Load 0SD_C03

Dear Experts,
                       Good Morning !
                       I want to load data from Header and ITem for the Billing data source in to the sales cube 0SD_C03.data flow is ready .here I have two infopackage for each data source one for Full load and one for Delta .SO want to ask you how should I proceed futher to load .Can I run the DTP with only using FULL infopacke .
what should be the sequence of this.means whcich should I shedule first ,is it header and then item ,or header infopck shedule first then crun the dTP of this header ,and then the item sheduling ,so what should be the proper sequence .Request you to PLease provide me the steps ,thanks in advance .

Follow these STEPS :
1.  RSA5 : Activate the required data source.
2.  RSA6 : To check activated D.S.
3.  LBWE : dlt data in setup table.
4.  RSA7 : dlt data in delta queue.
5.  LBWE : adding fields to e.structure from comm.structure.
7.  RSA6 : If u want to do any changes go to RSA6 (first click on Inactivate then do changes after dat activate the D.S.)
6.  replicate in bi.
7.  SM01 :lock the t.codes (inform to BASIS team).
8.  fill setup tables oli13bw or SBIW.
9.  run ip with INIT then only it enables the delta..
10.  run dtp.
After replication in BI side create the info objects based on source system fields then map in transformation and create the info cube and assign the dimensions(based on ur requirement like 1:1 or 1:many)
Edited by: Balasubramanyam on Mar 8, 2012 5:47 AM

Similar Messages

  • I am loading the into 0sd_c03 infocube.

    Hi All,
    I am loading the into 0sd_c03 infocube.
    But i am facing some problem while loading the data.
    Requests (messages): Everything OK (Green color)
    Extraction (messages): Errors occurred (Yellow)
    Under this :
    74626 Records sent(742626  Records received) it is in yellow color.
    Transfor (IDOC and TRFC):Missing messages are warnings
    Data Package 1 : arraived in BW ;Processing : Data packet not yet processed.
    Update (0new/0changed) :warning received.
    When i am check the ST22 It is dump.
    Thanks
    Ram

    Hi,
    What was the Dump, pls provide here...
    Have u deleted the indexes before loading....or U can try with right clicking on each datapacket which was in yellow/red and select manual update...it takes sometime to finish and refresh later
    Chk in SM58 also for any idocs pending, we have to push these and then manual update....
    rgds,
    Edited by: Krishna Rao on Jun 24, 2009 12:29 PM
    Edited by: Krishna Rao on Jun 24, 2009 12:29 PM

  • Best Practices for Loading Data in 0SD_C03

    Hi, Guru, I want to know which is the best practice to have information about Sales, billing, delivery. I know it has this Datasources.
    • Sales Order Item Data - 2LIS_11_VAITM
    • Billing Document Data: Items - 2LIS_13_VDITM
    • Billing Document Header Data - 2LIS_13_VDHDR
    • Sales-Shipping: Allocation Item Data - 2LIS_11_V_ITM
    • Delivery Header Data - 2LIS_12_VCHDR
    • Delivery Item Data - 2LIS_12_VCITM
    • Sales Order Header Data - 2LIS_11_VAHDR
    Do I have to load all this Datasource to Infocube 0SD_C03 or I have to create copy of 0SD_C03 to mach with each Datasources.

    Hi.
        If you just want to statistic the amount or quantity of the sales process,I suppose you to create 3 cubes and then use a multi provider to integrated those 3 cubes you created.for example:
        2LIS_11_VAITM  -> ZSD_C01
        2LIS_12_VCITM -> ZSD_C02
        2LIS_13_VDITM -> ZSD_C03
    In this scenario,you can enhance the 2lis_12_vcitm and 2lis_13_vditm with sales order data,such as request delivery date etc..and then create a Multiprovider such as ZSD_M01.
    Best Regards
    Martin Xie

