LMS4.1 Software Distribution Failing

Hey.
I'm currently unable to upgrade certain devices since Cisco Prime incorrect believes there is not enough room in the flash partition.
For example.
Getting the following error messsage trying to upgrade some Cisco 871 routers:
"Catastrophic - SWIM1200: Selected Flash partition requires minimum (28 MB) to upgrade selected software/image."
The images are around 18 MB in size. Why does Cisco Prime thinks its 28 MB in size? Bug?

Seems they have reintroduced an earlier bug.
LMS 3.1 - CSCsu49349.

Similar Messages

  • CISCO PRIME LMS 4.1 ---- Software distribution fails with SWIM1113

    Device will be rebooted.
    SWIM1113: Device Reboot operation failed or Reboot Verification failed.
    The device is not running the new image after it is rebooted.
    Verify the configuration used to load the new image. Verify whether the new image exists on the device in a valid Flash partition
    the software distribution , i select image  for upgrade for router 1841  and select reboot immediatly after downloading so my device take new image but can not reload with new image ...
    please help me

    check if you have this command configured on the device ::snmp-server system-shutdown
    if not configured it and it should reload it
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ***

  • Apple Mobile Device Support won't install via software distribution tool

    Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
    DIFXAPP: ENTER: ProcessDriverPackages()
    DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
    DIFXAPP: INFO: Component state 0x2 -> 0x3
    DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
    DIFXAPP: INFO: 'Flags' is 23
    DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
    DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
    DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
    DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
    DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
    Action ended 15:59:25: MsiProcessDrivers. Return value 3.
    Action ended 15:59:25: INSTALL. Return value 3.
    The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
    Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

    Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
    DIFXAPP: ENTER: ProcessDriverPackages()
    DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
    DIFXAPP: INFO: Component state 0x2 -> 0x3
    DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
    DIFXAPP: INFO: 'Flags' is 23
    DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
    DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
    DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
    DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
    DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
    Action ended 15:59:25: MsiProcessDrivers. Return value 3.
    Action ended 15:59:25: INSTALL. Return value 3.
    The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
    Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

  • Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

    Hi All
    I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
    Below are certain assertions i am putting forward for your expert views or you may in a similar situation
    1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
    name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
    2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
    3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
    source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
    Regards Sushain KApoor

    This is a duplicate of
    https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
    Please do not double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Error found in Software Distribution log

    I found below error in my software distribution log. I think it is related to WSUS and many comptuers are not getting proper patches. Any resolution is really appriciated
    2014-11-24 15:27:26.773 UTC    Warning    w3wp.325    SoapUtilities.CreateException    ThrowException: actor = http://xxxx.xxxx.xxxx.com:8530/ClientWebService/client.asmx, ID=e5cd4691-63d8-4740-b5a6-f732027896db,
    ErrorCode=ConfigChanged, Message=, Client=e78cd58f-cb87-4829-945d-d5ab39d8486d

    What do you mean of "not getting proper patches"?
    Did these clients fail to update with any error code?
    Almost certainly the above log entry is occurring in combination with an 0x8024400D error code ... a very common manifestation of duplicated SusClientIDs.
    The log snippet on the client side would look something like this:
    2012-02-09 10:02:34:595  948 1994 PT WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2012-02-09 10:02:34:595  948 1994 PT WARNING: SOAP Fault: 0x00012c
    2012-02-09 10:02:34:595  948 1994 PT WARNING:     faultstring:Fault occurred
    2012-02-09 10:02:34:595  948 1994 PT WARNING:    
    ErrorCode:ConfigChanged(2)
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     Message:(null)
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     ID:6b1c0796-e40b-4800-a3c9-d75624d59acf
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Software Distribution - Problem with 1921 Routers

    Hello everybody,
    we are having some weird troubles in our Cisco LMS 4.2
    A Software Distribution works fine for all kinds of our Routers, except the 1921 models. We are using SCP and SSH for the Image distribution and the exactly same configuration on a 1841 and a 1921 works on the 1841 Router but on the 1921 not.
    I didn't found any Bugs related to this, maybe it's a problem with the lms settings?
    Done so far:
    - Deleted the device in LMS, added it via discovery and manually, no change here
    - Tried with different IOS versions, no change here, no one will work
    - Set the credentials after adding the device again, to make sure they are valid
    When creating a new distribution job, we get this error at Step 3 of 5 only at the 1921 Router, so I guess this might be the problem:
    Warning
    -           SWIM1056: The method to update the software on the selected storage device is unknown.
    Select a different Flash partition, if available.
    I attached a SWIM_debug logfile from a failed job. (changed all the DNS names do XXXDNSNAMEXXX).
    Thanks for your help

    More than USB it could be SCP. There is a know bug for SCP on 19xx router :
    CSCuc98074    LMS 4.2.2 Software Image Distribution fails with SCP on 1921 routers
    Just try to change SCP to other protocol and see it that works. Make sure you have all device packages updated for LMS.
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • SCCM 2012 software distribution not able to distribute content for chrome

    Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
    just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
    for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
    Thanks and best regards, -- KF

    Thanks, Narcoticoo!your advice is helpful!
    So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
    is for uninstallation? Can I create a  bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
    /silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
    Thanks!
    Thanks and best regards, -- KF

  • (8200) Unable to access Software Distribution Directory

    Hello there:
    There is a couple of POAs running in a two server clustered environment.
    The Software Distribution Directory is in separate cluster resource other
    than the POAs resources. When the POA starts the above message is showed.
    Something I already done is write Netware style "Server/volume:" path in
    the SDD definition and it works only if the SDD resource is on the same
    server the POA is running, so when I write Cluster Resource Name style it
    fails again. Also checked rights and everything as far as I know. Any help,
    welcome
    Thanks for your time.

