LMSW or Excel macro...that is the question

Hi all,
I've written an interface that uploads planned independent requirements from a spreadsheet...couldn't have done it without the assistance of this forum of course...thank you!!! Now I've been handed a spreadsheet from a legacy system that contains requirements data. I've been asked to convert this existing spredsheet to the new format so the data can be loaded via my program. So I'm struggling with the idea of creating an Excel macro to convert the legacy file to the new format or use LSMW to perform the data load directly. I know nothing about LSMW. also, I had to create a custom BAPI from the SAP provided version to meet all of the functional requirements. Can someone give me some advice on how to best proceed?
regards,
Mat

Hi Mathew,
Since u have already written a interface to update the PIR data guess you can use the same program to upload the data from the legacy spreadsheet and massage the data in the custom program itself and bring the data into a format which ur current program can accept. Since u already have a program just using them would make life more easy.
Cheers
VJ

Similar Messages

I have a new iPod and now I can't buy something on it ,because of the safety questions. I have not the answers. I can't remember that answer the questions.

I have a new iPod and now I can't buy something on it ,because of the safety questions. I have not the answers. I can't remember that answer the questions.

Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09&11/2012) - https://discussions.apple.com/message/19809294 and https://discussions.apple.com/message/20229239
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

Ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset.

ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset. is there anything i can do to fix this or am i screwed?

If you have music that was purchased on different iTunes accounts than the one you use, then you must provide the password, otherwise the tunes are not considered yours. You can turn off iCloud and just use the usual USB sync method. But I wonder whether you'll have the same problem?

HD Upper or lower interlace or not that is the question

Ok Im a bit confused and cannot seem to get a straight direction on this. I shoot in 30fps 1080i, I capture in HD via firewire, I edit and when outputting for regular DVDs do I encode UPPER FIELD first since the source media is HD or LOWER FIELD first because it is doing to DV.
When encoding with Media Encoder should I check the deinterlace button when encoding HD for a DV project going to encore or not check it...that is the question.
Where is my Commedore 64 when I need it?

Choose the correct field order for your
export format when exporting, in this case DV.
Choose progressive/interlaced depending on your export format when exporting. Since DV is interlaced, do not de-interlace.
Who needs a Commodore 64 when you have a Vic 20! ;)
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How do I create an excel file that has the volume output and the time at which it occured?

Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
Hello:
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
RATETEST.vi ‏202 KB

Let me start by answering the specific question, and then I will provide some suggestions on the code.
The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
As for the code:
As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear.

Excel Macro that executes package Load Infoprovider with parameters in code

Hi everybody,
Is it possible to create a macro in Excel that executes the package 'Load Infoprovider', and all the parameters (Infocube, Transformation file, ... ) are written in the code of the macro?
If it is so, do you have some example that I can use?
Thanks in advance,
Albert

Hi Albert,
There is a MNU function which is used to run a particular DM package. Please go to the below site and refer to the MNU_eDATA_SELECTPACKAGE command.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f7/715647fa774763827084cd28ef3aff/content.htm
Hope this helps.

To Mac, or not to Mac, that is the question...

Okay, so I don't know if I'm allowed to ask this in this forum, but I'll give it a try anyway.
I will be starting college in the fall and will need a computer. I've had myself convinced for a while now that I want a MacBook...but now I'm starting to have second thoughts.
It's just that I've always used PCs in my life, I know how to do anything I want really on a PC, and I don't know if it's worth the bother to relearn a whole new system. Plus, I mean, I'm starting college, I should know how to use my computer before going, don't you agree? Just how hard is it to adjust?
Another issue is the whole windows/mac os thing in that I'm worried about programs running on it. I don't really understand how Boot Camp works. You just install Windows XP (do you have to buy it? is it a special mac version?) and your Mac turns into a Windows machine? As in it looks just like my HP lap top looks now, wiht the bar at the bottom, etc.? But then I've read some posts on these threads and ppl say you could get viruses that way b/c you are using windows. Which is one of the reasons I would want to switch to a mac. If you do use Windows and the Mac OS, you can just switch back and forth whenever you want? Are all the programs and files the same then in both systems? Like I wouldn't want half my files to be in one program and the other half in another. I don't know, I don't really understand it all.
Also, my mom got a MacBook and I guess they bought a new laser printer yesterday and had to return it today b/c they realized it's not apple compatible. They went to Office Max and realized barely any printers are apple compatible! The had the toughest time finding an affordable printer that they liked! How can this be? Is this how it's always going to be when I'm buying accessories?
I just love all the features the Mac has. I am constantly frustrated w/ Windows and all the **** viruses and adware I have on my computer, which is a major reason for my wanting to switch. FrontRow seems like the coolest thing ever. And the cool magnet things. And I already have an iPod, so they'd run nicely together. Plus, it's pretty. (I know it's a dumb reason to buy a computer, but I'm a girl, what can I say, that stuff is important to me.)
So anyway, I'm now debating between a MacBook and a tablet PC, possibly Gateway or IBM. Could anyone try to convince me one way or the other (considering I'm on a Mac discussion board, I'm sure it'll be the Mac way)? Thanks everyone, I really appreciate your help.

