LMS4.2.2 incomplete pre configured logrotation

Following growing logs exists, but not preconfigured in LMSs log rotation:
ConfigMgmtServer.log
ani.log
ICServer.log
CAAMServer.log
UDM.log
rme_ctm.log
could be getting large after weeks

If you see the mac address in the show mac-address-table command, and LMS is unable to get them, I would open a ticket with TAC.
Since it can read from one VLAN, I fail to see why it can't read from another VLAN.
For the snmp trap mac-notification you must configure LMS to listen for these traps.
It will create a separate trap listener on a particular port.
You must also add a snmp-server host <IP of LMS> <port of mac-trap listener>
Cheers,
Michel

Similar Messages

CS4 Suite (all Windows versions) - documentation of XML and pre-configuration of components?

With a view to packaging and deploying CS4 in Microsoft enterprise environments (ie GPO restricted desktops, mandatory user profiles, non-administrative user base, at or near minimum spec hardware) I was wondering if anyone was aware of any documentation, official or otherwise, for pre-configuration or omission of individual components within the CS4 suite in order to more specifically tailor their operation to user requirements. Eg, such as the way Adobe provide a transform generator/editor for Acrobat in its standalone form.
The instructions for performing silent installs with or without the more major components (such as Dreamweaver, Photoshop etc) work fine, and the Adobe CS4 Deployment Toolkit (aka AdobeUberInstaller) deals with a number of omissions in the base installer such ELUA and updates suppression. However there are various options within the applications themselves I would like to change the defaults for at install time (eg suppress Adobe Bridge from prompting to run at startup, address Acrobat's refusal to run until another element of the suite has been run first etc), patches I would like to slipstream rather than apply retrospectively (currently Air, Indesign, Photoshop), and some elements (such as foreign language components and 64bit support) I would ideally like to omit from the source package altogether to keep the size down - 6GB+ to 500 clients is quite an ordeal!
Web resources such as application deployment forums have allowed me to address some of the above, but I would be very interested in the feedback/experiences of this community. I appreciate what I'm asking is somewhat vague but any crumbs of wisdom all add up...
Many thanks in advance for any suggestions.
Bill

The best is to get the versions in which you have developed/tested. These can be found in MAX under Software, if it is possible provide a link to the NI ftp download URL.
Then export the settings in MAX (for tasks/scales) if you use them and provide a simple app that loads these items into MAX.
For RIO I'm not totally sure but I would create 'Getting started' that outlines what settings (IP/DNS etc.) to get the user started.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How Can I pre-configure the proxy settings in Acrobat 8?

We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

How can I install a Designer 6.0 pre-configured repository ?

Hi:
I am trying to install Oracle Designer 6.0 to my client machine (Windows 2000) and server machine (Windows NT 4.0), what I did was:
[1]install Designer 6.0 client side on my client machine.
[2]install Oracle 8i Enterprise Edition (version 8.1.7) on the server machine.
[3]configured SQL*Net Client and NET8 on both client and server, and it works fine.
[4]install pre-configured repository using Oracle Designer 6.0 CD #2 (pre-configured repository),but it always gives me such info:
" You have not installed a local copy of Oracle8 Enterprise Edition, therefore, Oracle Designer and ODD D7O4 Preconfigured Repository can not be installed. Please re-install this product after the local
database has been installed."
It seems strange, I did install 8i Enterprise Edition (I even installed Oracle8 Enterprise Edition) before repository, I should have
a local database.
How should I do next ?

Hi Zhu:
Now that you are trying to install Designer, your problem is easy to solve.
I think you should download Oracle Designer 6i Release 4 for Windows from http://otn.oracle.com/software/products/designer/software_index.htm and then do your install again.
The install and the server side setup maybe time consuming, but I am sure you can do it.
You may install Designer 6i Release 4 in the following steps:
(Before do these, uninstall your Designer 6.0 both from your client machine and Windows 2000 server using Oracle Installer)
Step 0: download Oracle Designer 6i Release 4 from OTN to your local directory, say c:\temp and unzip it to c:\temp\Designer6iR4. I will refer this directory as installation media. Make sure that you have equipped your server machine with at least 256MB memory. In my experience, 386MB is better and 512MB is recommended.
Step 1: make sure that one database was created in your installed Oracle 8i. If not, create a database at this step. The parameters of this database should be adjusted according the needs of Designer 6i. You will be told how to do this later.
Step 2: install Designer 6i R4 from the installation media to server machine. Pay attention at this step that you should "select to install both Designer and Repository." It is recommended that Designer should be installed to another new ORACLE_HOME. Don't install it to your Oracle database home. Say, to the ORACLE_HOME "DESDEV".
Some more words need to be said here, I think, about the ORACLE_HOME for Designer. Later if you install Oracle Developer into the same machine as Designer is installed to, both the Oracle Developer and Oracle Designer should be installed into the same ORACLE_HOME. So the name DESDEV stands for "DESigner and DEVeloper are both installed into the same Oracle home named DESDEV". This will be prompted to you just after the installation of Designer was finished.
Step 3: print out "Oracle Repository/Designer Installation Guideh from "Stat->Programs->Oracle Repository 6i Doc - DESDEV". I will refer this material as gManualh from here till the end of our talk.
Step 4: shutdown your database if it is running and then set the parameters to the correct values (required values) according to gCheck the settings in the Oracle initialization parameter fileh in the Manual, Chapter 2 Server-side installation, migration and upgrade.
Step 5: startup the database and then check the parameters. To do this, you need to login to database as user sys and then issue the command gshow parametersh. If all the parameters are correct you may go step 6. You may leave the database running.
Step 6: make sure that the database is running. If not, startup database here. Before proceed to install Designer 6i Server-side, the database should in running status.
Step 7: do the server-sidefs install of Designer 6i (that is, Repository) according to gChapter 2 Server-side installation, migration and upgradeh in Manual. In that part of manual, 17 steps of installation and setup Designer 6i server-side were mentioned. I am sure you can manage that with ease.
Step 8: install Designer 6i client-side into your client machine according to hChapter 1 Client-side installationh in Manual from the installation media.
By the way, I should tell you how much time it takes to accomplish all of these steps IF things were went smoothly: it took about 6 hours for me to have all these steps done. And my machinefs specifications is:
CPU 633MHz
RAM 512MB
Wish you good luck
null

