Load Data to supporting details Hyperion Planning

Hi All,
I want to load data to supporting details in Hyperion Planning, does anyone know how to do it?
Because as i know, supporting details only available in Planning's repository.
I really appreciate if anyone can help me.
I am using Hyperion 11 and ODI.
Thx

Hi,
You could look at using LCM, you will need to export supporting details to understand the format of the XML.
You can also use ODI with LCM, I wrote a blog about using LCM with ODI which should give you some ideas, have a read here
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Mozila FireFox is supported for Hyperion planning verion 4.0 ?

Hi All,
As i know IE6 browser is supported for Hyperion planning 4 then how about other browsers like Firefox & Chrome ? those browsers will work or not ?
If not, Why ?
I am able to login into my Hyperion web page through Firefox but m getting Error like "NS_ERROR_NOT_AVAILABLE"..and also not able to see the menu's like File,help,tools etc.
Please suggest to overcome this issue..
Thanks in advance.
Regards,
Prabhas

Hi Prabha,
Can you tell which version of Planning you are running on?
Go to the below link, download the support matrix for the version you are on and then verify support for Client/Server platforms.
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

Load data from infocube to DP planning area

Hi All,
I have loaded the data from info cube to DP planning area keyfigures with the transaction /SAPAPO/TSCUBE.
the data copy was successful and there were no error messages. However, the keyfigure values in planning book are shown exactly as double the values of infocube key figures for all the periods.
I repeatedly loaded data several times and the behaviour was same.
We didn't implement any BADI in standrad /SAPAPO/TSCUBE program.
Could any one please give some hints what would be the reasons for this problem.
Thanks
Krish

I am not sure on how you check the Live Cache data for DP but based on your testing I can say that the old data is not overwritten by the new data in the Live cache. I cannot say the root cause for this however I can suggest you the remedy. To avoid this issue, you zero out the values of the key figure before loading from the Cube.
For this you have to run a macro which copies zero for the entire horizon and then load the cube. First test this in test system, if it works (it should work), then to make it simple create a batch job with two steps, first step would run this macro and the second step will load the data from cube. you can run this job whenever you want to load the data

Loading Metadata from ODI to Hyperion Planning Custom Dimension

Customer want to load a metadata from ODI to Hyperion planning customer dimension using flat files(.txt files).
Is it possible to load the metadata into custom dimension? If this is possible, do we need any other KM for planning except RKM Hyperion Planning?
Because when i try to map the dimension from source to taget the connection is blanck. Getting "Used by target columns none".
Please refer the image
http://1.bp.blogspot.com/_Z0lKn46L41I/TJuZcsQxIjI/AAAAAAAAA90/TTv79fbQ9ks/s1600/ODIIssue.JPG
Thanks
Vikram

Yes you can load to custom dimensions just like the other dimensions, the custom dimensions should be reversed into the model.
You need to use the IKM SQL to Hyperion Planning, make sure you set the staging area different than the target.
If you want to see how to load metadata to planning, have a read of :- http://john-goodwin.blogspot.com/2008/10/odi-series-part-5-sql-to-planning.html
Cheers
John
http://john-goodwin.blogspot.com/

Mostly what are issues we get for production support in hyperion planning project ?

mostly what are issues we get for production support in hyperion essbase project ?

When is the interview
Cheers
John

Does ODI Load Hyperion Planning Supporting Detail?

Does the Hyperion Planning KM allow for loading supporting detail to planning?

Hi,
None of the Planning KMs currently allow loading of supporting detail.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load data to Hyperion planning application using odi

Hi All,
When I try to load data into planning using odi, the odi process completes successfully with the following status in the operator ReportStatistics as shown below but the data doesn't seem to appear in the planning data form or essbase
can anyone please help
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 2, in <module>
Planning Writer Load Summary:
     Number of rows successfully processed: 20
     Number of rows rejected: 0
source is oracle database
target account dimension
LKM SQL TO SQL
IKM SQL TO HYPERION PLANNING is used
In Target the following columns were mapped
Account(load dimension)
Data load cube name
driverdimensionmetadata
Point of view
LOG FILE
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Oracle Data Integrator Adapter for Hyperion Planning
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Connecting to planning application [OPAPP] on [mcg-b055]:[11333] using username [admin].
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: Successfully connected to the planning application.
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: The load options for the planning load are
     Dimension Name: Account Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : false
2012-08-27 09:46:43,339 INFO [SimpleAsyncTaskExecutor-3]: Begining the load process.
2012-08-27 09:46:43,355 DEBUG [SimpleAsyncTaskExecutor-3]: Number of columns in the source result set does not match the number of planning target columns.
2012-08-27 09:46:43,371 INFO [SimpleAsyncTaskExecutor-3]: Load type is [Load dimension member].
2012-08-27 09:46:43,996 INFO [SimpleAsyncTaskExecutor-3]: Load process completed.