    By default the POA expects to find the SDD on the same box as the POA,
    and from that is able to hand out client updates etc. The trick to
    having the SDD on a different server is to give the POA object in the
    eDir tree the rights to the file system where the SDD is...
    On Fri, 06 Oct 2006 19:57:40 GMT, [email protected] wrote:
    >Hello there:
    >
    >There is a couple of POAs running in a two server clustered environment.
    >The Software Distribution Directory is in separate cluster resource other
    >than the POAs resources. When the POA starts the above message is showed.
    >Something I already done is write Netware style "Server/volume:" path in
    >the SDD definition and it works only if the SDD resource is on the same
    >server the POA is running, so when I write Cluster Resource Name style it
    >fails again. Also checked rights and everything as far as I know. Any help,
    >welcome
    >
    >Thanks for your time.
    >
    Tim
    Tim Heywood (SYSOP)
    NDS8
    Scotland
    (God's Country)
    www.nds8.co.uk
    In theory, practice and theory are the same
    In Practice, they are different

  • Help needed: iPhone 4 software upgrade failed many times

    Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
    Help me, please. Thank you very much.

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Diasble your firewall/security software and try again.

  • When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

    When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
    The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
    == This happened ==
    Every time Firefox opened

    If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
    It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

  • Adaptiva Software Distribution not working with Cisco APs in Local Mode

    A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
    First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
    Customer locations with Local WLAN AP design create problems for this new software distribution method.
    The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
    Our WLCs are running at  7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding.  Enabling Broadcast forwarding without Reboot did not improve the situation.
    Global Multicast Mode and IGMP Snooping are also of no influence.
    P2P Blocking Action is "Disabled" within the WLAN setup.
    Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
    Thank You for answers
    Wini

    I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
    Sent from Cisco Technical Support iPad App

  • Still getting "Software Update Failed" when attempting to download iOS 7 on iPhone 4S.

    I've tried countless times now to download iOS 7 on my 4S which is currently running iOS 6.1.3. It downloads completely then in the "Preparing Update..." stage it gives me an error box saying "Software Update Failed. An error occurred downloading iOS 7.0." The same thing happens every time, I've rebooted and reset my pone several times as well as logging in an out of my Apple ID all with no success. It's not like it takes an unusual amount of time downloading or anything, and once it finishes downloading it shows less storage in the "About" section in "Settings" but goes back to where it was once it gives the error message. Just a note, I was able to download iOS 7 on my iPad 3 the day the software was released without a long waiting period or any hassle. I appreciate any input. Thank you.

    Thanks for the response. I have 16.5 GB of available space at the moment. I've tried it connected to a wall charger and connected to my wifi, my schools wifi, and my gyms wifi all with no success. I have not tried it from iTunes but after posting this question a few suggestioned discussions came up, one of which recommended backing up to iCloud or iTune and then performing a complete restore. I'm in the process of doing that now, whether it works or doesn't work I will get back to either way. Thanks again.

  • Software Update Failed An error occurred downloading iOS 7.0

    I can't seem to update my iPad mini.  Looks like the release of iOS 7 just came out and it's not letting me update.  I keep getting a message "Software Update Failed An error occurred downloading iOS 7.0".
    Can anyone from apple tell me why I'm getting this message?  And how to resolve it.
    Thanks for any help.

    The entire planet Earth is trying to download the same thing at the same time.
    Give it some time.   

  • I've been trying for 2 weeks to update my iPhone 4S (7.0.6) to iOS 7.1 OTA but it fails all the time...telling me software update failed..I need some support pls!!

    The problem occurres after the downloading is complete and when its in "Preparing Update" procedure and specfically in its last progress (near the end). Suddenly a message pop ups saying that "Software Update Failed" \n "An error occured downloading iOS 7.1."
    I've restarted the update process for the 20 th time!!! and reset my iphone twice to factory settings, but still nothing change, same error occures...
    My iPhone specs
    Version : 7.0.6 (11B651)
    Model : MD235AE/A

    Did it work for you with iTunes?
    I have the same problem with my iPad mini. I have done almost all updates of my iOS devices OTA.
    I never update issues before.
    Also iPad 2 and iPhone 5 just worked fine.
    Only now my iPad mini struggles with the update. Did a factory reset too.
    And now have iOS 7.0.2 (11A501) on an iPad Model MD543FD/A.
    World prefer OTA instead of iTunes.
    Thank you for any help.

  • I've been trying for 2 weeks to update my iPhone 4S (7.0.6) to iOS 7.1 OTA but it fails all the time...telling me software update failed An error occurred downloading iOS 7.1. ..I need some support pls!!

    The problem occurres after the downloading is complete and when its in "Preparing Update" procedure and specfically in its last progress (near the end). Suddenly a message pop ups saying that "Software Update Failed" \n "An error occured downloading iOS 7.1."
    I've restarted the update process for the 20 th time!!! and reset my iphone twice to factory settings, but still nothing change, same error occures...
    My iPhone specs
    Version : 7.0.6 (11B651)
    Model : MD235AE/A

    Try updating by using iTunes via a computer.

Maybe you are looking for