  • Load data to 0SD_C03 infoCube issue with 0MATERIAL

    Hi experts,
    I m loading data to 0SD_C03 InfoCube and while executing the DTP I faced the erreur saying that the material data in the PSA (2LIS_11_VAITM) exceeds the length of the 0MATERIAL InfoObject! knowing that the source field MATNR and the InfoObject 0MATERIAL have the same length = 18.
    I tried also to load the master data into the 0MATERIAL InfoObject but the DTP fails ...
    Thank's for your help.
    Abdess,

    Hi Karaman,
    Through user exsit, I tried to modify the data from 2LIS_11_VAITM and replace the material number by another more short. in the InfoPackage selection, I restricted the data from 2 LIS_11_VAITM, plz see below:
    When I execute the DTP to load data into 0SD_C03, it gives me the same error!!
    Any help please.
    Abdess,

  • 0SD_C03 - Product Category Not Loading

    I have an issue where the field 0PROD_CATEG is not being populated in cube 0SD_C03. Looking at the data from 2LIS_11_VAHDR I see that its trying to map 0PROD_HEIR -> 0PROD_CATEG.
    Here is the code for the mapping:
    The problem is that product category is all ways blank. The COMM_STRUCTURE-prod-heir is allways '999999999999999'.
    I see that product category is an master data info object but we don't use product category. I was wondering if I could swap out 0PROD_CATEG for 0PROD_HEIR but since 0PROD_CATEG is a part of the Key im not sure if its that easy (Or maybe it is).
    At the end of the day I want to be able to report on HEIR or Category and say for the month of Jan we sold x number of widget A, B, C. The product category or Heirarchy can help with this if I can get it loaded.
    Any ideas whats going on with the code and can I just remove product category and map product heirarchy instead?
    Thanks,
    larry

    Hi Larry,
    are there 16 Key figures defined in the target? If so is this the reason that 0PROD_CATEG is concactenated in the target? i.e. 16 KF's is the limit when mapped directly in a standard DSO, you can check the limitations in the following note....
    1837308 - FAQ: Technical limitations of InfoProviders and Characteristics in BW
    You could consider mapping some of the KF's as standard data fields if so,
    Thanks,
    Colm

  • Delta load error in quantity of sales overview cube 0sd_c03

    Hi All,
    The quantity(0quant_b) is fetching properly for full upload.But when delta load is done 0quant_b is not fetching correctly.
    For example,
    quantity was changed from 100 to 120 for an order. When delta is run, only 100 is uploaded instead of 120. In PSA it is showing 120. If a full upload is run it is fetching 120.
    I was wondering what could be the reason for a mismatch. I would really appreciate for any clues provided.
    Thanks,
    Jerry

    Hi Jerry,
    Please understand the following:
    If you have the initial quantity in the R/3 system as 100 and this is loaded to the BW system in the your model(PSA then Infocube) there is no mechanism in your model where in delta can be handled.
    The quantity is now changed to 120 in R/3 side now you are expecting this to be captured into the InfoCube which in your model is not possible.
    The reason is that in BW the delta handling will be as follows(taking your example):
    100 is the initial quantity and this will be flown in to the target with no issues.
    Now the quantity is changed to 120 in R/3 side, this will be flown till PSA as 120 itself.
    But a field called ROCANCEL will be populated as New record.
    This should be mapped to the field RECCORDMODE in DSO on which the delta will be captured.
    where I mean to say DSO is mandatory in between. In DSO as I told in the previous post the delta handling will be done as the (new image - before image), in your case it is 120 -100 = 20.
    As the property of the InfoCube is addition this 20 will get summed up in to the InfoCube making the quantity 120.
    If there is no DSO in between this record will not be considered in the Infocube so you will be left with 100.
    Hope this explains your query in detail.
    Thanks & Regards,
    Vishnu

  • Currency conversion error in Update rules for 0SD_C03

    Hi All
    I have freshly installed Sales Overview cube 0SD_C03 from BI Content(3.x version) and when extracting data from datasource "2LIS_13_VDITM" there is an error "Error: Conversion foreign curr. -> local curr.: 0090000000 20080516 M -> SGD".
    Till PSA data is loading fine, there is error while loading from PSA to cube(ie. in Update Rule).
    Checked in the PSA for the errored records, all the records which have 0(zero) as amount are green and the rest of them are errored with the above message.
    When checked in the manage cube there are added records but the request is red.
    Please let me know if some one as the clue.
    Regards
    Jayant

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Loaded data is not yet visible in Reporting (see long text)

    hello
    all
    I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D(    23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
    as I solve this problem ?

