LMS3.2, RME4.3.1, software Repository Synchronization error

Hello,
I've problem with synchronization of Software in RME 4.3.1 (LMS 3.2).
When I click on "finish", creating a synchronizaton job, I'v got a tomcat error (see attachement #3).
I can begin with the GUI, choose source "from Device", select the device, select image from flash, schedule the job "now", see the work order, and then on finish...tomcat error...
Moreover, when I watch settings in "CS/DataCollection Settings/Image Transfer Protocol Order", I have TFTP; NULL, but got the same tomcat error when I want to modify this settings (see attachment #2 and #1)
The TFTP service is running, what can I to verify ?
Please help
thanks a lot
jerome

Hi,
Here the posts after a restart of daemon Manager.
When I go to RME > Admin > Software Mgmt > View/Edit Preferences, I've got a tomcat error (see attachment named RME_edit_settings_error.jpg).
And the diffrents log (NMSROOT/MDC/tomcat/logs/stdout.log et NMSROOT/MDC/tomcat/logs/stderr.log) and the file regdaemon.xml.
Thanks in advance
Jerome

Similar Messages

Software Updates Synchronization, error code 0X80131500

Hello,
I need some help to get the Software Updates Synchronization to work again.
Some days ago the Software Updates Synchronization ended to work, with the error code 0X80131500.
(I have cleaned out, and now only test with updates for Skype and Windows 8, normally we only use the Software Updates for third-party updates via Secunia CSI)
In SMS_WSUS_SYNC_MANAGER, you will see the following error:
WSUS Synchronization failed.
Message: Failed to sync some of the updates.
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates.
If I check the log wsyncmgr.log, I sees the following:
Wakeup by inbox drop SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:18 10496 (0x2900)
Found local sync request file SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:23 10496 (0x2900)
Starting Sync SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:23 10496 (0x2900)
Performing sync on local request SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:23 10496 (0x2900)
Read SUPs from SCF for stocm.OURDOMAIN.local
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
10496 (0x2900)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:23 10496 (0x2900)
Found active SUP stocm.OURDOMAIN.local from SCF File.
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
10496 (0x2900)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:23.766 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
10496 (0x2900)
Synchronizing WSUS server stocm.OURDOMAIN.local
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
10496 (0x2900)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:25.025 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
10496 (0x2900)
Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
10496 (0x2900)
Synchronizing WSUS server stocm.OURDOMAIN.local ...
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
11696 (0x2DB0)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:25 11696 (0x2DB0)
sync: WSUS synchronizing categories SMS_WSUS_SYNC_MANAGER
2013-07-15 08:31:31 11696 (0x2DB0)
Done synchronizing WSUS Server stocm.OURDOMAIN.local
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
11696 (0x2DB0)
Sleeping 2 more minutes for WSUS server sync results to become available
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
11696 (0x2DB0)
Set content version of update source {A0A0CEF9-7800-4617-A320-D74A9E7BEB37} for site SOP to 589
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10496 (0x2900)
Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10496 (0x2900)
STATMSG: ID=6705 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:34.319 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10496 (0x2900)
Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10496 (0x2900)
Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local ...
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10160 (0x27B0)
sync: Starting SMS database synchronization
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10160 (0x27B0)
requested localization languages: en,sv SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:34 10160 (0x27B0)
Syncing all updates SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:34 10160 (0x27B0)
Requested categories: Product=Windows 8, ProductFamily=Skype, UpdateClassification=Security Updates, UpdateClassification=Update Rollups, UpdateClassification=Service Packs, UpdateClassification=Tools, UpdateClassification=Feature Packs, UpdateClassification=Updates,
UpdateClassification=Definition Updates, UpdateClassification=Critical Updates
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10160 (0x27B0)
sync: SMS synchronizing categories SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:34 10160 (0x27B0)
sync: SMS synchronizing categories, processed 0 out of 214 items (0%)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
10160 (0x27B0)
sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
10160 (0x27B0)
sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
10160 (0x27B0)
sync: SMS synchronizing updates SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:36 10160 (0x27B0)
sync: SMS synchronizing updates, processed 0 out of 32 items (0%)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
10160 (0x27B0)
Synchronizing update 2489efa5-a44c-4157-9f65-db2cc4c272d7 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 (KB2833959)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
10160 (0x27B0)
error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
Request failed.~~System.Security.SecurityException: ~~ at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
demand, IPermission permThatFailed)~~ at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
throwException)~~ at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
pset, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~ at System.Security.CodeAccessSecuri~~
...~~System.TypeInitializationException: ~~ at System.Data.SqlClient.SqlConnection..ctor()~~ at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~ at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~ at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Provider SourceType="default"><Operation
Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
Name="Install"><Content ContentId="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="1"><FileContent Name="windows8-rt-kb2833959-x86.cab" Size="6429955" Signed="true" Hash="A37A1D40B0581FDC6EC0E5FB1DC04EE84AD7FC52"
HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x86_a37a1d40b0581fdc6ec0e5fb1dc04ee84ad7fc52.cab"/></Content><Parameter Name="CommandLine"><Property
Name="CommandLine" Value="/WUSInstaller /UpdateID:6c9323cb-22d6-4bdb-8309-9ed6ded8bce2"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
10160 (0x27B0)
Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
