LMS duplictae events; one with dns and one with dns(ip) in component name

Hello all,
we have LMS 4.2 installed and added devices;
Now if for example a device is not reachable we get two messages with same failure ;
only the componente name is different
-     one event with "dns" in component name
-     one with "dns(ip)"  in component name
dns == hostname
Thans in advance

Is it possible you have the devices twice in fault management?
Once with the IP address as their name and once with their dns name?
If that is the case you will find the same in the DCR.
Try to delete the devices that only have ip address as name.
Cheers,
Michel

Similar Messages

  • How do I split a single event with many clips into multiples events, one event per date?

    I archived the video from my AVCHD camera into a Final Cut video archive. Later I imported this into iMovie. All the clips from this archive (spanning several months) are dumped into a single event. If I recall, older versions of iMovie would import video into separate events for each day. Then I would go through and give each event a meaningful name (e.g., "Mary's Birthday").
    This is what I would like. Is there a way to split this very long event into multiple events, one for each day that is present in the event?

    Not automatically but with imovie 10 you can create new events with any name you like then move clips into them from other events  (Just like FCP 10.1).   See:
    http://help.apple.com/imovie/mac/10.0/#mov1d890f00b
    You can also choose to display clips in an event grouped by date.
    Geoff

  • Is it better to have one Event Structure with more (10 or 15) cases or several with fewer?

    I have several buttons and events on the GUI of my app to monitor. Would it be better to use one Event Structure with several cases (10 or 15) or have a couple and split the cases evenly? None of the cases have much processing to handle, so there is not a time lag issue. I am just worried about overloading the structure. One of the tech support guys mentioned that the event structures are not that hard to get confused.
    Has anyone had any problems with Event Structures?

    I use event structures very often in my code. I use them just to handle the interface and to run small code. I have had event structures that handled over 50 user interface events and never had a problem. In my personal opinion If there was any code to run I would let the event structure handle the the user interface event that fired a que in another while loop that handled the code.You can find examples on this, if not I will send you one. It is just good programming practice for beginners because it will alow you to build more robust VI's in the future.
    Hope this helps
    Joe
    Joe.
    "NOTHING IS EVER EASY"

  • Since loading mavericks my calendar posts events one hour late.  That is, if mtg invite is for 9am it posts at 10am.  my pc clock and time zone are correct.

    Since loading mavericks my calendar posts events one hour late.  That is, if mtg invite is for 9am it posts at 10am.  my pc clock and time zone are correct.

    Hey Armando Stettner,
    Thanks for the question, and what a great question it is!
    With time zone support on, you can edit an individual event and change the time zone for that event. This list will include options for your default time zones, UTC, and "floating" - the latter of which is what you are looking for. Floating changes the event to occur at the specified time, local time.
    For information on changing an event's time zone, see the following resource:
    Calendar: Change an event’s time zone
    http://support.apple.com/kb/PH11531
    I look forward to hearing how this works for you.
    Cheers!
    Matt M.

  • Events problem with (Java and ActiveX)

    Hi,
    I use an ActiveX component with Java and i've got a problem with events.
    Java classes were generated with Bridge2Java (IBM).
    In order to manage events I added a listener in my application :
         javaMyActiveX = new MyActiveX();
         javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
    I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
    The ActiveX generates two types of events :
    - The ones are directly generated by methods.
    - The others are generated by a thread.
    With MS Products (VB, Visual C++, Visual J++), I catch all events.
    With java (jdk 1.4), I catch only events generated by methods.
    Can anyone help me.

    I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

  • How do you Combine separate LMS Tutorials into one Long

    I have created a 55 minute tutorial with audio. It is 6
    captivate projects (~400 slides). I have created a stand alone
    package so the user can view the entirety and jump to each chapter
    using the menu in the skin. I have published the same taking out
    the menu in the skin as separate LMS tutorials. Up to now everyone
    has been happy to add each project as a chapter to their LMS
    system. One of my clients wants the class to be one long tutorial
    instead of the separate modules, much like the standalone version,
    but does not want to install that on each users machine. How do you
    do that? Given the limits of the software, I cannot just make it,
    one Captivate project. I tried linking the project and having all
    the files in one directory but that doesn't work. There must some
    sort of way to change the html or xml needed to run in the LMS, but
    I'm not sure where to begin.

    Short of some very fancy Javascript hacking, you cannot make
    separate projects appear as one long continuous project to an LMS.
    Even with some Javascript modifications, the fundamental
    reporting process is not designed to work that way so there's no
    guarantee you'll ever get it to work.
    The idea would be to link one project to the next using daisy
    chaining while suppressing the API.LMSFinish("") command (or
    whatever one tells the LMS that the user reached the end of the
    content) until the end of the last project is reached. It gets much
    more complicated if you're also wanting to track scores of
    individual interactions in each file.
    If you've got some Javascript skills, or just want to try,
    you can edit the scorm_support.js file in:
    C:\Program Files\Adobe\Adobe Captivate
    3\Templates\Publish\SCORM_supportxxxx
    where xxxx is the version of SCORM you're publishing to.
    If you're using another form of reporting, then the various
    other publishing templates can be found one level up in the Publish
    folder.
    The hard part will be figuring out which command Captivate is
    sending to the LMS (via the communication functions in
    scorm_support.js) that tells the LMS the user has completed the
    content. You then need to add logic that only passes on that
    command if it's coming from the last file.
    Do be sure to make a backup before editing any of the default
    files. By making changes in the Captivate install directory, you're
    changing how all files get published. You want to be able to go
    back to the default behavior once your special functionality is
    either working correctly or you decide it can't be done.
    Best of luck,
    John

