Load anlysis

HI,
upon analysis of a load i found out tht i need to divide the datapackets interms of no.of records... so as suggested tht psa partitioning wud b fine but if i partition the psa , this will affect all the loads so plzz suggest or any oss note if u knw.
thanks

Hi,
Try this.
SAP Note 138794 Extraction parameter on BW/OLTP
SAP Note 130253 General tips on uploading transaction data to BW
SAP Note 365762 Loading data Pre-analysis of (performance)problems
Note 409641 - Examples of packet size dependency on ROIDOCPRMS
Note 417307 - Extractor package size: Collective note for applications
Thanks,
JituK

Similar Messages

How to Tune the Transactions/ Z - reports /Progr..of High response time

Dear friends,
in <b>ST03</b> work load anlysis menu.... there are some z-reports, transactions, and some programmes are noticed contineously that they are taking the <b>max. response time</b> (and mostly >90%of time is DB Time ).
how to tune the above situation ??
Thank u.

Siva,
You can start with some thing like:
ST04 -> Detail Analysis -> SQL Request (look at top disk reads and buffer get SQL statements)
For the top SQL statements identified you'd want to look at the explain plan to determine if the SQL statements is:
1) inefficient
2) are your DB stats up to date on the tables (note up to date stats does not always means they are the best)
3) if there are better indexes available, if not would a more suitable index help?
4) if there are many slow disk reads, is there an I/O issue?
etc...
While you're in ST04 make sure your buffers are sized adequately.
Also make sure your Oracle parameters are set according to this OSS note.
Note 830576 - Parameter recommendations for Oracle 10g

Burrito - Design mode could not load

Also in Burrito i get the Warning in Problems View:
Design mode could not load Mate_08_9.swc. It may be incompatible with this SDK, or invalid.
The message appears also for SQLExtension ans ThonderBolt.
Is there a solution available or it is still a bug?
thanks
Frank

Hi,
There is no issue in Design view related to this. mate_08_9.swc is not compatable with the sdk you are using. So no change planned from FB side for this. Please contact the swc owners to resolve the issue.
Theoritically this should not affect the DV fucntionalities (which dont depend on this swc)
Very soon we will be providing an applicaiton (Not part of FB) which can be used by the swc owners to anlyse the DV reported issues of their swc.
thanks,
Rani

ETLs processes - Full vs Incremental loads

Hi,
I am working with a customer who already have implemented Financials Anlysis in the past, but now the requirement is to add Procurement and Supply Chain Analysis. Could anybody tell me how to the extraction of these new subject areas? could I create separate Executions Plans in DAC for each subject area or I need to create one ETL which contains the 3 areas?
Please help me! I also need to understand which is the difference between full load and incremental load, how I configure the DAC to execute either full or incremental extraction?
Hope anybody can help me,
Thanks!

In regards to your "multiple execution plan" question: I usually just combine all subject areas into a single execution plan. Especially considering the impact Financial Analytics has on Procurement and Supply Chain subject areas.
The difference between full-load and incremental-load execution plans exists mostly in the source qualifiers date-constraints. Incrmenetal execution plans will have a $$LAST_EXTRACT_DATE comparison against the source system. Full-load execution plans will utilize $$INITIAL_EXTRACT_DATE in the SQL.
A task is executed with a "FULL" load command when the last_refresh_date for that tasks target tables is NULL.
Sorry this post is a little chaotic.
- Austin
Edited by: Austin W on Jan 27, 2010 9:14 AM

Data load - Failure Scenarios

Can anyone please explain in detail on how to handle this DATALOAD issues. I would like to understand for following scenario in BI 7.0 and R/3 4.6c
1) R/3 --> PSA --> DSO --> CUBE
So, there are one infoPackage and 2 DTP's are involved.
Let us take take a scenario, Please explain me in detail (Steps), on how to fix the LOAD, if the LOAD failed in R/3 --> PSA or PSA --> DSO or DSO --> CUBE.
I would appreciate your help in advance and points will rewards, of course.
BI Developer

Hi.......
1) Generally load fails in R/3 --> PSA due to RFC connection issue......You can check the RFC connection SM59.....
If it fails........you can make the status red.....and delete the failed request from PSA........again load it........
2) Load from PSA to DSO may fail due to many reasons....
a) Lock issue...>> in this case you can check the lock in SM12........wait for the lock get released...........then make the QM status red......delete the request from the target..again repeat the load............
Or may be due to locked by change run........in this case also after the completion of ACR....you have to repeat the load..
b) load failed because last delta failed.........In this case first you have to rectify the last delta.........then repeat this load....
3) DSO --> CUBE.........a)here also the load may fail due to lock issue...in this case also you have to delete the request from the target.after making the QM status red........then lock get released you have to repeat the load.......
b)while loading data from DSO to infocube , the dtp run failed due to short dump.The error anlysis gives description as DBIF_RSQL_SQL_ERROR,
This error is usually seen when the table behind ODS is getting updated from more than one source system simultaneously. Here the data packets from more than one request contain one or more common records. This gives rise to deadlock while updating inserting records into the ODS table and subsequently a short dump is encountered leading to the failure of one request. The solution is to cancel the loads and run them serially. A possible long term solution is to load the data up to the PSA in parallel and then load the ODS table from the PSA in serial. (Here change the InfoPackage to option PSA only and tick Update subsequent data targets).
Solution
It may be possible that the job is set up in such a way that the activation of data in the ODS takes place only after data is received from all four regions. Thus, if the failing request is deleted the correct requests will also be deleted. Hence it is required to change the status of the failed job from red/yellow to green, activate the ODS data and then re-start the load from the (failing) source after correction of any possible errors.
c) while loading the active data that is in the first ODS into a cube - it fails with the following error.
err #1 )Data Package 1 : arrived in BW ; Processing : Error records written to application log
err #2 ) Fiscal year variant C1 not expected
Sol : 'GO to SPRO, SAP Customizing guide
Open the tree:
SAP Netweaver
SAP Business Information Warehouse
Maintain FIscal Year Variant
Hope this helps you.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Sep 24, 2008 8:47 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:53 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:54 PM

Open project cancelled or unable to load database...

