LMS3.2-Swim: can't upgrade 2960 catalyst using ssh

Hi,
Customer has LMS 3.2 on windows.
We can't upgrade 2960 using ssh, using telnet is ok.
There is no firewall.
You will find debug log for 2 devices:
- 2960-H2-B1-2 : upgrade by ssh failed
- 2960-H2-B1 : upgrade by telnet is ok
all 2960 devices upgrade by telnet are ok
all 2960 devices upgrade by ssh are failed
You will find debug log.
Many thanks,
Elisabeth

Given the timeout problem, you are likely encountering                                                                                                                     CSCsu51740. The problem is that SSH causes RME to lock up, then the job times out.  The problem is fixed in 12.2(50)SE1.  The workaround is to upgrade to 12.2(50)SE1 using telnet, then revert back to SSH for future upgrades.

Similar Messages

  • Can I upgrade to ios5 using a pc that is assigned to a different apple Id for iTunes?

    It is a windows 7 pc. My husband pc had to be returned due to hardware failure. However he wants me to upgrade his iPhone 4 Verizon to ios5 and iCloud using my pc that I use for my iPhone and iPad with iTunes. Should we wait for his own of or can I upgrade him on my pc and iTunes account?

    Can I upgrade to ios5 using a pc that is assigned to a different apple Id for iTunes?
    No. Everything on your devices would be deleted.

  • Can I upgrade iCloud storage using iTunes cards for payment?

    I have chosen not to use my credit card in conjunction with my AppleID, so I purchase all of my apps and media using iTunes cards.  Can I pay for upgraded iCloud storage using iTunes credits?  I would prefer to pay one year at a time using those credits, but if it needs to be monthly, that would be fine as well.  I just want to use the iTunes cards instead of a credit card for the payment.

    Thank you.  So to clarify, if I put a credit card on file for this AppleID, but I have plenty of iTunes credit to cover the monthly cost, then the monthly fee will be pulled from iTunes credits instead of my credit card.  Is that correct? 
    It sounds like the credit card is required in order to provide a backup payment option if the iTunes credits are all used up.  Is that also correct?
    You're awesome!! Thanks for the help.

  • Can't upgrade or update using x-terminal. .any ide...

    My N900 version is 21.2011.38-1.200.I haven't upgeaded to CSSU.
    Now on using apt-get update command in x-terminal following message comes up:
    E: Could not get lock /var/lib/dokg/lock - open (11 Resources temporarily unavailable).
    Same message is displayed with 'upgrade' command too.
    Can anyone give idea to solve it.
    Solved!
    Go to Solution.

    matthew_maude wrote:
    this error usually means you have the app manager open, or you've just closed it...
    the command beforehand can just be 'root' try running these commandfs in order
    root
    apt-get update
    apt-get upgrade -y
    if you get the error again, run 'top' and see if there is a process called apt-worker running. it might be apt-worker.real, can't remember off the top of my head. if its there run 'killall apt-worker' then try the apt-get commands again
    hopefully it'll work for you but if not let me know
    Yes, what he said! 
    you may run into a challenge with the "-y" if so, just do not use the -y in the command and then when it gives you the option to approve type the "y" and enter then.
    the -y should bypass the question and auto upgrade without question, but i have had issues with it in the past not accepting the command that way.

  • I don't have Itunes on my Linux box, How can I Copy Movie Files using SSH?

    Can anyone point me to the directory where Movie files are stored..Since I don't have itunes on my machine, I can even search for movie files to see where these movie files may be..
    Any help would be appreciated..

    All purchases are considered final, but you can try contacting iTunes support and see if they will give you a refund or credit : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Upgrading to Tiger using an external DVD Drive

    Our computers at work don't have internal DVD drives. When we try to install Tiger using an external DVD we can't get past the restart process. We insert the DVD into the external DVD drive and restart our computers. Once the computer restarts, we double-click the Tiger DVD and it once again tells us to restart. My questions is....Can you upgrade to Tiger using an external DVD drive or should I request the CDs from Apple for the upgrade?
    Thanks,
    Devra
    Power PC G4   Mac OS X (10.3.9)  

    Hi Devra,
    first of all: WELCOME TO THE DISCUSSIONS!
    Be aware that you CANNOT boot from an external USB-drive: Don't start up from an external USB device. You have to use an external firewire drive. Then insert the DVD and reboot while holding down the Option-key. Select the DVD in the external firewire drive as boot volume.
    You also might want to follow this procedure: 10.4 Tiger Upgrade: Decision tree+Checklist . It also covers potential install errors due to outdated firewire-drive firmware.
    If this answered your question please consider granting some stars: Why reward points?

  • Upgrading to Leopard using ARD

    Because I have an iMac with no keyboard or mouse, I control using Apple Remote Desktop 3.2. The iMac is currently running OS 10.4.11 and I would like to upgrade it to Leopard.
    Can I upgrade to Leopard using ARD? I thought about doing the Archive Install & Preserve User Settings, but I wasn't sure if I would lose the ARD connection when I boot off the Leopard DVD.
    Has anyone had experiences upgrading the OS using ARD and have recommendations on how to proceed?
    Thanks in advance for your help.

