Load Balancing on RDS 2012 R2 does not work

Hello,
I'm working on a test deployment with 3 Session Hosts, GW/WA/CB on one server and licensing on another.
GW and CB are also on a Failover cluster so i don't want High Availability now (I want to start with simpler and work out the errors first)
One issue is when I try load balancing option on my Collection's Properties by changing the relative weight of the servers, nothing happens at all. All the sessions are created on a single server (GW/WA/CB) and nothing on the server I want to redirect to.
Any help is appreciated!

Hi,
Thank you for posting in Windows Server Forum.
Please see that you have added following registry key to the connection broker.
HKLM\SYSTEM\CurrentControlSet\Control\TerminalServer\ClusterSettings
DefaultTsvUrl tsv://VMResource.1.Virtualpool1
After this you can use “mstsc /admin” to perform remote desktop.
In addition, we can use DNS RR method to configure Load Balancing. Please check below thread for information.
2012 R2 Load-Balanced RDS farm
https://social.technet.microsoft.com/Forums/en-US/2ec5e96e-7ca6-44b5-85f8-5286c6881dea/2012-r2-loadbalanced-rds-farm?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Similar Messages

HT1212 My phone is disabled. I just loaded IOS 7 and my password does not work.

My phone is disabled. I just loaded IOS 7 and my password does not work.

I do not understand how to remotely wipe the phone using icloud, find my phone or my apple id and password. Kindly explain step by step as I am an older individual and I am confused

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

Guest VM failover cluster on Hyper-V 2012 Cluster does not work across hosts

Hi all,
We are evaluating Hyper-V on Windows Server 2012, and I have bumped in to this problem:
I have a Exchange 2010SP2 DAG installed on 2 vms in our Hyper-V cluster (a DAG forms a failover cluster, but does not use any shared storage). As long as my vms are on the same host, all is good. However, if I live migrate or shutdown-->move-->start one
of the guest nodes on another pysical host, it loses connectivity with the cluster. "regular" network is fine across hosts, and I can ping/browse one guest node from the other. I have tried looking for guidance for Exchange on Hyper-V clusters but have not
been able to find anything.
According to the Exchange documentation this configuration is supported, so I guess I'm asking for any tips and pointers on where to troubleshoot this.
regards,
Trond

Hi All,
so some updates...
We have a ticket logged with Microsoft, more of a check box exercise to reassure the business we're doing the needful. Anyway, they had us....
Apply hotfix http://support.microsoft.com/kb/2789968?wa=wsignin1.0 to both guest DAG nodes, which seems pretty random, but they wanted to update the TCP/IP stack...
There was no change in error, move guest to another Hyper-V node, and the failover cluster, well, fails with the following event ids I the node that fails...
1564 -File share witness resource 'xxxx)' failed to arbitrate for the file share 'xxx'. Please ensure that file share '\xxx' exists and is accessible by the cluster..
1069 - Cluster resource 'File Share Witness (xxxxx)' in clustered service or application 'Cluster Group' failed
1573 - Node xxxx failed to form a cluster. This was because the witness was not accessible. Please ensure that the witness resource is online and available
The other node stays up, and the Exchange DB's mounted on that node stay up, the ones mounted on the way that fails failover to the remaining node...
So we then
Removed 3 x Nic's in one of the 4 x NIC teams, so, leaving a single NIC in the team (no change)
Removed one NIC from the LACP group on each Hyper-V host
Created new Virtual Switch using this simple trunk port NIC on each Hyper-V host
Moved the DAG nodes to this vSwitch
Failover cluster works as expected, guest VM's running on separate Hyper-V hosts, when on this vswitch with single NIC
So Microsoft were keen to close the call, as there scope was, I kid you not, to "consider this issue
resolved once we are able to find the cause of the above mentioned issue", which we have now done, as in, teaming is the cause... argh.
But after talking, they are now escalating internally.
The other thing we are doing, is building Server 2010 Guests, and installing Exchange 2010 SP3, to get a Exchange 2010 DAG running on Server 2010 and see if this has the same issue, as people indicate that this is perhaps not got the same problem.
Cheers
Ben
Name                   : Virtual Machine Network 1
Members                : {Ethernet, Ethernet 9, Ethernet 7, Ethernet 12}
TeamNics               : Virtual Machine Network 1
TeamingMode            : Lacp
LoadBalancingAlgorithm : HyperVPort
Status                 : Up
Name                   : Parent Partition
Members                : {Ethernet 8, Ethernet 6}
TeamNics               : Parent Partition
TeamingMode            : SwitchIndependent
LoadBalancingAlgorithm : TransportPorts
Status                 : Up
Name                   : Heartbeat
Members                : {Ethernet 3, Ethernet 11}
TeamNics               : Heartbeat
TeamingMode            : SwitchIndependent
LoadBalancingAlgorithm : TransportPorts
Status                 : Up
Name                   : Virtual Machine Network 2
Members                : {Ethernet 5, Ethernet 10, Ethernet 4}
TeamNics               : Virtual Machine Network 2
TeamingMode            : Lacp
LoadBalancingAlgorithm : HyperVPort
Status                 : Up
A Cloud Mechanic.

