LMS4.1 OGS doesnt work for Eventconsole/Syslog

Hello,
Device selection doesnt work for Monitoring=>Eventconsole/Syslog, but you can filter with the filter function inside Eventconsole/Syslog
but without the possibility for device filtering. Message-Box "No device found ... " will appear also with selecting "All devices"
Device selection (OGS) works in any other applications - with being extremly slow for nested user defined groups btw - including to generate syslog reports from report generator.
Because Spectrum is used for FM in this network, customer will save resources at the slow GUI responding LMS server and switched DFM off, by deactivation at Admin > System > Device Management Functions.
Is the device selection issue in Monitoring=>Eventconsole/Syslog a known bug and can count with a bugfix in future?
Steffen
P.S.: after switching the GUI to https, the syslog subscription has been stopped due to a cerificate trusting issue. I expect from a prime SW that this should be included in the https mode switching automaticly.

Please try the following steps:
1. Stop the daemon manager (Net stop crmdmgtd).
2. Regenerate the SSL certificate (Dont forget to start you shell/command prompt session as Administrator):
     *Remove server.* files under NMSROOT\MDC\Apache\conf\ssl (take backup of all 4 files before deleting).
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -disable
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -enable
     *Fill all the details it request for.
     *Ensure that the following files are created under NMSROOT\MDC\Apache\conf\ssl :
server.crt
server.csr
server.key
server.pk8
3. Start the daemon manager (net start crmdmgtd).
4. Try to access the GUI with https://xxxxxx:443.
-Thanks

Similar Messages

Calculations in Page /Dashboard Prompts in OBIEE doesnt work for me .

Hi ,
Iam trying to create a Custom Aging Report instead of using the OOB Aging report . In the report I created column ( only at this report level) "% of Outstanding Amount in AR Past Due 1- 30 Days" by changing the "Fx" and Now I can see the $$ amount that customer has due as well as how much % is that in the total Outstanding Amount. The report is coming good. Now I have a business requirement that the groupings such as 1-30 , 31-60 , 61-90 , and 90+ should be given in dashboard prompt . I could create 1-30 , 31-60 , 61-90 but 90+ ( 91-180, 181-360 , 360+) prompt is not working as I tried to concat these three groupings and iam getting the error message as " Un resolved column error , Concat Function does not support." and other thing when i tried to create a calcualted % prompt even that is giving me error message as " Unresolved colum. I think the Calculations doesnt work for Dashboard prompts ..but iam not sure ..May be Iam missing somethg , Can anybody pls help me in getting this fixed . How to create a calculation for page/Dashbaord Prompts ...I tried using the sql too but still it gives the error.
Please help
Thankyou
Karthik

In your dashboard prompt properties you need to tick the 'Constrain' box for all the columns that you want be constrained by the other choices, e.g Year, Quarter, Month.
Only tick Product Name / Order Name if you want these to be constrained also but bear in mind it could cause a performance delay if you are having to join tables to get the constrain.
Hope this helps,
Regards
Alastair

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

Have you went to Bose"s support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?

Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?

fionaxo wrote:
Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?
Did Apple tell you that they won't provide support for a device that has had unauthorized service?

Why EPCM.donavigate doesnt work for Iview with isolation type embedded

I am using EPCM.donavigate in JavaScript in portal jspdynpage to navigate to different page. This works fine when my iView isolation method is URL but it doesnt work when it is embedded. Am I missing something here? some import?
Regards,
Nitesh

Hi,
In Javacript of Portal jsp page, we are calling EPCM.doNavigate method as below:
function callfunc(obj,externalLink,rid,portalPageURL,InvalidLink)
return EPCM.doNavigate('ROLES://' + obj)
Final URL look something like this...
portal_content/com.sap.pct/com.sap.prod_fld/com.sap.roles/com.sap.rol_career/com.sap.wks_1_1/Folder_2/com.sap.pag_1_1_2
This Code works only for Iviews with URL Isolation but doesnt work with Embedded Iviews as my Page which contains this Iviews is also Embedded and Desktop is also embedded.

Adobe download doesnt work for either plug ins or not

No messages come up. all i see is an icon that spins showing something happened. i have error messages in my error console and i dont know how to screen shot, dispute the how to do it page. all i can do is cut and paste ...Warning: Unknown property 'box-shadow'. Declaration dropped.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 316
Warning: Error in parsing value for 'filter'. Declaration dropped.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 319
Warning: Expected media feature name but found '-webkit-min-device-pixel-ratio'.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gnav.css
Line: 404
Warning: Expected declaration but found '*'. Skipped to next declaration.
Source File: http://wwwimages.adobe.com/www.adobe.com/ubi/template/identity/adobe/screen/gfooter.css
Line: 13
theres more but that will do. i have put websites into safe for anti virus and firewall. have done everything re cleaning cache etc etc.

