LMS Prime Java Patches

Does anyone know if there are plans to develop a LMS Prime 4.2 software patch    for   the recent  Java  client updates? Not surprisingly our Topoogy Services feature doesn't work  with client side Java patches applied   

Hi Bryan,
Uninstall Java from your client machine, Launch topology on the client machine and let LMS decide the best version. It would choose the version as suggested by Afroj and then hopefully you would be able to launch topology at your client site.
Get back in case you still are facing problems.
Regards,
Syed Khalid

Similar Messages

  • JSPM Error while applying As Java Patch to PI 7.1

    Dear All
    I am facing an issue when trying to patch new Pi 7.1 Ehp1 Java patch through JSPM
    steps i did
    . since the download manger is not working for us i click on the link and down load all the patches to windows machine ( Installed machine is AIX)
    all the patches were downloded in SCA.zip " LMNWATOOLS04_0-20003137.SCA.zip" format which is not recognizable through JSPM
    i rename all the file taking off zip extension "LMNWATOOLS04_0-20003137.SCA" , but now the initiating is working but it throws an error saying to revise all the selected patches?
    " Error occured, while reading refactoring configuration from SDU file /usr/sap/trans/EPS/in/ESREGBASIC04_0-20003135.SCA. java.io.IOException: java.io.IOException: "
    how can i deploy these patches comes with SCA.zip format ? i know only SCA  can be deployed , but since i have downloaded them directly it converted to SCA.zip
    please advice me  how to resoleve this urgently
    appreciate your coperation with regard to this
    Buddhike

    > how can i deploy these patches comes with SCA.zip format ? i know only SCA  can be deployed , but since i have downloaded them directly it converted to SCA.zip
    It is fine just to delete the .zip at the end. The issue has another reason.
    Have you patched the JSPM before you applied the patches?

  • Issue with Default Variable in WAD after Java Patch 7.01.7.31

    Hello all,
    I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
    The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute  through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
    This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
    Has anyone ran into this? I've searched and have not found any notes as of yet.
    Thank you,
    -Andy

    Dear Andy,
    Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
    Close this thread once you get a solution.
    Regards.
    Den

  • JAVA Patches not deployed properly-System restore back

    Hi Experts! recently we had deployed JAVA patches on EP development box but we are facing lot of problems with functionality and etc.Before going to deployment,we took backup for file system as well database.So we are planning to restore it back.My doubt is...Could I need to restore only DATABASE  (/usr/sap/sid) or need to restore FILE SYSTEM (OR) Both? Please provide me solution urgently and which path i should follow to retore at file system level?
    Thanks,

    Hi,
    You have to restre both (application + database). If you have taken offline backup then you restore as it is and try again.
    Anil

  • Installed the Java patch for MAC yesterday and immediately could not get adobe reader to show pdf files...have troubleshot and can't seem to remedy ...ideas?

    I have used the Firefox troubleshooting guides, no good. The Java patch is enabled and shows when I check applications. However when I run Firefox plugins it still shows the java plug in is outdated and need to be updated immediately.

    OK, I went to the Firefox knowledge base article you cited and followed the directions with the exception that in the drop down menu I choose Adobe Reader for PDF files rather than the plug in default that apparently was set by the Java patch. Problem solved !!!!!!! Thank you so much for taking the time to get me back to the basic place I needed to be to correct this issue. YOU ROCK!!!!

  • Query Functionalities affected after Java patch application 20

    Hi ,
    We applied Java Patch 20 to our Development System.After this application we are getting Error in running the Bookmarks,error while creating complex formula and the functionalities like Back to Start,Back one Navigational Step are not working properly in BI 7.0 Queries.
    Thanks & Regards,
    Jackie

    We have run with this patch for a long time now and have never encountered an issue like this.
    Are you using JInitiator or the Java Plugin (recommended)?
    Have you tried clearing the JAR cache on the client? Your FMB's also might be corrupted somehow - have you tried rebuilding them on a Developer Suite with the exact same patch level as the Application Server?
    You could also try the new super-merge patch 7703734, which supersedes the previous super-merge 7482020, and see if that helps in any way.
    If that doesn't help, you should log an SR on Metalink and get Support to help you solving this.
    Hope this helps,
    Jacob

  • After Java patch 1.7.0_07 ENable applet plug-in and Web start checkbox is gone!

