Load 0CALMONTH hierarchy without infosource?

Hi,
in our system 0CALMONTH is maintained with hierarchies and we see entries exist for 0CALMONTH.
But, interestingly, we couldn't able to find infosource for 0CALMONTH.
Could someone please let us know how this could be possible?
How 0CALMONTH hierarchy has entries without infosource?
( I read documentation & How-To document about loading hierarchy from flatfile using infosource).
Is there a way to add more entries into 0CALMONTH without infosource?
Is "loading hierarchy from flat file using infosoruce" the only way to load an hierarchy?
Appreciate any help.

Hi,
thanks for your reply.
well, I am manually trying to maintain hierarchy by adding new nodes from months 6/2008 to 12/2008 (currently,hierarchy is maintained with nodes until 5/2008).
--> I'm in the maintainance screen of hierarchy.
--> right click on top node & I selected insert characteristic (0calmonth)
--> Here, I expect to be able to select months from 6/2008 - 12/2008
But, in the pop-up window values, I don't see these months listed. How can I insert these months?
Please note that /BI0/SCALMONTH & /BI0/RCALMONTH tables are filled with these months.
Is "transferring gloabl settings" the only way for this?
hope it is clear & appreciate any help.

Similar Messages

Problem in Loading Material Hierarchy

Hi,
I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
The node name for ID 00005983 contains invalid characters
Diagnosis :
Node name DVD77ELR-D2 with node ID 00007774 contains lower case
letters or characters that are not permitted.
System response:
Processing was terminated
Procedure:
Change the node name so that it only contains permitted characters.
Procedure for System Administration
As a result the Request is in RED state.
Please suggest any solution ASAP.
Regards
Prasad
Note: Ponits will be awarded for fast and correct response.

Hi...
Thank you all for reply.
I have solved the problem. But this was not related to RSKC.
This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
Now the hierarchy has been loaded perferctly.
Regards
Prasad

Hierarchy without Transfer rules?

Dear All,
Can we load Hierarchy without Transfer rules?
*I know we can do this without Update rules but in the case of transfer rules?!!!
Awaiting early response.
Regards,
KS.

Hi,
Here, the question is -> when we load hierarchy from SAP source sys.? do we need or not?
But in TBW10 it is saying we can do hierarchy with and without transfer rules.
Regards,
KS

Error in loading a Hierarchy

When we are loading a hierarchy in the BW system, we get the following error :
Error in the hierarchy structure: see error log.
We tried activation of the hierarchy data source then rerun the load. Still it fails with the same error.
Please let us knwo if any one has inputs regarding the same.

Please go through the following SAP Notes.
[Note 1266877 - BW hierarchy error when loading|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1266877]
[Note 384945 - BW: Incorrect hierarchy extraction for 0REOBJ|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=384945]
You will also find plent of threads with the same issue. Just search with the key words from the Error Log.
Regards,
Gaurav

How to load a Hierarchy after a change in the R/3 system?

Hi All,
We have a hierarchy in BW hat we extract from R/3. But now they have added two new nodes to the hierarchical structure which is not being reflected in the BW version of the hierarchy. Can you tell me how to load into BW the latest version of the R/3 hierarchy with those two new nodes??
Thanks Much for any Input,
Reddy

Hi Reddy,
If you have modified just the function module to populate the hierarchy in R/3 then the hierarchies should load fine on BW. However if you have changed the datasource and there is a datasource(active) in the transport request in R/3 then you would need to replicate the datasource in BW and then load the hierarchy. Hope it helps.
Bye
Dinesh

Error while loading the Hierarchy from R/3 to BI.

Dear all ,
I am trying to load a hierarchy FROM R/3 to BI . When I am executing the Info package its showing an below Error.
Hierarchy object is u201CWBS elementu201D
The level of the node ID 01494179 does not suit the lev. of the higher lev. node
The level of the node ID 01494178 does not suit the lev. of the higher lev. node
The level of the node ID 01493822 does not suit the lev. of the higher lev. node
Could you please let me know what would be the reasonu2026u2026?
Regards,
Raghu

Hi
looks like there is some inconsistency in hierchy data you are tring to laod.
Check hierarchy in r3 if its ok, if yes try deleting complete hierarchy and reloading it.
You may also chose to adjust it manually
Regards
Sudeep

Error while loading the Hierarchy to 0GLACCEXT

Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
Thanks

Hi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).
The Long Error Message
Diagnosis
 The nodes NODEID = [00000194, 00001627 ] have the same node names
 NODENAME = '10000000950090 '. This is not allowed because neither node
 is a leaf and both nodes are assigned to the same characteristic
 0GL_ACCOUNT .
 Note that a maximum of 50 characters is available for message variables.
 The node name NODENAME = '10000000950090 ' might not be displayed in its
 full length.
System Response
Procedure
 Try to localize the problem. If the hierarchy is loaded from an SAP
 source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
What kind of potential inconsistencies will occur?
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