My guess is that you're likely to find more Mac users at a college than most other areas, so I wouldn't worry too much about 'making the switch' right before going to college -- you'll have lots of help nearby.
Boot Camp is pretty cool!
It's a free utility from Apple that basically prepares your Mac so it can run Windows XP. Boot Camp divides your hard drive into seperate areas (partitions) -- one for OS X and another for XP. Boot Camp doesn't come with a copy of Windows XP -- you'll need to provide that. The XP that Boot Camp installs isn't a special version for Mac -- it's the same version that runs on any computer, although to work with Boot Camp, you'll need an XP install CD that has Service Pack 2 applied. Once XP has been installed on your Macbook, it should look (and act) like XP on your HP (with the exception of any special tools/programs that HP loaded on your HP laptop, obviously).
When you restart your MacBook, it will boot into whichever OS that you set as the default. If you want to boot into the other OS, you just hold down the OPTION key when you restart and then you pick which OS to load. Your computer is basically divided into two systems, so no, programs are not automatically on both systems. If you install the Mac version of Microsoft Office in OS X, you're not going to have Excel/Word/etc when you boot into XP unless you specifically install the Windows version of Microsoft Office.
Regarding accessories, you always need to check that they work with OS X. My printer was a problem too. It was an el cheapo Samsung laser printer and Samsung apparently didn't feel like spending the money to write OS X drivers for it, but it turned out that an older Samsung OS X driver worked just fine. I had zero problems getting my Kodak camera to work -- I just plugged it in an OS X started using it ... no drivers to install or anything, which made it way easier than the crap I had to do in XP to get XP to see it. My iPod nano worked with no problems too.
I really, really love my MacBook. I don't know when you have to make your decision, but try using your moms as much as you can (if you can). I bought a Mac mini for my other half last year (birthday present). I had NO interest at that time in Macs or OS X, but after a few days of watching over his shoulder, I was hooked and got myself a mini (and then a PowerBook and then a MacBook Pro and then a MacBook) .. it's addicting.