10160 (0x27B0)
Synchronizing update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2832418)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
10160 (0x27B0)
error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
Request failed.~~System.Security.SecurityException: ~~ at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
demand, IPermission permThatFailed)~~ at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
throwException)~~ at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
pset, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~ at System.Security.CodeAccessSecuri~~
...~~System.TypeInitializationException: ~~ at System.Data.SqlClient.SqlConnection..ctor()~~ at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~ at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~ at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Provider SourceType="default"><Operation
Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
Name="Install"><Content ContentId="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="1"><FileContent Name="windows8-rt-kb2832418-x64.cab" Size="6031583" Signed="true" Hash="5527FCE8AC04F289CFBAF42619CA25648577012F"
HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x64_5527fce8ac04f289cfbaf42619ca25648577012f.cab"/></Content><Parameter Name="CommandLine"><Property
Name="CommandLine" Value="/WUSInstaller /UpdateID:0a75ed46-8be8-416d-8899-68dc6aea56e5"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
Synchronizing update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2833959)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
Request failed.~~System.Security.SecurityException: ~~ at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
demand, IPermission permThatFailed)~~ at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
throwException)~~ at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
pset, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~ at System.Security.CodeAccessSecuri~~
...~~System.TypeInitializationException: ~~ at System.Data.SqlClient.SqlConnection..ctor()~~ at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~ at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~ at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Provider SourceType="default"><Operation
Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
Name="Install"><Content ContentId="393a2161-b85d-439e-9038-7fc7befaeed0" Version="1"><FileContent Name="windows8-rt-kb2833959-x64.cab" Size="11789251" Signed="true" Hash="8150A8E8BD5CC80D396C628BD55E94A8BA2DC0B4"
HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x64_8150a8e8bd5cc80d396c628bd55e94a8ba2dc0b4.cab"/></Content><Parameter Name="CommandLine"><Property
Name="CommandLine" Value="/WUSInstaller /UpdateID:393a2161-b85d-439e-9038-7fc7befaeed0"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
Synchronizing update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 x86 (KB2832418)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
10160 (0x27B0)
error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
Request failed.~~System.Security.SecurityException: ~~ at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
demand, IPermission permThatFailed)~~ at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
throwException)~~ at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
pset, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~ at System.Security.CodeAccessSecuri~~
...~~System.TypeInitializationException: ~~ at System.Data.SqlClient.SqlConnection..ctor()~~ at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~ at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~ at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Provider SourceType="default"><Operation
Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
Name="Install"><Content ContentId="0979de90-24e7-46e7-862f-febf7a8a6348" Version="1"><FileContent Name="windows8-rt-kb2832418-x86.cab" Size="4313255" Signed="true" Hash="485B6961AC836D2D6C047D4A63299D98C4B44542"
HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x86_485b6961ac836d2d6c047d4a63299d98c4b44542.cab"/></Content><Parameter Name="CommandLine"><Property
Name="CommandLine" Value="/WUSInstaller /UpdateID:0979de90-24e7-46e7-862f-febf7a8a6348"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
10160 (0x27B0)
Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
10160 (0x27B0)
Synchronizing update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d - Security Update for Microsoft .NET Framework 4.5 on Windows 8 (KB2833958)
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
10160 (0x27B0)
error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
Request failed.~~System.Security.SecurityException: ~~ at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
demand, IPermission permThatFailed)~~ at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
throwException)~~ at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
pset, RuntimeMethodHandleInternal rmh)~~ at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~ at System.Security.CodeAccessSecuri~~
...~~System.TypeInitializationException: ~~ at System.Data.SqlClient.SqlConnection..ctor()~~ at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~ at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~ at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Provider SourceType="default"><Operation
Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
Name="Install"><Content ContentId="a8891461-32fe-450f-8585-1b5ffbd91788" Version="1"><FileContent Name="windows8-rt-kb2833958-x86.cab" Size="7255481" Signed="true" Hash="F88D2B25DC19094E48A3AF0D34202CE6861E4644"
HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833958-x86_f88d2b25dc19094e48a3af0d34202ce6861e4644.cab"/></Content><Parameter Name="CommandLine"><Property
Name="CommandLine" Value="/WUSInstaller /UpdateID:a8891461-32fe-450f-8585-1b5ffbd91788"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Too many consecutive failures. Aborting sync.
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Sync failures summary: SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:49 10160 (0x27B0)
Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10160 (0x27B0)
Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10496 (0x2900)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:49.449 2013 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10496 (0x2900)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:49 10496 (0x2900)
Setting sync alert to active state on site SOP
SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
10496 (0x2900)
Sync time: 0d00h02m25s SMS_WSUS_SYNC_MANAGER
2013-07-15 08:33:49 10496 (0x2900)
Environment:
Windows Server 2008 R2 (fully updated)
System Center Configuration Manager 2012 SP1 CU2
SQL Server 2008 (fully updated)
wsyncmgr.log are here: http://sdrv.ms/1bBxYRj

