LMS3.1 psu problem - Consistency check failed for base package ...AG
Hello,
We've got a package updater problem with a LMS3.1 installation.
1. After trying to update RME Device packages from GUI we got a message that LibCommon-v2.3.2 is needed
2. We tried to update LibCommon from CLI using psucli.bat, see below
3. We found a discussion in this forum, simular to this problem with the hint to reinstall the RME, what we did but with no improvement
4. We deinstalled, reboot, did a new installation of LMS3.1. But the problem still exists, with same message. We need the PSU, because most of our devices will be managed after device package update only.
Updating of each package brings warnings with pseudo package names, as ImageAG, MemoryAG and not with hints to real missing packages:
C:\lms\bin>psucli -p rme -install -src C:\install\lm31-updates\ LibCommon
WARNING: LibCommon(2.3.2):Consistency check failed for base package ImageAG
see also the psu.log containing all tryes of package updates
The problem goes a little bit in this direction, but with a new reinstallation as well:
https://supportforums.cisco.com/message/669047#669047
What can we do?
thx for hints, Steffen
When you install LMS on Windows, there are some recommended steps to take to ensure the installation is a problem free as possible:
Set the per-user and global TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP)
Disable all anti-virus software
Disable Windows Data Execution Protection (DEP)
Login to the server as a local Adminitrator
Install from original, locally attached media
NEVER abort the installation after the installer says not to
Based on the symptoms described here, I'm guessing at least the first item was not done. TAC has a procedure to recover a bad RME package repository, but if the base installation is problematic, doing so would be moot. If you suspect the installation isn't 100% (beyond the package repository), uninstall, then follow the above steps to reinstall.
If you think the problem is just with the RME package repository, contact TAC, and they can provide you a good, up-to-date repository to jump start things for you.
Similar Messages
-
LMS3.1 psu problem - Consistency check failed for base package
Hi all,
I tried to install the following packges for CiscoView 6.1.9:
Rtr2900.cv50.v2-0.zip
Rtr3900.cv50.v2-0.zip
but it gives me the following error:
Consistency check failed for base package NGMARShare
There are no Packages to be installed.
I uninstalled all packages and installed them again after I copied these two packages in the packages sources folder but it failed again.
Any one can help?
Thanksthe new package you try to install depends on a package that you don't have
DEPENDENT PACKAGE
=================
DtShare V1.5 (DtShare.cv50.v1-5.zip)
this can be seen from the error message you got
"Consistency check failed for base package DtShare"
my advice is to read the "Release Information" for the packages you try to install
you can find the Release Information in the same page of the download.
hope this helps,
also it's better to update all the device packages if your server have internet connectivity from CS > Software Center > device update. -
Hi Guys,
I'm having some issues updating the device packages for my RME 4.3.1 install.
I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
I pulled up the PSU.log and found the following:
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CM already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : _CURDFMVER=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : DFMVERSION=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageManager : installPackages] : Locking package repository..
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageInstaller : installStep_resolve] : Checking Dependencies...
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : pickUnselectedBasePackages] : SharedSwim2900XL has 17 dependent packages
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageParserAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedDcmaIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[DistributionAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibSwim] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibSwim
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimJobOptionsAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SoftwareAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ConfigAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibCommon] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibCommon
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SystemAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageListAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ContainmentAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[FlashAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[MemoryAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[RemoteStageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimCCOAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedSwimIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedSwimIOS
[ Thu May 27 10:11:50 PDT 2010 ] WARN [PsuPkgResolver : pickLatest] : No packages to pick ..Empty package set passed .
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : populateResolverResult] : All selected packages failed consistency check..
[ Thu May 27 10:11:50 PDT 2010 ] INFO [SimpleProgress : progressInfo] : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageInstaller : installStep_resolve] : Packages selected for install (satisfies consistency check) : []
[ Thu May 27 10:11:50 PDT 2010 ] INFO [SimpleProgress : progressInfo] : Progress: No packages to be installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageManager : installPackages] : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:31 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:44 PDT 2010 ] INFO [PackageManager : installPackages] : Releasing lock...
[ Thu May 27 10:13:44 PDT 2010 ] INFO [DeviceSupportHistory : init] : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
[ Thu May 27 10:13:44 PDT 2010 ] INFO [DeviceSupportHistory : init] : Number of Events Loaded in init()6
Before i started to bug TAC, I figured I'd post this here.
Let me know your thoughtsLooks like your package repository has been corrupted. TAC can provide a procedure to recover from this corruption. The following DOC indicates why this can happen and has suggestions on how to avoid these problems from re-occuring.
-
Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event> -
How to resolve "Performance counter registry hive consistency check" failed?
