Load automatically in a Cube (Bi 7.0)

Hi,
I have a push mechanisms which put data in a DataSource... how can I load automatically data to the ODS and Infocube which are connected... I mean
DataSource-->ODS-->Cube
I am working in Version BW 7.0
Thanks
FedeX

Hi FedeX,
In addition to process chains, Real-Time Data Acquisition may help you to meet your requirement. I don't have idea on the setting for this as i m not using the NW2004s BI system since 6months.
Please refer these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/c56642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/52/777e403566c65de10000000a155106/frameset.htm
Regards,
BVC

Similar Messages

Automatically trigger the event to load data from Planning cube to Standard Cube

Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps.

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Loading measures to a cube

hi
How to load measures to a cube.
I created a cube, validated and deployed successfully.
I am loading only a single measure from a table, but it does not load anything.
even the keys of the dimensions are not in the database table.
do i need to map on the measure to the proper row in the cube or i also need the keys to be mapped?
regards
Arif
P.S. I am unable to include a screen dump in the forum, how to do it?
Edited by: badwanpk on Nov 4, 2008 2:36 PM

Yes, you need to build a row for insertion to the fact by joining your source tables.
At the moment you are building a Data Mart/Star Schema (fact and dimension tables i.e. a cube), this Star Schema will be used for reporting i.e. no need to go back to the source. Ultimately, this could grow into a Data Warehouse that has dimensions and facts populated from many sources allowing reporting across your whole organisation rather than a single application. The dimensions are likely to contain far more descriptive i.e. text attributes than the source systems and will be used to constrain your reporting queries.
I suggest reading some articles/books by Ralph Kimbal, they should give you a good overview of Data Warehousing and Dimensional modelling.
http://www.kimballgroup.com/html/articles.html
Si

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

How to load data to a cube from multiple infosources ?

Hi friends,
How to load data to a cube from multiple infosources ? could u please answer this question .
thanks in advance......

Hi ,
say for example you need to load data to 1 cube from 3 info sources:
1) You need to create 3 update rules for the Cube.
2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
Regards
satish
Message was edited by:
satish murthy

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Partial data loading from dso to cube

Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .

Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Index.html pages in local sub-directories will not load automatically when sub-directory name entered into address field, followed by a forward-slash

I am in the process of designing a website-on-a-CD. In order to make things easier for my clients, I decided to organize this site into local sub-directories with an index.html page in each one. However, when I try to enter the local sub-directory name, followed by a forward-slash, the index page does not open automatically. Instead, I get a raw directory listing that includes the index.html file, and anything else that is present within it. I would like to know if there is any way to force this page to load automatically within Firefox from a local storage medium as it would load from a web-server.

You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
Where is the main HTML located ?
Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
See:
*http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Error while data loading in real time cube

HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.

While loading transaction data into cube what are the tables generats

Hi,
while loading transaction data into cube what are the tables normally generats.

Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva.

Unable to load master data to cube

Hi,
I have one master data 0PART which is referenced by 0Activity Type master data.
I have added 0PART chara into one infocube. and wrote abap code in update rule as below:
data:    begin of i_acttype occurs 0,
                0PART like /BI0/PACTTYPE-ACTTYPE,
          end of i_acttype.
select ACTTYPE into table i_acttype
        from /bi0/pacttype
    for all entries in DATA_PACKAGE
       where objvers   = 'A' and
             acttype = DATA_PACKAGE-PART.
The reason behind adding this code is,
Cube is populating from ODS and in ODS data comes from R/3 but standard extractor dont populate this field so i am trying to load it from master data.
when i try to load data into info cube it gets stuck in update rule. it reads the data but not transfering it to cube. so i believe that there is some problem in my code. in monitor i can see that it starts processing update for cube and ends immediately without any error message. process status ends but shows request is still running.
can someone correct it for me ?
thanks,
KS

Hi
You are just populating the internal table with the records using the select but no code to write the record to the part field of the cube. Im not very good in ABAP but you can try adding the below code and see if it works or not.
data: begin of i_acttype occurs 0,
0PART like /BI0/PACTTYPE-ACTTYPE,
end of i_acttype.
select ACTTYPE into table i_acttype
from /bi0/pacttype
for all entries in DATA_PACKAGE
where objvers = 'A' and
acttype = DATA_PACKAGE-PART.
loop at data_package where part = i_acttype-0part.
if sy-subrc eq 0.
datapackage-part = i_acttype-0part.
endif.
endloop.
Hope it helps.
Regards
Sadeesh

Hi! I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no. There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks

Hi!
I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
The url is sometingh like this (this is correctly loaded, but it could be longer)

Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
If there are problems then it is possible that an extension is the cause of that.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Load automatically in a Cube (Bi 7.0)

Similar Messages

Maybe you are looking for