Do any members exist in the account dimension before the load? if not can you try adding one member manually then trying the load again.
Cheers
John
http://john-goodwin.blogspot.com/

Loading HFM data to Hyperion Planning using FDM

Hi All
Has anyone ever used HFM as a data source for FDM?
Someone has asked me for the best way to get data from HFM into Hyperion Planning and whether FDM can manage that. I know there is a generic Pull adapter and the ERPi but I'm not sure whether either of those will do the job.
At the moment I am assuming that they will need to extract data from HFM to flat file and then import to FDM as a 2 stage process?
Any thoughts?
Thanks
Stuart

Hi Tony
Apologies for the delay (my email spammed the notification that you had replied, helpful!!). When you say that you have done it but discourage accessing the tables directly how did you achieve this? Were you just careful which data intersections your selected from the tables (e.g. always base level data so it is stored not calculated)?
I have used the HFM relational tables a couple of times to make use of the metadata that they contain but not tried to get data before.
Regards
Stuart

Is there a way to upload Supporting Details into a cell in Planning?

Is there a way to upload Supporting Details in a cell in Planning from a couple of rows of data in Excel ?
We have a lot of supporting details in excel rows that we want to load into one cell in Planning Web form 11.1.1.3.
I know how to extract Supporting Details from Planning's RDBMS repository, but has anyone successfully reverse that process and update Planning's Supporting Detail Tables with data?

You can reverse the process of how you exported the information using SQL to import the new information.
I think you will need to restart the planning service for it to take effect, best to test it on a dev environment until you are comfortable with the SQL
Or you can use LCM, use LCM to export supporting details, then look at the xml document for the format.
You can then create your own XML document and use LCM to import it in.
I would probably try the LCM route first.
Cheers
John
http://john-goodwin.blogspot.com/

Error when loading data into Planning

Unable to load data into planning 11.1.2.3.200 using ODI 11.1.1.7
Please find the errors from below logs:
INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxxxxx] on [xxxxxxxxxxx]:[xxxx] using username [admin].
INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Account Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A603010, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -100, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A601060, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -250, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
log.err
Account,Data Load Cube Name,Budget,Point-of-View,Error_Reason
A603010,xxxxx,-100,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
A601060,xxxxx,-250,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
FDMEE log:
ERROR [AIF]: Error: No records exist for Period 'Pd 2 - 2014-08-01'
ERROR [AIF]: Error: No records exist for Period 'Pd 3 - 2014-09-01'
FDMEE Logging Level is set to 5

Are you sure that you haven't got Planning 11.1.2.3.500 in your environment? This sounds spookily similar to the issue described in note 1678759.1 which was seen after applying Planning 11.1.2.3.500. If it's definitely Planning 11.1.2.3.500 is there any chance that someone has applied ODI patch 18687916 to the ODI home (C:\Oracle\Middleware\odi)?
If you /*are*/ running Planning 11.1.2.3.500 then you might need to apply patch 18687916 to C:\Oracle\Middleware\odi - you might need note 1683307.1 to take some of the pain out of applying this patch though.
Given the error that you're seeing though there's a mismatch in versions of JAR files between ODI and the Planning server somewhere.
Regards
Craig

Unable to load metada into Hyperion Planning using ODI

HI All,
I am using ODI 11g and trying to load the metadata for Hyperion Planning application 11.1.2.1. But I couldnt load all the Product members in Product Dimension.
Could able to load few members but was able to run the interface successfully but thrown error while loading few members(Most of the members are shared members, verified that base members existed). Please find the below error log.
2011-11-17 06:18:06,534 INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
2011-11-17 06:18:06,550 INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxx] on [xxxx]:[11333] using username [xxxx].
2011-11-17 06:18:06,675 INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
2011-11-17 06:18:06,706 INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Product Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
2011-11-17 06:18:06,768 INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
2011-11-17 06:18:06,878 DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
2011-11-17 06:18:07,440 INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
2011-11-17 06:18:07,487 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D090, Mobile Mice Cordless_Prod type, D090-Flores DJ, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,503 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D091, Mobile Mice Cordless_Prod type, D091-Fiji BT, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,518 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D093, Mobile Mice Cordless_Prod type, D093-New York, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,550 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D060, Mobile Mice Cordless_Prod type, D060-Corbusier Vista, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,565 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D064, Mobile Mice Cordless_Prod type, D064-Sardinia Laser, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,581 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D065, Mobile Mice Cordless_Prod type, D065-Ibiza Optical, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
Regards,
SP

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load Dimension into Hyperion planning using ODI ?

Hi All
We are trying to load Dimension into hyperion planning Ver. 11.1.2 using ODI. We have created the interface and mapped the source csv file to target planmning application using ODI KM.
LKM file to SQL
IKM SQL to Planning
We get success in ODI's Operator but the Dimension is not updated nor new data is insreted.
We get this message in Error file:-
+
Retail Format,Parent,Alias: Default,Data Storage,Two Pass Calculation,Smart List,Data Type,Plan Type (APlan),Error_Reason
ABC,Total Format,,StoreData,,,,Aplan,Cannot load dimension member, error message is: java.lang.RuntimeException: Fetch of saved member "ABC" failed.
+
We get this message in log files:-
+
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Connecting to planning application [******] on [********]:[11333] using username [admin].
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Retail Format Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : true
2010-07-22 07:04:06,612 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-07-22 07:04:06,612 DEBUG [DwgCmdExecutionThread]: Number of columns in the source result set does not match the number of planning target columns.
2010-07-22 07:04:06,659 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-07-22 07:04:06,675 ERROR [DwgCmdExecutionThread]: Record [[ABC, Total Format, null, null, StoreData, null, null, null, null, null, null, null, null, null, Aplan, null, null, null]] was rejected by the Planning Server.
2010-07-22 07:04:06,675 INFO [DwgCmdExecutionThread]: Planing cube refresh operation initiated.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Planning cube refresh operation completed successfully.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Load process completed.
+
Please help out .....