I want to install SQL Server 2008 November CTP Developer Enu. When "System Configuration Check" it shows:
Rule "Performance counter registry hive consistency check" failed.
The performance counter registry hive is corrupted.
And cannot continue installing. How to solve this problem?I've actually solved the problem for my Vista and Win 7 (traditional chinese version).
After revising %systemroot%\system32\WmiApRpl.ini:
"[info]
drivername=WmiApRpl
symbolfile=WmiApRpl.h
[languages]
004=Chinese (Traditional)
009=English
[objects]
WMI_Objects_004_NAME=WMI Objects
WMI_Objects_009_NAME=WMI Objects
MSiSCSI_ConnectionStatistics_00000_004_NAME=iSCSI Connections
MSiSCSI_ConnectionStatistics_00000_009_NAME=MSiSCSI_ConnectionStatistics
MSiSCSI_InitiatorInstanceStatistics_00001_004_NAME=iSCSI Initiator Instance
MSiSCSI_InitiatorInstanceStatistics_00001_009_NAME=MSiSCSI_InitiatorInstanceStatistics
MSiSCSI_InitiatorLoginStatistics_00002_004_NAME=iSCSI Initiator Login statistics
MSiSCSI_InitiatorLoginStatistics_00002_009_NAME=MSiSCSI_InitiatorLoginStatistics
MSiSCSI_MMIPSECStats_00003_004_NAME=iSCSI HBA Main Mode IPSEC Statistics
MSiSCSI_MMIPSECStats_00003_009_NAME=MSiSCSI_MMIPSECStats
MSiSCSI_NICPerformance_00004_004_NAME=MSiSCSI_NICPerformance
MSiSCSI_NICPerformance_00004_009_NAME=MSiSCSI_NICPerformance
MSiSCSI_QMIPSECStats_00005_004_NAME=iSCSI HBA Quick Mode IPSEC Statistics
MSiSCSI_QMIPSECStats_00005_009_NAME=MSiSCSI_QMIPSECStats
MSiSCSI_RequestTimeStatistics_00006_004_NAME=iSCSI Request Processing Time
MSiSCSI_RequestTimeStatistics_00006_009_NAME=MSiSCSI_RequestTimeStatistics
MSiSCSI_SessionStatistics_00007_004_NAME=iSCSI Sessions
MSiSCSI_SessionStatistics_00007_009_NAME=MSiSCSI_SessionStatistics
ProcessorPerformance_00008_004_NAME=處理器效能
ProcessorPerformance_00008_009_NAME=ProcessorPerformance
Video_Scheduler_Statistics_00009_004_NAME=Video Scheduler
Video_Scheduler_Statistics_00009_009_NAME=Video_Scheduler_Statistics"
I have realized that the code 009 is for english language and 004 for chinese traditional and in my "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Perflib" did only exist 009 and 0404 key.
Hence, i've created a new 004 key and copied 009 counter and help contents to this newly created key.
Without restarting the OS, I was able to install smoothly MS SQL server express RC2.
I'm so happy to have overcome this problem.
But just out of curiosity does anyone know the syntax for the language codes? (009 for English, 004 for Chinese and 0404? -
I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate DimensionHi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Result: User equivalence check failed for user "oracle".
While installing on Solaris-10, ssh, rlogin, scp works fine.
Running runcluvfy.sh stage -post hwos -n rac-1,rac-2 -verbose returns the above error.
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
/bin/ssh & /bin/scp is in use.Hello,
I am facing User equivalence check failed for user "oracle" error on my newly to be built RAC cluster.
The Oracle users have been created identically and ssh have been setup as per RAC installation manual.
Still I am facing the below problem. Please help me out
Node1 > uname -a
Linux purple-rac-node2 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Node2 > uname -a
Linux purple-rac-node1 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
clusterware/cluvfy/runcluvfy.sh stage -post hwos -n purple-rac-node1,purple-rac-node2 -verbose
Performing post-checks for hardware and operating system setup
Checking node reachability...
Check: Node reachability from node "purple-rac-node1"
Destination Node Reachable?
purple-rac-node2 yes
purple-rac-node1 yes
Result: Node reachability check passed from node "purple-rac-node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
purple-rac-node2 failed
purple-rac-node1 failed
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
[oracle@purple-rac-node1 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)
[oracle@purple-rac-node2 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall) -
PRVF-4007 : User equivalence check failed for user "grid"
Oracle Version 11.2.0.3.0 patched to 11.2.0.3.1
I had installed GIU and RAC db on 2 node cluster
but since yesterdy has this issue when running the commands
[grid@vmorarac2 ~]$ cluvfy comp ocr -n all -verbose
Verifying OCR integrity
ERROR:
PRVF-4008 : User equivalence unavailable on all the specified nodes
Verification cannot proceed
vmorarac1 and vmorarac2 r the two nodes
as a grid user, from vmorarac1 i ran ssh vmorarac2 and it failed with above error and vice versa
so i did the following
from vmorarac1
ssh vmorarac2
yes and enter key
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
i did the same on other node
but the problem still exists.