    Hello all,
    Using ML 10.8.1 and Safair 6.0
    After Java patch 1.7.0_07 ENable applet plug-in and Web start checkbox is gone! The check box to enable Safari to load Java pages is 100% gone, missing, just not there anymore.
    When I go to the Java test page it shows that I have Java 7 loaded. Has anyone else run into this problem or have a solution to enable true load loading in Safari and bring back the Enable applet plug-in and Web Start application check box in ML...
    Thanks

    I found out something very interesting. I noticed that another page would show up for less than have a second before the ML Java Preference would show up. I did a video recording of this and moved frame by frame. I show that the page / pane showing up had the following option:
                    Run applets:  in their own process
                                         within their browser process
    Both boxes for the two are unchecked.
    Then this page would disappear and nother would show up without the option / check box
    Enable applet plugin and Web Start applications
    Strange

  • Cisco Prime Infrastructure patch 2.1.1 - HA issue

    Hello,
    I have a problem with the Cisco Prime Infrastructure patched to version 2.1.1. I did exactly what Installation Guidelines say:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1-1/release/notes/cpi_rn.html
    – Install the Prime Infrastructure 2.1.1 patch by using the Administration > Software Updates page on the primary server.
    – Restart the primary server.
    – Verify that the patch installation is complete. If you find the installation complete, decommission and reinstall the secondary server and add it back to the primary server.
    I reinstalled HA server and I'm trying to add it to HA but I get "Failed to authenticate - Primary(xx.xx.xx.xx) and Secondary(xx.xx.xx.xy) PI version does not match"
    Can you help me with that? What I'm doing wrong? or maybe this patch is not prepared to work in HA mode?
    Regards

    Symptom:
    The installation instructions of PI 2.1.1 patch in a High Availability environment are not accurate and following these steps will result in the inability to re-pair the Primary and Secondary servers.
    Conditions:
    If the instructions are followed, then when the user attempts to re-pair the servers, an error will be encountered:
    "High Availability Registration Failed - Failed to authenticate - Primary (x.x.x.1) and Secondary (x.x.x.2) PI version does not match".
    Instead, the following steps have proved to work correctly:
    1. Upload and install patch on primary.
    2. Upload and install patch on secondary.
    3. Stop NCS services on secondary
    4. Stop NCS services on primary
    5. Start services on secondary
    6. Start services on primary
    7. Re-pair HA servers from primary
    Workaround:
    Workaround 1:
    On the secondary, go under root and issue:
    # cd /opt/CSCOlumos/bin/
    # ./hamode.sh primary
    Answer 'yes' when prompted.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    When the services are back up, login to the secondary GUI as you would login to a primary server
    Go under Administration > Software update, upload the patch and install it.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    When the services are up, go under root and issue:
    # cd /opt/CSCOlumos/bin/
    # ./hamode.sh secondary
    Answer 'yes' when prompted.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    After the message that services started successfully on the secondary, initiate a new High Availability configuration from the primary. Now the synchronization between the two servers should succeed.
    Workaround 2:
    Redeploy or reinstall the Primary server, restore the backup which was taken prior to applying the patch, reconfigure the High Availability and continue with the steps described in the Conditions section.
    Further Problem Description:
    Release Notes have been updated with more precise instructions.
    Known Affected Releases:
    (1)
    2.1(0.0.85)

  • JAVA PATCH LEVEL

    Hi Experts,
    I need small information on JAVA Patch level.
    Presently we are on Patch level 15 in portal system and latest patch available in market place is 19.
    Please guide me which patch level can i go and apply.
    Regards
    Jan

    The best practice is to go with one step lesser than the highest patch available, because to get the fiexes to the problems with the highest patch will take some time and the 18 patch should have got the fixes by the time highest patch is released. and also you might get the possible issue with the patch 18 from the people who already adopted it or from the market place (you can get the report on impacts ) before proceeding to apply. The other point you need to consider is the patch 19 functionality and its immediate applicability as per your scenario.
    Thank you,
    Shyam

  • JSPM ERROR- cannot add JAVA patches to deploy queue via JSPM

    Hi Experts! Last two days I have deployed java patches(SP13 to SP18).......almost finished......i have to deploy 2 more components only but suddenly i got error.now i cannot add java patches to JSPM deployment queue. am getting error '/usr/sap/BWP/DVEBMGS10/j2ee/JSPM/log/log_2009_07_22_23_41_20/JSPM_MAIN_1_01.LOG.' I have checked trouble ticket log and i have followed Snote-1329945 and changed instace.properties files  as instance.runmode=normal and just restarted java via SMICM only (server reboot is not possible in my environment)
    Trouble Ticket Report----
    Java Support Package Manager for SAP NetWeaver'04s
    SID................: BWP
    Hostname...........: abcbwp02
    Install directory..: /usr/sap/BWP
    Database...........: DB2/AIX64
    Operating System...: $(/J2EE/StandardSystem/CentralInstance/J2EEEngineInstanceHost/OpSysType)
    JDK version........: 1.4.2 IBM Corporation
    JSPM version.......: 7.00.18.1.01
    System release.....: 700
    ABAP stack present.: true
    The execution ended in error.
    Cannot initialize application data.
    Error while detecting start profile for instance with ID _s.
    More information can be found in the log file /usr/sap/BWP/DVEBMGS10/j2ee/JSPM/log/log_2009_07_22_23_41_20/JSPM_MAIN_1_01.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.jspm.phases.PhaseTypeJSPM/com.sap.sdt.jspm.gui.JspmUiException/Cannot initialize application data/JSPM_MAIN
    JSPMPhases/Java Support Package Manager
    log_2009_07_22_23_41_20 exception:
    #1.5 #C000C0A8D28F0000000000366BD46BD400046F4D35AF2008#1248277310677#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:795)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:795)#Java###Duration: .#1#0:00:10.915#
    #1.5 #C000C0A8D28F0000000000376BD46BD400046F4D35AF2008#1248277310677#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_MAIN##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#Java###Phase status is .#1#error#
    Thanks.

