LMS Prime 4.2 Soft Appliance on UCS

Hi,
I'm trying to install LMS Prime 4.2 Soft Appliance on UCS C220 M3 with RAID controller . I have configured RAID 1 and using
Cisco_Prime_LAN_Management_Solution_4_2.iso, but when i boot from KVM DVD I received this error:
Do you have any ideas how to process from here?
Thanks in advance
Regards

Sorry, NCS server (PRIME-NCS-APL-K9) was the option I was referring to. I didn't realize they specified the same image for UCS servers.
I do note that the prerequisites specify (here) "LMS 4.2 is supported on the UCS B-series blade servers (B200-M1 or M2 and B250-M1 or M2) and C-series rack mount servers (C200-M1 or M2, C210-M1 or M2, C250-M1 or M2, and UCS C460)". It could be that the ISO does not have the necessary drivers for your RAID controller in the M3.

Similar Messages

  • LMS Prime 4.1 soft appliance backup

    Hello,
    We have an installation of Cisco Prime LMS 4.1 soft appliance on VMware and i would like to ask if it is possible to backup the database on an external drive other than the 'local' LMS hard disk. Is it possible?
    Regards,
    Nicos

    Same as windows or solaris. You can only backup to a local drive.
    Making a script that does some compression (the backup is not compressed now, big waste of space) on the backup directory  and pushes it to a remote NAS is not that hard.
    Cheers,
    Michel

  • Cisco Prime Soft Appliance not saving changes to syslog.conf

    Greetings,
    I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base.  My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
    local4.info  /var/log/syslog_info
    I have attempted this several times; we're approaching at least 5 attempts today.  I have attached text files created from putty logs where I've attempted to make the necessary change.  I appreciate any assistance the community can provide.
    Regards,
    Rob

    Hi, Afroz,
    I really appreciate your assistance, but I'm afraid my hopes have been dashed.  The syslog.conf reverted to its original configuration.  I will go through my steps to be sure that I understood your suggestion properly.
    I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt.  Then, I exited the shell to the console, issued the 'write mem' command, and closed the session.  Upon my reconnection, I found that my changes to the syslog.conf were not saved.
    Did I make the correct edits in the correct places?  Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
    Regards,
    Rob
    Edit:
    I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations.  Is that correct?  If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
    My thanks.

  • LMS 4.2 Soft Appliance - No Remote Backups?

    Hi All,
    I have a new installation of LMS 4.2 on the Soft Appliance and seem ot be only able to configure backups to the local disk?
    There is no option to select any of the configured repositories like there is in ACS.
    I can backup to /localdisk, after change to filesystem as below:
    chgrp casusers -R /localdisk
    chmod 0775 /localdisk
    but the issue is, how to I get this off the box in an automated fashion so it can be part of our corporate backup schedule?
    Thanks,
    Aaron

    To backup LMS you need to use the built-in backup utility. The target for your backup can be on a different partition / mount point. See this section of the admin guide.
    Almost any database server or server which relies heavily on a database (such as LMS) requires that backup solutions be tightly integrated so as to preserve the data integrity.