I observed a similar error in a topology that had a CAS and 2 primary child sites. The CAS seemed to update without issue, but the primary server reported 0X80131500. I was not able to locate the SMSSQLCLR
node in any of the 3 site databases. It appears that some updates worked but at 10% it failed:
In my case, I restarted the child site SUP and forced sync on the CAS again. It seems to be doing better now. This might have just been an intermittent error...
Mike Crowley | MVP
My Blog --
Planet Technologies

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook. But, folders (.PST files) may be renamed and there may be multiple such folders open in Outlook at any time. I have six, none of which is named Outlook. Two of those are archival and four are associated and named for email addresses.The Desktop software should list the pst files checkboxes to indicate whether synchronization should be performed with them.

Well I believe I have figured out the answer to my own question, I ended up having to do a repair installation for Office 2010 and I was able to sync from outlook to the Blackberry.

SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank You

Hi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.:Source(): (null)." when attempting to synchronize organizer data

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.ource(): (null)." when attempting to synchronize organizer data.Can someone help me with this?

Tried clean wipe and reinstall. Immediately after reinstall of DM, in setting up my 9900 "for the first time", I received the following error message...
"Either there is no default email client or the current mail client cannot fulfill the messaging request. Please open Microsoft Outlook and set it as the default mail client."
I opened Outlook 2013 and checked that it was the default mail client. It was already.
After going in and clicking to confirm default email client, I was allowed to proceed to configure organizer sync settings. I configured memo only (one way from device). I then received the same error message that I was receiving (per my original post in the last message). I've previously tried configuring only one type of organizer sync and not one of them completed a successful sync, so it can't be a bad entry in the calendar or contacts. I also tried deleting CICAL entries for all of email addresses other than my primary one. No difference. Also, prior to setup and sync, I confirmed that my 9900 was not on wireless sync.
I was hoping that this was an old issue and I could use one of the old work-arounds, so if anyone has any ideas for something else to try, please let me know.
In the mean time, I have to assume that it's something that's changed with Outlook 2013 (particularly given the new error message I reported above. I hope that someone at RIM is aware of these error messages and is working on a compatibility fix for Office 2013.
Thanks in advance,
Sheldon
Twitter: @sheldonbk
Twitter: @sheldonbk

OWB repository login error

Hi,
While connecting to the OWB design repository from OWB client the following errors are occured. This happens intermittently. Pls suggest how this can be rectified. we are using OWB 10g (10.1) and oracle 10g database.
AP10420:Error Message: Listener refused the connection with the following error
ORA-12516, TNS:listener could not find available handler with matching protocol stack.
followed by the host name and connection string
Regards
Kishan

