LMS4 - overview about all devices and their user defined groups

Hello,
How is it possible to generate a report to get an overview wheather all devices matches in their intended user defined groups?
For instance this style:
name   mgmt-ip   user-defined-group-name
Cant find OGS attributes in report generator.
thx for hints, Steffen

Do publish the rules you use to get he devices.
What is the parent group of your devices
Cheers,
Michel

Similar Messages

  • Prime Infrastructure 2.0 Importing user-defined group rules

    Dears,
    I'm looking for a way to import rules to put devices in a user defined group.
    I can see how I can create groups and rules manually, but not how I could export or import those rules.
    Is this possible, or on the roadmap?
    Cheers,
    Michel

    In the Cisco Prime Infrastructure 2.0 Deployment Guide under LMS 4.2 Data Migration there is a way to import settings from a "special" backup made from LMS.
    This should allow for importing userdefined groups.
    Does anyone have tried this yet?
    Cheers,
    Michel

  • My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call  i recive massege and the device donot close by itselfe

    My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call  i recive massege and the device donot close by itselfe

    LadySarah
    You cannot upgrade from v6 to v7 without purchasing iLife 08.
    Can you give more details about your crashing issue. Make of camera etc.,
    You can start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD
    Regards
    TD

  • TS4009 How do I clean up mail in my icloud?  I have already deleted old mail on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much roo

    How do I clean up mail in my icloud?  I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room).  When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room.  Is there a way to actually log on to the icloud server to manage what it stored there?  If so, how do I do it?  Also, on a related subject,  why does my mail not sync accross all devices?   ie. when I delete an email on one device, why do I still see it on all my other devices?  How can I change this?
    I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem?  Looking to upgrade to a Mac sometime this year...
    Thank-you for the help!

    beckyfromoz wrote:
    I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday.  They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
    Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • Report to list all computers and their collection membership

    Hi
    I am currently working on a site where direct membership is used for collections but a need has arisen to move to AD Queries.
    I have created a simple powershell script that creates groups based on the contents of a csv file and another script which populates this with the members listed in another csv file.
    To help speed up the process is there a way to generate a report that lists ALL Computers and their Collection membership?
    The only reports I seem to find that are built in require an inputted value of either computer name of collection ID. I simply need a report that lists Computer Name is column 1 and Collection Name in column 2 for all computers and all collections.
    Many Thanks,
    Matt Thorley

    select 
    FCM.Name,
    C.Name
    from 
    dbo.v_Collection C
    join dbo.v_FullCollectionMembership FCM on C.CollectionID = FCM.CollectionID
    Thanks to Garth for original query. I just modified it :)
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Is there any table in data dictionary has all clients and their email ids?

    Is there any table in data dictionary has all clients and their email ids?

    Hello,
    KNVK-ADRNP_2
    use this to pass to the bapi BAPI_BUPA_ADDRESS_GETDETAIL. this is function module & will return the address details in diff itabs..
    You can also try the Table ADR6 field SMTP_ADDR where ADDRNUMBER = KNVK-ADRNP_2.
    *************Reward points,if found useful

  • Needed info about io devices and cpu without using prtdiag

    Hi
    I need to collect info about io devices and cpu. but i cannot use prtdiag.
    is there any way to collect this information on solaris machine....
    may any available c APIs
    Thanks in advance.
    Nagesh

    yep.... prtconf -vp | grep <wot u r looking 4>

  • Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad calendars. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    On the iMac open System Prerferences > iCloud
    Deselect the box next to Calendars then reselect then restart the iMac.
    On the iPad, tap Settings > iCloud
    Switch Calendars off then back on then reset the iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    Hopefully the event synced over all the devices.

  • Command to  provide list of all objects and their scripts from database

    Hi,
    How do i get the list of all objects and their scripts/source from database?
    I guess using dbms_metadata package or Toad tool we can achieve the above task
    But i do not know the steps to get the objects and their scripts.
    Im using oracle database 11g R2 11.2.0.2
    Kindly ge me the advice
    Thanks in Advance

    How do i get the list of all objects and their scripts/source from database?
    I guess using dbms_metadata package or Toad tool we can achieve the above task
    But i do not know the steps to get the objects and their scripts.
    Im using oracle database 11g R2 11.2.0.2If you want the all the metadata of whole database, then it is quiet difficult to get from DBMS_METADATA, as it is very complex because you need to gather for each object of each schema in whole database and to spool.
    http://www.orafaq.com/node/57
    I want to know, what is the use of entire database metadata, Certainly need of objects of metadata.
    or if you want to whole database, then i suggest you go for export full backup and import as impdp sqlfile option,

  • How do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?

    how do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?
    I saved a corrected, most up to date version of my master Address Book Contacts as a back-up on my Mac Book Pro.
    then in an effort to "simplify my life"  i attempted to sync my I phone contacts - ( pre clean-up version) with my clean list on Mac Book Pro, New I pad and newly available icloud. DUH!! Using iTunes to do the sync caused the clean MacBOOK Pro list to be commingled with the dirty iphone contacts. amd now the whole mess is in the cloud. 
    I need to clear out the contaminated lists from all iplaces, and startover with Back-up on my macbook pro. BUT HOW???
    Help
    Karen

    I had exported an address book backup: abbu
    so since i wrote, i have found my way into the cloud: selected all entries - deleted them all from the cloud.
    This wiped out contacts on my iphone and i pad, and MBP, as well as on the cloud.  I then imported the abbu back into my now empty address book. 
    To repopulate the crowd, i selected all in my address book and created a single card vCard for export to my desktop.  I then dragged that vcard into my empty cloud.  Now my cloud has the same clean contacts as my MBP addressbook.  The cloud then pushed the clean contacts into my empty ipad and iphone contacts. 
    I had to go back to Address Book>preferences>Accounts and Add an I cloud account - but if you accidentally create a second i cloud account - all of a sudden your address book will duplicate itself.  I quickly reversed it by deleting one of the icloud accounts in my Address Book>preferences>Accounts. 
    I created a new entry on my MBP and it is now on all devices and in cloud
    I also created a new entry on my iPhone and it is now in the address book on my MBP.
    I feel empowered!!
    Have i missed anything??