  • LMS 4.2.2 virtual appliance fresh install : DCR Server Error

    Hello,
    I have installed a new version of LMS 4.2 on virtual appliance (VMware 4.1) and I have an issue.
    When I go the "Device Administration --> Manage Device State" I have the following error :
    Server Error
    Error
    Error in communicating with DCR Server. For more details click here.
    DCR Server may be down. Please start the DCR Server and then refresh the page.
    Following the details link I have : (I did all the check written below).
    DCR Server Error
    The communication error may be due to the following reasons:
    The DNS resolution does not match with server assigned IP Address. Workaround: DNS resolvable IP Address should be same as server IP Address. DHCP is enabled in the server. Workaround: DHCP should be disabled in the server. The server’s original IP Address may have changed. Workaround: Restart Cisco Prime Daemon Manager. CTM registry corruption has occurred due to rebooting the server without stopping the Cisco Prime  Daemon Manager. Workaround: Delete the ctmregistry and ctmregistry.backup file in  NMSROOT/MDC/tomcat/webapps/cwhp/WEB-INF/LIB and then restart the Cisco Prime Daemon  Manager. DCR Server and related process might be down. Workaround: Check the processes to make sure DCR Server is running, and restart it if not. The hostname change is not done by the hostnamechange.pl in LMS. Workaround: Hostname change should be done using NMSROOT/bin/hostnamechange.pl in LMS. LMS self signed certificate would have been expired. Workaround: Regenerate the certificate and restart the daemon manager.
    I try to reinstall LMS 4.2 with or without patches 4.2.1 and 4.2.2 I always have the same problem. The DCR server process is running.
    Here the result of the show application status LMS in SSH :
    S-CISCO-LAN-MS/sysadmin# show application status LMS
      Process               State                                     Pi
    d
      ESS                   Program started - No mgt msgs received    27
    14
      EssMonitor            Running normally                          29
    50
      EventFramework        Program started - No mgt msgs received    32
    95
      SyslogCollector       Running normally                          32
    96
      RMEDbEngine           Program started - No mgt msgs received    32
    97
      DfmBroker             Running normally                          34
    24
      DfmServer             Running normally                          36
    62
      DfmServer1            Running normally                          36
    63
      FHDbEngine            Program started - No mgt msgs received    36
    64
      EPMDbEngine           Program started - No mgt msgs received    40
    81
      EPMServer             Running normally                          42
    20
      AdapterServer         Program started - No mgt msgs received    43
    20
      AdapterServer1        Program started - No mgt msgs received    43
    21
      FHServer              Running normally                          43
    22
      INVDbEngine           Program started - No mgt msgs received    43
    23
      PMServer              Running normally                          4582
      IpmDbEngine           Program started - No mgt msgs received    4708
      UPMDbEngine           Program started - No mgt msgs received    4840
      UPMDbMonitor          Running normally                          4949
      ANIDbEngine           Program started - No mgt msgs received    4953
      MACUHIC               Running normally                          4990
      UTLITE                Running normally                          4991
      CmfDbEngine           Program started - No mgt msgs received    4992
      CmfDbMonitor          Running normally                          5104
      DFMLogServer          Program started - No mgt msgs received    5106
      DFMCTMStartup         Administrator has shut down this server   0
      FHPurgeTask           Never started                             0
      DFMMultiProcLogger    Program started - No mgt msgs received    5108
      CSDiscovery           Never started                             0
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          5109
      Tomcat                Program started - No mgt msgs received    5110
      TomcatMonitor         Running normally                          5206
      Apache                Running normally                          5567
      DCRServer             Running normally                          5580
      CMFOGSServer          Program started - No mgt msgs received    5641
      TISServer             Program started - No mgt msgs received    5642
      DFMOGSServer          Program started - No mgt msgs received    5757
      NOSServer             Running normally                          5795
      PTMServer             Running normally                          5796
      InventoryCollector    Running normally                          5797
      Interactor            Program started - No mgt msgs received    5885
      InventoryCollector1   Program started - No mgt msgs received    5886
      Interactor1           Program started - No mgt msgs received    6116
      UPMProcess            Running normally                          6117
      WlseUHIC              Running normally                          6118
      UTManager             Running normally                          6119
      VNMServer             Program started - No mgt msgs received    6120
      EssentialsDM          Running normally                          6121
      ICServer              Running normally                          6310
      EnergyWise            Running normally                          6581
      ConfigMgmtServer      Running normally                          6582
      PMCOGSServer          Program started - No mgt msgs received    6583
      ConfigUtilityService  Running normally                          6584
      CAAMServer            Running normally                          6585
      IPMOGSServer          Program started - No mgt msgs received    6586
      TopoServer            Program started - No mgt msgs received    6587
      LicenseServer         Program started - No mgt msgs received    6588
      FDRewinder            Never started                             0
      NameServer            Program started - No mgt msgs received    6591
      NameServiceMonitor    Program started - No mgt msgs received    6792
      EDS                   Running normally                          6870
      ANIServer             Running with busy flag set                7224
      UTMajorAcquisition    Never started                             0
      EDS-GCF               Running normally                          7257
      jrm                   Running normally                          7258
      DataPurge             Administrator has shut down this server   0
      IPMProcess            Program started - No mgt msgs received    7535
      CTMJrmServer          Administrator has shut down this server   0
      SyslogAnalyzer        Never started                             0
      ChangeAudit           Never started                             0
      diskWatcher           Running normally                          8381
    I run out of ideas...
    Regards,
    Abel