I'm not sure I can help you, but I have some questions....
Is OWB the only software getting this error message?
If it's not, does this gives you any clue?
When you say interminttently, I understand that sometimes you can connect to database, sometimes don't. Is it true?
Does this happens since you have installed OWB or is it something recent?
Have you asked the DBA if he/she has recently changed something about db configuration? It might be related to dispatchers (multi threaded servers)...
Maybe looking for ORA-12516 in database general forum and you'll find answeres for your question.
Good luck.
Marcos

Synchronization error

Hi
I'm trying to synchronize some music from iTunes, but I get an error:
"BlackBerry Desktop Software received an error whilst transferring media. Check your device and try again"
The device is connected, as I can browse to it.
Any thoughts. I only bought it yesterday, and it has the latest build.
Thanks
Love Me - Love My BlackBerry
Z10 OS Version: 10.0.10.690
Z10 Software Release: 10.10.90
PlayBook - 2.1.0.1526

I hit this RIM bug today as well, here is what I did:
1) Close BBDM and iTunes
2) Connect your PB via USB *or* enable WIFI file sharing and use your IP to connect to your device
Note: If it asks you for a username and password on Windows, the Username: playbook, Password: Your device pwd.
3) Copy the songs you placed on your PlayBook to your PC drive
Note: This seems to happen if you manually copy songs to your device
4) Restart BDM
5) Uncheck all songs under playlists / Artists / Albums and press Sync
Note: It will start removing all your music, thats fine
6) After done, just re-sync using your PlayList.
It should work. My theory (as far as I'm willing to invest one at this point) is that the app freaks out when you have media copied to incorrect folders or the music files are corrupt.
I hope RIM outsources this software
Ed.

ActiveSync reporting generic "Synchronization error", anyone have any ideas?

I am using my Treo 700wx on my Windows XP Home desktop computer, and have in the past been able to sync with Outlook 2003. My wife recently purchased a new windows mobile smartphone and began using ActiveSync under her computer profile, and since then ActiveSync reports a generic "Synchronization error" message in the Activesync window when I place my Treo in the USB cradle. It does indicate that I am connected just fine. I redownloaded the most recent ActiveSync files from Microsoft (4.5.0) and used the repair option without success. I also upgraded my Treo Phone software to v. 1.22 - VZW also without any change in my ability to sync my data. Does anyone have any suggestions as to the next step?
Thanks.
Post relates to: Treo 700wx (Verizon)

I have only seen a generic syncrhronization error when trying to do remote synchronization, so pretty much sounds like your device is trying to sync to a diff computer than that one it is connected to.
First simple check is to delete the partnership the device has with your computer and see if that helps
1. With the mobile device disconnected from your computer, start ActiveSync, click Delete Partnership on the File menu, and then click the partnership you want to delete.
2. Soft reset the mobile device. For information about how to do so, view the documentation that is included with your the mobile device.
3. IMPORTANT: When you perform this step, if you have data on your mobile device that is not yet on your computer, you should choose Combine when you receive a message that asks what you want to do with existing data on the mobile device.
Connect your mobile device to your computer, and then modify your initial settings by using the New Partnership Wizard. Note that the New Partnership Wizard automatically starts after you connect your mobile device.
Message Edited by HardBeatZ on 07-06-2008 10:21 PM