Edited by: 912919 on 23-May-2012 06:58Hi,
The subject of thread "*PRVF-4007 : User equivalence check failed for user "grid*"
Now..
{code}
PRVF-4657 : Name resolution setup check for "vmorarac-scan.pbi.global.pvt" (IP address: 152.144.199.201) failed
PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
{code}
If you can see are different issue.
If you are using DSN to resolve hostname "vmorarac-scan.pbi.global.pvt" check with "nslookup" if the name is resolved correctly.
If you are using Hosts File to resolve hostname "vmorarac-scan.pbi.global.pvt" you must configure only one ip (152.144.199.201) to resolve "vmorarac-scan.pbi.global.pvt" this entrie must be on host file of all nodes of cluster.
Levi Pereira -
User equivalence check failed for user "oracle".
Hi,
I am trying to install the Oracle Clusterware 10g as part of my RAC setup.
I have configured RHEL 4 in 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the below error:
[oracle@rac cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n rac,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
rac
WARNING:
User equivalence is not set for nodes:
rac
Verification will proceed with nodes:
rac2
The problem is only with the first node(rac). The second node passes succesfully.
ssh works fine. Not sure what is wrong!
Thanks!Did you do Configure SSH for User Equivalence ?
Or
Did you Establish User Equivalence ?
If yes.. please check...
$ ssh rac hostname
rac
$ ssh rac2 hostname
rac2
You should Establish User Equivalence before...
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
If You don't configure ssh for user equivalence
http://www.oracle.com/technology/pub/articles/smiley_rac10g_install.html
Or
read SSH User equivalence is not set up on the remote nodes -
Cluvfy : Time zone consistency check failed
Hello All,
Env: 112.0.3 on Linux 5.8
Single node RAC
I 'am trying to add another node to my cluster.
When i run the cluvfy it shows
cluvfy stage -pre nodeadd -n a0002 -fixup -verbose
o/p trimmed
Oracle Cluster Voting Disk configuration check passed
Check: Time zone consistency
Result: Time zone consistency check failed
The `date` on both the servers shows UTC as the timezone and they sync
a0001:oracle(ps1) ~ % ssh a0002 date;date
Thu Oct 3 06:28:13 UTC 2013
Thu Oct 3 06:28:13 UTC 2013
cat /u01/app/11.2.0/grid/crs/install/s_crsconfig_a0001_env.txt
TZ=UTC
NLS_LANG=AMERICAN_AMERICA.AL32UTF8
TNS_ADMIN=
ORACLE_BASE=
Where does the script check for this?
TIA,
JohnThx Anar for stepping by..
rm -rf /tmp/cvutrace
mkdir /tmp/cvutrace
export CV_TRACELOC=/tmp/cvutrace
export SRVM_TRACE=true
export SRVM_TRACE_LEVEL=1
<STAGE_AREA>/runcluvfy.sh stage -pre crsinst -n <node1>,<node2> -verbose
i enabled tracing on cluvfy and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.
and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good. -
Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3
Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejithWelcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini -
Fileserver consistency checks failing 0x809909B0
I have a file server with approx. 1.7TB of files which became inconsistent on the 8<sup>th</sup> of November, and has been unable to complete a consistency check since then.
Consistency checks fail with the error:
The protection agent on <server> was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
I have removed and re-added the server, including deleting the protected data from DPM disk, and reinstalled the DPM agent on the file server, but I still receive the above error when consistency checking.
DPM is System Center 2012 R2 v4.2.1254.0 on Windows Server 2012 R2.
The file server is running Windows Server 2012 R2 also.
KB2919355 is installed on both systems.
I did have Dedup running on the file server, but have un-deduped the drive as part of troubleshooting this issue.
Other servers backed up by this DPM server are being backed up fine, including a HyperV cluster, 2 exchange servers and 2 sharepoint farms.