The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.2"
**New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
**'''''Security update for versions 9 and 10 were released 2011-02-08'''''
*Shockwave Flash 10.0 r32
**'''''Security update version 10.2.152.26 released 2011-02-08
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Hi, my boyfriend send me iphone4s from canada as a birthday gift last year. my problem was my wifi button on my 4s doesnt work for almost 4mos.and they dont have any apple service center here in the philippines. please help me for the remedy. thanks alot

my boyfriend send me an iphone 4s from canada last march 2012. my problem is the wifi button of my 4s doesnt work since May this year. unfortunately here in the philippines there's no apple service center available.help me what to do so that i can use wifi again from my fone. thanks alot!

First, try the steps Apple has here:
http://support.apple.com/kb/TS1559
If those do not help, your iPhone may well need service. You will not be able to get a Canadian iPhone serviced by Apple in the Philippines. You will need to send the iPhone back to your boyfriend or someone else in Canada who can get it serviced there and then send it back to you.
Regards.

Apply source formatting doesnt work for php

for whatever reason i cannot get Apply Source Formatting to
reformat any of my PHP code
i have my files saved as .php, i have my php tags at the
beginning and end of the document, and i also have Code Coloring
set to PHP
is there something i am missing? how can i let dreamweaver
know that i am using php otherwise?

Dang - it works for me. Or maybe I just thought it did.
Apologies....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f5tst1$c7a$[email protected]..
> Murray *ACE* wrote:
>> Which DW? It works for me in CS3 on
XPPro/Vista/OSX10.4x (and in
>> previous versions, too).
>
> Really, Murray? You must have a very special version of
Dreamweaver.
> Source formatting doesn't work with any server-side
language or
> JavaScript. It's something that coders have been asking
for for a long
> time. DW CS3 certainly doesn't format PHP in XP Pro.
>
> I suggest that the OP adds his/her voice to the request
for source
> formatting for non-HTML code by filling out the feature
request form:
>
>
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
>
> --
> David Powers, Adobe Community Expert
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Water damage speaker doesnt work for music/ videos

I was on the shower and a bit of water hit my iphone 4s specifically on the ear speaker, though it is still working ear speaker is not and cannot play music/ videos using the speaker, but I can use the speaker when talking to someone on the other line, its either that or I use and earphones. What do I need to do?

Put it in a container with rice, close it and pray hard that the damage isn't permanent. I know someone who had a similar situation, got lucky and their phone works perfectly. I also know another person whose phone was permanently damage.
Also, remember it is never good for your phone to be in places like that, it can be damaged not just by accidental splashing but also by steam and overall humidity. In short, iPhones and shower rooms don't mix.

My wireless drivers for Windows 7 Home Premium doesnt work for some reason. I downloaded plenty drivers and it still doesn't work. Please help?

Well I just recently downloaded Windows 7 on my macbook a few hours ago. Everything work fine except for my wireless driver. My internet is completely fine because im currently using another computer in my house that is connected wireless to type this. What can it be? Please help.

Hi Somehunk,
Welcome to the Support Communities!
The first thing I would suggest is to quit the iTunes Store app and sign out of your iTunes Store account on your iPhone.
Then restart / reset the device.
When you sign back in, you should be able to re-initiate the download.
The following articles will explain these steps in more detail:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
Judy

Flash player doesnt work for IE (64 bit) - for me anyway

ive got windows 7 (64bit) and in a recent up date i believe internet explorer (64bit) downloaded, it works fine except flash player doesnt at all, no updates i download make it work either
but then i switched back to using the normal IE and everything works fine
how do i solve this problem?
this may be a problem being experienced by others - i hope

Hi, well since Adobe Flash Player doesn't support the 64bit, you need to use the 32bit browser. This is the default on Win7/IE8 systems. Go up to Help, About Internet Explorer and if you see x86, you are using the 32bit.
Also you need to use the 32bit browser when Installing Flash Player and to view Flash.
Thanks,
eidnolb

Microphone doesnt work for phone calls

But it does for every other app that needs it, like snapchat voice memo instagram etc..
any ideas on how i can fix this without going in to the apple store and being ripped off?