To RAID or not to RAID, that is the question

People often ask: Should I raid my disks?
The question is simple, unfortunately the answer is not. So here I'm going to give you another guide to help you decide when a raid array is advantageous and how to go about it. Notice that this guide also applies to SSD's, with the expection of the parts about mechanical failure.
What is a RAID?
RAID is the acronym for "Redundant Array of Inexpensive Disks". The concept originated at the University of Berkely in 1987 and was intended to create large storage capacity with smaller disks without the need for very expensive and reliable disks, that were very expensive at that time, often a tenfold of smaller disks. Today prices of hard disks have fallen so much that it often is more attractive to buy a single 1 TB disk than two 500 GB disks. That is the reason that today RAID is often described as "Redundant Array of Independent Disks".
The idea behind RAID is to have a number of disks co-operate in such a way that it looks like one big disk. Note that 'Spanning' is not in any way comparable to RAID, it is just a way, like inverse partitioning, to extend the base partition to use multiple disks, without changing the method of reading and writing to that extended partition.
Why use a RAID?
Now with these lower disks prices today, why would a video editor consider a raid array? There are two reasons:
1. Redundancy (or security)
2. Performance
Notice that it can be a combination of both reasons, it is not an 'either/or' reason.
Does a video editor need RAID?
No, if the above two reasons, redundancy and performance are not relevant. Yes if either or both reasons are relevant.
Re 1. Redundancy
Every mechanical disk will eventually fail, sometimes on the first day of use, sometimes only after several years of usage. When that happens, all data on that disk are lost and the only solution is to get a new disk and recreate the data from a backup (if you have one) or through tedious and time-consuming work. If that does not bother you and you can spare the time to recreate the data that were lost, then redundancy is not an issue for you. Keep in mind that disk failures often occur at inconvenient moments, on a weekend when the shops are closed and you can't get a replacement disk, or when you have a tight deadline.
Re 2. Performance
Opponents of RAID will often say that any modern disk is fast enough for video editing and they are right, but only to a certain extent. As fill rates of disks go up, performance goes down, sometimes by 50%. As the number of disk activities on the disk go up , like accessing (reading or writing) pagefile, media cache, previews, media, project file, output file, performance goes down the drain. The more tracks you have in your project, the more strain is put on your disk. 10 tracks require 10 times the bandwidth of a single track. The more applications you have open, the more your pagefile is used. This is especially apparent on systems with limited memory.
The following chart shows how fill rates on a single disk will impact performance:
Remember that I said previously the idea behind RAID is to have a number of disks co-operate in such a way that it looks like one big disk. That means a RAID will not fill up as fast as a single disk and not experience the same performance degradation.
RAID basics
Now that we have established the reasons why people may consider RAID, let's have a look at some of the basics.
Single or Multiple?
There are three methods to configure a RAID array: mirroring, striping and parity check. These are called levels and levels are subdivided in single or multiple levels, depending on the method used. A single level RAID0 is striping only and a multiple level RAID15 is a combination of mirroring (1) and parity check (5). Multiple levels are designated by combining two single levels, like a multiple RAID10, which is a combination of single level RAID0 with a single level RAID1.
Hardware or Software?
The difference is quite simple: hardware RAID controllers have their own processor and usually their own cache. Software RAID controllers use the CPU and the RAM on the motherboard. Hardware controllers are faster but also more expensive. For RAID levels without parity check like Raid0, Raid1 and Raid10 software controllers are quite good with a fast PC.
The common Promise and Highpoint cards are all software controllers that (mis)use the CPU and RAM memory. Real hardware RAID controllers all use their own IOP (I/O Processor) and cache (ever wondered why these hardware controllers are expensive?).
There are two kinds of software RAID's. One is controlled by the BIOS/drivers (like Promise/Highpoint) and the other is solely OS dependent. The first kind can be booted from, the second one can only be accessed after the OS has started. In performance terms they do not differ significantly.
For the technically inclined: Cluster size, Block size and Chunk size
In short: Cluster size applies to the partition and Block or Stripe size applies to the array.
With a cluster size of 4 KB, data are distributed across the partition in 4 KB parts. Suppose you have a 10 KB file, three full clusters will be occupied: 4 KB - 4 KB - 2 KB. The remaining 2 KB is called slackspace and can not be used by other files. With a block size (stripe) of 64 KB, data are distributed across the array disks in 64 KB parts. Suppose you have a 200 KB file, the first part of 64 KB is located on disk A, the second 64 KB is located on disk B, the third 64 KB is located on disk C and the remaining 8 KB on disk D. Here there is no slackspace, because the block size is subdivided into clusters. When working with audio/video material a large block size is faster than smaller block size. Working with smaller files a smaller block size is preferred.
Sometimes you have an option to set 'Chunk size', depending on the controller. It is the minimal size of a data request from the controller to a disk in the array and only useful when striping is used. Suppose you have a block size of 16 KB and you want to read a 1 MB file. The controller needs to read 64 times a block of 16 KB. With a chunk size of 32 KB the first two blocks will be read from the first disk, the next two blocks from the next disk, and so on. If the chunk size is 128 KB. the first 8 blocks will be read from the first disk, the next 8 block from the second disk, etcetera. Smaller chunks are advisable with smaller filer, larger chunks are better for larger (audio/video) files.
RAID Levels
For a full explanation of various RAID levels, look here: http://www.acnc.com/04_01_00/html
What are the benefits of each RAID level for video editing and what are the risks and benefits of each level to help you achieve better redundancy and/or better performance? I will try to summarize them below.
RAID0
The Band AID of RAID. There is no redundancy! There is a risk of losing all data that is a multiplier of the number of disks in the array. A 2 disk array carries twice the risk over a single disk, a X disk array carries X times the risk of losing it all.
A RAID0 is perfectly OK for data that you will not worry about if you lose them. Like pagefile, media cache, previews or rendered files. It may be a hassle if you have media files on it, because it requires recapturing, but not the end-of-the-world. It will be disastrous for project files.
Performance wise a RAID0 is almost X times as fast as a single disk, X being the number of disks in the array.
RAID1
The RAID level for the paranoid. It gives no performance gain whatsoever. It gives you redundancy, at the cost of a disk. If you are meticulous about backups and make them all the time, RAID1 may be a better solution, because you can never forget to make a backup, you can restore instantly. Remember backups require a disk as well. This RAID1 level can only be advised for the C drive IMO if you do not have any trust in the reliability of modern-day disks. It is of no use for video editing.
RAID3
The RAID level for video editors. There is redundancy! There is only a small performance hit when rebuilding an array after a disk failure due to the dedicated parity disk. There is quite a perfomance gain achieveable, but the drawback is that it requires a hardware controller from Areca. You could do worse, but apart from it being the Rolls-Royce amongst the hardware controllers, it is expensive like the car.
Performance wise it will achieve around 85% (X-1) on reads and 60% (X-1) on writes over a single disk with X being the number of disks in the array. So with a 6 disk array in RAID3, you get around 0.85x (6-1) = 425% the performance of a single disk on reads and 300% on writes.
RAID5 & RAID6
The RAID level for non-video applications with distributed parity. This makes for a somewhat severe hit in performance in case of a disk failure. The double parity in RAID6 makes it ideal for NAS applications.
The performance gain is slightly lower than with a RAID3. RAID6 requires a dedicated hardware controller, RAID5 can be run on a software controller but the CPU overhead negates to a large extent the performance gain.
RAID10
The RAID level for paranoids in a hurry. It delivers the same redundancy as RAID 1, but since it is a multilevel RAID, combined with a RAID0, delivers twice the performance of a single disk at four times the cost, apart from the controller. The main advantage is that you can have two disk failures at the same time without losing data, but what are the chances of that happening?
RAID30, 50 & 60
Just striped arrays of RAID 3, 5 or 6 which doubles the speed while keeping redundancy at the same level.
EXTRAS
RAID level 0 is striping, RAID level 1 is mirroring and RAID levels 3, 5 & 6 are parity check methods. For parity check methods, dedicated controllers offer the possibility of defining a hot-spare disk. A hot-spare disk is an extra disk that does not belong to the array, but is instantly available to take over from a failed disk in the array. Suppose you have a 6 disk RAID3 array with a single hot-spare disk and assume one disk fails. What happens? The data on the failed disk can be reconstructed in the background, while you keep working with negligeable impact on performance, to the hot-spare. In mere minutes your system is back at the performance level you were before the disk failure. Sometime later you take out the failed drive, replace it for a new drive and define that as the new hot-spare.
As stated earlier, dedicated hardware controllers use their own IOP and their own cache instead of using the memory on the mobo. The larger the cache on the controller, the better the performance, but the main benefits of cache memory are when handling random R+W activities. For sequential activities, like with video editing it does not pay to use more than 2 GB of cache maximum.
REDUNDANCY(or security)
Not using RAID entails the risk of a drive failing and losing all data. The same applies to using RAID0 (or better said AID0), only multiplied by the number of disks in the array.
RAID1 or 10 overcomes that risk by offering a mirror, an instant backup in case of failure at high cost.
RAID3, 5 or 6 offers protection for disk failure by reconstructing the lost data in the background (1 disk for RAID3 & 5, 2 disks for RAID6) while continuing your work. This is even enhanced by the use of hot-spares (a double assurance).
PERFORMANCE
RAID0 offers the best performance increase over a single disk, followed by RAID3, then RAID5 amd finally RAID6. RAID1 does not offer any performance increase.
Hardware RAID controllers offer the best performance and the best options (like adjustable block/stripe size and hot-spares), but they are costly.
SUMMARY
If you only have 3 or 4 disks in total, forget about RAID. Set them up as individual disks, or the better alternative, get more disks for better redundancy and better performance. What does it cost today to buy an extra disk when compared to the downtime you have when a single disk fails?
If you have room for at least 4 or more disks, apart from the OS disk, consider a RAID3 if you have an Areca controller, otherwise consider a RAID5.
If you have even more disks, consider a multilevel array by striping a parity check array to form a RAID30, 50 or 60.
If you can afford the investment get an Areca controller with battery backup module (BBM) and 2 GB of cache. Avoid as much as possible the use of software raids, especially under Windows if you can.
RAID, if properly configured will give you added redundancy (or security) to protect you from disk failure while you can continue working and will give you increased performance.
Look carefully at this chart to see what a properly configured RAID can do to performance and compare it to the earlier single disk chart to see the performance difference, while taking into consideration that you can have one disks (in each array) fail at the same time without data loss:
Hope this helps in deciding whether RAID is worthwhile for you.
WARNING: If you have a power outage without a UPS, all bets are off.
A power outage can destroy the contents of all your disks if you don't have a proper UPS. A BBM may not be sufficient to help in that case.

