaluation.
I order to do this, I have uninstalled the HUM 1.2 and reinstalled HUM. However, during the re-installation the mandatory automatic backup failed.
The backup.log file doesn't contain any errors (backup completed). A manual backup seems to work fine and the system is working properly.
What is causing this issue? or is there a way to skip the backup performed during LMS 3.2 (HUM only) installation.
thanks in advance for any help

we have purchased a (promo) HUM license now, but it doesn't include the media. How to get a copy of the HUM software
Since I can't use the originally shipped HUM evaluation copy (installation fails on the backup as described in my original post)

SQL Discovery issue

Hello everyone,
I have different issue for SQL DB Engine discovery, for one of the Clustered SQL instance the discovery is not happening and I followed all the steps specified in SQL MP guide and below is the configuration made in general
1) Installed the agent on cluster nodes and enabled the proxy for those agents.
2) Configured the Run as account and liked them to specific SQL profiles as mentioned in SQL MP guide.
3) Necessary permission for low privilege environment has been provided at SQL Nodes, cluster and Database.
when logged on the cluster nodes to investigate further I see different versions of the SQL server is installed (2008 and 2012) on the same node and just wondering whether our SQL MP is capable of discovering these type of nodes?
Any comments or any suggestion how to monitor this type of SQL environment. Thanks in Advance!
Regards,
Bhaskar K

Hi,
Based on my experience, the MP is able to discovery the two versions of SQL instances.
System Center Management Pack for SQL Server
https://www.microsoft.com/en-us/download/details.aspx?id=10631
Are there any errors in the operations manager event log?
Or any errors in the SQL Server error logs on the one of instance?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Discovery Issues with OnCommand Plug-in 4.1 for SCOM 2012 R2

I have a customer who has a NetApp cluster with FAS8040s running 8.2.1 in cluster-mode. The have SCOM 2012 R2 UR6 and the OnCommand 4.1 SCOM plug-ins. I can do an initial discovery of the cluster and it pulls back the SVM, but no other objects are discovered...no LIFs, no Nodes, no Volumes etc. I've been over the install doc many times and have not found where I might be doing something wrong. I've also searched on the interwebs and found a few suggestions, but none have changed the outcome. I've ensured the overrides are appropriate and to be sure its not a rights thing, I'm using "the" admin account. I see no indication of issues in:- The OnCommand Event Log- The OC.SCOM.logs (even in debug mode)- The SCOM task status Any help would be greatly appriciated.

We are now using a Domain account and I still can't get any further. Below are the only indications of issues I can find. ******************************************************************************** Log Name:      Operations Manager
Source:        Health Service Modules
Date:          8/3/2015 6:27:00 PM
Event ID:      22406
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SCOM_SERVER
Description:
The PowerShell script failed with below exception
System.Management.Automation.MethodInvocationException: Exception calling "CreateDomain" with "3" argument(s): "The specified user does not have a valid profile. Unable to load 'Microsoft.EnterpriseManagement.HealthService.Internal, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=121212121212121212'."At line:40 char:12
+     return [AppDomain]::CreateDomain("OC.Cluster.OM.Powershell.NonDefaultAppDoma ...
+            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   at System.Management.Automation.ExceptionHandlingOps.ConvertToMethodInvocationException(Exception exception, Type typeToThrow, String methodName, Int32 numArgs, MemberInfo memberInfo)
   at CallSite.Target(Closure , CallSite , RuntimeType , String , Object , Object )
   at System.Dynamic.UpdateDelegates.UpdateAndExecute4[T0,T1,T2,T3,TRet](CallSite site, T0 arg0, T1 arg1, T2 arg2, T3 arg3)
   at System.Management.Automation.Interpreter.DynamicInstruction`5.Run(InterpretedFrame frame)
   at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
Script Name:   Monitoring.ps1
One or more workflows were affected by this.
Workflow name: DataONTAP.Cluster.Monitoring.GetDataProtectionLagTimePerformanceData.Rule
Instance name: Storage virtual machine SVM_NAME.
Instance ID: {UUID_STRING}
Management group: MG
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          8/3/2015 6:28:00 PM
Event ID:      4666
Task Category: Application Generated
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      SCOM_SERVER
Description:
An application attempted an operation:
Subject:
   Client Name:       OC_ACTION_ACCOUNT
   Client Domain:       DOMAIN
   Client Context ID:   111122222333
Object:
   Object Name:       IsUserAdministrator
   Scope Names:       50585907-7858-4488-ab9c-13e0eaac08be
Application Information:
   Application Name:   Microsoft System Center
   Application Instance ID:   22350934216
Access Request Information:
   Role:           Role
   Groups:           Group
   Operation Name:   User_IsAdministrator__Check (142)
Log Name:      Security
Source:        MOMSDK Service Security
Date:          8/3/2015 6:28:00 PM
Event ID:      26401
Task Category: (3)
Level:         Information
Keywords:      Classic,Audit Failure
User:          DOMAIN\OC_ACTION_ACCOUNT
Computer:      SCOM_SERVER
Description:
Data access operation: User_IsAdministrator__Check
Data access method: IsUserAdministrator
User name: DOMAIN\OC_ACTION_ACCOUNT
sessionId: uuid:UUID_STRING;id=NUM
********************************************************************************