Flat File loading into Hierarchy

Dear Gurus,
I am trying to load a hierarchy from a flat file. I am not able to do it successfully.
I have a small doubt. Do we need to load the master data into the master data table before loading the hierarchy?
Explanation:
I have an info object zcountry and i had added zzone and zstate as external characteristics in hierarchy. the hierarchy structure should be country with 2 nodes zone1,zone2 and zone one should have 2 states under it as nodes. In this case do I need to maintain the master data in the infoobjects before loading the hierarchies with flat file.?
Node ID InfoObject Node Name Link Parent ID Language Short-Txt Medium-Txt Long-Txt
1; zcountry; CountryNode; 0; en; CountryNode; CountryNode; CountryNode;
2; zzone1; SouthZone; 1; en; SouthZoneNode; SouthZoneNode; SouthZoneNode;
3; zstate; AndhraPradesh; 2; en; AndhraPradesh; AndhraPradesh; AndhraPradesh;
4 zstate Karnataka 2 en Karnataka Karnataka Karnataka
5 zzone1 NorthZone 1 en NorthZoneNode NorthZoneNode NorthZoneNode
6 zstate Haryana 5 en Haryana Haryana Haryana
7 zstate Rajastan 5 en Rajastan Rajastan Rajastan
This is how the flat file looks like.
Kindly give me a solution.
Regards
Mohan Kumar.
Message was edited by:
 mohan kumar
Message was edited by:
 mohan kumar

Dear Gurus,
I also followed the same weblog but still i am not able to do that. That is the reason why I asked the question in that detail (with the data I am trying to load).
Regards
Mohan Kumar

Loading the hierarchy of GL account

Hi all,
I am a new to BW,could you tell me how to load the hierarchy of GL account in BW.

Hi,
I would like to know, whether you want to load the hierarchy with flat file or from R/3 ?
With Regards,
PCR

Load custom hierarchy (multiple ownership / parents)

Hi all
Lots of questions below, I just need some input on this..:) Thx. in advance..
I have a question regarding loading a custom Customer hierarchy from SAP CRM to SAP BW. The special thing about this hierarchy is that is a leaf (child) can have multiple parents. E.g.
- Customer C belongs to both Customer A and Customer B. (Shared ownership.)
- Furthermore I have the information that Customer A owns 40% of C and Customer B owns 60% of C.
Is this something that you see I can support in BW, by loading this hierarchy to 0CUSTOMER? Is this at all supported in BW to have leafs with multiple parents?
Let's say I have an infocube and I do not want the key figures for Customer C to sum up for all parents that owns this customer, but I still want to display the relations (e.g. display Customer C under both Customer A and B, but if you look at the result this should not add up twice). Furthermore do you know how I can connect the percentage to the specific relationship and show this in the report?
I have heard about this option called "Linked nodes", where the system creates a reference for a particular node to an original node. Thereby the possibility to display the subtree of a node multiple places in a hierarchy. But I do not know if this is supported for leafs as well?

No one?

Loading a website without opening a new web-browser

Can someone tell me how to load a webpage without opening a new web-browser, having it displayed on the current one...
I have tried the following code but it opens up a new browser instead... :
getAppletContext().showDocument(new URL("http://www.angelfire.com"), "_blank");
Million thanks

getAppletContext().showDocument(new URL("http://www.angelfire.com"), "_self");

Firefox won't load my pages without freezing. FF3 never did that

Whenever I go onto the internet to visit any site, FF4 won't load the pages without freezing. I thought it was my internet, but then I downgraded back to FF3 and it worked just fine. For some reason it is only FF4. Internet Explorer works fine too, though I would prefer firefox.

Hi iAmBacon,
Have you tried starting Firefox in [[Safe Mode]]? It sounds like there might an addon or extension that is causing some problems. If it works in Safe Mode, then follow the instructions in the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting article]. It will show you how to enable them one by one until you find the culprit. Hopefully this helps!

Can we load Transaction data without loading Master data, explain w.r.tSID

Can we load Transaction data without loading Master data, if so can you explain me how and when Surrogate Ids/ Dimension Ids gets generated.

Hi,
We can load the transaction data without loading master data.
But for loading performance issues it is recommended not to load the transaction data first.
Every infoobject in the BW is identified by SID, that means which we are loading the transaction data, considering a scenario for an infocube, the system will identify the infoobject by existing sid against that infoobject in the bw and correspondingly create DIM id's.
Now consider the secnario where master data is not loaded and transaction data is being loaded.
Now the system should have sid to identify and infoobject and to create DIM id ( which is the combination of sid's of the characterisc in it)
And as the sid's are not yet created i mean as there is no referece for the master data, the system will first create the sid for that infoobject it means it will create a copy of the master data in that infoobject nd then create the dim ids based on it and then load the data.
Here the additional task of creating sids are also being done during loading the transaction data which hinders the loading performance
I hope this is clear5 now
Janardhan Kumar

Error loading Internal Hierarchy

I am trying to load internal Hierarchy in the order of - Region Code, Country Code, Representative Code.
I could complete the process but getting the below error finally when I check for successful data load from the file in to the BI system
@5C@ Value 'England' (hex. '45006E0067006C0061006E006400') of characteristic TS_CTRCD contains invalid characters @35@
Can any one explain what the above error message means and possible fix.
Thanks,
PB

Hi
I think you have some Extra permitted chars involved in the data. Try to See the same in the PSA and execute them for at Tcode RSKC.
See the blog for clear understanding about HEx Values.
Loading Text Files(.TXT) into BW with HEX option
Hope it helps

Load 0CALMONTH hierarchy without infosource?

Similar Messages

Maybe you are looking for