(lms3.2) Devices discovered but unreachable?

I recently installed lms3.2 to a newly installed cisco network. When I run device discovery, all my cisco devices are displayed as unreachable. What could be causing this issue?
Thanks in advance

Thanks for the reply,
I checked the snmp credentials and they match on both the lms platform and the switches. I could view and configure any devices in the chassis view.
Okay, I re-discovered my core router successfully, and the device as been added to RME devices. But, sys inventory polling and collection jobs are failing, what could cause this issue?
Rod

Similar Messages

Network devices discovered but not managed

SCOM 2012 R2 management group. A dedicated network monitoring resource pool consists of two MSs. These two MSs have been removed from AMSRP and other two default resource pools (AD.., Notification...) - is this correct?
Two discovery roles:
role1 runs on GWS1 discovered (explicitly) 5 devices and shown all "healthy". This rule was using AMSRP to monitor, but changed to the dedicated pool after it was created.
role2 (added after the dedicated resource pool was created) runs on GWS2 discovered (explicitly) 2 devices but shown as "not monitored"
How to find out what's wrong? (log files etc?)
Anything need to check with the resource pool settings?
Thanks.

Hi,
Do you mean that you have discovered the two network devices on your Management server, but it is not monitored.
This issue maybe caused by the proper management pack was imported, please go through the below article to get more information about how to monitor network device by using SCOM:
http://technet.microsoft.com/en-us/library/hh212935.aspx
Network Monitoring using System Center Operations Manager 2012
http://blogs.technet.com/b/rohitkochher/archive/2011/11/26/network-monitoring-using-system-center-operations-manager-2012.aspx
Regards,
Yan Li
Regards, Yan Li

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

Has anyone else found solution to Apple devices not 'seeing' each other on Home Share? I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all. Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
I have already tried the following without success:
1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other: "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

TS1363 Error message for my ipod touch, ipad and Nano. they all say the same thing " there has been a device detected, but cannot be identified properly. please disconnect and re-connect ipod properly". i have done all it asks, and still nothing help.

can anyone help me try to figure out whyall 3 of my devices jsut stopped beign acceptd on my itunes? ipod touch, nano 6th gen and ipad. none of them will be read on my itunes, yes i have uninstalled and re installed my itunes and plugged and unpluggd the devices and i have reset them numerous times. so what next?

Doublechecking. In the course of your troubleshooting to date, have you worked through the following documents?
iPod nano: Error message saying that iPod 'could not be identified properly'
iOS: Device detected but not identified properly on iTunes for Windows

TS1369 itunes no longer sees my devices. But I can still see them in windows. Please help

itunes no longer sees my devices. But I can still see them in windows. Please help

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

How do I sync my Calendar across my MacBook Pro OS X 10.9.5, iPhone iOS 8.1.3 and iPad iOS 8.1.3 ? I Sync my devices regularly, but recently the Calendar updates are not appearing across my devices ?

How do I sync my Calendar across my MacBook Pro OS X 10.9.5, iPhone iOS 8.1.3 and iPad iOS 8.1.3.
I sync my devices regularly, but recently the Calendar is not updating across my devices.

heelp

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

Exactly which password are you inputting? iCloud looks for your AppleID password.

LMS 4 Devices added but not shown in inventory

Hello,
By reruning discovery with new seeds etc I have more devices discovered.
Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
Any help, is welcome.

Hi,
Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
Thanks,
Gaganjeet
Inventory> Job Browsers> Inventory Collection

I sent my device back but got a text message

I sent my device back, but got a text message saying that it was nit received & I may be charged. I have a receipt dated 07/08/2015 with a tracking number.

Hello There
I want to thank you for being diligent with returning the requested equipment!
The text message you received from AT&T is a friendly reminder to return the equipment to avoid a charge.
We definitely recommend any time a customer sends back equipment to hang on to the tracking receipt, which you have. Just keep this tracking receipt for your records, but at this time there seems to be no need for concern.
Thank you,
Charise

(lms3.2) Devices discovered but unreachable?

Similar Messages

Maybe you are looking for