LO delta data tablename in source system

Does anyone know the table name where delta were stored after running the LO cockpit job to capture the delta?
Thanks,
Sharon

Hi ,
Refer this thread ::
LO data source initialization and delta table
Regards,
Arpit

Similar Messages

  • Want to transfer data from 2 source systems

    hi everybody ,
    i want to transfer data from 2 source systems into a info cube, how can we do that and  i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?

    Hi
    The solution given by Paolo will not work 100% correct.
    Even if you create ODS and with record number as key of  ODS the data in ODS will be record no 1,2,3,4,5,6,7
    But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
    For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
    Have a look at SDN threads on compounding-
    Re: Compounding
    Re: Tips on Compounding with Source System ID
    Hope it helps
    Regards
    Pradip
    (don't forget points)

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • Transaction Data from multiple source systems

    Hi BW,
    I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
    Please someone should help me out with the best practice on this.
    Thanx.

    Hi Dan,
    Do you mean use 0LOGSYS as authorisation relevant InfoObject?
    Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
    Regards.

  • How to load master data from 2 source system without using 0logsys as compo

    Hi Gurus,
    I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
    So, please help me out providing logic.
    thanks in advance
    Peter.

    Hi Peter,
    Can you brief me how did you resolved your issue?
    Regards
    Utpal

  • Compare dates coming form Source system & update higher one in target syste

    hi all,
             Mt reqt is to compare dates coming from source system & update highere one
    Ex--) E1EDP01 has been repeated 3 times in Idoc segemnt E1EDP20 , then date with higher one need to be updated in target system
    like 14/12/08
          15/12/08
          16/12/08
    Here 16/12/08 need to be updated first & then the other ones one by one.
    Anybody guide me in comparing these dates functionality .
    Send me the code !
    Regards
    Chaithanya

    Hi Michael,
                     I was unable to trace the exact issue of how to track  E1EDP01 Dates & compare it.
    I had created UDF to compare dates coming from E1EDP01 Segment
    following is my code --->
    // This UDF return 1 value for highest date and 0 for not highest date.
    DateFormat mydateformat = new SimpleDateFormat("ddMMyyyy");
    Date mydate1 = null;
    Date heightDt = null;
    for (int i=0; i <a.length; i++)
      if (a<i>.equals(ResultList.CC)) continue;
      try{
         mydate1 = mydateformat.parse(a<i>);
         if (i==0)
          heightDt  = mydateformat.parse(a<i>);
         if  (heightDt .before(mydate1))
         heightDt  = mydate1;
    catch(Exception e){}
    //result.addValue(  mydateformat.format(heightDt));
    for (int i=0; i <a.length; i++)
    try{
    mydate1 = mydateformat.parse(a<i>);
    if  (heightDt .equals(mydate1))
    result.addValue( "1");
    else
    result.addValue( "0");
    catch(Exception e){}
    My Problem here is in my Idoc if there are  Multiple E1EDP20 segments & here date would be repeated 4 times . I have to compare highest date out of 4 & send it to the target system.
    which I have done it, but here my problem is  the segment E1EDP01 is repeated & iam unable to find highest date individually to the node level.
    Sorry I should have explained this before only.
    Can Anyone guide me in comparing the date at segment level.
    Regards
    Chaithanya

  • How to load text data from multiple source systems.

    Hello Gurus,
    I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
    Please gimme some inputs to proceed.
    Thanks in advance
    Peter

    Hi,
    I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
    so try to load simply:
    material key, text, lang (optional)
    Hope it helps.

  • Delta loading master data errors in source system Message RSM340 quality

    Hi,
    I'm trying to load with delta  master data for standard data sources.
    In dev, everything seems fine.
    I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
    I have this problem for all master data loading.
    Should I install some infoobject from Bi Content?
    Thanks a lot !

    Hi,
    Check following threads
    [3003 + R3299 + RSM340] error messages loading an ODS
    Extraction failed with error Message no. RSM340
    BW Data Loading - Delta Processes
    Thanks and regards
    Kiran

  • Problems Delta Extractor after Homogeneous Source System Copy

    Hi,
    We have R/3 system landscape HUD, HUQ, HUP. And we have BW system landscape BWD and BWP.
    We connect BWD to HUQ and BWP to HUP.
    We made a homogeneous system copy from HUP to HUQ.
    We haven´t made any homogeneous system copy from BWP to BWD.
    We have applied the next OSS note after source system copy:
    325525 Copying and renaming systems in a BW environment
    184322 Procedure after DB copy of BW source system
    184754 Procedure after BW database copy.
    But we have problems in our BW Development (BWD), and we have the next Dump "MESSAGE_TYPE_X" when we can change any delta infopacket, the next text are from Dump:
    "MESSAGE_TYPE_X" C        
    "SAPLRSS1 " or "LRSS1F11 "
    "RSM1_CHECK_FOR_DELTAUPD" 
    I think that the problem is about inconsistencies between RSSDLINIT/SEL tables in BW side and ROOSPRMSC/F tables in R/3 side.
    Please could you tell how can i solve this Dump, because i can restrart and initial and delta packet for different Datasource and i can´t do anything.
    Thanks in advanced,

