LMS4.2 admin username cannot login

Hi,
I have installed LMS4.2.2 on Windows 2008 server and am unable to login via the 'admin' username. I get "Invalid Username or Password. Please try again" error message. I can successfully login using Windows AD username and password.
I have reset the password for 'admin' username with the following:
nmsroot\bin\perl.exe resetpasswd.pl admin
Server has been rebooted PRE and POST password reset. What else can/should I do?
Thanks,
Vineet

Hi Vineet,
I was facing similar issue, I was installing the same on VM... This is what i did to resolve the same
I re-installed the LM4.2 this time i did not change the default sysadmin name gave a password then gave a different password for GUI admin which is prompted after sysadmin. Once the installation was complted used the username 'admin'(this is the default GUI username) and the password given for GUI admin for log-in.
http://x.x.x.x:1741.
Hope this helps !
Regards,
Vinu

Similar Messages

Users (admin user too) cannot login to Xserve with OS X 10.4.11

The admin user cannot login into the login window directly on the server, I tried Using the install CD, and changing the root and admin user password and SSH from a terminal MacBook Pro with the command line: "ssh root@XXXXXXXX", it seem like is blocked or maybe the user expired.
The system: Weblogs, QuickTime Streaming, is working fine. I have connected (optical fibrer) a Xserve Raid and is working too.

This is not a direct solution, but might help you see what is going on. Check out this webpage with instructions how to get to the console screen from the login window - http://www.macosxhints.com/article.php?story=20020318020806482

Why cannot login to weblogic admin console . no error.

Why I cannot login to weblogic admin console. I keep getting login screen. I reset the userid and password but still cannot login
Here is what's in the log file:
Sep 26, 2010 8:55:14 PM EDT> <Warning> <HTTP> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914272> <BEA-101296> <Unable to load the default compiler class "com.sun.tools.javac.Main". Using the default javac compiler to compile JSPs.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914319> <BEA-000365> <Server state changed to STANDBY>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914335> <BEA-000365> <Server state changed to STARTING>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <SAFService> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-281003> <SAF Service has been initialized.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <SAFService> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-281002> <SAF Service has been started.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <WseeCore> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-220502> <The Wsee Service is starting>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Deployer> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914366> <BEA-149209> <Resuming.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Diagnostics> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-320000> <The Diagnostics subsystem is initializing on Server myserver.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Store> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\mydomain\servers\myserver\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Store> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (430fff8d-1448-4efe-ae57-8e17de6fd97a) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Log Management> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914429> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\mydomain\servers\myserver\logs/mydomain.log.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Log Management> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914429> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Diagnostics> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914507> <BEA-320077> <Initialized the Diagnostic Accessor Service.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914538> <BEA-000365> <Server state changed to ADMIN>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914569> <BEA-000365> <Server state changed to RESUMING>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Management> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914663> <BEA-141052> <The auto deployment poller has started.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002610> <Dynamic Listener Service initialized.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002613> <Channel "Default" is now listening on 172.16.37.59:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-000331> <Started WebLogic Admin Server "myserver" for domain "mydomain" running in Development Mode>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914741> <BEA-000365> <Server state changed to RUNNING>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914741> <BEA-000360> <Server started in RUNNING mode>
####<Sep 26, 2010 8:55:15 PM EDT> <Info> <J2EE> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548915429> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<Sep 26, 2010 8:55:15 PM EDT> <Info> <EJB> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548915569> <BEA-010008> <EJB Deploying file: mejb.jar>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916085> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916179> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916194> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916194> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916210> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916210> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <EJB> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548916288> <BEA-010009> <EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.>
####<Sep 26, 2010 8:55:27 PM EDT> <Info> <WorkManager> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548927226> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
####<Sep 26, 2010 8:55:28 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548928226> <BEA-423101> <[console] Initializing the NetUIx container>
####<Sep 26, 2010 8:55:28 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548928523> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [console//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
####<Sep 26, 2010 8:55:29 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548929164> <BEA-423101> <[consolehelp] Initializing the NetUIx container>
####<Sep 26, 2010 8:55:29 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548929195> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [consolehelp//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
####<Sep 26, 2010 8:56:14 PM EDT> <Info> <Health> <TAXWARE_TEST> <myserver> <weblogic.GCMonitor> <<anonymous>> <> <> <1285548974540> <BEA-310002> <86% of the total memory in the server is free>

There is no error. Is there another domain on your OS? can you please put here your config.xml file and your login screen image here.
May be you use wrong console to login.