    Hi Afroz!
    Thanks for the quick reply!
    1) I checked files - and indeed, the third link of the file was empty.
    I restored contents of the same test server (as an attachment - original files) - now everything is working fine. Many thanks for your advice!
    Because of what could this happen?
    Current settings are as follows (i did not change them):
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
    -rw-r--r-- 1 casuser casusers 1037 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
    -rw-r--r-- 1 casuser casusers 1084 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    -rwxr-xr-x 1 casuser casusers 1104 Aug 20 12:07 /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    2) It was also noted that if address on the link "Inventory>Device Administration>Discovery>Schedule", then an error message appears:
    Error
    Error in getting the Discovery configuration information, please configure Standard / Custom Discovery and start the schedule.
    - no any records for Discovery Schedule and not accessible button Add (for add new Discovery Jobs).
    This is related errors?

  • LMS Prime: After adding a new Certificate LMS Services not starting

    Hello,
    we changed the LMS from a self signed certificate to a certificate issued from our corporate ca. Since about 30 services could start anymore. We are using LMS 4.1 on a Soft Appliance.
    I verified the certifcate with the SSLUtil and everything looked just fine.
    Any ideas?
    Affected are following services.
    ANIServer
    ChangeAudit
    CMFOGSServer
    ConfigMgmtServer
    ConfigUtilityService
    CSDiscovery
    CTMJrmServer
    DCRDevicePoll
    DFMOGSServer
    EngergyWise
    EssentialDM
    FDRewinder
    FHPurgeTask
    ICServer
    Interactor
    Interactor1
    InventoryCollector
    InventoryCollector1
    IPMOGSServer
    IPMProcess
    NOSServer
    PMCOGSServer
    PTMServer
    SyslogAnalyser
    TISServer
    UPMProcess
    UTMajorAcquisistion
    VNMServer
    WiseUHIC
    Regards
    Alex

    I enabled debugging for the dcr server and i found in the daemons.log this entries.
    In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : ur
    n "ogs_server_urn" : Not found !!
    27/Sep/2011 17:01:27:152 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    27/Sep/2011 17:01:27:152 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    27/Sep/2011 17:01:27:152 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    In EPMOgsAdapter:since isOGSup is not true
    In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : ur
    n "ogs_server_urn" : Not found !!
    Does anybody knows what the OGSServer is?

  • LMS Prime 4.1 unable to update dfm and other

    Hi all,
    I have a LMS PRIME 4.1 (virtual soft) and i try to update "software" but alerady fail with the similare message =>dfm 1.xx is required, but i not arrive to upgrade dfm....
    For information the device package are installed corrcetly.
    Best regards

    Thanks much.
    Indeed after I moved back the apps, they are now updating. I guess that's the trouble for being too anal.
    One more thing, after iPhoto is updated, it still gives me a message "A photo has been found in the iPhoto library that was not imported", but if I click "Yes", nothing was imported, and there is a Recovered Photo folder, but it was empty.
    Any suggestions on the fix?
    Thanks again.
    John

  • LMS4.1 soft appliance 1st aid

    Hello,
    Im new with the LMS4.1 soft appliance and got some questions after 1st touch with it:
    1. Where can you get the documentation about the very special LMS-appliance-CLI? Is it possible to SSH to the linux-shell directly?
    2. What is the default root password?
    3. necessary Filesharing (e.g. for csv imports from old system) options:
    a) SCP: with pscp from a win-client to LMS I get "cant get vty from remote host ...". Are there working compatibility options for common scp-clients?
    b) Is it possible to setup an FTP server on LMS appliance?
    c) Has SAMBA been installed, so that it is possible to make CIFS mounts?
    (1st workarround = FTP server at the win-client)
    4. What means the 1st "Access Denied" message after connecting via SSH and SCP successfuly?
    5. Where is mping located?
    Thx for hints,
    Steffen

    Developed a working solution for SCP based file exchange with LMS-Linux-Appliance:
    LMS Appliance:
    carshell> shell
    sysadmin # useradd -g casusers -d /home/scp -s /bin/bash -c "SCP user for file transfer from and to LMS" scp
    sysadmin # passwd scp
    sysadmin # ...
    WinSCP-Settings:
    1. create a new profile with the LMS-IP and scp user
    2. force SCP as transport. In SSH version-2, SFTP is the standard scp transport. So you will need a combination of version 2 and SCP, because SFTP is not installed at the LMS linux appliance.
    The reason for the need of an extra user is: SCP transport needs a shell and carshell is not a proper shell to handle SCP commands beside Default Shell enforcement doesnt work with WinSCP.
    3. optional: preset remote dir: /var/adm/CSCOpx/files/rme/dcma/shadow
    Steffen

