LO-COCKPIT: error in Filling Setup tables
Dear Guru's:
While filling setup tables from tcode: sbiw, I am getting following error:
EXTRACT STRUCTURE NOT ACTIVE OR BW NOT CONNECTED.
Bw is connected with R/3- I also have checked the connection thr' SM59, its working.
And even Extract structure is Active.
Then why this error is coming?
Pls let me kno.
Points will be rewarded.
Thank you.
Are you on Developement? If it is, please go to RSA6, look for the data source, and see if the extract structure is actually active, there may be one or more includes, check each one of them, if everything is fine, I would just reactivate it and move it to quality and production. If that happens only in Production, but it is fine in development, then I would make sure the development and production sytem extract structure matchs. Sometimes, someone modifies the development but never moved it to production. Check the last transport created for that extract structure too.
thanks.
Wond
Similar Messages
-
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
Timeout error while filling setup tables
HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM -
Strange error while filling setup tables for purchasing
hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you. -
Error while filling setup table
Hello all
I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
could anyone tell me what this error is referring to ?
thanksHi DK.............
I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
Exchange rate table is TCURR.
Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
Regards,
Debjani........... -
Error while filling setup tables
Hi All,
By mistake my Delta queue for SD Deliveries (2LIS_12_). NOw as a solution we are filling in the setup tables again.
But the request for filling up the tables cancelled giving the error "Document number does not exist".
I donot know, how to solve this? Plz help me ,....Its really really urgent.
Thanx in advance.Hi Preet,
Go through this links:
Re: problem when initializing setup tables for lo update
"No extraction structure active or no BW connected"
LO: No extraction structure active or no BW connected
Thanks,
Ajay -
Error while filling setup table for Quality Mangement D/Sources
HI Experts,
Iam trying to fill the QM setup tables.
Steps iam following are
1.T-code OLIQBW
2.Selecting Event QV, QE and gave selection parameters and name for Run.
3. Execute
4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:21:01
Function parameter "I_ADDITIONAL_DATA" is unknown.Hi Mansi,
Runtime Errors CALL_FUNCTION_PARM_UNKNOWN
Exceptn CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:56:20
ShrtText
Function parameter "I_ADDITIONAL_DATA" is unknown.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLQMER" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The reason for the exception is:
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Missing RAISING Clause in Interface
Program SAPLQMER
Include LQMER$01
Row 5
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS
Trigger Location of Exception
Program SAPLQMER
Include LQMERU01
Row 488
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya -
Error when filling setup table
Hi!
I'm trying to fill the set-up table in R3 for SD Billing Documents.
SBIW (Display IMG (Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data)..
When running the program i get this error msg:
"More faulty documents found than the tolerated 0000000000"
The result is that the program stops. Some of the data is coming into the set up tables, but this seems to be inconsistent.
Anybody know what I could do?
BR
BjørnThanks a lot..
How can I find the log of dumped jobs?
BR
BJørn -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
While filling the setup tables iam getting this error.
Material 009011-004 could not be converted from unit EA to unit FT
Message no. QMEX 010
Diagnosis
There is no quantity conversion of unit EA into the base unit ofmeasure FT in material master 009011-004.
System Response
During compression of the MCQALS communication structure, allquantities must be converted into the material base unit of measure. Inthis case, the quantity key figures were inconsistently updated fromthe MCQALS communication structure into the quality info system orBusiness Information Warehouse for material 009011-004.
Procedure
- Fill in the missing quantity conversion in material master 009011-004 .
- After filling in the missing quantity conversions for all materials,carry out a reorganization.
Regards
KunalHi,
Basically you need to check your R/3 system to make sure all Unit Conversions are maintained or not.
With rgds,
Anil Kumar Sharma .P -
Strategy to fill setup table fo Logical Cockpit
Hi gurus,
I have to fill setup tables (i mean MC11Va1ITM and mc12vcoitm) and have a lot orders and deliveries on R3 side. The problem is a can't continue interupdted run (according to data in rmcw3 - table for counter readings of info structures re-setup) the documents started to reinitialize again in spite of unmarked flag.
So, any ideas about strategy'll be highly appreciated.Hi Mikhail,
Kindly have a look at below links,
Part 1: SD Overview
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1034bcbe-b459-2d10-2a89-ecdeb4e53ff1
Part 2: DB Update logic
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/804165a5-c081-2d10-39b4-af09a680f591
Part 3: Extractor Logic
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1094e790-1d93-2d10-17ba-8b559bf0f75b
Part 4: Update Modes
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/5039632a-c398-2d10-0aaf-97167a3de753
Part 5: SD Datasource overview
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d07aa007-84ab-2d10-46ba-a5a2679f0d7b
Part6:Implementation methodology
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0508c20-84c1-2d10-2693-b27ca55cdc9f
Part7: LO datasource Enhancements
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a
Hope this helps.