I have been running version 9 sucessfully and moving projects around with no errors. Today, I cannot load any of my projects.
I have been through the threads and deleted the .cpj, moved the project to the root of my hard drive, etc.
Something else is going on.
I did see some information on files being blocked by the virus scanner. I'll pursue that with my help desk.
Any other ideas would be appreciated.
Thanks!

The only file that is MS Access based is the CPD file and it does not matter which version of Access you have on your machine, indeed you don't have to have Access installed.
If you have the same problems with the supplied sample projects, then maybe something has gone wrong with your installation of RoboHelp. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

OBIEE Pre-Builts Loading one year at a time

Hi,
We are in a situation where we need to load one year at a time into the BAW (warehouse). I have seen this done before where the initial load was a full load and only went forward one year. Each subsequent load was for a complete year until we were current. After that, it was simply incremental loads with the standard prune days of 30.
Does anyone have any detail as to how to do this?
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Adobe cloud tries to load addon which I have deleted in Extension manager

when Adobe Cloud starts it tries to load an application (Edge FX lite) that I have deleted in Adobe Extension Manager cc. I get the error message ' unable to install the addon EdgeFX lite error 603. How do I stop this?
Also in Adobe Exchange in 'My Stuff' there are showing addons which I have removed in Adobe extension Manager cc which I would like to be removed from this listing as I will never use them, but if I right click to uninstall I fail to get rid of them.

Apologies, without making the assumption that you are signed in
1) Go to https://creative.adobe.com/addons/
2) In the top right hand corner select sign in and enter your Adobe ID and password
3) Once logged in, on the center of the screen at the left hand side, select the link 'All your purchases and shared items'
4) You will then be taken to a page that is the equivalent of your My Stuff panel.
5) You can then install individual add-ons/extensions.
Kind regards,
Lea

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Load Times

I am installing Adobe Creative Cloud enterprise in a virtual lab environment. This lab basically reverts back to a pre-defined state during reboot - all user profiles are deleted. When a user logs in and starts Photoshop for the first time, it takes up to 30 seconds to load. If the user opens photoshop again while still logged in, it opens in about 2 seconds. How can I speed photoshop up so it loads quickly the first time when a user launches it? Are there settings in the user profile that I can copy to other users? Is there something I can disable on the first load? etc. I tried copying some of the profile settings to the default profile, but that only reduces the launch time to about 10 seconds. InDesign is another example. Using Windows 7 x64, 8GB RAM machines. No other special software installed except office 2013. Thanks.

Probably nothing you can do. It's likely not PS itself, its the licensing stuff and the updaters, which naturally will have a hard time in a VM that prevents them from accessing certain things. Or in short: You are forcing them into quirks mode and it may take forever until they have established their port connections after a million failed attempts.
Mylenium

Loading error

Hi,
I'm trying to load data it is given an error,
WRT_8025 Error in BW Target. [Number of fields in Target do not Match
Repository fields = 15 BW fields = 18]
WRITER_1_*_1> Wed Oct 19 15:07:55 2007
WRITER_1_*_1> WRT_8025 Error in BW Target. [===> Compare Targets for InfoSource Failed.
SAP system exception raised.
key = RFC_ERROR_SYSTEM_FAILURE
message = See RFC trace file or SAP system log for more details
Please help me to find out the problem.
Thanks,

rob,
could you give the BW version also and what data you are trying to load and where ?
Ideally try replicating the datasource once again... and check your source system connection.
Arun

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Data loading

Requirement is that enhanced the extractor by adding fields mapped the fields in bw in DSO,added in dimension in cube and also mapped in multiprovider ,on multiprovider report is build.
Now for testing need to reflect the data in report.
How can it achieve ,need to load the data from infoobjects DSO to cube is it the right approach.
Please suggest how to achieve it starting from loading infoobject then to DSO and then to cube and finally to reflect the data in report.

Hi there,
I guess you've said it all.
You enhance a datasource with new fields, and you've also added those new fields in the DSO and also mapped from the datasource to the DSO these new fields. You've also add the fields in the cube and mapp the fields from the DSO to the cube. You've also add the fileds in the MultiProvider and have identified the fields there. You've also changed the query with the new fields
So for loading the data, you should load the attributes and/or texts for the new InfoObjects first.
After that activate the master data for those new fields.
After that load the data from the datasource to the DSO and activate the DSO
After that load the data from the DSO to the InfoCube and after that you can check the report with the contents of this new data (with the new fields).
Hope this helps,
Regards,
Diogo.

Loading

Hi ,
Need to load 2 newly added field in DSO and then in cube (fields where added in extractor),need to run just transactional load or need to load master data first

Hi
Have you also added those new fields to DSO and cubes??
if no please add them there and update respective transformations as well.
if yes its always good idea to load master data first and then transaction data.
specially before loading to cube or to DSO with SIds activated.
Hope this helps
Regards
Sudeep

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

Load anlysis

Similar Messages

Maybe you are looking for