    Jurado,
    What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
    Probably if you look closely you would know the answer.
    Goodluck,
    Alex
    (Arthur Samson)

  • Cube 0SD_C03 Development

    Hello Experts,
    We are installing the BI content cube 0SD_C03 which contains the sales, delivery and billing in a single cube. Now the user wants the report on sales order amount in which he requires the actual delivery date also. Here the actual delivery date should be taken into account from the delivery datasource. But if the sales order is loaded prior and the delivery for the same sales may be after 3 days or 10 days then how come the report gets generated with the correct values. Please let me know how to build this in a better way.

    Hi,
    I think for every sales order there are planned delivery date and actual delivery date available.
    So in datasource 2LIS_11_V_SSL
    Extraction SD Sales: Order Delivery
    Requested delivery date of an order schedule line - MCEX_W_LFDAT
    Confirmed delivery date  MCEX_B_LFDAT
    Actual goods movement date of a delivery MCEX_I_WADAT
    Actual delivery date of a delivery MCEX_I_LFDAT
    So you can map above fields in cube and in reports.
    Respective content field you can check suitable object in RSOSFIELDSMAP table.Else create Z fields and map them.
    Thanks and regards
    Kiran

  • Initial load flag

    Hello!
    I would like to separate records (apart from later deltas) that come with initial load to infocube.
    To be precise for 2LIS_12_VCITM --> 0SD_C03.
    Any idea apart from creating new rules and filling a special field with init/delta flag?
    Tnx Gorazd

    Hi,
    Everything depends what is the reason, you want to seperate this load.
    I can propose you 2 solutions
    1) Loading without any transformations (1:1 mapping with data source)
    Data flow:
    Data Source -> Acquisition layer DSO (1:1 mapping) -> Infocube (1:1 mapping)
    2) Loading with transformations
    Data flow:
    Data Source -> Acquisition layer DSO (1:1 mapping) -> Propagation layer DSO (put all transformation here) -> Infocube (1:1 mapping)
    Using one of these scenario makes you sure that in case of any "repair" load you can just pull delta for further layes instead of deleting and doing full reload.
    Regards,
    Dariusz Lewandowski

  • Flat file data loading - Important - Urgent

    Hi all,
    I need a solution to carry out in my project.
    1) I am loading historical data (Header & Line item) from flat file to sales overview cube (0SD_C03) through Infosources 2LIS_11_VAHDR &
       2LIS_11_VAITM.
    2) in header infosource, the datatype for 0SALESEMPLY is NUMC.
        but the data is alpha numeric values (example : 150AR) in the flatfile for this infoobject.
        so it is loading only the numerical value to infocube ( i.e., 150)
    3) so in this situation what has to done to load the entire value (i.e, 150AR) to infocube for this object.
    I have another situation for the same infocube and loading data from same header flatfile:
    1) in header flatfile i have data for Local currency and Document currency fields.
        but the data is not loading for these two fields in theinfocube and the inobjects 0LOC_CURRCY and ODOC_CURRCY are not  
        available  in the infocube.
    2) so in this situation how can i add these two objects and pull data into these objects.
    Pls do let me know asap and update me your contact no so that i can reach you directly by phone.
    Thanks & Regards,
    Kishore

    Hi,
    for first question you need to convert the IO type to Character type. and give appropriate length based on the max.length of that field in flat file. and do all necessary steps like activating IS and all.
    for second question you need to add 2 fields in cube level. b4 that pl veryfy whther the IO s are available in your system or not. if not create them first and assign in IC and realod the data again.
    regards
    ramnaidu