Harm,
thanks for your comment.
Your understanding was absolutely right.
Sorry my mistake its QNAP 639 PRO, populated with 5 1TB, one is empty.
So for my understanding, in my configuration you suggest NOT to use RAID-0. Im not willing to have more drives in my workstation becouse if my projekts are finished, i archiv on QNAP or archiv on other external drive.
My only intention is to have as much speed and as much performance as possible during developing a projekt
BTW QNAP i also use as media-center in combination with Sony PS3 to run the encoded files.
For my final understanding:
C: i understand
D: i understand
E and F: does it mean, when i create a projekt on E, all my captured and project-used MPEG - files should be situated in F? Or which media in F you mean?
Following your suggestions in want to rebulid Harms-Best Vista64-Benchmark comp to reach maximum speed and performance. Can i use in general the those hardware components (exept so many HD drives and exept Areca raid controller ) in my drive configuration C to F. Or would you suggest some changings in my situation?

To backup or not to backup...that is the question

ok, of course we should all back up regularly, that's not really the question. I'm wondering specifically what the benefits are of backing up the OS if you have your original install discs.
My understanding is that if your system crashes, you want to be able to boot up your system from another copy of the OS. If you have the disc, no need to back up to an external right?
Of course I've backed up my user folder but I just want to make sure I'm not risking anything by not having another copy of my OS on the external as well.
Thanks in advance!

