Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

Similar Messages

Problem loading data from the PSA to the InfoCube

Hello experts.
I'm having a problem loading data from the PSA to the InfoCube.
I'm using a DTP for this process but is happening the following error:
"Diagnosis
      An error occurred while executing the transformation rule:
      The exact error message is:
      Overflow converting from''
      The error was triggered at the point in the Following Program:
      GP4KMDU7EAUOSBIZVE233WNLPIG 718
System Response
      Processing the record date has Been terminated.
Procedure
      The Following is additional information included in the higher-level
     node of the monitor:
     Transformation ID
     Data record number of the source record
     Number and the name of the rule Which produced the error
Procedure for System Administration
Have already created new DTP's deactivate and reactivate the InfoCube, the transformation, but solves nothing.
Does anyone have any idea what to do?
Thank you.

HI,
Is it a flat file load or loading frm any data source?
try to execute the program GP4KMDU7EAUOSBIZVE233WNLPIG 718 in Se38 and check if its active and no syntax errors are there.
Check the mapping of the fileds in transformations weather
some data fileds are mapped to decimal or char 32 filed is mapped to Raw 16
or calweek, calmonth mapped to calday etc.
Check in St22 if there any short dumps ..
Regards
KP

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

Load data from XML files into BI

Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
Santosh

Hi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM

Dump while loading data from 1 cube to other cube

Hi,
We created a direct mapping between 2 cubes ( no start/end routines, formula exist in the mapping). Strange part is while I am loading data from one cube to other cube all data packages executing successfully only last data package giving dump with ITAB_DUPLICATE_KEY. This is in our QA system. But it is working/loading correctly in DEV.
Please help. Thanks in advance for your support.
Regards,
Sai

Hi Sai,
Please refer to below blog for ITAB Duplicate Key error.
ITAB_DUPLICATE_KEY Dump error during Master Data loading
This can occur when a BW client has many different source systems, unused objects still remains, creating a duplicate entry in RSISOSMAP table.
Regards
Shabnam

Unable to consolidate data from two DSOs into an InfoCube for reporting.

Hello Experts
I am working on BW 7.0 to create BEx Report as below:
This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
Below are the screenshots of these 2 DSOs:
I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
All the testing is done using only one Sales Document No (VBELN).
First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
ZCOPA_01 ZSD_DS18
0REFER_DOC <-> 0BILL_NUM
0REFER_ITM <-> 0BILL_ITEM
0ME_ORDER <-> 0DOC_NUMBER
0ME_ITEM <-> 0S_ORD_ITEM
51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
Thank you very much in advance and your help is appreciated.
Thanks,
Chandu

in your (current) InfoCube setup, you could work with "constant selection" on the key figures
for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

Loading data from flat file into 0EMPLOYEE

Dear,
I want to see the 'monthly change of numbers of employees' of my company in a BW report.
i want to do this by loading data from a dummy flat file into 0EMPLOYEE and afterwards into cube 0PAPA_C02.
i've searched the whole 'help and service sap' websites but nowhere, i could find a usefull user guide.
Could you explain me how this job needs to be done, are there certain steps that need to be taken?
here are a few of my questions:
1: what fields and data do i have to fill in my flat file?
2: how does the time-dependency of master data of employee work?
3: why do you only have to map 0calday and 0employee from infosource 0HR_PA_PA_1 to the corresponding fields of cube 0PAPA_C02?
4: how is the key figure 0HDCNT_VC filled automathically?
(the activation of cube 0PAPA_C02 and its flow is already done.)
or maybe you know a user guide which explains the whole picture and could you send me its link?
thanks a lot in advance,
Julie de Meyer

Hi,
Employee is master data : You need to extarct data every month.Once the extraction is done , you need rto activate to see the results. Otherwise it will display old result.
You can extract data for 0HR_PA_0 and 0HR_PA_1 cubes also. After that you can do the reporting based on this.
You can try some sap standard BI reports .
Headcount is calculated based on employement percentage which is maintained in infotype 0007 (Planned Working Time). If it is 100 then it is considerd as headcount 1.
you can check .
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Regards
Nilesh

Loading data from .csv file into Oracle Table

Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regards

You can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM

Error while loading data from R/3 into DSO

Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
    Updating for the information structure is still activated in client 150
    (and possibly also in other clients).
System Response
    o   It is not possible to upload data in the initial mode.
    o   Generation of the delta update was terminated.
Procedure
    1. Switch off updating in all system clients.
    2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.

Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
      Lock users
      Stop the update in the system .
      Load init Package
      Start the update
      Unlock users.
      Load delta package.
Hope it helps.
Regards
Mr Kapadia

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Loading Data from an Infoset to an Infocube

I have been searching on this forum but still confuse because of the different answers I have found,
I want to know if it is posible to create a DTP and transformations from an Infoset to an Infocube, I know the Infoset itself does not
contain any data, it is just a join between differents infoproviders, but I just want to know if is posible.
Edited by: Wasipati on Jan 25, 2011 9:54 PM

Hi,
Yes, an Infoset can be a used as the source of a transformation.
Source can be :- Infoset, an InfoObject, a DataStore, an InfoCube, a DataSource and an Infosource.
Target can be :- an InfoObject, a DataStore, an InfoCube , an Open Hub and an infosource.
Since infoset does not store any data physically, it will fetch the data from the underlying info providers(like DSO) through Joins.
Hope it helps!!!
Regards
Lekshmi

How to load data from XML DOM into tables using Business Components


Hi,


I need to upload XML file (it's not a problem) an load data (DOM tree) from this file into relationan tables. This filelooks like this:


<Departments>
 <Department>
 <DepartmentName>OPERATIONS</DepartmentName>
 <Localization>BOSTON</Localization>
 <Employees>
 <Employee>
 <LastName>TURNER</LastName>
 <Job>SALESMAN</Job>
 <Manager>7698</Manager>
 <HireDate>1981-09-08</HireDate>
 <Salary>1500</Salary>
 <Commerce>0</Commerce>
 </Employee>
 </Employees>
 </Department>
</Departments>


Is there any Business Components support to obtain this ? What about primary and foreign keys values (there is no in XML file). How to place this XML data in appropriate tables ?


Kuba


Pl post details of exact OS and database versions, along with a sample of the XML file and description of the tables. What have you tried so far ?
http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_control_file.htm#i1005614
HTH
Srini

Error loading data from bw table into BW system

Dear all,
I have created and fill z tables in bw system, and try to load data into same bw system.
What i am facing is error message saying "Error in module RSQL of the database".
and when i check st22 for dump analysis, it says:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
how come?
Thanks

Can you try again by activating the generic datasource in RSO2. It should work.
And also make sure the tables are active.
Ravi

Loading data from text file into ListBox

I have data in a text file that I want to load into a
listbox... I have fully mastered handling strings and arrays so I'm
going to need some help...
I was wondering how do I get flash to load a text file that
contains the data below.. and display it line for line like I want
it to list down the component
"Launch;7.1.7.6"
"Engine;7.1.7.6"
"OSX;7.0.0.2" (or something close to that)
and I was wondering how do i just get it to take it fromt he
file.. line for line from where it says exeversion in the file and
list it in the listbox...
I'm really thankful to anybody that helps.
Data in text file:
quote:
exeversion=Launch;7.1.7.6;
exeversion=Engine;7.1.7.6;
exeversion=LinuxX86;7.0.0.2;
exeversion=LinuxPPC;7.0.0.2;
exeversion=LinuxMIPS;7.0.0.2;
exeversion=OSX;7.0.0.2;
exeversion=Config;7.1.7.6;
exeversion=UI;7.1.7.7;
exeversion=JAVA;7.0.4.5;

nobody cna help me? i really need to know or have a tutorial
or something so i can learn from it... i really appreciate anyone
who helps

Load data from FTP server into Oracle

I have a zipped file in a FTP server. I need to unzip the file and sql load it into an Oracle table.
Does Oracle has any utilities with which I can direct do "get" from the FTP server?
Does Oracle has any zip/unzip features?
I am using 10g.

user6794035 wrote:
I have a zipped file in a FTP server. I need to unzip the file and sql load it into an Oracle table.
Does Oracle has any utilities with which I can direct do "get" from the FTP server?
Does Oracle has any zip/unzip features?
I am using 10g.Oracle does not support thes features directly. You'll have to write an OS script to performthe tasks and insert the data.
Dependending on your output format you can use UTL_FILE, SQL*LOADER, or external tables to load the data.

Load data from an infocube into other infocube

Similar Messages

Maybe you are looking for