WISM2-Cannot Login via WEB

Hi everyone
I cannot login the wism2 with browser.
But I can use command to login the wism.
like this:
VSS-6509#session switch 2 slot 9 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 172.16.31.2 ... Open
User:admin
Password:*********
(WiSM-slot41-1) >
notice:Sometimes I can login via the web.The interface and ip address configuration were correct.
WISM2 log:
*emWeb: Mar 08 05:20:38.189: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 05:04:38.105: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:48:38.032: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:32:37.951: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:16:37.861: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 04:16:37.861: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:00:37.780: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:44:37.708: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:28:37.623: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:12:37.550: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:56:37.482: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 02:56:37.482: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:40:37.396: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:24:37.308: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:08:37.191: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:52:37.103: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:36:37.022: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 01:36:37.022: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:20:36.951: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:04:36.853: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 00:48:35.253: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 char

You have radius setup for managment? If you have radius setup, make sure you don't have the managmeent check box enabled unless you are using TACACS or Radius for management users. Seem's like radius if sending a reject back to the WLC.

Cannot login OEM

Hi guys,
I can login the database successfully by using sqlplus system/oracle as sysdba,
however, I cannot login the OEM by using the same username and password.
Any solutions?
Thx,

[db11g@localhost ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-JUL-2011 23:25:12
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-JUL-2011 22:23:27
Uptime 0 days 1 hr. 1 min. 45 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/app/db11g/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u02/app/db11g/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "ocp11g" has 1 instance(s).
Instance "ocp11g", status READY, has 1 handler(s) for this service...
Service "ocp11gXDB" has 1 instance(s).
Instance "ocp11g", status READY, has 1 handler(s) for this service...
The command completed successfully
[db11g@localhost ~]$ lsnrctl service
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-JUL-2011 23:25:19
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "ocp11g" has 1 instance(s).
Instance "ocp11g", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:78 refused:0 state:ready
LOCAL SERVER
Service "ocp11gXDB" has 1 instance(s).
Instance "ocp11g", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: localhost.localdomain, pid: 8626>
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=16729))
The command completed successfully
[db11g@localhost ~]$

Creating Admin username in ISE using CLI

Hi All,
Can we able to create an admin username and password with role admin in the cli.
I have access to the cli using a user account and I was trying to create an admin username and password.
I have created one but i cannot access using those credentials.
I read in a doc, admin can reset only via booting from iso image.
Kindly advice, on this.
Thanks
rYs

Hi riyasrasheed,
You can create an admin user from CLI.
Once you logged into ISE CLI with admin credentials you have to follow below syntax to create another admin user.
isevm225-pod2/naresh# configure
Enter configuration commands, one per line. End with CNTL/Z.
isevm225-pod2/naresh(config)# username demouser password plain default1A role ?
admin Specifies user with administrative role privileges
user Specifies user with read-only role privileges
isevm225-pod2/naresh(config)# username demouser password plain default1A role admin
isevm225-pod2/naresh(config)#
Exit and try to login with newly created user and password.
Thanks,
Naresh

Cannot login to network account (leopard client and server)