  • Define and assign user authorization groups in FI

    Hi All,
    In order to allow some specific group of users to post in AUGR allowed periods, how do I define and assign user authorization groups in FI?
    Thanks,
    Teo

    Hi Teo,
    Here i am giving some authorisations in fi
    F_AVIK_BUK FI Payment Advice: Authorization for Company Codes
    F_BKPF_BED FI Accounting Document: Account Authorization for Customers
    F_BKPF_BEK FI Accounting Document: Account Authorization for Vendors
    F_BKPF_BES FI Accounting Document: Account Authorization for G/L Accounts
    F_BKPF_BLA FI Accounting Document: Authorization for Document Types
    F_BKPF_BUK FI Accounting Document: Authorization for Company Codes
    F_BKPF_BUP FI Accounting Document: Authorization for Posting Periods
    F_BKPF_GSB FI Accounting Document: Authorization for Business Areas
    F_BKPF_KOA FI Accounting Document: Authorization for Account Types
    F_BKPF_VW FI Acc. Document: Change/Display Default Vals for Doc.Type/PKey
    F_BL_BANK FI Authorization for House Banks and Payment Methods
    F_BNKA_BUK FI Banks: Authorization for Company Codes
    I hope it will help.
    BR,
    Satya

  • Not getting alerts even after applied the monitoring policy on user defined group.

    Hi,
    recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold  70% as crtical and 50 % as warning in my monitoring policy.
    Some of my servers are having 77% disk utlization and im not getting any alerts for that.
    What will be the problem?
    When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
    Please help me to resolve the issue.
    Thanks,
    Veijar

    Hi Stijn,
    Thanks for the response.
    You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
    But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
    Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
    Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
    via mail.Also Reshmi does not get alert via mail and error file shows error like -
    No devices for user: Reshmi.
    Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
    which i was getting earlier while sending personalized ibot.
    I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
    Profile.
    Why the users don't get alert via mail? What could be the problem?

  • LMS 3.2 Common Services User Defined Groups problem

    CiscoWorks LMS 3.2 is installed on Windows 2008 64-bit server.
    All devices are added into appropriate User defined group in Groups/Common Services.
    All groups are fine except that Members of group named Switch-HO-access have been copied also to group named Router-Branch by system for unknown reasons.
    At few files we have noticed errors :
    " FATAL  com.cisco.nm.xms.ogs.server.OGSServer main  Exception while OGS Server start up: CTMRegistry::startRegistryServer() : Can't find/start registry server "  and
    " com.cisco.nm.xms.ogs.util.OGSException: CTMRegistry::startRegistryServer() : Can't find/start registry server ".
    What is the reason for copying this devices and is there some other underlying problem?

    it seems that the errors you see correlate with regular stopping/starting of the LMS processes (dmgtd) so this would be a normal behaviour.
    Can you provide a screenshot of the problem you describe and also the rule for the group Switch-HO-access and Router-Branch

  • LMS 4.2 User Defined Groups Empty after Daemon restart

    Hello
    I need some help here.
    In order to get topology services to run on a non resolvable DNS server I have followed the instructions in the online help and got Topology Services to start. My issue now is that all my userdefined groups are empty and I can not edit them - it gives me a error message.
    Checked the parent groups and these are as supposed - the system groups - subnet groups fx are also populated.
    What do you advise?
    I have read oither posts and some people were advised to restart crmdmgtd as in this thread:
    net stop crmdmgtd
    net start crmdmgtd
    http://https://supportforums.cisco.com/message/3414498#3414498
    Should I just follow the same steps? I can not see find this process in 4.2
    Thanks Isaac
    PS: These were the steps followed in order to make Topology Services to work.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------                  The Cisco Prime LMS client must be able to resolve the hostname of the Cisco Prime LMS server to  server's IP  Address, through DNS.
    If the Cisco Prime LMS server is not DNS resolvable, Cisco Prime LMS client can access it with the IP  address itself, by performing the following steps:
    Open the orb.properties file. Solaris or Soft Appliance: NMSROOT/lib/classpath Windows: NMSROOT\lib\classpath where NMSROOT is the directory where you have installed Cisco Prime LMS. Set the property as follows: jacorb.dns.enable=off Go to Admin > Trust Management > Local Server > Certificate Setup.
    The Certificate Setup page appears. Enter the IP Address of the Cisco Prime LMS Server in the Hostname textbox. Populate the other columns as explained in the Online help for Administration of Cisco Prime LAN  Management Solution 4.2. Click Apply to generate the self-signed certificate. Restart the daemons. See the Online help for Administration of Cisco Prime LAN Management Solution 4.2 for instructions. You will be able to launch Topology Services with the IP address itself. 

    Hi Michel and thanks for the reply.
    The "Physical Location" groups magically started working.  I had tried to apply a bunch of device update packages a couple of days ago.  I thought they all failed but maybe some of them actually applied.  I have no idea but the 2 groups with a rule like this one are now populating:
    Device.Hostname startswith "XYZ"
    However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
    Device.Admin_responsibility equals "XYZ"
    Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
    If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups.  I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked.  I always had to go into group admin and manually refresh to get the groups to update.  I have tried that several times in 4.1 with no luck.
    -Jeff

Maybe you are looking for