Load and control youTube video

I would like to load a youtube video in a flash movie.
I have absolutely no idea how to do this.
I have the URL of the movie and I have the target movieChild.
All I want to do is to load and play the video frm within the
fash movie I have created.
Can anyone help me. I am using FlashMX. and I haven't used it
for a while (and I am no computer expert.)

When you create the PeaBee embedding code...note the "edat"
variable.
Put that as a _root variable in your FLA. For example:
_root.edat="FA18987ECB...
Then, load the swf from
http://player.peabee.com/ (the
address is
automatically translated to a SWF).
You should now have a fully functional player inside your own
code.
Patrick
dorianw wrote:
> The video is mine, so it's not a question of having the
video on my site. It's
> more a question of using youtube to store all my videos
and calling them up
> when I need them but in the size i need . I've just
tried PeaBee but the video
> comes out jerky and I can't seem to use it from within
the swf I create.
>
http://www.baynewmedia.com
Faster, easier, better...ActionScript development taken to
new heights.
Download the BNMAPI today. You'll wonder how you ever did
without it!
Available for ActionScript 2.0/3.0.

Similar Messages

My google calander won't let me add new events; my pandora won't load; and a youtube video pops up randomly on both these sights when I refresh the page.help!!

These seem to be problems with firefox, but I am not computer savvy so I don't know for sure. I have cleared history, cache, cookies and rebooted the computer. Other users of the computer said it was acting funny but provided no details. Sometimes also a tab just randomly closes. Any help would be appreciated.
Thanks!!

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

An easy way to download and convert YouTube videos to MP3 on Mac

An easy way to download and convert YouTube videos to MP3 on Mac
I’m always attracted by the wonderful YouTube video files, and can’t help myself extracting the amazing audios to save them as MP3 to playback on my iPod and other MP3 players. I guess some of you may want to do the same thing as I do, but have not found an available application to achieve this goal, if so, I would like to share my experience here, and sincerely hope you can get what you need from my post.
The software I’m in use is Pavtube YouTube Convereter for Mac, which has performed very well on all the work I let it do. It can finish downloading and converting YouTube videos simultaneously in a few clicks. Besides YouTube, it can also deal with the video files from many other video sharing websites, like MySpace, Yahoo! Video, Google Video, Metacafe, Reuters, etc. Okay, let’s go back to the point to see how to use it to download and convert YouTube videos to MP3 on Mac in detailed steps.
Step 1: Add YouTube URL
Step 2: Select MP3 as output format
Copy and paste YouTube URL to the textbox after “URL”, meanwhile, if you want to save the original FLV YouTube videos, you can tick “Save FLV File”. Click the drop-down icon at the end of “Convert To” to select MP3 as output format. Furthermore, if you want to save the output MP3 file in your specified file name, you can type it into the textbox after “Save As”, and also, you can click “Browse” button to decide where to locate the output MP3 files.
Step 3: Adjust audio parameters
Click “Custom” button, then the following interface will show up, on which you are able to adjust audio parameters like codec name, sample rate, bit rate and audio channels.
Step 4: Start downloading and converting simultaneously
As soon as all the above steps are finished, you can click the “OK” button in step 2, after that, downloading and converting YouTube videos to MP3 will start automatically. Once completed, you can click “Open” button in the interface as below to get the output MP3 files with ease.
[img]http://www.pavmac.com/pic/091201YouTubeconvertermac/youtube convertermac-conversion091201.jpg

Select all songs ctrl A, right click - Download.