    You cannot install an entire OS using ARD.

  • Can't upgrade Catalyst 2960S-48LPS-L to 15.0.2X

    I just purchased a new 2960S-48LPS-L. I can't upgrade it past 15.0.1-SE3. If I try to go any newer with the firmware it gives a licensing error. Then it boots into a cut mode of the IOS. Below is a copy of the licensing error after it boots to a newer IOS. The same error also appears in the switch log.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Press RETURN to get started!
    *Mar  1 00:00:09.332: Read env variable - LICENSE_BOOT_LEVEL = Mar 30 01:27:38.047: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2960s_lanbase Next reboot level = lanbase and License = No valid license found Mar 30 01:27:38.062: %LINK-4-NOMAC: A random default MAC address of 0000.0c8a.5700 has
      been chosen.  Ensure that this address is unique, or specify MAC
      addresses for commands (such as 'novell routing') that allow the
      use of this address as a default.
    Mar 30 01:27:39.352: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Wed 09-Apr-14 03:09 by prod_rel_team

    The switch does load the 15.0(2)SE6 and comes up to that prompt showing that there is no valid lanbase license. At that point it comes up to a cut version of the IOS it only shows a couple of enable and configuration commands (not the full list). It won't let me save the running configuration, it  also won't let me reboot the switch through the reload command. Due to it not being able to access the startup-config. The switch works perfectly running IOS 15.0(1)SE3 and below.
    It gives the below errors while running IOS 15.0(2) and newer:
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch>ena
    Switch#wr mem
    startup-config file open failed (No such device)
    Switch#
    Mar 30 01:31:51.514: %SCHED-7-WATCH: Attempt to lock uninitialized watched semaphore (address 0). -Process= "Exec", ipl= 0, pid= 3
    -Traceback= 37D834z 12F94B8z 38645Cz 38670Cz 3325F4z 2D049Cz 2D66BCz 2E5D00z 1C2CCE8z 1C27298z
    Switch#reload
    Proceed with reload? [confirm]
    The startup configuration is currently being updated. Try again.
    Switch#
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Anyways here is the show version from the switch when it is trying to run the 15.0(2)SE6 IOS. As you can see the Show License is not an available command in the cut IOS.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch#show ver
    Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Wed 09-Apr-14 03:09 by prod_rel_team
    ROM: Bootstrap program is C2960S board boot loader
    BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
    Switch uptime is 8 minutes
    System returned to ROM by power-on
    System restarted at
    System image file is "flash:c2960s-universalk9-mz.150-2.se6.bin"
    cisco WS-C2960S-48LPS-L (PowerPC) processor (revision D0) with 131072K bytes of memory.
    Processor board ID
    Last reset from power-on
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 3C:0E:23:4A:EF:00
    Motherboard assembly number     : 73-12423-06
    Power supply part number        : 341-0328-02
    Motherboard serial number       :
    Power supply serial number      :
    Model revision number           : D0
    Motherboard revision number     : A0
    Model number                    : WS-C2960S-48LPS-L
    Daughterboard assembly number   : 73-11933-04
    Daughterboard serial number     :
    System serial number            :
    Top Assembly Part Number        : 800-32448-02
    Top Assembly Revision Number    : C0
    Version ID                      : V04
    CLEI Code Number                : COMCU00ARD
    Daughterboard revision number   : A0
    Hardware Board Revision Number  : 0x01
    Configuration register is 0xF
    Switch#show license
                  ^
    % Invalid input detected at '^' marker.
    Switch#show run
    Unable to get configuration. Try again later.
    Locked by -1
    Unable to get configuration. Try again later.
    Locked by -1
    Switch#
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Here is the version and license output when the switch is functioning properly with the 15.0(1)SE3 Loaded:
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch#show ver
    Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(1)SE3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Wed 30-May-12 14:35 by prod_rel_team
    ROM: Bootstrap program is Alpha board boot loader
    BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
    Switch uptime is 13 minutes
    System returned to ROM by power-on
    System image file is "flash:c2960s-universalk9-mz.150-1.se3.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco WS-C2960S-48LPS-L (PowerPC) processor (revision D0) with 131072K bytes of memory.
    Processor board ID
    Last reset from power-on
    1 Virtual Ethernet interface
    1 FastEthernet interface
    52 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 3C:0E:23:4A:EF:00
    Motherboard assembly number     : 73-12423-06
    Power supply part number        : 341-0328-02
    Motherboard serial number       :
    Power supply serial number      :
    Model revision number           : D0
    Motherboard revision number     : A0
    Model number                    : WS-C2960S-48LPS-L
    Daughterboard assembly number   : 73-11933-04
    Daughterboard serial number     :
    System serial number            :
    Top Assembly Part Number        : 800-32448-02
    Top Assembly Revision Number    : C0
    Version ID                      : V04
    CLEI Code Number                : COMCU00ARD
    Daughterboard revision number   : A0
    Hardware Board Revision Number  : 0x01
    Switch Ports Model              SW Version            SW Image
    *    1 52    WS-C2960S-48LPS-L  15.0(1)SE3            C2960S-UNIVERSALK9-M
    Configuration register is 0xF
    Switch#show lic
    Index 1 Feature: lanlite
            Period left: 0  minute  0  second
    Index 2 Feature: lanbase
            Period left: Life time
            License Type: Permanent
            License State: Active, In Use
            License Priority: Medium
            License Count: Non-Counted
    Switch#