Regards,
Mani -
Order is locked by user while filling setup table
Hi Experts,
Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled.
It showed that " Order xxxxxx is locked by user".
Because we have DSO concept in our CUBE, we didn't lock users.
But then the basis checked the users and removed from the system.
But still after removing the users, when we do the setup filling it still gets cancelled showing the same error.
Please help on this. Now i am stuck in filling setup section.
Thanks,
ThiliniHi,
Thanks. I followed your instructions and removed * , last two check boxes and selected sales org.
Now i am filling setup and its still running. I used a background job.
In sm37 it shows as "active"
But when I check in NPRT, It shows no logs were found.
I want to know that, is everything fine?
Setup table is filling right?
expects a reply please...
Thanks,
Thilini -
hi,
whilw iam filling setup table iam getting the error
<b>No extraction structure active or no BW</b>
in rsa5 and rsa6 i did the procedure
inlbwe that ds is active
i deleted the set uptable
after i fill the set up table
iam getting this error
iam experting a solutions from the experts
regards
kiran
plz response to my mail id [email protected]Hi Kiran,
It is not possible to modify the extract structure if
1. Set up tables have been populated during preparation and contains data
2. outstanding items in the extraction que (LBWQ) pending updates
3. Unfinished delta load or items in delta que RSA7.
What update method are you using ? Serialised V3 or the latest methods like
Queued delta ? what version of PI are u using. As i assume u also have latest PI or PI > 2001.2.
When u run SM13, make sure you select * or client and * for user. Also, the
date selection - make sure u enter date like 01011990 to include any
document that was posted. You will find some outstanding update records.If u
find any, try deleting them or else force the update using the collective
run.
If you have modified and you get an error, you may have to set back the
changes and reactivate the extract structure first and then do a collective
run ( search for a program with R*02)- this program forces any outstanding
updates for the modules under '02'. This program probably is the same in the
'job control' but am not sure. It is safe to execute this report which will
clear any o/s updates.
Carry out the changes using the following steps.
0. Lock transactions to be sure no postings are going to take place while
you are about to make changes.
1.There is a report you can run to check whethere changes to the extract
structure is possbile without errors. Report name is RMCSBWCC. Enter all the
comm tables related to purchasing ilike header, item and SCL while
performing this check. You should get a green light for permitting changes
to extract structure.Deactivating the extract structure has no effect so it
can remain active.
2. Delete the set up table for 02.
3. Performa collective run to be sure all qued data is taken into delta que
(even if u have never initialised).
4. Delete if you find any in RSA7 for the datasources in question. you will
lose the data but can be reinitialised later.
5. Run RMCSBWCC again to check if it is ok for bring about changes to the
extract structure.
6. If OK, make the changes necessary and save, generate datasource,
replicate and perform set up table before init run from BW. make sure no
collective run is started before completion of init load if you are using
serialised update.
hope this helps
award points if useful.
regards
Archna.
Maybe you are looking for
-
Problem with Adobe Updater - WebPremium CS3
Hello. Is anyone having trouble installing Adobe's latest updates to CS3 on Leopard (Macbook Pro)? It seems to hang on the Flash update. The update caused chaos on my Macbook Pro, constantly writing crash logs as soon as I quit a process another star
-
Attachments tab in Quotation and Opportunity does not work
Hi CRM Guru, When we try to attach a document in attachment tab by clicking ADD in quotation or opportunity in PCUI, pop-up to select a file to upload does not show up. We expect to see a browse button in the attachments tab upon clicking ADD which w
-
Why am i getting an error message saying i don't have enough privileges to access
When i try and sync my ipod to my itunes it give me that error message. And now there are multiple songs with "!" on them. Why is this?
-
Hi , Through APP it is generating vendor payment document number & & Spool no is not generating and session staus is showing canclled what could be the Problem Regards Sure
-
Cannot view inbox or email accounts hidden on top of list on iPad
I can't find a way to fix the settings in mail to allow the list of accounts to scroll down so I can open the inbox. Has this happened to anyone. I can see them 'greyed' out if I hold the scroll withnleft hand and attemptnto touch inbox with right ha