EM Database Control 11.1.0.6.0 을 구성하는 도중에 발생하는 repository create error에 관한

EM Database Control 11.1.0.6.0 을 구성하는 도중에 발생하는 repository create error에 관한
원인 및 해결 방법을 제시합니다.
Problem Description
다음은 emca를 구성하여 repository를 구성하려다가 실패하여 다시
drop하고 create 시에 이와 같은 ORA-20001 이라고 하는 SYSMAN user가 이미 존재한다고
하는 에러에 대한 해결방법입니다.
emca -deconfig dbcontrol db -repos drop 수행 중에 다음과 같이 failed가 발생하고,
구 43: WHERE username = upper('&EM_REPOS_USER') ;
신 43: WHERE username = upper('SYSMAN') ;
[09-03-2008 11:42:20] Drop Repos User. Return code = 58.
[09-03-2008 11:42:20] Failed. <===
[09-03-2008 11:42:20] Dropping Roles/Synonymns/Tablespaces ...
[09-03-2008 11:42:23] Return code = 66.
[09-03-2008 11:42:23] Failed.
[09-03-2008 11:42:23] Unquiescing DB ...
[09-03-2008 11:42:24] Return code = 66.
[09-03-2008 11:42:24] Failed. <===
[09-03-2008 11:42:24] Dropped Repository Successfully.
위와 같이 drop fail 이후에 emca -config dbcontrol db -repos create 수행 시
ORA-20001: SYSMAN already exists..
ORA-06512: 줄 17에서
이와 같은 에러를 만나서 다시 create가 제대로 되지 않는 경우를 볼 수 있다.
Environment :
아래의 이름과 환경변수는 사용자의 환경에 따라 달라질 수 있습니다.
OS : Microsoft Windows XP Professional 32bit windows
컴퓨터이름 : jeher
Database version : 11.1.0.6.0
ORACLE_SID : orcl
ORACLE_HOME : D:\app\jeher\product\11.1.0\db_1
em 에 사용되는 HOSTNAME_SID : jeher_orcl
에러 증상
아래의 log는 실제 emca 수행 시 자세한 log를 확인할 수 있는
D:\app\jeher\cfgtoollogs\emca\orcl\emca_repos_create_2008_03_09_14_39_55.log 의 내용입니다.
Check if repos user already exists.
구 6: WHERE username=UPPER('&EM_REPOS_USER');
신 6: WHERE username=UPPER('SYSMAN');
구 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
신 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
구 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
신 11: raise_application_error(-20000, 'SYSMAN does not exists..');
구 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
신 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
구 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
신 17: raise_application_error(-20001, 'SYSMAN already exists..');
구 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
신 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
1행에 오류:
ORA-20001: SYSMAN already exists..
ORA-06512: 줄 17에서
Explanation
이러한 에러는 주로 emca command 중에서 emca -deconfig dbcontrol db -repos drop
을 수행하다가 Service만 정리가 되고, repository가 깨끗하게 정리가 되지 않고
오류가 발생하거나 hang 이 발생하는 경우에 나중에 다시 create 시에 나타나는 에러입니다.
11g emca 수행 시 에러 log는 $ORACLE_BASE\\cfgtoollogs\emca\orcl\ 아래에 생성된 log를 확인합니다.
Solution Description
다음과 같은 명령으로 EM Configuration file들과 repository를 정리할 수 있습니다.
<Note:278100.1> How To Drop, Create And Recreate DB Control In A 10g Database?
A. Delete DB Control Objects 의 상세 설명은 Manual하게 DB Control을 DELETE하는 절차입니다.
이 부분을 보시면 아주 자세히 설명되어 있습니다.
The procedure is the same for 10g R1, R2 and 11g 11.1.0.6.0.
절차1) Configuration file 정리 작업
A) To delete the configurartion files:
- remove the following directories from your filesystem:
<ORACLE_HOME>/<hostname_sid>
예를 들어 D:\app\jeher\product\11.1.0\db_1\JEHER_ORCL 이라는 디렉토리를 제거합니다.
<ORACLE_HOME>/oc4j/j2ee/OC4J_DBConsole_<hostname>_<sid>
예를 들어 D:\app\jeher\product\11.1.0\oc4j\j2ee\OC4J_DBConsoleJEHER_ORCL 이라는
디렉토리를 제거합니다.
B) 레지스트리에서 SERVICE 제거 작업.
Note: On Windows you aslo need to delete the DB Console service:
- run regedit
- navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services
- locate the OracleDBConsole<sid> entry and delete it
OracleDBConsoleORCL 이라는 서비스 엔트리를 클릭하고 제거합니다.
Alternatively on Windows XP and Windows Server 2003 you can run the following from the command line:
'sc delete <service_name>' where <service_name> is the DB Control service name (typically: OracleDBConsole<sid>)
절차2) EM repository 를 manual 하게 drop하기.
To delete the repository
Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account
and mangement objects:
sqlplus "/as sysdba"
SHUTDOWN IMMEDIATE;
STARTUP RESTRICT;
EXEC sysman.emd_maintenance.remove_em_dbms_jobs;
EXEC sysman.setEMUserContext('',5);
REVOKE dba FROM sysman;
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN'
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
ALTER SYSTEM DISABLE RESTRICTED SESSION;
[참고 사항]
1) DROP USER mgmt_view CASCADE; 를 수행 시 이미 mgmt_view가 emca -deconfig 명령에 의해
drop이 되었다면 ORA-1918 ERROR가 발생하는데, 이는 무시합니다.
"ORA-01918: 사용자 'MGMT_VIEW'(이)가 존재하지 않습니다."
2) 참고 명령어
Note: The above(절차2) will completely delete the DB Control repository from the database;
under certain circumstances (e.g. you want to recreate the repository later on)
the following statemnts may be sufficient to remove the repository:
sqlplus "/as sysdba"
a. drop user sysman cascade;
b. drop role MGMT_USER;
c. drop user MGMT_VIEW cascade;
d. drop public synonym MGMT_TARGET_BLACKOUTS;
e. drop public synonym SETEMVIEWUSERCONTEXT;
===================================
절차3) EM console HTTP port와 Agent port 설정 해제 작업
Remove the entries for the old dbconsole information from the
$ORACLE_HOME/install/portlist.ini file
제거 작업 단계 중 마지막으로 D:\app\jeher\product\11.1.0\db_1\install\portlist.ini file
내에서 old dbconsole 정보를 제거합니다.
[ Example ]
Ultra Search HTTP 포트 번호 =5620
Enterprise Manager 콘솔 HTTP 포트(orcl) = 1158
Enterprise Manager 에이전트 포트(orcl) = 3938
위와 같이 Enterprise Manager 콘솔 HTTP 포트와 Enterprise Manager 에이전트 포트(orcl)
가 보이는데, 이 line들을 지웁니다.
아래의 절차4) 부터 절차8) 까지는 다시 create해주는 과정과 환경 셋업 작업입니다.
절차4) C:\WINDOWS\system32\drivers\etc\hosts file에서 다음을 추가해 줍니다.
127.0.0.1 localhost
10.10.10.10 jeher
10.10.10.10 은 내 네트워크 환경 -> 로컬연결영역3(Microsoft Loopback Adapter)
-> 속성(인터넷 프로토콜 TCP/IP)
-> 속성(다음 ip 주소 사용의 IP 주소가 10.10.10.10)
위와 같이 확인하여 얻어질 수 있습니다.
절차5) 다시 emca -config dbcontrol db -repos create 를 수행합니다.
절차6) 레지스트리에 문자열값 oracle_hostname 이 jeher로 되어 있는 지 확인.
절차5 가 성공적으로 수행이 되면 관리도구 -> 서비스에 OracleDBConsoleORCL 이라는
서비스가 다시 생성됩니다.
- run regedit
- navigate to HKEY_LOCAL_MACHINE/Software/Oracle/Sysman/OracleDBConsoleORCL
- 문자열값 oracle_hostname : jeher 로 되어 있는지 확인합니다.
절차7) emd.properties 에서 timezone 수정
D:\app\jeher\product\11.1.0\db_1\jeher_orcl\sysman\config 아래에 있는
emd.properties file에서 agent timezone를 Asia/Seoul 로 대소문자를 구분하여 입력합니다.
For example)
omsRecvDir=D:/app/jeher/product/11.1.0/db_1/jeher_orcl/sysman/recv
agentTZRegion=Asia/Seoul
이와 같이 저장하고 나옵니다.
절차8) EM 11g LOGIN 접속 방법.
https://jeher.kr.oracle.com:1158/em 로 접속하면 됩니다.
username : sys
password : oracle
connect as SYSDBA
OC4J 에 설치 시 보안 설정이 되어 있으므로, http 가 아닌 https 로 접속해야 합니다.
11g의 경우, password file이 자동으로 $ORACLE_HOME/dbs (windows 의 경우, $ORACLE_HOME/database) 아래에
생성되므로, 따로 생성이 불필요합니다.
remote_login_passwordfile='EXCLUSIVE'로 자동 setting 되어 있습니다.
References
<Note:278100.1> How To Drop, Create And Recreate DB Control In A 10g Database?