  • Can't upgrading my Muse Website

    Hi everyone,
    I made my website with Adobe Muse.
    I bought my domain name to a Register and i linked this domain name with the DNS Business Catalyst, and that WORKS !
    www.wazzabi.fr
    Currently, my hosting plan is WEBBASICS, but i want to upgrade it in to a WEBMARKETTING Plan.
    The problem is that I have no UPGRADE button in my dashboard (ADMIN CONSOLE).
    The support sent me a link :
    http://www.businesscatalyst.com/Admin/Index.aspx?to=PartnerPortal
    But i have the same problem, NO UPGRADE BUTTON in the "CLIENT" page.
    I can only upgrade my website if i create a new website with a ANOTHER domain name.....But i want the domain name www.wazzabi.fr that i published with my adobe muse site.
    Could you help me please?
    PS :Sorry for my english (i'm french)

    Please refer to a similar thread here.
    http://forums.adobe.com/message/5114365#5114365
    In short, redeemed webBasics sites cannot be upgraded at this time. So simply create a new site through your Partner portal <http://www.businesscatalyst.com/Admin/Index.aspx?to=PartnerPortal> (while being logged in with the same Adobe ID with which you have published your current site) and select a plan you like such as webMarketing. Now push your site through Muse to this newly created webMarketing site. You will find the URL for your new BC site under the "Publish To" dropdown within Publish options in Muse.
    Once your Muse site is published to a new BC site under webMarketing plan, login to your current webBasics site admin <http://wazzabi.businesscatalyst.com/Admin>, go to Site Settings -> Site Domains and Delete the domain and all associated DNS records off it completely.
    At last, login to the BC admin of your webMarketing site and add the domain - http://kb.worldsecuresystems.com/kb/change-domain-name-site.html#main_Step_3___Add_the_dom ain_name_to_your_site
    Thanks,
    Vinayak

  • Can not upgrade online

    Can not upgrade online
    I keep on encoutering an error saying me that i can not upgrade online or change my services. it keeps me asking to call verizon to make changes.
    Why the error ? I recently made some chanegs to my account and the error happened after that . something looks broken.

    Verizon support is in receipt of this issue. We will send you a PM to gather additional information.
    Thanks,
    Tonya D.
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Can I upgrade my Sony Laptop's Graphic Card?

    My laptop is relatively new and I only bought it a few months ago, model #VPCEB. It currently has a 512 MB ATI Radeon HD 5470 which I want to upgrade so I can have StarCraft II run smoothly because it is kind of choppy right now. I just want to know, is there a way I can actually upgrade my computer and what would be a good graphics card?

    iamdre17 wrote:
    My laptop is relatively new and I only bought it a few months ago, model #VPCEB. It currently has a 512 MB ATI Radeon HD 5470 which I want to upgrade so I can have StarCraft II run smoothly because it is kind of choppy right now. I just want to know, is there a way I can actually upgrade my computer and what would be a good graphics card?
    It used to be that some laptops would come with 2-3 options of graphics chipsets, and you could swap between them, plus manufacturers might use the same form factor for a series of laptops (For example, all Dell Inspiron 8000 series units used the same card form factor - so you could upgrade an I8000 to the graphics chipset that came with the I8200).  This is no longer the case, even the highend gaming laptops don't have upgradeable graphics.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Can I upgrade my HP ENVY 14 DR DRE Laptop to a blueray and SSD drive?

    HI all,
    Can I upgrade my HP ENVY 14 DR DRE Laptop to a blue ray and SSD drive?
    cheers

    You can upgrade from HDD to SSD drive, but will not recommend it as it will void the warranty on the unit.
    Pertaining to  bluray drive, you might have some compatibility issues unless you find the right model.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Can i upgrade my mac ox laptop to lion..

    can i upgrade my mac ox laptop to lion..

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    Mac OS X & Mountain Lion Communityhttps://discussions.apple.com/community/mac_os
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns

  • Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
    Here is a page from CPU-World that gives the specs for your processor:
    http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
    You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

  • Can I upgrade my Laptop Hardware?

    I have HP pavilion G6 Notebook
    Q6470PA#ACJ is product code
    Inter Core I5 2340M 2.4 GHz
    and graphic card is AMD 6470M
    Hard Disk is 600 GB
    Can I upgrade My grpahic card or Hard Disk space?
    If yes , how can i do it?

    Graphics card no; not possible at all. Hard drive; yes but only by 40% to 1 TB and as a practical matter only 750gb drives currently have good performance. 1TB drives are big but slow.

Maybe you are looking for