1. Kevin wrote: "What's the difference between a Backup Set and duplicating a volume in a folder?"The differences between Duplicates and Backup Sets are discussed in my "Backup and Recovery" FAQ.
Basically:
- Backup Sets save all the files one has backed up in a single file, similar to a disk image, but without all the time required to create a disk image. A Catalog file of the contents of the Backup Set is also created. One accesses the contents of a Backup Set through the Restore function of Retrospect. So, the files in the Backup Set aren't "in the clear" i.e. you can't simply copy them from the Backup Set in Finder. Backup Sets can also be compressed and encrypted. Duplicates cannot.
- As noted in my prior post, a Duplicate to a folder permits you to to access the files you've backed up via Finder. The volume you've Duplicated to the folder is copied to the folder, just as if it was copied to another volume, but isn't bootable (assuming the volume you duplicated was bootable) since you can't boot from a folder.
2. You wrote: "In SuperDuper! you can create a disk image with Disk Utility and clone to that disk image and, I think you can boot from the disk image as well. A partition is better but the disk image is good in a pinch."Yes, with SD you can duplicate to a sparse image, but you can't boot from that image. It will work in a pinch, but not every basic backup app supports this function.
It's also unclear (not addressed specifically in the SD documentation) if you can Smart Update a backup to a Sparse Image: I suspect not. Sparse images are tricky. For example, deleting files from them does not recover the space the files occupied: one has to use hdiutil compact to recover the space occupied by deleted files in a sparse image. The compact operation is what FileVault is doing when it periodically prompts users to recover space from their encrypted Home folders.
Backup Sets can be updated incrementally: new or changed files can be added to the Backup Set. Each incremental backup to a Backup Set is known as a session. This can be a useful feature since it does not replace the originals from previous backups. This has some nice attributes:
- If you regularly backup to a Backup Set and want to get an earlier version of a file you've been working on that has been regularly backed up to a Backup Set, you can restore a prior version of that file from the Backup Set. If you Smart Update a duplicate in SD, no old versions are saved.
- Likewise, if you trash a file, empty the trash, and use SD Smart Update to backup the volume on which that file resided, the file is gone from the backup and your hard drive. If you've regularly backed up that volume to a Retrospect Backup Set, you can restore that file — in the state it was in at any prior time it was backed up to that Backup Set — from the Backup Set.
The Restore function of Retrospect lets you access the individual sessions (incremental backups) saved in a Backup Set. You can restore one or more files or folders — or an entire disk — to any point in time within the time span of the sessions in the Backup Set. This is very useful in project-based work, where one may have many versions of documents and need a copy of an earlier version of some project file that was either updated (without first saving a copy) or trashed.
So, SD's sparse image capability is good in a pinch, but not as flexible or versatile as Retrospect's Backup Sets.
I'm a big fan of Backup Sets.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

To EAR or not to EAR? That is the question.

Ok, I'm near the tail-end of a long upgrade process from 5.1 to 6.1,
and man,
were there some major bumps to get over. And the thing is... a good
number
of the problems were dealing with the new J2EE packaging specs, i.e.
EAR,
WAR files.
First, I had a heck of a time getting Apache SOAP to integrate with
6.1 correctly. Classloader/classpath issues. I couldn't find any way
to solve my
problems other than putting the soap.jar INTO my EAR file (which I
don't like)
seperate from my SOAP WAR file (which was also in the EAR). Then
define
a manifest file that pointed the files in the SOAP WAR outside of
itself
to the SOAP JAR file in my EAR. See... If the JAR was inside the WAR
it wasn't
able to access any of my beans... and outside the WAR, the files in
the WAR couldn't get to the JAR.
Second, we use Toplink. And in one case, we actually serialize an
object to
the database using Toplink (not always a good idea, but made sense
here). Now,
in pre-EAR 5.1 days, this was all fine and good. But with the EAR,
all hell
seem to break loose. Essentially, Toplink... being part of the App's
container
environment is independent of the whole EAR classloader stuff. You
NEED the
Toplink JAR files in the system classpath (not inside the EAR), which
is fine and what I would want. However, when you deserialize the
object and Toplink
needs a reference to the class it's being deserialized into... well,
being
outside the EAR... you have to put that class reference in the system
class
path. And of course, that class has dependencies on a number of other
classes
in the system (including, eventually an EJB or 2)... and well, we
almost
ended up having to put a whole thing outside of the EAR and back into
the
system classpath again. But I was able to modularize some things a
little
more, and package what I needed into a jar file and put that on the
system
classpath without affecting the deployment of EJBs in the EAr.
Third, I'm having problems getting my JMS to access a listener class
inside
the EAR. I haven't fully confirmed this... but from what I've read,
this
seems like a similar problem as described above. And, you need to
somehow
get that in your classpath. Of course, dependency-wise, that WILL be
pulling
in some of the EJBs.... and now, I have a couple of my EJBs back in
the
classpath... UGH!!! Well, eventually, I'll refactor this stuff into
message
driven beans, and I can then supposedly get out of this whole. But,
for
the time being... that's where this is.
So... with all this in mind... my real question is this???
What really is the benefit to EAR'ing other than supposedly making
your packaging of things cleaner AND the ability to port your
application to other
app servers easily. Cause, though the first reason is nice... it's
not
essential. And as far as the second reason goes... I don't see that
changing
anytime soon. It just seems that every problem I get is related to
this
stuff, and it's very annoying. And I'm not sure what I REALLY get
from the
EAR that's worth all the pain??
-Michael J. Hudson
[email protected]