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Planning Application - Supporting Details

Hi,
We deleted around 4000 members from our planning application and later realised that the few members have budget values tagged to them and also supporting details are included for few of the members. Now we would like to bring back those members to our application. Could you please suggest the best method to bring back those members and the associated supporting details. We donot want to restore the entire the entire application. Is there a way to restore only that particular dimension and its members and the supporting details associated with them. If yes, could anyone of you let me know the process. Our relational DB is SQL 2005.
Request your help for the closure
Thanks,

Assuming you have a backup of your SQL database somewhere (this would be the Planning repository), the following code will extract Supporting Detail:
Supporting Detail
SELECT
     "Plan Type" = P.TYPE_NAME,
     "Scenario" = O1.OBJECT_NAME,
     "Account" = O2.OBJECT_NAME,
     "Entity" = O3.OBJECT_NAME,
     "Month" = O4.OBJECT_NAME,
     "Version" = O5.OBJECT_NAME,
     "Year" = O6.OBJECT_NAME,
     "Activities" = O7.OBJECT_NAME,
     "Employee" = O8.OBJECT_NAME,
     "Value" = I.VALUE,
     "Position" = I.POSITION,
     "Generation" = I.GENERATION,
     "Operator" = I.OPERATOR,
     "SD" = I.LABEL
FROM HSP_COLUMN_DETAIL D
     INNER JOIN HSP_PLAN_TYPE P
          ON D.PLAN_TYPE = P.PLAN_TYPE
     INNER JOIN HSP_COLUMN_DETAIL_ITEM I
          ON D.DETAIL_ID = I.DETAIL_ID
     INNER JOIN HSP_OBJECT O1
          ON D.DIM1 = O1.OBJECT_ID
     INNER JOIN HSP_OBJECT O2
          ON D.DIM2 = O2.OBJECT_ID
     INNER JOIN HSP_OBJECT O3
          ON D.DIM3 = O3.OBJECT_ID
     INNER JOIN HSP_OBJECT O4
          ON D.DIM4 = O4.OBJECT_ID
     INNER JOIN HSP_OBJECT O5
          ON D.DIM5 = O5.OBJECT_ID
     INNER JOIN HSP_OBJECT O6
          ON D.DIM6 = O6.OBJECT_ID
     LEFT OUTER JOIN HSP_OBJECT O7
          ON D.DIM7 = O7.OBJECT_ID
     LEFT OUTER JOIN HSP_OBJECT O8
          ON D.DIM8 = O8.OBJECT_IDYou'll want to modify it a bit to get it to work with your dimensions -- this is from an old project of mine.
I have never tried to write Supporting Detail back in -- I know it has been done, just not by me. I would tread very carefully and only do it on a test database and be really, really, really sure you've got everything working just so. You could easily blow up your data.
Another approach might be to restore that Planning app backup (making sure you made a backup of the current app), and then use LCM to export out Supporting detail, and then suck it back into the app that no longer has it.
^^^I like that idea a lot more even if it is a bit more tedious.
With either approach, you are going to have to sync the Essbase data to the SD data -- hopefully you have a good Essbase backup as well.
Regards,
Cameron Lackpour

Supporting Detail in Data Input Form

Hello,
I would like to ask except HSP_Object, hsp_column_detail and hsp_column_detail_item these 3 tables store data of Supporting detail, is there any other table store it? Because I would like to know which data input form contain supporting detail. I can't find it in these 3 tables.
Thanks

Hi,
Yes it is the tables :-
hsp_column_detail
hsp_column_detail_item item
hsp_object
that contain the information, have a look at the following post it should contain all the information you require :- Re: Recover Supporting Detail notes in Planning
Cheers
John
http://john-goodwin.blogspot.com/

Supporting Details remove data

Hi Gurus,
I need to delete dollar amounts from supporting details in planning data form. There are a lot of supporting details, so I was wondering if there is a way to delete/remove them in an automated way.
Any input would be greatly appreciated.
Thank you

John,
I tried to delete the supporting details by going to the DELETE CELL option, and what happened is that it deleted the description as well. I wanted to delete only the amount in the cell without deleting the description. For example if the supporting details is
TRAVEL EXPENSE 3000
Tolls 40
I would like to delete only 3000 and 40 and would like to have the travel expense and tolls as they are so that we can use it again.
How would i do that.
Thanks

Load Data to supporting details Hyperion Planning

Similar Messages

Maybe you are looking for