Up until now, I have used local accounts on my leopard server. I want to start experimenting with OD prior to implementing. I created a new user account in the /LDAPv3/127.0.0.1 domain, and have bound my leopard client to the server using directory utility. On the login screen, "Network Accounts Available" has a green button to the left of it. When I try and login to the server account, the login window just shakes. At first, I could enter the password and then it would prompt me for a new password. Trying to enter a new password would not allow me to login. I went back to server admin and disabled the "require new password" setting, (as well as the other good security policies)...
I have also reset the password in WGM, and made sure to disable all the security stuff there too...
Lastly, I have deleted the server in directory utility, rebooted, then added it back in, and rebooted again...
I still cannot login to the server account, the login screen just shakes
Does anyone have an idea of what settings and or logs I can check to try and narrow down what is going on?
Thanks in advance....

to close out the thread, I have working dns on my network, but I did not have dns enabled on my server. I enabled the dns service and entered just the info for my server, then assigned my server and client to use the server's ip addy as the primary dns server. Next, I created the home directory.
Once both steps were done, I was able to log in from my client to my server based account...
FYI-I found a document on afp548.com called "leopard server: advanced setup, rsync backup and automated reporting" that walks you right thru the process...Here is the link, it's a very useful doc....
http://www.afp548.com/filemgmt_data/files/Leopard%20Server%20Quickstart%20Guide. pdf
thanks again boomboom_uk and woVi, your suggestions were spot on....

Cannot login with AD credentials on iMac

Greetings:
I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been working flawlessly until today. I can bind to AD no problem. When I go to login with my known good account, I just get the window shake. Logging in with a local account, I see error messages in the console of:
DNS Update Failed & Enter Machine Password
The machine account is already staged in our OU. I am not clear what the DNS error is alluding to.
reading through these postings: http://www.macwindows.com/snowleopardAD.html
I tried disabling creating mobile accounts at login. However that did not fix the issue.
I believe our campus is running Win2K8 AD servers. Our campus DNS appliance is a separate box, but should know how to delegate to AD (?). The other 10.6.3 machines we have, are authenticating against AD fine.
Any ideas?

Marcus is correct - the ZAM administration accounts (ZAM 7.x) are stored (encrypted) within the ZAM database.
Within ZAM 7.x there is no way to integrate this with AD (either by LDAP referral or some kind of identity / password sync) and AFAIK no plans to add this.
I believe in the ZCM version of asset (and I hope the standalone version of ZAM10 still in dev) you set up the AD account(s) that is/are allowed Admin etc. access within ZAM, then LDAP referrals are used to authenticate via AD. I don;t know this for sure, though.

Cannot login via ssh/sftp from certain clients

Hi Guys,
Strange issue here. I have a machine running 10.7.4 that I want to be able to access via sftp/ssh.
I can login into the machine in terminal using either ssh or sftp.
I cannot however login to the machine from finder via sftp. I am just told the username/password is wrong.
Equally I cannot login to the machine from certain clients on my android phone (the main reason I need sftp)
I can however login from cyberduck on the other machines I have, and from some clients on my android phone.
When a mac is denied access it gives authentication failed as the reason, when a android client is denied access it gives network communtaction issues as its reason for failing, not authentication.
From memory these issues started when smb broke for me in 10.7.3.
Can any one shed any light on this?
Cheers

bump

Cannot login with Active Directory Account

Hello,
I am testing SnowLeopard (10.6.1) for deployment in my labs for the Spring 2010 semester. We use local home directories. This is a brand new fresh install of SL, on a freshly formatted Hard Drive.
When bound to Active Directory I can get any AD account that I've tested (5 different accounts) to authenticate except one, which happens to be my own personal AD account.
The secure.log shows these entries when I attempt to login:
Oct 9 14:18:29 mac-0017f20fc40 SecurityAgent[209]: User info context values set for ctarbox
Oct 9 14:18:29 mac-0017f20fc40 authorizationhost[208]: Failed to authenticate user <ctarbox> (tDirStatus: -14090).
Considering that I could log in with other accounts, and after resetting my AD password then still not being able to authenticate, I came to the conclusion that I had a corrupt OU in Active Directory.
I contacted one of our AD admins and had him delete both of my AD accounts: ctarbox and ctarbox1 then recreate both accounts. I still cannot login to AD with my ctarbox account.
I can still login to my current lab machines anywhere on campus running 10.5.8 with ctarbox.
I am baffled by this. I have been authenticating to Active Directory since 10.1 and have never seen anything like this.
Any idea, anyone?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University