As far as I know, one of the main advantages of ear files is that WLS can
undeploy applications in a clean manner. This can give you the
possibility of having hot upgrades on a production system amongst other
things.
Stephane Vaucher
Research professional
CIRANO
"Michael J. Hudson" wrote:
Ok, I'm near the tail-end of a long upgrade process from 5.1 to 6.1,
and man,
were there some major bumps to get over. And the thing is... a good
number
of the problems were dealing with the new J2EE packaging specs, i.e.
EAR,
WAR files.
First, I had a heck of a time getting Apache SOAP to integrate with
6.1 correctly. Classloader/classpath issues. I couldn't find any way
to solve my
problems other than putting the soap.jar INTO my EAR file (which I
don't like)
seperate from my SOAP WAR file (which was also in the EAR). Then
define
a manifest file that pointed the files in the SOAP WAR outside of
itself
to the SOAP JAR file in my EAR. See... If the JAR was inside the WAR
it wasn't
able to access any of my beans... and outside the WAR, the files in
the WAR couldn't get to the JAR.
Second, we use Toplink. And in one case, we actually serialize an
object to
the database using Toplink (not always a good idea, but made sense
here). Now,
in pre-EAR 5.1 days, this was all fine and good. But with the EAR,
all hell
seem to break loose. Essentially, Toplink... being part of the App's
container
environment is independent of the whole EAR classloader stuff. You
NEED the
Toplink JAR files in the system classpath (not inside the EAR), which
is fine and what I would want. However, when you deserialize the
object and Toplink
needs a reference to the class it's being deserialized into... well,
being
outside the EAR... you have to put that class reference in the system
class
path. And of course, that class has dependencies on a number of other
classes
in the system (including, eventually an EJB or 2)... and well, we
almost
ended up having to put a whole thing outside of the EAR and back into
the
system classpath again. But I was able to modularize some things a
little
more, and package what I needed into a jar file and put that on the
system
classpath without affecting the deployment of EJBs in the EAr.
Third, I'm having problems getting my JMS to access a listener class
inside
the EAR. I haven't fully confirmed this... but from what I've read,
this
seems like a similar problem as described above. And, you need to
somehow
get that in your classpath. Of course, dependency-wise, that WILL be
pulling
in some of the EJBs.... and now, I have a couple of my EJBs back in
the
classpath... UGH!!! Well, eventually, I'll refactor this stuff into
message
driven beans, and I can then supposedly get out of this whole. But,
for
the time being... that's where this is.
So... with all this in mind... my real question is this???
What really is the benefit to EAR'ing other than supposedly making
your packaging of things cleaner AND the ability to port your
application to other
app servers easily. Cause, though the first reason is nice... it's
not
essential. And as far as the second reason goes... I don't see that
changing
anytime soon. It just seems that every problem I get is related to
this
stuff, and it's very annoying. And I'm not sure what I REALLY get
from the
EAR that's worth all the pain??
-Michael J. Hudson
[email protected]

To upgrade or not to upgrade....that is the question.

So my original iPhone is just starting to end its lifespan. I have had it since the phone first came out (so for about 2.5 years). I am having problems with battery life, freezing, and the sleep button keeps getting stuck. I brought it to the genius bar today and they told me that they can replace the phone with a new one (still the original iPhone) for what amounts to about $90 after taxes and stuff.
So here is the question. Do I spend the $90 for the same phone with no upgrades and the capability of keeping my current service plan (only $60/month) or do I upgrade to the newest iPhone for only an extra $100 but then have to pay an additional $15 or more per month for the same service? Is the newest phone really worth that extra money?

That's a decision only you can make. Personally, it would be worth it to me to go from a 2G to a 3GS (assuming I was in a good 3G coverage area) but if you can limp along for another few months, Apple may come out with a new iPhone this summer, considering they have for the last 3 summers.