Multiple primary site - Discovery issue

Hi,
I am working on a scenario where there is 1 CAS and 3 Primary sites(PS1,PS2,PS3). At PS1 site, Active directory system Discovery is only configured and all the OU for all the sites are added. On the other two Primary sites this discovery was not configured.
Now I wanted to ask is there any issue due to this , or should I have to configure this discovery on both sites??
Thanks
Pallavi

no, you can still control that. Site Assignment is either based on an AD Query or you hard coding the site code during the install process. Client deployment depends on the method, in this process content boundary Groups and DP's are being used.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

LMS Discovery

Hello friends,
I want to reach remote sites from head quarters LMS,i have a firewall in HQ connecting to mpls router which in turn connecting to all the sites,through MPLS link,i wanna discover some devices on remote location and also after discovery i want to manage them fully,
I wanna know which ports i have to open on firewall for LMS full functionality throught the country for branch locations, for some basic i know ,SNMP.CDP ICMP,and i think there are many more?????? pls ur inputs are needful
Thanks

Just for Discovery? All you need is SNMP (udp/161) and ICMP (if using the ping sweep module). For the rest of LMS, you may need to open tcp/23 for telnet and/or tcp/22 for SSH. You will also need to leave SNMP and ICMP open.

Lms few issues

Hi Netpro
i have lms 4.2 runing on windows , i have the below issues:
1)i cant open the topology service , using IE 8.0 with only java installed in my client that comes built in with lms even though i have applied the same setting mentioned on the configuration guide related to IE setting
2)i have few devices mentioned unconnected even though the have cdp enable with with correct community string
3)i heard that you can send one command to all devices managed by LMS at once , how and from where you can do that?
thanks
ibrahim

LMS may not need a serial number. But still you can get a Contract that covers LMS to open a TAC case.
If it is just a confirmation on that patch you are referring to, you can check that here in CSC as well. If that patch is available in CCO you can download and install and no need of a TAC guidance on it.
-Thanks
Vinod

Cap4 - LMS Completion Issues

I've successfully used Captivate 3 to create a series of courses for our LMS (Hummingbird), and have now moved on to Captivate 4. However, my learners are now finding that our LMS is not giving proper completion credit, regardless of how many times they access and run through the courses. This seems to be happening now for courses created in Captivate 3 & 4. I went so far as to set up our LCR so that credit is given upon access, instead of completion. Basically, these guys should be getting completion credit just for opening the course.
There is no trend with regard to operating system (some are XP, others Win7), browser (we've tested them all...IE7, IE8, Chrome, Opera, FireFox) or Flash version (everyone is on Flash 10). HOWEVER, it seems as if the only folks who can successfully get course credit have an earlier version of Java (Version 6, Update 21 or below). Everyone who has this issue seems to be on Java Version 6, Update 22.
Has anyone else run into a similar issue?

We don't use Hummingbird, but our LMS Settings include an option called 'Finish causes immediate commit'; this is needed when suerver traffic delays the information sent back to the LMS after the course is closed. You might check your LMS Settings for something similar ... good luck!

DFM device discovery issue "Devices stuck in Questioned state"

Hi
We have LMS 3.0.1 installed with DFM 3.0.4 The devices are showing Questioned with Error code "SNMP timeout" with no specific reason. The snmpwalk is coming for the device as I checked with snmpwalk command. The only device discovered as"known" has ICMP permitted from Server to device and no other device has. They only have SNMP permit. Can this affect the dicovery?? or what else can I try....Please suggest!!
Rgds

Yes. DFM requires that all devices be both SNMP and ICMP reachable. DFM uses ICMP to verify reachability to all IP addresses on the device. However, at the very least, the address by which you manage the device MUST be ICMP reachable.

Bluetooth discovery issue in iPhone4

Am having iphone4 unlock version purchased in US and using the same in India. I could never get any of the device discovered in my iphone, ive switched on the personal hotspot, and bluetooth as well.
Even my ipod is not visible/discovered in my iphone4. But ipod recognizes the iphone4. Strange.
till now unsuccessful discovering any device in my iphone. Any help is really appreciated.
Am in India and please let me know how to get a replacement if this issue is not resolved. I dont want to have this much trouble after having paid to get a phone worth 800$
My iphone is having latest ios5.0,1

The iPhone does not support bluetooth file transfer. You can not pair it with another phone or iPod or a computer. You can tether via Personal hotspot, but that's a different animal.
In short, nothing is wrong. You can't do that.

Cisco Works LMS HUM issue

Hi,
I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
It is showing error in JOB history “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
I have Configured HUM just 3 days back and all others application had been configure 4 months back.
Please help.
Regards,
DJ

Hi Clarke,
Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
Regards,
Dinesh Joshi

SCCM 2012 Network Discovery Issue

Dear Team,
I want to discover my client less devices (routers, switches, & printers) in SCCM 2012 R2 via SNMP or Subnet Mask, we don't have DHCP in environment. How do I discover this client less devices what are the settings require on SCCM server & on
client less devices (routers, switches, & printers)

The subnet information can be retrieved from a device specified on the SNMP Devices tab or you need to configure the subnet manually in Subnet tab, then Network Discovery will query the network devices.
Juke Chou
TechNet Community Support

LMS Discovery Issue

Similar Messages

Maybe you are looking for