    Hi,
    We are upgrading our R/3 system from 4.7 to Ecc 6.
    While copying database tables we are using Clinet Carrier tool which is considering only clinet dependent tables. Hence we are loosing our BW delta queue entries in RSA7 of ugraded system.
    We found ROOSPRMSC and ROOSPRMSF tables and copying these 2 tables may resolve the issue and We copied and delta went fine.But we are not sure of only these are the tables to be considered.
    Please let us know what are the relevent tables to be considered to make the Delta to work while copying Data base tables from one system to another.
    Thanks in Advance
    Regards,
    R@ngzz

  • Different number of data records in source system and BI system

    Hi all,
    I have been using datasources 0HR_PA_0 and 0HR_PA_1.
    When I run and check the records in source system via RSA3 there are 4893 and 360 records respectively.
    When I extract the records into my 0PA_C01 cube, however, 3058 and 249 records are coming respectively.
    Furthermore, when I create a personnel record in source system, it is not extracted into BI cube.
    What may be the reason?
    I am looking forward to your suggestions.
    Regards,
    Dilek

    Srinath,
    I've created many new personnel records in source system and these records are displayed in the list of RSA3.
    However, these newly created records are not reflected in BI cube when I extract data via the specified datasources.
    I've checked whether there are some filters defined, however no filter seems to exist.
    By the way, I am using full upload; no delta!
    Regards,
    Dilek
    Edited by: Dilek Ersoz on Aug 14, 2009 1:45 PM

  • Error in Delta load; error in source system

    Hi,
    I'm extracting from 0FI_AA_11.
    Performed a full load.
    Then initialized without data transfer.
    When i run delta (0 records) , it fails with 'error in source system' .
    Strangely, when I run delta again in REPEAT mode, it runs succesfully.
    this is happening everytime i run delta.
    Please help

    FI_AA_11 is sure capable of handling delta.
    It does have some dependencies with master data and these are pretty awkward sometimes.
    I don't know when you are running your deltas (during opening hours from the office?) but in your process chain also the MD objects must be present.

  • CO-PA Delta load - Errors in source system RSM 340

    Hi,
    We are facing a unique error when we do a CO-PA delta load. The error message is as follows:
    "Errors in source system RSM 340,The selected data source is locked by another process RD 156"
    The load completes successfully with 0 delta records fetched. When we re - trigger this after sometime, the load goes through.
    Can anyone explain as to why this issue occurs ? Basically, looking at the root cause.
    We are pulling data from CE1XXXX table, the delta for which is pulled into BW with the setting of 30 minutes safety delta. Just wanted to understand how is it that in this scenario we are faced with a lock issue ? It is also confirmed that while the delta load is initiated the transactions are being passed into the CE1XXXX table.
    Thanks,
    Amit Mitra

    Hi PK,
    caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
    i think you get the error message as follows. file is in the client workstation as like.
    better you contact basis people. they will resolve this.
    hope this help you
    Regards
    Harikrishna N

  • How to restrict number of Data Records from Source system?

    Hi,
    How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
    Pls help,
    SD

    Hi SD,
    You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
    Regards,
    Pankaj

  • Info IDoc received with status 8 in BI but Data available in source system

    Hello Experts,
    I am loading Budget Period (attributes) into PSA in BI.
    Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
    Data source: 0PU_BDGTID_ATTR
    This is full load.
    I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Already looked this thread and googled also.
    Re: IDoc received with status 8.
    Check points:
    sm58 - NO issue
    BD87 in ECC (RSINFO Idoc status: 03) -sucessful
    BD87 in BI (RSINFO Idoc status : 53)
    ST22 - NO issue
    sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
    I am not sure if I am missing any thing.
    Thanks
    Rana

    Hi all,
    I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
    For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
    RS3 (R/3) - > 0 data
    ST22 -> no short dump
    WE05 (Idoc) - > everything is ok
    I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
    Any ideas?
    Thanks
    jak

  • To Load Master Data From Two Source System

    Hi All,
    I have a small question :
    - Can we load master data from two different source system say from flat file and R3 or any two different or similar source  system?
       If answer is "Yes", then how?? If possible step by step.
    Appreciate your valuable points.
    Thanks,
    Niraj Sharma

    Hi,
    Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
    I am getting below ERROR.
    Object DTP DTP_d55.......could not found in version A.
    I have  checked the Master data locally for source sys in compounding Tab of the key field.
    Please help..
    Thanks,
    Niraj

Maybe you are looking for