To use SQL or to not use SQL ..... That is the question

A couple of posts lately have brought something to my attention that I wanted to discuss between the folks that view this forum because I believe it is important. I highly value the opinions of many of the members here so I think getting your insight would not only benefit me, but many other forum members as well.
This discussion stems from two posts:
{message:id=3786432} (Billy)
...The question that you need to ask yourself is why use such a technique? For rendering the data a specific way in the client? Well, rendering data is NOT a SQL function and in essence a result of ignorance of how to correctly use client-server. Rendering on the client is dealt with by the client itself. Using SQL to do it.. not only nasty (as many of these examples above are), but also far from optimal and efficient SQL. And in most cases, will not scale. Increase the data volume of the table queried and there will be a hefty performance knock as SQL is incorrectly used.
...>
{message:id=3914362} (Sven W.)
...For the Pivot considerations. It is usually much better not to try to do this inside the database. If you think about it. The data itself can be fetch from the database very easily. To do a PIVOT is a kind of GUI/Layout representation for this data. This should be done in the GUI Layer.
>
I tried to respond to the thread Billy posted in, so I'll cut and paste my response here:
Discussion
Where do we as database developers draw the line between the correct use of SQL or not? Or between rendering on the client and just returning data?
Now with LISTAGG, PIVOT and UNPIVOT all available to us would these be considered correct uses of SQL?
Where does this leave the TO_CHAR function? Is this considered rendering?
I'm fully expecting a fuzzy answer with something along the lines of "do the work where it makes the most sense" from a ease of development and maintainability perspective but I just wanted to ask.
Hopefully this is a valuable discussion.
Thanks!

Let me give a simple example. You can store images in a table as a LOB. You can serve these images to a web browser client via mod_plsql.
However, the data is static. It requires I/O (and some hefty ones for larger images). What is the biggest performance penalty we have in Oracle? I/O? What is affected by doing I/O to read these images? The buffer cache (which will age out other data in the cache).
Where else can we store this data? The web server. At what cost to the performance of Oracle? None. Impact on web server? Heck, web servers are designed at their very core to do this!
So where is the best place to storage static images in this specific case? Not the database, but the web server.
Now simply extend this concept to the client - where is the best place to render data?
Should the data be formatted for rendering (e.g. converted into HTML) in the database layer, or should it rather be done in the presentation layer?
Now I can already hear the argument that the former is exactly what we are doing using APEX. We create dynamic HTML pages on the Oracle server side and then dish that up to the rendering layer to display.
Two issues that need to be considered. Firstly, this is not done using SQL. This is done using a procedure language called PL/SQL - not using native SQL. PL/SQL in this case is used exactly as Java or PHP or Perl or any other "+app layer+" language would be used. It only happens that PL/SQL resides in the database too. But do not mistake it for what it really is - the application layer.
The second issue drives home the point that even in 3 tier client server, the application layer is not the best place to do the formatting for the rendering layer. Web 2.0 aka AJAX.. Where the app layer delivers a dynamic rendering engine (as Javascript) to the rendering layer. After which rendering and formatting are done solely inside that rendering layer. And interaction between that and the app layer is requests for new/fresh data to be rendered.
Why is AJAX becoming so popular? Key issues and concepts like performance, and a rich client interface and so on.
This all points that the fundamental principle of using the rendering layer to do its thing and using the SQL layer to do its (separate and different) thing, still holds true.
Yes, we may not always stick to this principle - as we do with doing the rendering (creating HTML) in PL/SQL using APEX for example.. but this is not because the principle is unsound. It is because of technology reasons (different browsers, different behaviour), lack of support for W3C standards (hello IE) and so on.
It is only recently that these problem areas have been meaningfully addressed.. and why rendering frameworks like extJS is the (rendering layer) future of 3 tier client server.
If the concept of using SQL to perform rendering and formatting had any substance.. then there would have been a lot of resistance to AJAX for example. The reverse is true.. as we all want to use SQL to do SQL and want the rendering layer to do its thing without us having to code in SQL to specifically support rendering and formatting. It is clunky. It slows down the SQL (every formatting function is a tiny overhead that adds up). It does not bode well for maintenance and changes to the presentation layer. And all those tiny overheads can spell doom for scalability.
I do not see any gray lines here, or a question of "+opinion+", or "+it depends+". The architecture is clear. The fundamentals are sound.
The real issue is how we choose to apply these. But (the "+incorrect+") application (of these fundamentals) does not invalidate the fundamentals.

To subclass, or not to subclass? That is the question.

I have a comand bar built from Command objects. The Command knows how to display itself (flat, then raised w/mouseOver, depressed w/mousePressed...). The command bar may be either an icon bar or a menu bar - the Command knows about icons, text names, tooltip text and so on.
The icon bar is simpler in its painting (just icon). The menu shows icon (if any) name, shortcut, . . . So should I have a CommandBar class that knows how to display itself in two skins? Or should I have a MenuBar that extends IconBar? Or a MenuBar and an IconBar that both extend CommandBar?
More generally, given close siblings when should you choose a single class with options and when should you subclass? (Assume that the single class is not so big that division is a practical necessity.)