  • LMS PRIME 4.2 integrating with ACS 4.2

    Hello,
    i would like to integrate new lms prime 4.2 with acs.4.2 . .. !!
    is there document or user guide for this version of lms?
    Thanks in advance.
    Marwan

    IN LMS 4.2 there is nothing which is known as Integration (like LMS 3.x), since it added feature RBAC.
    Now ACS can just be used as PAM to have ciscoworks authenticated for Tacacs+ or Radius. After the auth is done, you should have a authorization set in LMS locally for user, else it will be given a default HELP DESK access.
    For more details check :
    Authentication Using Login Modules - Overview
    -Thanks

  • LMS Prime Java Patches

    Does anyone know if there are plans to develop a LMS Prime 4.2 software patch    for   the recent  Java  client updates? Not surprisingly our Topoogy Services feature doesn't work  with client side Java patches applied   

    Hi Bryan,
    Uninstall Java from your client machine, Launch topology on the client machine and let LMS decide the best version. It would choose the version as suggested by Afroj and then hopefully you would be able to launch topology at your client site.
    Get back in case you still are facing problems.
    Regards,
    Syed Khalid

  • Prime network control system appliance (NCS)

    Hi,
    i have a new cisco prime network control system appliance (NCS)
    I completed the initial installation however post installation it performed a reboot and is now stuck at Init Level 3.
    I have restarted the machine several time but the same result.

    Umm a new appliance should have had the application pre-installed. Were you upgrading?
    In either case, you'll probably need to open a TAC case. Even without Smartnet you should have at least 90-day warranty support

  • WS-X6848-SFP module are supported with LMS Prime 4.1 and 4.2

    Hi,
    I would like to know if WS-X6848-SFP modules are supported with LMS Prime 4.1 and 4.2.
    Thanks for your help,
    SILVIA

    It looks like they just added the WS-X6848-TX variant with the latest C6000IOS CiscoView package update (Version 37, dated 31 July 2012 - readme)
    I'd expect the -SFP variant should be in the next update.
    You should open a TAC case to make sure that it's brought to the attention of the dev team if they aren't already working on it. One of the tenets of Cisco Prime LMS is "Day 1 support" of new devices.

  • LMS Prime 4.2 instalation fail

    Hi,
    I have problem with Cisco LMS 4.2 Prime installation.
    My system specification:
    Freash instalation of Windows Server 2008 R2 Enterprise Edition 64Bit on VMware vSphere Hypervisor 4.1 (ESXi server 4.1).
    Hardware:
    16GB RAM, 256 GB HDD, CPU E5420.
    When I started installation I get an error:
    ERROR: db not found
    ERROR: Component db is not found.
    mdcbase : depends on: cmfwd plug db ess
    cdone : contains: cmfwd plug cmf mdcbase
    cdone : contains: cmfwd plug cmf mdcbase
    Maybe someone know the solution for that error and can help
    Thanks for any help

    You should ideally open a new thread, instead of replying to a 2 years old thread to continue. You could use link for reference.
    Which Server version are you using? Is LMS 4.2 already installed on the machine?
    LMS 4.2.5 is is not the entire installable package. It needs to have LMS 4.2 installed already. Following is the Upgrade path to LMS 4.2.5:
    Current LMS Version
    Type of Upgrade
    Procedure
    LMS 4.2.3
    Remote migration
    1. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data.
    2. Install LMS 4.2.5
    3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
    Direct migration
    1. Install LMS 4.2.4
    2. Install LMS 4.2.5
    The backup data is automatically migrated during installation.
    LMS 4.2.2
    Remote migration
    1. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data.
    2. Install LMS 4.2.5
    3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
    Direct migration
    1. Install LMS 4.2.4
    2. Install LMS 4.2.5
    The backup data is automatically migrated during installation.
    LMS 4.2.1
    Remote migration
    1. Install LMS 4.2.2
    2. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data.
    3. Install LMS 4.2.5
    4. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
    Direct migration
    1. Install LMS 4.2.2
    2. Install LMS 4.2.4
    3. Install LMS 4.2.5
    The backup data is automatically migrated during installation.
    LMS 4.1
    Remote migration
    1. Install LMS 4.2 and take a backup of the LMS 4.2 data.
    2. Install LMS 4.2.5
    3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5
    Direct migration
    1. Install LMS 4.2
    2. Install LMS 4.2.5
    The backup data is automatically migrated during installation.
    For details on installing procedure of LMS 4.2.5, please check its release notes here :
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2-5/release/notes/lms4_2_5_release_notes.html#14050
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them.**

  • Understanding licenses/PAK - LMS/Prime Infrastructure.