Download and import YouTube videos to iMovie for editing

Download and import YouTube videos to iMovie for editing
YouTube always provides people with raw video materials on all sorts of things happened worldwide in real time. Video lovers are fond of downloading these files as private collection, even using video editors like iMovie to do further editing of their favorite ones, so as to import them to portable devices like iPod, iPhone, PSP, Blackberry, etc. for playback, or upload to their own websites to share with others, or do something else as they like.
However, not all the people have found a proper way to download YouTube videos, not to mention how to add these files to iMovie for editing. YouTube videos are in the format of FLV, which is not a workable format in iMovie, so if you want to import YouTube videos to it without trouble, you should convert FLV files to iMovie compatible formats such as MPEG-4 and MOV in advance. With the special intention of solving these two problems, this guide will show you how to download YouTube videos and import them to iMovie for editing step by step. If you are in need, just feel free to go along with it.
Step 1: Download, install and run Pavtube YouTube Converter for Mac
This converter can process downloading and conversion simultaneously. Once you launch it, the interface below well pop up.
Step 2: Add URL, select output format and set save path
Press tag “Add URL” in the above interface, and then the following window will appear. Just copy and paste the URL of the YouTube video file which you want to download and convert to the text box after “URL”. Then select a supportable format for iMovie by clicking the drop-down list of “Convert To”. Here I choose MOV for example.
Afterwards, you can insert the storage file name in the text box of “Save As”, if not, the program will generate one automatically. Here I save my file as “mycollection”. Meanwhile, you are allowed to hit “Browse” in the opposite side of “Save To” to specify the destination folder. By the way, if you want to save the original FLV files, you are allowed to tick the checkbox “Save FLV File” to achieve this goal.
Step 3: Custom
This program enables you to adjust video and audio parameters like codec, bit rate, aspect ratio, frame rate, sample rate, and channels, so that you can change them randomly according to your own demands. Generally speaking, the options which refer to values are always in condition of the larger values, the larger file size, but better quality. Do remember click “OK” to save your custom settings.
Step 4: Download and convert
Once all the settings are done, you can click “OK” button to start. The following window will show you the progress of downloading and conversion.
Step 5: Import the output MOV files to iMovie
As soon as the YouTube video files have been downloaded and converted to MOV or other iMovie workable format, you can click “Open” at lower right corner of the above interface to find out the output files. Afterwards, launch iMovie, and click File > Import to add the output files to iMovie for editing.
Tips:
1. This program supports batch tasks so that you can download multiple YouTube video files in batches at a time.
2. Pavtube YouTube Converter for Mac adopts multi-threading technology, which makes its download speed is faster than any other similar YouTube downloader.
3. Besides YouTube.com, it can also automatically detect and download online videos in the format of .flv, and f4v from many other video-sharing websites, like Yahoo Video, Myspace, Google Video, Fox and more.
4. It also provides users with conversion function, with which you can convert any YouTube FLV/F4V files to other formats like MP4, MKA, WAV, AC3, MKV, FLV, MP3, M4A, 3GP, AVI, MOV, MPG, etc. at will.
5. If you only use it as a YouTube downloader without format conversion, you can take it as a piece of freeware.
All right, this guide is ending up now; hope it will do you a favor while downloading video files from YouTube as well as importing them to iMovie for further editing.

It's a clip from CNN (with all credits etc. added). When one refers to it as a clip posted on "YouTube", then people understand the quality will be poor.
I've watched television go from everything shot on a tripod with clean, meticulous editing rules, to almost anything goes. It has to do with cultural reference.

Download and convert Youtube video to MP3---Just with one click

Download and convert Youtube video to MP3---Just with one click
Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
Download, convert Youtube to mp3?—yes, you can.
Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
Step one: Install a Youtube Converter for Mac as follows:
Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..

Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

Loading and Playing 2 videos at the same time

Hello everyone
I'm having a problem on loading and playing two videos at the same time on XletView.
The background video, I'm loading by editing channels.xml that is located at config folder into xletview folder. I've just to add the file path and when i start the video it starts playing.
But now, I have a problem. I have to load a file that is into my HD, and play it at the same time of the main(background) video.
Do anyone know how to do this?

anyone?
PowerBook G4 1.67 GHz Mac OS X (10.4.7) 1.5 GB ram

SQL Loader and control file changes for different users

In the front end of my application I can select a data file and a control file, and load data to the table mentioned in .ctl file. Every user who logs in uses the same .ctl file and so loads onto the same table. Now I want the user to load data onto the table in his own schema. I can get the username of the user currently logged in and i want to insert it into that username.table. So can i copy the contents of the .ctl file into a variable, modify it into username.table in that string and pass that variable as a parameter to the sqlldr command instead of the .ctl file.
Or is there a better way how I can modify the same control file everytime to change tablename to username.tablename in .ctl file and pass to sqlldr to load data to table in local user schema table.
Thanks and Regards

Thanks for the reply .. user do have their user credentials but only for the application ... but all users use a common loader and control file once they log into the application. So irrespective of which user is logged in he selects the same control file and loads to the same table mentioned in the control file .. i instead want user to be able to load to the table in control file but into his schema like username.tablename instead of just the tablename mentioned in .ctl file.

My iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for becaus

my iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for because i dropped my last 5s and the glass shattered and i didnt have any insurance. so now it seems like i am out again. i was sold on the fact that the fingerprint sensor would stop that from happening but they can just reset the phone and have it as theirs new. is there anything i can do to get my phone back.

If you set up your phone correctly, it is still protected by the Activation Lock and can be used without knowing your AppleID and password.
Here are some more things about that:
What if your iOS device is off or offline?
If your missing device is off or offline, you can still put it in Lost Mode, lock it, or remotely erase it. The next time your device is online, these actions will take effect. If you remove the device from your account while it's offline, any pending actions for the device will be cancelled.
How do you turn off or cancel Lost Mode?
You can turn off Lost Mode by entering the passcode on your device. You can also turn off Lost Mode on iCloud.com or from the Find My iPhone app.
copied from If your iPhone, iPad, or iPod touch is lost or stolen

Problem loading and playing samsung videos in elements

Samsung videos will not play in elements

hibernian
No enough information to help you. Answers will be in the details.
1. What version of Premiere Elements are you using and on what computer operating system is it running?
2. What Samsung device is recording your videos that you want to edit in Premiere Elements?
3. What are the properties of those videos, including video and audio compression, frame size, frame rate, variable frame rate, interlaced or progressive, file extension, and pixel aspect ratio?
4. What are you or the program setting as the project preset to match the properties of your source media?
5. Are you getting any error messages associated with "problem loading and playing samsung videos in elements"?
6. Is there a problem loading and playing both video and audio or just video or just audio?
Let us start here and then we can plan troubleshooting strategy.
Thank you.
ATR

What do I need to download and save YouTube videos to ipadmini?

how do I download and record YouTube videos to my iPad?

See if this still works
http://www.macworld.co.uk/how-to/ipad/how-download-youtube-videos-your-ipad-so-y ou-can-watch-them-offline-3441965/
This is the Mac Mini desktop forum. I requested your posted be moved to the iPad forum

Crackling and popping sound when playing music and watching youtube videos

there is a crackling and popping sound when i watch videos on youtube or play music/videos using vlc media player and windows media player. recently it has gotten to a point where it happens when windows is starting up or even when the laptop is required to play a sound for example when i plug in a removeable hardware such as thumbdrives

Hi @donnabail ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 2000 Notebook and getting a buzzing or popping sound while playing music and watching Youtube videos. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook that might have caused this.
You can try this
1. Right click the Speaker icon in the bottom right corner.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
What happens if you right click on the video while playing a video and take the check out of hardware acceleration. Shut the browser down and restart the notebook.
Have you checked for an update on the Active X.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Update fails and Embedded Youtube videos doesn't load

Problem 1: All update (beta, RC) fails in my computer. After download, when I click in apply button, Firefox closes and a process "firefox.exe"starts with (~2.800 kB) and nothing happens. Every time and every versions in my 2 computers (Vista and Seven). It occurs since ~10 version (9, 10, 11... i don't remember.
When I download the exe from Mozilla, the update works.
Problem 2: Since the ~10 version or flash version, mostly embedded youtube videos doesn't load in firefox (in all pcs again). In youtube site it works, but embedded only shows a black square. In Google Reader it occurs all the time.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
If there are problems with updating then best is to download the full version of the Firefox installer.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
*http://kb.mozillazine.org/Installation_directory
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

"Could not load movie" with YouTube videos.