I have found the solution to my problem. I have accounts in two different domains in our AD tree. I'll called these domains Domain A and Domain B.
Domain A is the primary domain for authentication to our public computing labs.
Domain B is a secondary domain for authentication to shared resources for faculty/staff.
Both accounts have the same user ID, but different passwords. In my Directory Utility>Advanced>Administrative window I have the option "Allow authentication from any domain in the forest' checked.
With this option checked Directory Utility in 10.6.1 will allow me to authenticate Domain B, but not Domain A.
With this option checked in Directory Utility in 10.5.8 just the opposite is taking place, I can authenticate to Domain A, but not Domain B.
It seems that somewhere in the upgrade to 10.6.1 the search policy for Active Directory has changed. My workaround is to uncheck this option and specifically choose Domain A in the search policy.

Cannot Login to Read Only Domain Controller

One of my Read Only Domain Controller Servers shut down unexpectedly due to a power outage and now I cannot login to it anymore. When the server powered on again, it came up with an error regarding on of the hard drives failing (RAID1)
I get a message Access is Denied when I try to login with one of my domain admin accounts. As it is a RODC, there are no local accounts for me to use. The RODC is running on Windows Server 2008 R2. The server is also running as a DHCP/Print/File server for
the office so these are not working as well.
I checked my PDC and it is coming up with the following error in the event viewer
Log Name: System
Source: Security-Kerberos
Event ID: 4
Level: Error
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server rodc01$. The target name used was domain/rodc01.domain.local. This indicates that the target server failed to decrypt
the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account
used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the
server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (domain.local) is different from the client domain (domain.local), check if there are identically named server accounts in these
two domains, or use the fully-qualified name to identify the server.
I have tried to reset the computer password with netdom but I get the following error
netdom resetpwd /server:rodc01 /userd:administrator /passwordd:*
The machine account password for the local machine could not be reset.
Logon Failure: The target account name is incorrect.
The command failed to complete successfully.
If I try to reset the password using the IP address instead, I get the following error
netdom resetpwd /server:192.168.10.1 /userd:administrator /passwordd:*
The machine account password for the local machine could not be reset.
Access is denied.
The command failed to complete successfully.
I checked my AD and DNS and the rodc object is present
If I run repadmin /replsum on the PDC I get the message for the faulty RODC server
Experienced the following operational errors trying to retrieve replication information:
8341 – rodc01.domain.local
Any advice is appreciated
Thanks

Logon to the server in Directory Services Restore Mode (DSRM) using the password you supplied during DCPROMO and verify that the Active Directory database isn't corrupted on the RODC - You will most likely see indications on this in the Directory
Services log.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Cannot login to .me or .mac accounts on ichat

Hi,
I am using OS X mountain lion 10.7.5. When I recently updated my software, it asked me to install ichat (which I did). My problem is that I cannot login to either .me or .mac accounts to see my contacts. I use the same username and password as the one I used to login in to apple's store and itunes. None of them work. How can I log in to these account to get my contact list? I should mention that I can login to icloud just fine as well as all other apple sites and services except ichat.

Hi,
This thread is iChat and tagged with "iChat".
You mention you have Lion which would be iChat 6 and the Message Beta has run out now.
From there I surmised you were logging your AIM valid Apple IDs into the AIM servers.
Nothing has happened to any or all of your iMessages contacts (Unless you have deleted your Address Book)
However you do now need Mountain Lion to login to the iMessages servers (and the Messages app that does that bit for you).
10:24 PM Friday; December 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Cannot login to any accounts anymore...