I ma using correct sid, have a look at /etc/oratab
[oracle@rac1 bin]$ echo $ORACLE_SID
orcl
[oracle@rac1 bin]$ cat /etc/oratab
#Backup file is /raczone/11.2.0/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.rac1 line added by Agent
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by the Database Configuration Assistant when creating
# a database.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
#   $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
#+ASM1:/raczone/grid_home:N             # line added by Agent
#dev:/raczone/db_home1:N                # line added by Agent
#*:/raczone/oem/OracleHomes/db10g:N
#*:/raczone/oem/OracleHomes/oms10g:N
#oemrep:/raczone/oem/OracleHomes/db10g:N
#*:/raczone/oem/db10g:N
#*:/raczone/oem/oms10g:N
#oemrep:/raczone/oem/db10g:N
+ASM1:/raczone/grid_home:N              # line added by Agent
# *:/home/oracle/OracleHomes/db10g:N
# *:/home/oracle/OracleHomes/oms10g:N
emrep:/home/oracle/OracleHomes/db10g:N
*:/home/oracle/OracleHomes/db10g:N
*:/home/oracle/OracleHomes/oms10g:N
oemrep:/home/oracle/OracleHomes/db10g:N
dev:/raczone/db_home1:N         # line added by Agent
orcl:/raczone/11.2.0/product/11.2.0/dbhome_1:N          # line added by Agent
*:/home/oracle/Oracle/Middleware/oms11g:N
*:/home/oracle/Oracle/Middleware/agent11g:N
[oracle@rac1 bin]$