Unable to edit the MobileXI3BB.jad file for pre-configuration settings

According the Note:1542478 - How to pre-configure connection settings for BusinessObjects XI 3.1 Mobile clients?
We are trying to edit the MobileXI3BB.jad file to avoid the Config seeting from client side.But wonder we are not able to see the below details in our MobileXI3BB.jad:
BOBJ_MOBILE_AUTH_SERVER: <mobile server>
BOBJ_MOBILE_AUTH_PORT: <Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS: <cms address>
BOBJ_MOBILE_AUTH_METHOD: <authentication type>
Can any one help us how to solve this?
Edited by: Srikencha on Jun 3, 2011 8:58 AM

Hi,
you won't see this code,you need to add this code to the MobileXI3BB.jad file
BOBJ_MOBILE_AUTH_SERVER:<mobile server>
BOBJ_MOBILE_AUTH_PORT:<Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS:<cms address, for example CMSCOLPAL:6400>
BOBJ_MOBILE_AUTH_METHOD:<authentication type> where <authentication type> could be any one of these values based on your requirements: secEnterprise, secWinAD, secLDAP, secSAPR3.

[Desktop] Pre-configured installs

Any suggestions on how to create pre-configured installers of the same base app? Here's an example of what I mean:
App: This base app connects to a configurable server domain. You could install and use this app just fine.
App for ClientX - This app should connect to serverX, and I want to pre-configure it to do so. It may also have custom configured branding for ClientX.
App for ClientY - This app should connect to serverY, etc.
So I want to be able to give ClientX an installer (or install link) that installs the App pre-configured to connect to their serverX, and I want to give ClientY an installer that connects to their serverY, but I want both to be the same application, built from the same codebase, with the same appID and certificate, and receive the same updates, etc.
I've considered using compile constants to create different AIR app versions with populated strings, which I think would work though a bit clunky, but would result in different versions of the app, when what I really want is to have the SAME version configured differently.
What I am currently doing is making a config file that can be shared, so the main app is installed then the client opens the config file with the app (file association makes this relatively easy, but still very manual feeling.) I would essentially like to automate this, so the end user only needs to run the installer.
The next step would be automating this process, so that when ClientZ purchases the app it uses ClientZ's information to provide an installer configured for ClientZ without manual human intervention. You know, for when my app inevitably gets famous and makes me rich.
Any suggestions?
Thanks all!
-Aaron

Well I'm not quite sure this fits your scenario but maybe (assuming your clients install your app from a website)...
You can use the swf (badge) method of installing AIR apps through the browser: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7e15. html
This would give you the ability to pass in arguments into the install process. http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a5d46-8000. html#WS5b3ccc516d4fbf351e63e3d118666ade46-7e19
Basically you set your air app to "<allowBrowserInvocation>true</allowBrowserInvocation>" and add a listener for the BrowserInvokeEvent(not InvokeEvent)
Do what you want with the parameters (maybe save to a flash shared object) to remember who it was.
Then for distribution, provide a client only page, that passes flash vars into the badge swf, which passes them to the app for install.
I recently used this method in this way. I'm building a video conference app that can send invitations via a URL (videoapp.com?id=abcdefghijklnop).. On that page I have the badge (swf) that recieves that invitation through flash vars. The badge does the install of the AIR app and passes the invitation once it runs.
Note: I had to modify the default badge.swf to include my additional flash vars.
Other than this, I dont know of any way to add arguments to just a regular passed around .air file.

Pre-Configure QT 7 Installation for only specific file types

Is there an 'ini' or similar configuration file or command line option set I can use to pre-configure QT7 to only associate with specific file types?
I want to leave the associations for Media Player intact and have QT handle only MOV and other Apple-specific file types.