    Hi,
    ABAP stack present.: true
    The execution ended in error.
    Cannot initialize application data.
    Error while detecting start profile for instance with ID _s.
    Looks like the problem is above 1
    Do the following. This should resolve the issues.
    1. If your dialog instance are also having the Java stack then do one thing move your profile folder to some other name and create a new profile folder with the name "profile".
    Copy only the central instance profiles Default, Instance and start profile.
    Then give a try.
    2. If you do not have the java instance in Dialog instance still do the same thing what I have described. move the current profile folder and create the new folder with the name "profile" and copy the profiles Default, Instance and start profile.
    Chances are the JSPM is reading some other profile while starting the JSPM.
    Regards,
    Ravi

  • LMS PRIME 4.2 integrating with ACS 4.2

    Hello,
    i would like to integrate new lms prime 4.2 with acs.4.2 . .. !!
    is there document or user guide for this version of lms?
    Thanks in advance.
    Marwan

    IN LMS 4.2 there is nothing which is known as Integration (like LMS 3.x), since it added feature RBAC.
    Now ACS can just be used as PAM to have ciscoworks authenticated for Tacacs+ or Radius. After the auth is done, you should have a authorization set in LMS locally for user, else it will be given a default HELP DESK access.
    For more details check :
    Authentication Using Login Modules - Overview
    -Thanks

  • How to revert back the Java patch Upgrde

    Hi,
        I did the Java patch upgrade from 7.00.13.0 to 7.00.22.0 .
        But I want to revert back few components to the older version .Is it possible?
         Thanks in advance ..

    Hi,
    doing an upgrade is a one way. About "revert back few components"
    In theory you would start with SP13 and only install the SP22 version of what you want to upgrade, but: That's not a good idea. Depending on what you want to keep at SP13, SP22 won't work.
    br,
    Tobias

  • I have creative suite 5.5 and have recently updated my iMac to Yosemite. Now I can't open the adobe apps. I have done the suggested Java update and mac OS X Java patch update.. still no go. Can you HELP?

    I have creative suite 5.5 and have recently updated my iMac to Yosemite. Now I can't open the adobe apps. I have done the suggested Java update and mac OS X Java patch update.. still no go. Can you HELP?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) the install using the installation files.  do not migrate adobe programs.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • What level of Java patch should be applied With ABAP patch level 19

    Hi All,
    I have a newly installed Netweaver 2004 s XI system. the support pack level is
    SAP_ABA         0019
    SAP_BASIS      0019
    PI_BASIS          0019
    ST-PI                 0016
    SAP_BW           0019
    ST-A/PI             0000
    What should be the level for Java package and JSPM should be applied. Can we apply level 17 or should ABAP and JAVA be of the same level??
    Regards,
    Priya

    HI,
    Actually now my Java version and all java patches are on the level 19. But my IGS is on level 13. The highest level available is also only 16. So do i need to upgrade my IGS as it will require kernel upgrade or level 13 is ok?
    Regards,
    Priya

  • LMS Prime 4.2 Soft Appliance on UCS

    Hi,
    I'm trying to install LMS Prime 4.2 Soft Appliance on UCS C220 M3 with RAID controller . I have configured RAID 1 and using
    Cisco_Prime_LAN_Management_Solution_4_2.iso, but when i boot from KVM DVD I received this error:
    Do you have any ideas how to process from here?
    Thanks in advance
    Regards

    Sorry, NCS server (PRIME-NCS-APL-K9) was the option I was referring to. I didn't realize they specified the same image for UCS servers.
    I do note that the prerequisites specify (here) "LMS 4.2 is supported on the UCS B-series blade servers (B200-M1 or M2 and B250-M1 or M2) and C-series rack mount servers (C200-M1 or M2, C210-M1 or M2, C250-M1 or M2, and UCS C460)". It could be that the ISO does not have the necessary drivers for your RAID controller in the M3.

Maybe you are looking for