  • Regarding Master Data loading In BI 7.0 for  SD Module

    Hi Guys ,
    Iam new to BI 7.0 Impln.Can anybody  help me how to load the Master data for cubes like 0sd_c01,0sd_c03.I have activated the MD ds like 0Plant_Attr,0Plant_Text,0Master_attr,0master_text and replicated into BI 7.0.After that i need help from u guys.what are the steps required to activate the Masterdata.
    thanks,
    Chinnu

    Hi Chinnu,
    1)By replication I think you mean to say that you now have the datasources 0Plant_Attr,0Plant_Text,0Master_attr,0master_text in BW now.
    2)You then have to complete the mapping to the corresponding Infosources
    3) activate the infoobjects 0PLANT, 0Master.
    4)Load your master data
    regards,
    Vinay

  • Error in Transformation generated by Update rule 0SD_O01 to 0SD_C03

    Hello Friends..
    I created Update rules from 0SD_O01 to 0SD_C03, and then, generated a transformation to do loads.
    But when I do this the following error is happening in my routines
    E:The data object "COMM_STRUCTURE" does not have a component called "RATE_TYPE".
    Could you help me to solve this?
    Thanks and best Regards

    Hi,
    Follow the steps:
    1. Right click on the Cube 0SD_C03 and goto Additional functions->Create update rules.
    This option will create update rules from Cube.
    2. Enter the DSO name 0SD_O01, in the DSO option box.
    This will create your update rules.
    If you want to schedule a load from DSO to cube go to tcode RSA12 and search for your DSO 8SD_O01 and create Info Package.
    Tip: You can use either Transformations or update rules to update to data targets in 3.5 or 7.0 as well.
    If still in doubt just reply.
    Cheers,
    Satisfied!! Please reward.

  • Validation of 0SD_C03 data with R3 Tcodes

    Hello Gurus,
    I have loaded data into 0SD_C03 and 0SD_C01. Could anyone pls tell me what are the tcodes in R3 i can use to validate these data.
    thanks in advance

    hi,
    check this
    http://www.sapgenie.com/saptech/transactions.htm
    Sales & Distribution
    Sales order / Quote / Sched Agreement / Contract
    VA02         Sales order change
    VA05         List of sales orders
    VA22         Quotation change
    VA32         Scheduling agreement change
    VA42         Contract change
    Billing
    VF02         Change billing document
    VF11         Cancel Billing document
    VF04         Billing due list
    FBL5N       Display Customer invoices by line
    FBL1N       Display Vendor invoices by line
    Delivery
    VL02N       Change delivery document
    VL04         Delivery due list
    VKM5        List of deliveries
    VL06G       List of outbound deliveries for goods issue
    VL06P       List of outbound deliveries for picking
    VL09         Cancel goods issue
    VT02N       Change shipment
    VT70         Output for shipments
    General
    VKM3, VKM4    List of sales documents
    VKM1        List of blocked SD documents
    VD52         Material Determination
    hope this helps.

  • Zero value appears in 0sd_c03 from 2lis_13_vditm for some conditions

    Hi friends,
    I am executing the DTP of 2lis_13_vditm to cube 0sd_c03. This is standard and i have not made any changes.
    while loading i am getting values of some values as Zero.
    To be more specific, i have the customer group has a value equal to "EX". and in the PSA for the Customer group ="EX" if the Document currency is same as Statistic currency the net value is comming properly as is found in PSA.
    But if the Document currency and statistics currency are Different. i.e. if Doc. Curr = "INR" and Stat.Curr ="USD", than the value appears in the netvalue of 0sd_c03 as 0.
    Has anyone faced this issue before.
    Is there any solution for this issue.
    Regards,
    Mariadas

    Hi
    Is there any routine in the transformation. Plz once check whether there exists any routine or not.
    Thanx & Regards,
    RavIChandra

Maybe you are looking for