I have my latest MacBook Pro for over 2 years on one user account. Every time I boot up I just enter my password and get started. Today, however, I received a login with my computer name and nothing in the user or password fields. I have tried every combination I can think of and nothing works.
I have a system disk from the purchase, but it's damaged. I used another system disk (10.4) from my prior macbook, and booted. Tried to change account password but doesn't see my HD, only the startup disk (my current os is 10.5). I does see the HD and allow disk utility, etc.
Very frustrated I cannot login at all even though I know my admin/master password (not sure what the login or short name was though).
I am contemplating re-installing the OS back to 10.4 but obviously fear losing my apps/data, etc.
Please offer suggestions!

HI,
Go to /Library/Preferences and move the com.apple.loginwindow.plist file to the Trash. Restart your MacBook. If the login window is still a problem....
I have a system disk from the purchase, but it's damaged. I used another system disk (10.4) from my prior macbook, and booted.
The disc(s) that come with your Mac(s) are machine specific meaning one won't work on another.
You can run Disk Utility by booting in Safe Mode You can Verify the startup disk in Safe Mode, but not repair it. You need the install disc that came with the Mac you are having problems with to do this.
What is Safe Mode
Carolyn

Cannot login into network accounts when there is no network connectivity

Hey guys
quick question here if anyone can help.
What has been done: backuped user's home folder, binded the mac to AD, logged in as the user's AD name, copied everything from the backup into the new user's home folder, users can work flawlessly.
What is wrong is when they leave the office, after a few hours they cannot login anymore to their AD username. Is there something i missed?
The network accounts do not appear in system preferences.
Thanks

On your client machine login screen, type in ">console" (without quotes) in the username field and hit enter. Try and login with your network account username and password. What error messages do you get in console?
Taylor

Cannot login, and lots of more of these problems

I used to use the HP eprintcenter. This used to work properly.
Then it changed into HPconnect. The worst site I ever seen. Let me sum up:
1) I cannot login... Initially I used Chrome as a browser, but his does not work, so HP does not know there are other browsers than stupid IE.
2) then I used IE, There I select login and give my credentials. There it says I am already HP connected. Press the button below. "Go to HP connected". But when I do so, it is returning to the previous web page. I am simply turning circles.
3) Then I pressed HELP, and was directed to a forum. Guess what? it asks me to create a new account. Don't I have enough accounts already??? Why can't I use my HPeprint account??? But ok, once more.... I tried at least 15 different user names, but without success... turning circles again.
4) then I arrived on this forum. There is a special section on "how to use this forum". Dear HP, if you need to explain how it works, then it sucks. Make things easy, so you don't need to explain why you made it complex.
Can someone give me my old HPeprintCenter back or tell me how you can simply, with a single username and password and with whatever browser I like I can LOGIN to this stuff to see if it is really worth going through this misery???

Hi 1f3,
I'm sorry to hear that you are having issues when you migrated from HP's ePrintCenter to HP Connected.
HP connected as been rolled out to the USA and the UK, all other countries/regions at this time are still using HP ePrintCenter. As for not being able to sign into ePrintCenter I have included a link to one of my posts here on the forum for those customers that seem to be stuck in a loop when trying to log in.
The easiest way to get your printer onto your new HP Connected account is to reset the web services on the front panel of your printer. I am unable to link you to the instructions on this as you didn't indicated which model/product of HP printer you have. After resetting the web services you will get a new claim code to add your printer to your HP Connected account. Please be advised, if you reset the web services, you will lose your current ePrint email address, and you will need to create a new email address for the printer.
If you still need to have an account deleted that you are unable to log into, please feel free to contact HP Cloud Services at 1-855-785-2777. If you live outside the USA/Canada region, please click the link below to get the Technical Support number for your region.
HP Support Forums post by Happytohelp01
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Cannot-sign-in-to-hp...
HP Support
http://www.hp.com/cgi-bin/hpsupport/index.pl
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

LMS4.2 admin username cannot login

Similar Messages

Maybe you are looking for