Just downloaded latest version--keeps trying to load last session-start new session does not work. Help?

Here is the problem details. Am I going to have to uninstall?
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 1.9.2.4095
Application Timestamp: 4d852c95
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Fault Module Timestamp: 4cb73436
Exception Code: c0000005
Exception Offset: 000469ce
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 1a9e
Additional Information 2: ca321f9d3309051b0d4a7a671dc893c6
Additional Information 3: 4a7f
Additional Information 4: 71f11eaed1268bd63f4a971e81cd5649

I am guessing this is malware or adware of some sort. Ty scanning with multiple and up-to-date tools
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
* [http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]
* [http://www.kaspersky.com/security-scan Kaspersky Free security scan]
You need to use multiple and up-to-date tools as they will not all pick up the same things.
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good FREE permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Could not load MMXCore Routines module because it does not work with Photoshop CS6?

What is this - should I be concerned?
Thanks,
DrDisk

Hi Joel,
Check out this FAQ: http://forums.adobe.com/message/4221311#4221311
regards,
steve

Ok, the project panel does not work anymore!!!!

I'm using flash cs5.5 and today I opened my project to start working... just to find out that the project panel does not work. When I click the tab to expand it, flash hangs for a minute and then it works, but the panel is blank, empty. The odd thing, I saved the project as CS5 version to open it in the CS5 Flash, but CS5 it's broken too.
I tried opening Flash (both versions) without loading any project and the tab does not work either.
Anyone has an idea on this?
Thanks!

Ok, I think I get what the problem is... When I make right click over the PROJECT panel, it displays the flash player popup menu, so I guess it's made with flash/air. What I think is that my flash player is somehow screwed, so it don't displays the project panel contents and won't let me export my FLA files correctly. And it happens in both CS5 and CS5.5 versions.
Maybe a clean reinstall of both should solve the issue... I reinstalled the CS5.5 two times, and didn't solve the problem, neither uninstalling/installing the flash player plugin for all browsers.
kglad:
I only see the tab, when I try to display the panel contents, FLASH hangs like for a minute, then it responds but the panel is blank... no menus, options, nothing.

Laoding files into layers from bridge does not work

Using photoshop ver 14.2.1x64 and bridge on a PC.. While in Bridge, I selected 2 pictures, selected tools, photoshop and load files into layers. It does not work. any ideas of how to make it work

You get 5 gold stars, I also have cc2014 and it works, thank you.
On Wed, Oct 29, 2014 at 4:56 PM, Warunicorn <[email protected]>

MacBook Pro does not work

I am very frustrated. To make a long story short, my dog knocked down my macbook and it got destroyed. I purchased all the parts on Ebay . i bought all the parts on ebay. Here is the issue. The parts i purchased from ebay are brand new and work. the last issue that i had was with the keyboard. so i bought a new keyboard replacement from factory brand new.After installing the new keyboard, i do not know what happened to the laptop but it does not work properly anymore.
Here are the issues:
1. The computer becomes overheated very fast
2. the computer takes a long time to load when starting
3. the keyboard does not work
Here is another issue: the airport card is brand new yet the system does not pick it up.
The computer worked perfectly until i replaced the old keyboard with the new one.
i tried to do a diagnostic and it does not work. the computer freezes during the diagnostic. it does not finish and the computer overheats. feel so frustrated. i was so close to finally fixing my laptop. i am lost.
macbook pro unibody mid 09 a1286. not sure about the operating system.

Do you have a wired keyboard?
"Yes, the keyboard works. It powers the computer, however, the keyboard keys don't work."
So the power button works but the keyboard doesn't.
Pull the connector to the keyboard and start the computer using the power pads as below:
http://www.insidemylaptop.com/turn-on-macbook-pro-laptop-without-power-button-lo cating-power-on-pads/
Be very careful doing this. Carefully identify the power pads and only touch them.
"macbook pro unibody mid 09"
size?

Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

Hello,
I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
I've tried with several commands (like "certutil -f -v -addstore root filename.p7b" or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
Many thanks in advance for any help!
Max

Hi,
As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
Get certmgr.exe tool available with MS .net framework tools.
Try adding this to your batch file
certmgr -add -all -c "File.p7b" -s -r localMachine Root
where File.p7b is the file containing certificates. You can replace the name with your file name.
Check if its working.
Thanks,
Reyaz

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

Load Balancing on RDS 2012 R2 does not work

Similar Messages

Maybe you are looking for