LMS Prime: After adding a new Certificate LMS Services not starting

Hello,
we changed the LMS from a self signed certificate to a certificate issued from our corporate ca. Since about 30 services could start anymore. We are using LMS 4.1 on a Soft Appliance.
I verified the certifcate with the SSLUtil and everything looked just fine.
Any ideas?
Affected are following services.
ANIServer
ChangeAudit
CMFOGSServer
ConfigMgmtServer
ConfigUtilityService
CSDiscovery
CTMJrmServer
DCRDevicePoll
DFMOGSServer
EngergyWise
EssentialDM
FDRewinder
FHPurgeTask
ICServer
Interactor
Interactor1
InventoryCollector
InventoryCollector1
IPMOGSServer
IPMProcess
NOSServer
PMCOGSServer
PTMServer
SyslogAnalyser
TISServer
UPMProcess
UTMajorAcquisistion
VNMServer
WiseUHIC
Regards
Alex

I enabled debugging for the dcr server and i found in the daemons.log this entries.
In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : ur
n "ogs_server_urn" : Not found !!
27/Sep/2011 17:01:27:152 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
27/Sep/2011 17:01:27:152 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
27/Sep/2011 17:01:27:152 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
In EPMOgsAdapter:since isOGSup is not true
In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : ur
n "ogs_server_urn" : Not found !!
Does anybody knows what the OGSServer is?

Similar Messages

Login error in Portal after importing a new certificate into BI

Hi Experts,
Our certificate in BI expired last month and we were unable to login to the BEx reports due to this.
I have created a new certificate using Visual Administrator and imported that certificate into BI using STRUSTSSO2 after deleting the old certificate from the system PSE.
After which I have added this new certificate to the ACL for Single Sign On.
Then rebooted the JAVA stack for the changes to take effect.
Now, when I want to login to view reports on the Portal created by BEx Analyzer, I am getting this RFC_ERROR_LOGON_FAILURE exception.
When checked in SM50, it shows SsfVerify failed and SSF_API_NOCERTIFICATE errors.
Please help me out resolving this. Did I miss out on any of the steps?
Also when I ran the report, RSPOR_SETUP, the step 5 shows SID_certificate.crt is not existing and the step 12 shows that BI certificate not imported, SAP BI User is not mapped to SAP EP User.
Regards,

Hi,
Have a look at this [thread|The URL http://xxx was not called due to an error; as well as the [Wiki Link|http://wiki.sdn.sap.com/wiki/display/BSP/Logon].
Hope this will be helpful for you.
Regards,
Varadharajan M

What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Logical standby issue after adding a new user at production db server

Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
Achyot

Please let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu

.xml get disformatted after adding a new Element

Dear friends!
I have a xml file when i add a new element to this its formatting
get destroyrd. Plz help me to keep them in proper shape.
before adding:
<person>
<name>xyz</name>
</person>
after adding a new name element:
<person><name>xyz</name> <name>new 1</name><person>

ok, so using JAXP (which is embedded in JDK 1.4 so if you use this JDK no need to add anything on your classpath).
0. few imports
import org.w3c.dom.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;1.load the XML file in a DOM:
Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse("c:/data/myxmlfile.xml");2. manipulate the DOM, see:
http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPDOM7.html#65002
3. save the DOM:
Transformer transformer = TransformerFactory.newInstance().newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "1");
transformer.transform(new DOMSource(doc), new StreamResult(new FileOutputStream("c:/data/myxmlfile.xml")));hope it helps.

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
iTunes will not start or run unless the old hard drive is plugged in.
If I disconnect the old drive iTunes shuts down.
Any ideas. ??

Hello kskip,
Thank you for providing so much information about what is going on. It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive. You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
Thanks

Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

App Rejection: After purchasing the subscription the magazine does not start to download.

Hi Everyone,
My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
Can anyone see what I might be doing wrong? Is there something I have missed?
I appreciate your help.

@FLTAron, were you able to resolve your issue, 'cause I am facing exactly same issue

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

Unexpected error durung process after adding a new measure group

I add a new measure group with distinct count in my cube
I process my cube then I have:
Erreur interne : Une erreur inattendue s'est produite. Erreurs dans le moteur de stockage OLAP : Une erreur s'est produite lors du traitement de la partition 'Requirement' du groupe de mesures 'Formalized 1' pour le cube 'Requirements_view' à partir de la
base de données SeikoCube. (internal error : unexpected error happens ... An error occured when processing the partition for measure group for the cube)
If I delete this measure, it works well.
Whap happens ? How could I resolve it ?
Thanks in advance

Hi Fiacre663,
According to your description, you encounter the error while processing the cube after added the distinct count to cube, right? In your scenario, which process option are you used to process the cube?
Generally, if you add a measure you are changing the structure of the cube which will invalidate the cube, the easiest way to get the cube "fully operational" again would be to do a ProcessFull. The same thing applies when removing a measure.
Besides, please ensure that the steps to add distinct count are correct. There are different options for creating a distinct count measure in SSAS. Please refer to the link below to see the details.
http://www.mssqltips.com/sqlservertip/3043/different-options-for-creating-a-distinct-count-measure-in-ssas/
Regards,
Charlie Liao
TechNet Community Support

IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command

Hi community,
I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
So i had to manually create the boot entry using bcfg command in an efi shell:
https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.

At least I now know what the problem is:
It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
As I already have 7 boot entries:
adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
Best regards.

LMS Prime: After adding a new Certificate LMS Services not starting

Similar Messages

Maybe you are looking for