Hi there,
In both the past and present I have had much difficulty with playing many YouTube videos on my iPod touch 4. This happens to be the case no matter if I am in the YouTube app or on the mobile YouTube site in safari. I will try to play a video to watch it and often times I blue box will pop up saying 'could not load movie'. This makes video viewing and sharing quite difficult! Please help! Thank you very much!
- Samuel Amos

Here is an explanation for you for the "could not load movie" error, which I have also received on my iPad.
If you run across this error on your iDevice, keep the following in mind:
This is taken from another site, so I will quote:
"Most of the time its due to the age of the video upload, this one for example was done back in 2009 which was 2 years ago now. YouTube as you know relies heavily on Flash for video playback which is not compatible with the iOS range.
However to combat this, YouTube did work on converting chunks of videos to H264 playback, but by default the entire backlog of videos did not go through this conversion process...so you will find the odd video out there that does not play.
I believe though (and please someone correct me here if i am wrong) YouTube by default now encodes uploads in H264 as well as flash and a few other formats for multi-platform enjoyment :-) "

Gray loading screen on youtube videos

When i try to play YouTube videos, there is just a gray screen in the video box and the loading icon just continually spins. When I pause it, the loading icon goes away. There is no error message. YouTube videos work on Chrome. It is not a black screen, it is clearly gray. YouTube updated or something, and I think it might have something to do with this

'''[https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings Refresh Firefox]''' {web link} is a '''LAST RESORT ! !'''
Refresh Firefox - reset add-ons and settings
If you're having problems with Firefox, refreshing it can help. The refresh feature fixes many issues by restoring Firefox to its default state while saving your essential information like bookmarks, passwords, and open tabs. Your ------------------------------
System Details shows;
Installed Plug-ins
Shockwave Flash 17.0 r0
Adobe Shockwave for Director Netscape plug-in, version 11.6.4.634
Adobe Shockwave for Director Netscape plug-in, version 12.1.3.153
Adobe Shockwave for Director Netscape plug-in, version 11.6.8.638
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''Version 17.0.0.169<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''Version 12.1.7.157 http://get.adobe.com/shockwave/'''

SQL Loader and control file

I know I've done this before but, I don't use SQL Loader often and I'm having issues getting a file to load.
The table has 6 columns in it - one of which is a timestamp.
I was having issues loading it initially with date format issues. I ruled out any issues with the timestamp format by simply loading a dummy table with some timestamp based data and had no issue.
So - I think the issue is around the fact that the table I'm loading's first column being a value I'm attempting to default with a sequence when loading and - that I'm screwing up something there.
Table is as such:
CREATE TABLE ACS_IPS
    (seq_ips NUMBER,
    col2   VARCHAR2(100),
    col3 VARCHAR2(100),
    col4    VARCHAR2(100),
    col5 TIMESTAMP,
    col6    VARCHAR2(100),
    col7    VARCHAR2(100),
    col8 DATE DEFAULT SYSDATE NOT NULL,
    col9 VARCHAR2(30) DEFAULT USER);The control file is:
load data
truncate
into table acs_ips
fields terminated by ","
trailing nullcols
    seq_ips "seq_ips.nextval",
    col2,
    col3,
    col4,
    col5 TIMESTAMP "YYYY-MM-DD HH24:MI:SS.FF9",
    col6,
    col7
    )The sequence column isn't in the file being loaded... and - there are additional columns that are defaulted on the table that aren't in the control file.
Any help is appreciated... The error I'm getting is:
Rejected - Error on table CAMS.ACS_IPS, column ACTION_START.
ORA-01841: (full) year must be between -4713 and +9999, and not be 0

Yeah - not sure that clears it up...
The sequence in my table is the first column - and - I think that's the problem... the sequence is being loaded as the first column in the control file but - it's not in the file being loaded so - it's skewing (again - I think??) the data being read in - which is why I'm getting the timestamp issues on the one column (it's actually reading the next column in the file vs. the actual timestamp one).
If that's the issue - I'm not sure how to avoid it without restructuring the table to stick the sequence physically at the end. I'm certain that's not necessary and - I'm overlooking something that's otherwise simple but evading me.

Load and control youTube video

Similar Messages

Maybe you are looking for