The hands free mic is the upper mic and should be working fine. Otherwise the logic board is faulty. If you can only perform hands free calls, then the lower mic is faulty. The replacement part is the iPhone charging port with flex cable and lower mic, about $5 part.

Assigned access mode doesnt work for Siena Apps?

Hey guys,
we have written up an App to do an about us type interactive experience and had hoped to deploy it to our foyer with assigned access to stop people closing the app/logging out etc.
Is there no way to do this? Assigned access doesn't let me specify the sienna App.
Cheers,
Jim

Hello,
I am wondering if this issue has been resolved. I had messed around with assigned access and was planning on creating an simple local html site and have assigned access use IE but I did not like all of the ability the user had while in kiosk mode and using
IE. so i researched and found Siena. I have spent some time creating a Siena app to use as an assigned access user in kiosk mode but as described above.. Even though I have installed the published app it is not in the list of apps when I try to associate the
user with the app in assigned access settings.. Seems I have wasted much time trying to get something to work in kisok mode only to still be back at square one.
Does anyone have a solution or another app option to create something to display in kiosk mode where the user has very limited capabilities except for viewing what I want to display to them?,
Paul

PANTECH UML290 DOESNT WORK FOR ONLINE GAMING PLSE HELP!!!

my modem is Pantech UML290 .i notice cannot play any online games...my old 3g modem works perfectly with the same games but this new service as far as online games or this modem apparently has issues...i have had nothing but problems, high ping rates and packet loss as well as jitter and no one with the exception of 1 service tech apparently cares TECH DID A PING TEST AT ADRESS ping -a 66.174.92.14 result were request timed out 4 times, packets sent=4 packets recieved=0 pakets loss = 4 , total= 100% loss, funny thing is i was still connected to internet and if you ping google.com 0 paket loss... apparently consistancy or server recognition might be a problem i dont know...maybe modem is bad...either way i cannot play any online games what so ever, when tested at speed test.com and pingtest.com states high ping and high jitter as well as packet loss, no one seems to have an answer for this note!! on old 3g device i had played these same online games without any problems...so this 4g modem and service advertises online gaming and steady streaming and i cannot do neither why??? someone plse help!!! also if you look under vz access manager statistics tab, you will see transfer and recieve rates like a heart beat monitor....it consistantly goes up and down like a heart beat instead of a steady flow, goes up as high as 10mbs then drops for a while to 0kbs and stays their for a lil bit...it apparently is loosing communications....old 3g device was a steady transfer flow rate that never dropped to 0 unless i wasnt doing anything...so why is this as well?

have'nt had any phone call's today regarding the slow down of my BT infinity broadband line.. in the last 3 hours have been online on both the PS3 & the XBOX and the problem is still there... im host in every online game i play but each game is almost unplayable every time..the actual game i play as host on the PS3 runs really slow (only as host) and looking left/right has a blurry feel to it.. on the XBOX its running slightly quicker but still nowhere like it does on both consoles when im not hosting.. when ever everybody else hosts a game that i join,after speaking to them they have had no problem what so ever.. most seem to be on a cable ISP but the speed stats are very simular to mine.. just the hosting is totally different for me...???
http://speedtest.net/result/1586999761.png
http://www.pingtest.net/result/50309878.png
just tested my speed with the above score... i still cant work out why my line is being slowed down ....
just reiterate that my g/f works from home mon-fri 8am-5pm on a live server including emails etc... the live server would involve being logged on all day checking accounts including various stock levels etc.. so she is very busy pretty much every day..
im online with my PS3/XBOX prob a couple of nights a week plus as i do shift work,on my days off i play COD most of them days .. so prob around 40/50 hours a week playing online depending..
i chose option 2 BT Infinty unlimited because i new i needed a very good line with all mine and my g/fs needs..

CS4 Problems My code doesnt work for ME only

I have started trying to work with Actionscript 3 to get some knowledge in it before I make the leap to CS5/Flex etcand after wrting some code (a few buttons, a simple web page) when I test the movie.. it appears broke to me (just srcolls through everything, none of the buttons etc work) but when i send it to collegues to see if something is wrong... they tell me it works perfectly.
Why is this happening and how can I fix it so i can see if my code is actually working?

heres one better.. heres the entire file
http://www.filefactory.com/file/b1ea260/n/Mad_OverLordStudios2.fla

LMS4.1 OGS doesnt work for Eventconsole/Syslog

Similar Messages

Maybe you are looking for