    Hi,
    I purchased an upgrade LMS 3.2 to Prime Infrastructure 1.2 and one more license for 300 devices.
    I received 6 differents PAK numbers for:
    Cisco Systens - R-PI12-UP-K9
    L-PI12-LF-300-LIC - Prime Infrastructure 1.2 - Lifecycle - 300 Device Lic PAK
    L-PILMS42-300-U - Prime Infrastructure LMS 4.2 - 300 Device Maj Upg Lic
    R-PI12-BASE-K9 - Prime Infrastructure 1,2 Base License and Software
    Cisco Systens - R-PI12-K9
    L-PI12-LF-100-LIC - Prime Infrastructure 1.2 - Lifecycle - 100 Device Lic PAK
    L-PILMS42-100 - Prime Infrastructure LMS 4.2 - 100 Device Base Lic
    R-PI12-BASE-K9 - Prime Infrastructure 1,2 Base License and Software
    I'll need to download 6 .lic files and install all?
    Thanks.

    PI and LMS are both entitled products with your upgrade. You may install one, the other or both (but on separate hosts).
    When you install either, you will need to use your Product Authorization Keys (PAKs) to download two license files - one for the base 100 devices and another for the 300 devices. You will need to do this separately for each product.

  • LMS4.1 soft appliance: cant view Configs in GUI

    Hello,
    Cant view Configs in Version Summary or Version Tree. After klicking a config, a forever loading white Window opens. I tried this with many configs and after a reboot of the LMS server also.
    BTW: also device selector in configuration management was just working after rebooting the appliance.
    Steffen

    Developed a working solution for SCP based file exchange with LMS-Linux-Appliance:
    LMS Appliance:
    carshell> shell
    sysadmin # useradd -g casusers -d /home/scp -s /bin/bash -c "SCP user for file transfer from and to LMS" scp
    sysadmin # passwd scp
    sysadmin # ...
    WinSCP-Settings:
    1. create a new profile with the LMS-IP and scp user
    2. force SCP as transport. In SSH version-2, SFTP is the standard scp transport. So you will need a combination of version 2 and SCP, because SFTP is not installed at the LMS linux appliance.
    The reason for the need of an extra user is: SCP transport needs a shell and carshell is not a proper shell to handle SCP commands beside Default Shell enforcement doesnt work with WinSCP.
    3. optional: preset remote dir: /var/adm/CSCOpx/files/rme/dcma/shadow
    Steffen

Maybe you are looking for

  • Problem in the local file download by gui_download,pls help!

    hello,everyone, when I use 'GUI_DOWNLOAD' to download file to my pc,the data in the file has some display problem,eg:'440006114002084000 'displayed as 4.40006E+17 when I enlarge the excel grid,then the  '4.40006E+17 ' just not change to 4400061140020

  • Bug in iPod.app on iPhone?

    Since updating to 3.0, some of my MP3 files, like "What if" from Coldplay's X&Y, start playing at around 60% of the total track time when i click begin. "What if" and "White Shadows" start at exactly 3:17 and 3:19, respectively. But the rest of the a

  • How can i paste text from Numbers too Pages without getting the box/frames?

    I have a big list in numbers with a lot of text in each line. I need to copy/paste it in to a pages document but i don't want the frames to come along.

  • So I went to install the latest Mac update but now it won't turn back on

    I Pressed the restart now button to install the latest update, the computer restarted then went to the apple logo with a progres bar. It went along for a few moments then just shut down. I tried to restart again but it just went back to the progress

  • Nokia E6 - missed calls, new SMS

    Hi! One question about missed calls, new SMS... Is it normal, after I get new SMS and missed call I can't see that on my screen. I use default Screen saver (Big clock and I have to push "middle" button to see notification about SMS/call. I even don't