Basic answer. No.
You set file associations after the install of QuickTime.
Most of it's adjustments and options are found in its Control Panel. Here you can set associations for MIME types that control the browser plug-in.
Each user can set their own values.

Pre Configured Repositories

Hi,
I have just started working in MDM and facing initial hiccups.
In my earlier version of MDM ie SP3 , we couldnt see the pre configured repositories(Material,Customer etc) in the MDM Console, but now we have just upgraded from SP3 to SP4 but still those repositories are missing.
I would like to know if there was something missing during installation due to which they havent been imported ????
In SP4 we have the functionality of Importing Repository thus ifa direct link to where I can find them and import them into my Console would be of great help.
Thanks in advance!!!
Regards
Gaurav

Hi Anand,
SAP delivers out of the box content for these repositories in SAP Market place.
http://service.sap.com/swdc
Entry by Application Group ->Entry by Application Group->
Support Packages and Patches->SAP NetWeaver->SAP MDM" SAP MDM 5.5-> Master Data Server->MDM BUSINESS CONTENT 5.5->#OS independent->MDMBC55004P_3-10003437.ZIP
Regards,
Fereidoon

Pre-configured dual-boot Ubuntu and Windows

Of possible interest to the Linux folks: A newly opened Laptops with purpose store is now offering several popular ThinkPad models fully pre-configured with dual-boot Ubuntu Linux and Windows.
These systems come with a lot of pre-installed applications, see Dual boot Linux and Windows page for details.
At the moment, we are working on specific solutions for students, educators, scientists, designers...
Would love to have some feedback from the community on the existing offerings as well as suggestions/wishes for the future ones.

That would be fine if some hp machines didn't have broken UEFI that don't respect setting the default OS.

Pre-configured smart forms

Hello
I am trying to find out where I could download pre-configured smart forms for sales order confirmations? We are in a 4.7 system. I searched service.sap.com and could not find the download. Thanks.
Jack

Hi,
for order conformation form
Print program : RVADOR01
you have to create smartfrom and assing this fom into NACE in Application V1
Regards,
Vijay
Edited by: vijay kumar pamulapati on Aug 19, 2009 8:19 AM

Pre-configured standalone OC4J with PDK - ZIP corrupt - ??

zip is corrupt, what can I do, who can I contact??
pre-configured standalone OC4J with PDK
http://www.oracle.com/technology/products/ias/portal/files/pdk_oc4j_extended.zip
found at page http://www.oracle.com/technology/products/ias/portal/pdk.html

Sorry for the multiple occurences of this posting, Got an error during posting!

Pre-configured RF Transactions

Hi,
Could anyone provide me with the link to download pre-configured RF Transactions (Warehouse Management)?
SS

Atul,
We are experiencing this same problem with one of our users. Every time the user logs into the system this error immediately displays as the first screen.
Did you ever find the cause of this message?
Thank you
Terry

Pre configured client

Hi Team
There is a business requirement to install pre configured client of SAP (ECC) for US region
So requesting you to guide me where can I get the transport request for pre configured client
Regards
Gopal Gangane

Gopal,
If you are asking this question, then you probably shouldn't be installing this package on your own.
There are basic installation instructions for all SAP software, and there are specific implementation guides for each package. Normally, this task is performed by a Basis expert.
If you wish to try anyway (I don't recommend this), then all the information you need is either on the BP web site, or links exist on this site to direct you to the info you will need. If you are downloading a baseline package, start here http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000728648& select the one you want. There is an info button, and a download button. Click on the Info button, which will take you to BP docs for the package you have selected. Read ALL, especially the stuff contained in the 'Explore and Evaluate' section.
Better, though, to hand the links and files to your Basis person and allow them to install.
Best Regards,
DB49

Pre-configured MI Client

Hi MI guys,
is it possible to create a pre-configured MI client for deployment?
Question 1:
I want to set the right servers and some other configuration for the standard MI client so that the users don't have to enter something during installation?
Question 2:
What about using a deployment software like enteo Netinstall for installing a basic MI client? My thoughts are, I install and configure a MI client without synchronizing and this will be deployed via Netinstall on the client device (without installation routine of MI client).
Thank you and regards,
Florian

Hi Florian,
The short answer to both of those questions is "yes".
In our environment we used "Wise for Windows" utility to install SAP MI client with required parameters (IP address, SAP system ID, etc.), and then compile new .MSI package with pre-setup parameters.
And yes, we are able now to install it automatically now for our clients via Script Logic. It uses MSIEXEC on the background with "/quiet" option enabled and because of pre-configured settings, no input from end user is required during install process.
I think it should work properly with the other deployment tools, as they uses the similar logic.
Hope this answers your question.
Best regards,
Laziz

Pre-configured Roles

Hello,
is there any summery of all the pre-configured Roles with its Role_ID and a description of each role?
Best Regards,
Sandra

Hi Sandra,
You should have a look <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f6/26057105fd11d7b84200047582c9f7/content.htm">here</a>, this should answer your question.
Hope this help
Vincent

LMS4.2.2 incomplete pre configured logrotation

Similar Messages

Maybe you are looking for