There are a large number of these errors in the DPMRA log around the time the job fails:
5288 4F48
11/28 22:49:56.601
29
radefaultsubtask.cpp(355)
[00000000013EE9D0] 50C1500F-0353-4D2A-8188-FC03612E2503
WARNING
Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {EB6F4726-E5C5-4958-B034-542518E5A931}
5288 4F48
11/28 22:49:56.601
05
defaultsubtask.cpp(546)
[00000000013EE9D0] 50C1500F-0353-4D2A-8188-FC03612E2503
WARNING
Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand, pOvl)
5288 4F48
11/28 22:49:56.601
05
defaultsubtask.cpp(751)
[00000000013EE9D0] 50C1500F-0353-4D2A-8188-FC03612E2503
WARNING
Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
5288 4F48
11/28 22:50:03.635
03
runtime.cpp(1376)
[00000000012F4850] 50C1500F-0353-4D2A-8188-FC03612E2503
FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
5288 4F48
11/28 22:50:03.635
03
runtime.cpp(1376)
[00000000012F4850] 50C1500F-0353-4D2A-8188-FC03612E2503
FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RACancelAllSubTasks" CommandInstanceID="8a514c9b-6a62-42b4-a03b-0f938e3f20cc"
GuidWorkItem="eb6f4726-e5c5-4958-b034-542518e5a931" TETaskInstanceID="50c1500f-0353-4d2a-8188-fc03612e2503"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="DPM01.domain.com"/></ErrorInfo></Status>
5288 4F48
11/28 22:50:03.635
03
runtime.cpp(1376)
[00000000012F4850] 50C1500F-0353-4D2A-8188-FC03612E2503
FATAL ]
I have also tried the steps in this article with no change:
https://social.technet.microsoft.com/Forums/en-US/107bdce0-e13c-427a-9341-07d4b558f007/dpmra-crashing-after-update-to-dpm-2012-r2-ur2
Currently I have reduced the amount of shares being backed up to just ~400gb of data and I have it in a consistent state, but I need to get the remainder of the data backed up, and I can’t be in a situation where if it becomes inconsistent it can’t run a
successful consistency check again.Hi,
If you want to pursue this immediately, you can visit the following web site to open a support incident. The charge to your CC will not be processed until your case is resolved and closed, if it's a code defect in the DPM then we wave all charges.
http://support.microsoft.com/select/Default.aspx?target=assistance
In the Quick product finder, enter:System Center 2012 R2 - then select System Center 2012 R2 Data Protection Manager
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
RUNCLUVFY Result: PRVF-4007 : User equivalence check failed for user "orac
hello
try to run runcluvfy.sh I receive the following screen rac2 is passed but rac 1 is failed can sombody help me?
thanks
[oracle@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
rac1
Verification will proceed with nodes:
rac2
Checking node connectivity...Check this older thread which has a lot of information on this:
User equivalence check failed (RAC setup) -
CLUVFY failing with 'User Equivalence check failed for...'
New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
Running the cluster verification utility command:
cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
Verifying system requirement
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
1) RSA keys correctly configured on both nodes and I can ssh between without a password
2) ping ip and private work correctly to and from both nodes.
3) user, group ids are identical on both systems.
I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
Checking node reachability...
Check: Node reachability from node "node-01"
Destination Node Reachable?
node-02 yes
node-01 yes
Result: Node reachability check passed from node "node-01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node-02 passed
node-01 failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
node-01
Verification will proceed with nodes:
node-02
Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.No, no banners. And I followed note 300548.1 to the letter. Several times :-)
However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
According to the documentation:
CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out. -
Result: PRVF-4007 : User equivalence check failed for user "oracle"
Hi
I get below error everytime I run ./cluvfy stage -pre crsinst -n node01,node02 -fixup -verbose > a.log
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node02 passed
node01 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
node01
Verification will proceed with nodes:
node02
node01 is the local node, if I run from node02 It comes back saying the same thing about node2!
I have checked oracle uid and groups all set correctly and ssh working fine ...
I have ran the same command for grid user and getting the same error !!i know what it was, i should have done ssh localnode date for once at least!!
I only did ssh remotenode date :)
Maybe you are looking for
-
In MSS PCR Send button not working
Hi, We are trying to implement ESS/MSS 1.0 SP 8 on EP 7.0 SP 11 and ECC 6.0. We are using the application on https. SSL has been configured and is working fine. We are using PCR under MSS, which also runs on https. SSL for ADS has been configured and
-
IWeb data not reinstalled from TimeMachine Backup
I recently upgraded my hardrive and I am not able to locate any web data created on iweb from my last TimeMachine Backup. I assumed. All of my work would migrate automatically with the migration assistant from the Time Machine backup. Since the iclou
-
RTF files won't open; Icons replaced with dotted rectangles in Finder
Hello all, I am trying to troubleshoot a friend's computer. She uses TextEdit to take notes and saves her files as RTFs. A while ago she complained that one of her textfiles wouldn't open, even though she could see the file in the Open dialog in Text
-
Hello all, I'm trying to find a table with all Infopackage groups, Infopackages in it, all details about the group with its schedule time...etc. Can somebody help me. Regards, -Meps
-
After ios 7 update I can no longer iMessage
After the latest update I can no longer send an iMessage. I have about 6 messages that were undeliverable. I searched the Internet and found many others are having the same issues. I asked my granddaughter to iMessage me from her phone and she said