You can always use the Decorator (GoF) pattern. Look at what Sun did with collections. You have List (and ArrayList, etc.). There is also a method in Collections: synchronizedList(). That 'wraps' the normal list with a decorator that provides synchronization. For your application, take the 'base' functionality and add a decorator for paint() and fire().
As far as general design principles, I follow something that is probably not an accepted standard: I only sub-class abstract classes. Sometimes, you get a non-sensical design, such as:
AbstractButton
DefaultButton extends AbstractButton (with only a constructor)
ComplicatedButton extends AbstractButton (with constructor and extra methods)
Now, from an efficiency perspective, it would probably be best to collapse AbstractButton into DefaultButton and have ComplicatedButton extend that class. However, I have been on too many projects where someone wants to create a hierarchy n levels deep (usually more than three). The problem is that tihs 'freezes' your design, as you can only inherit from a single superclass.
So, my general solution to this is to have only one level of inheritance, and that inheritance only occurs from an abstract parent. For the remainder of the design, I use interfaces, composition and delegation liberally. This allows the most 'freedom' in your hierarchy without any loss in functionality.
For example, why inherit from a concrete class when you can simply declare an interface, make a helper that implements that interface's methods and then delegate calls to the helper in subclasses? I now am only inheriting from Object, which allows me, in the future, to inherit from a Java class or my own abstract class.
That probably did not help answer your question. But that's generally how I approach things. Caveat implementor: other designs may be equally valid.
- Saish

String: Extend or not extend that�s the question ...

A simple design question:
If you need a method to create a String with chars of the same value, let us name it fill.
Would you inherit from String or create a helper class with a static method, and why:
class XString : extends String
String fill(int count, char character)
//add character count times to a String and return the result
class StringHelper
static String fill(int count, char character)
//add character count times to a String and return the result
I think it�s bad design to create this awful helper class.
What�s your opinion.
Dirk

But is this good OO Design? It seems to
me like a goto in prozedural languages.So the argument is whether you should extend the functionality of a particular object by actually extending the class? I can see why creating helper classes can feel like "fragmenting" the code.
One of the problems with extension, despite its core role in OO principles, is that its implementation in non-trivial situations tends to break one of the other OO principles... encapsulation.
Extending a class to fulfil the existing API is generally fine, but any kind of extension to the API generally requires knowledge of how the extended class functions - the implementation - to prevent disrupting existing behaviour, or requires rewriting the extended functions to prevent such clashes. There's a good example in Doug Lea's book Effective Java.
In the context of the original example, I probably wouldn't want a method that returns a String, but an extension to StringBuffer with a repeat(char with, int count, int index) method which inserts a character a given number of times in the given location in an efficient manner would have been quite useful to me in various situations - most involving padding a buffer to a desired length before returning the required String.
Is there a particularly good reason why StringBuffer is declared final, preventing this? The only way to (pretend to) do this would be to decorate StringBuffer with a repeating class which creates a char array and inserts that into the buffer... any other method fails to meet the requirements of efficiency. In other cases, there may be no efficient way to perform some task without extension, because no sufficiently efficient method is provided.
I've talked myself into a corner, and I don't know which side of the fence I stand on. I'll continue to write decorator classes though, because I can't write extensions.

To Stream or to download: That is the Question.

Hi,
Until recently i have only used my iTunes library for music only.
I am toying with the idea of now using it for films and tv shows.
So, present set up is that i have apple TV which is connected to my home computer on the same network.
Q
1. If i buy a movie to own from my pc which has my itunes laptop on a conncted external HDD, Im assuming the movie downloads to the external HDD and is yours.
2. If you buy a movie from Apple TV to own is it simply unlimted streaming of the movie that you get as opposed to the movie file download to the storage location of your itunes library?
If you simply select the rent options from Apple TV or PC i assume its simply streaming of the movie you get, but more interested if i buy to own. Is it always fully dowloaded or streamed and is it different depending if you are using a PC or Apple TV?
Appreciate your help with the query folks.
Best Regards
Simon.

pogbellies wrote:
I would like to use Google Music as a back up. I already have iTunes Match but I like that with the Google setup I can choose whether to stream or download.
Neither iTunes Match nor Google Music are advertised as backup services. I strongly suggest you not rely on them as such and purchase an external HDD to backup your personal data.
pogbellies wrote:
The question is, given that I know Google Music can see and upload from iTunes on my PC, can it see the songs that are not local on my PC but are still showing up as they are in match (in the cloud)?
No, Google Music can not match or upload cloud streams. Only files that are physically on your computer.

LMSW or Excel macro...that is the question

Similar Messages

Maybe you are looking for