  • Calendar events one hour ahead

    Hi
    Just got my new 4s and have synced my calendars between Outllok on Windows 7 and my phone.  I have an evet that runs every Friday between 18:45 and 20:00 which is set up as a recurring event.  It displays fine on my calendar at the minute by looking ahead to the end of march the time displayed seems to have shifted forward an hour to 19:45 - this I believe coincides with the change to BST.  Obviously my event still hapens at 18:45 and I would like the calendar to display this.  The strange thing however is when I go in to edit the event on my phone - on the edit screen it shows as 18:45, yet when I save this it still displays as 19:45 on the event screen ....
    Have I set something up wrong?  Can I do something to get the calendar to display correctly?
    Thanks in advance
    Nigel

    Thanks for the above - played around with setting etc on my phone but with no luck.  The only way I seem to be able to get the correct time to to create two recurring events - one until BST and the other after which is hardly ideal - I must be doing something wrong!!  Just noticed that exactly the same thing happens on my iPad

  • I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • No event method with matching name and signature found on EventSet

    Dear,
    I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
    No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
    This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
    Thanks for your help,
    Regards,
    Mathieu

    It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
    See you,
    Mathieu

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • I have 2 Apple iPads with the same Apple account name.  How do I set up one with a different Apple account name?

    I have 2 iPads with the same Apple account name.  How do I set up one with a different Apple name?

    Why is the reason you want a different apple id on them? Need more details to make sure we don't accidently set up the self destruct feature and destory the planet.

  • If a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

    if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

    Hi,
    It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info  (There are about three or four servers involved with getting data to your Buddy list)
    I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
    You have one in one group and in another they appear to be Off Line.  However iChat will still Link them and Show their Capabilities when you Right Click.
    One way of checking this is to double click them to open a Text Chat Window.
    At the top is the Recipients Bar  (See View Menu when  Text Chat is Open).
    This gives you the option to chose a different Buddy Name if the contact has two  (It offers To and From options if you both have Multiple Accounts).
    Pic of an Old Chat to someone with Multiple "Names"
    They have an @Mac.com name and  Jabber ID  (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
    You can see I have a Google and three AIM Logins I could use to Speak to them.
    9:48 PM      Sunday; December 4, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • There was add one and i lost it after the update and i don't remember it's name

    there was add one and i lost it after the update and i don't remember it's name
    it was add-on to show me the source of any click able content
    like pics on twitter or Facebook
    also the videos on youtube
    and it showed a little icons with small pic shape on it with different colors
    and also sometimes with a small lock shape on it
    now i need to know what this add -on name or how to get it back

    Add-ons are not auto-deleted as far as I know...
    It's possible that the extension or userscript simply doesn't work correctly in Firefox 22 due to a change in Firefox. If you look at the add-on pages, often the reviews will mention whether the add-on is broken in a new release.

  • Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

    Hello
    How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L  switches that my organization has and cannot managed them..
    I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
    "Error while downloading package information from Cisco.com for the selected  products. See the log file for details".
    Also i can not run EOL/EOS inventory report. The message is
    " INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
    The server  has access to www through proxy without any restrictions.
    In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
    The LMS 3.0 December 2007 has the following products
    LMS
    3.0.1
    16 May 2008
    CiscoWorks  Common Services
    3.1.1
    02 Jul 2009, 07:44:58 EEST
    2.
    Campus  Manager
    5.0.5
    11 Oct 2009, 07:36:10 EEST
    3.
    CiscoView
    6.1.7
    02 Jul 2009, 07:45:05 EEST
    4.
    CiscoWorks  Assistant
    1.0.1
    02 Jul 2009, 07:45:05 EEST
    5.
    Device Fault  Manager
    3.0.5
    12 Jun 2010, 07:31:48 EEST
    6.
    Internetwork Performance Monitor
    4.0.1
    02 Jul 2009, 07:45:11 EEST
    7.
    Integration  Utility
    1.7.1
    02 Jul 2009, 07:45:14 EEST
    8.
    LMS Portal
    1.0.1
    02 Jul 2009, 07:45:16 EEST
    9.
    Resource  Manager Essentials
    4.1.1
    02 Jul 2009, 07:45:17 EEST
    Has anyone knows what can be the problem??.
    Thanks

    Hi,
    the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
    Symptom:
    After the 16th of June 2011 LMS will no longer  be able to download Software and Device Package updates, or PSIRT and  End of Sale/Life information from CCO
    Conditions:
    Hosted  services in Cisco.com that are being leveraged by LMS, for downloading  the latest Software and Device Package updates, as well as the PSIRT and  End of Sale/Life information are being migrated to a new framework and  the old services will be retired.
    This will affect all LMS 3.x and 4.x versions.
    Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
    Workaround:
    Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
    Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
    Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
    The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
    But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
    Sven

  • Aperture exports Events to iPad, iPhoto and iWeb with only first picture

    I have an issue with publishing photos to iPad, iPhone and iWeb from Aperture. When I want to publish photos I do find list of all Events in the device like in Aperture Library but each Event contains just the first photo. The remaining photos are absent although I can find them among all the pictures in the Photo Browser. This indicates that the photos have been transferred to the device but for some reason not included in the Events.
    In Aperture each Event opens with all the photos contained. Did I miss something in the setting of Aperture or the device?
    Milan

    This problem is still ongoing.... Having synced my entire library to my iPad, not having projects in date order is a real pain - and makes finding a certain project very tedious.
    Does anyone have any kind of fix for this yet?
    Alexander, in what way did Apple acknowledge this problem?
    Thanks,
    David

Maybe you are looking for