Synchronization error CRTranDB::AddNew : Duplicate record Id - FFFFF99B

I very recently upgraded to the new Blackberry Desktop Software for my Torch 9810. the transition seemed to go well, I did a number of syncs w/o problems. This morning I suddently received the sync error in the subject line, which is preventing me from completing a sync. Help?
Syncing w/ Microsoft Outlook
Matt

Hello,
To resolve the synchronization error "CRTranDB::AddNew : Duplicate record Id", please backup your BlackBerry® smartphone and clear the Address Book All database.
The following KB articles provide the steps to backup and to clear the Address Book All database.
"How to back up data on a BlackBerry smartphone" http://bbry.lv/IWfPl0
"How to clear the user content databases from the BlackBerry smartphone" http://bbry.lv/JtQKcw
Once the Address Book All database has been cleared, please try to synchronize again.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Synchronization Error Redemption is not installed.

I have recently installed Microsoft Office Professional Plus 2013 in its 64 bit version on my computer (Windows 7 professional, Service Pack 1). When trying to synchronize my BlackBerry (Bold 9900) I am getting the following message:
Synchronization Error Redemption is not installed.
I am running on the BB OS 7.1 Bundle 2807; the BlackBerry Desktop Software is version is 7.1.0.14, released 07 March 2013 (Bundle 42).
Running the 32-bit version of Office does not produce the error message.
My provider is T-online, they called me and told me that they can’t help.

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB31987 "Synchronization Error Redemption is not installed." occurs when synchronizing organizer data
Unfortunately, it contains nothing more useful than recognition by BB that the problem exists, but no workarounds or solutions are offered. However, I do notice that it states to be applicable to earlier Desktop Software versions...
In any event, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SYNCHRONIZATION ERROR BOLD 9700 (CRTranRec;;)

I have changed my laptop and installed the newest version of the BB Desktop Software; while trying to synchronize the phone and the laptop (calendar, messages, etc.) i get the following Synchronization Error message
"CRTranRec;;Get Modified Info. Modified Info not available"
What could be the problem?

it might be a corrupted entry on the device, choose one at a time and see where it bugs
check messages, then calendar etc...
Click on the thumbs up if you like the reply

Synchronization Error FF2B2649

I have a Curve 8320 running on software v4.5.0.81. It has always synchronized flawlessly with my HP EliteBook 8530p. But today I get this message: "Synchronization Error! Record with specified Id (FF2B2649) not found."
Help! How do I fix this? I need my laptop and phone to work together and right now, that sure is not happening!
Walter

Hi and Welcome to the Community!
Try changing your view, in Outlook, of your calendar to a tabular view. Then you can sort by start date and see what's going on. Sorted that way, it's likely the first or the last record that is the problem.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

LMS3.2, RME4.3.1, software Repository Synchronization error

Similar Messages

Maybe you are looking for