Load error 17: what does it mean, and can I save my VI?

I can't load a VI anymore after LabVIEW crashed on me. It just gives me the following error message:
"Resource not found.
An error occured loading VI 'xx.vi'.
LabVIEW load error code 17: Could not load VI's link information."
Is there any way to salvage this apparently damaged VI, or do I have to rewrite all the code?
Regards,
KJB

Thanks for your answer,
None of the obvious things work, including mass-compile and what you suggest. What I was after was if NI has some tool that can try to repair broken VIs, but that apparently isn't the case.
Regards,
KJB

Similar Messages

  • My canon MX700 screen says "error 5200" What does that mean and how do I fix it?

    My Canon MX700 printer screen says "error 5200", what does taht mean and how do I fix it?

    Hello ellenmarcris,
    To try and resolve the 5200 error on your PIXMA MX700, please turn off printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on.  If the same error occurs, the printer will require servicing to resolve the issue.  Please click on the Contact Us link below to obtain your servicing options,
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Music I purchased on I Tunes is not available when I open ITunes in I Movie.  I Movie says those files are "protected" and not accessible.  What does that mean and can I change them to "unprotected" so I can use them in IMovie?

    Most of the music that I purchased on I Tunes I bought and downloaded on my old I Mac which I replaced with this I Mac about 9 months ago.  When I"m using I Movie on this I Mac and try to open I Tunes tab in I Movie, most of the files are not accessible because I Movie says those fields are protected. What does that mean and can I change those files to unprotected so they show up in my music in IMovie?
    This I Mac is OS X version 10.9.5 Maverick, 2.7GHz Intel Core 15 processor, 8GB 1600MHz DDR3 memory.

    Your older iTunes music purchases included DRM software to prevent sharing.
    iTunes Store: iTunes Plus Frequently Asked Questions (FAQ) - Apple Support
    For some money you can get it removed and get a better quality file to boot.

  • Thunderbird 24.5.0 blue belt on imap inbox archives folder and one subfolder. What does this mean and can it be changed?

    Thunderbird 24.5.0 has a blue belt on imap, inbox, archives folder and one of 4 subfolders. What does this mean and can it be changed?

    I see these on my Windows machine but not here in Linux, so I guess it's connected with the icon set available in your OS GUI.
    Changing the theme may provide the result you want.Given that icons are OS and theme specific, it's hard to find definitive descriptions of their meanings. :-(
    This [http://kb.mozillazine.org/Icons_-_Thunderbird_2 old article] is silent on this topic, whilst indicating how two major platforms are quite different in their appearance.

  • ISDN Gateway error message- What does it mean and what could be causing it?

    Hi Folks,
    I have a customer that is getting the following errors in the logs of his Cisco/ Codian ISDN Gateway: Any ideas of what they mean and what could be causing them?
    I know Q931 is affiliated with Call Setup but not sure why an error would occur.  Any help that can be provided is much appreciated, thanks.
    Warning
    parse_q931_header: invalid protocol discrimator
    207
    09:45:50.968 
    ISDN
    Warning
    parse_q931_header: invalid protocol discrimator
    208
    09:45:50.975 
    ISDN
    Warning
    parse_q931_header: invalid protocol discrimator
    209
    09:45:51.120 
    ISDN
    Warning
    parse_q931_header: invalid protocol discrimator
    210
    09:45:51.128 
    ISDN
    Warning
    parse_q931_header: invalid protocol discrimator

    I think I narrowed this down to having a network volume mounted with a  share name of "Users".  The strange thing is even you if unmount the  volume you will still have problems.  However, if you avoid mounting the  volume entirely (from boot) it will be OK.
    The  solution, it appears, is to rename the sharepoint to something other  than "Users".  This worked for us.  I'm not sure if it matters whether  the server is Windows or Mac OS.  In our case the sharepoint was an AFP  volume on Mac OS.
    We had other errors related to Bridge  such as "unable to create folder" and the path in the message appeared  to be /Users/currentUser/.....  which made no sense at all.  However, if  Bridge was internally trying to use /Volumes/Users (the mounted  sharepoint), it would not only not find "currentUser", but it would not  have permissions to create that folder either.
    So, another possible solution could be to grant file creation rights on the network volume "Users".  Another not-so-great idea.
    Hope that helps someone else!

  • I cannot download Google or Yahoo toolbars. It says Firefox could not install file there is an error 203, what does this mean and what can I do to fix it?

    I have Firefox 3.6.16, I upgraded to Firefox 4 but there were many conflicts with Kaspersky so went back to 3.6.16 which is fine but I cannot get Google nor Yahoo toolbars to load. I have tried several times and the same thing happens. I have another computer that I did the same thing with but both toolbars loaded on it.

    See:
    *[[Unexpected installation error -203 when installing add-ons]]
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox

  • Damaged file notification - what does it mean and can it be fixed?

    If InDesign CS3 crashes, and when re-opening the file, says it may be damaged, what might that mean? I can still open the file, work with it, save it, as if everything is OK. Might this be something I can find and fix?
    Thanks,
    Marcy

    I didn't think the link was version-specific other than noting the arrival of .idml as the new format going forward. Indeed, it does work in CS3, and probably better, in my experiince, than .idml seems to work in CS5.
    You must open the file to do the export, but that's all I would do with any file that offers you a warning -- immediately export, and don't overwrite the old file, just in case you find you need it again as a backup (if nothing else, you might be able to copy the text and paste into a new file, or export to RTF or something else somewhat useful instead of having to start from scratch). There is no way I know to predict when a file is going to crash and burn, but continuing to work with a file that tells you it might be damaged is kind of like driving your car and ignoring the smoke coming from under the hood.

  • I am trying to finalize a project but it keeps saying that there was an error (-108) what does this mean and what do I do to fix it?

    I am trying to finalize a project in iMovie but it keeps telling me that there is an error (-108). Can anyone tell me what this is and how I could fix it?
    r0b0c0p

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • TS3694 1015 error code, what does it mean and how do i fix it?

    I bought a Iphone 3G for my younger son. I have attempted to restore and update the phone to errase all of the previous owners information, photos ect. It seemed to get about two thirds of the way through the process before showing an error code 1015 and now the phone is not usable. The screen on the phone now only shows the "connect to itunes screen", connecting to itunes only gives the option to restore until eventually showing the error code again after attempting the restore process!!??
    Has anyone come across any of this before!? Any help would be much appreciated.

    The article you linked from shows the information for that error code.
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You can try recovery mode: http://support.apple.com/kb/ht1808
    Where did you buy this phone?
    EDIT: Also, if it is actually showing the iOS that you describe, then that's a huge problem.  3G has a maximum iOS of 4.2.1, anything else is a jailbreak.
    EDIT 2: Just like KiltedTim said... It's jailbroken, you got scammed, go get your money back.

  • I just downloaded the Adobe Acrobat DC update on my Mac (Yosemite). Now, I can't open any of my PDFs. I'm getting the message "Internal Error Occurred." What does that mean, and can someone help me?

    HELP!

    Hi Sukrit,
    Am also facing the same issue.
    I get below error messages when i open a PDF.
    "An internal error occured"
    I have installed new windows 7 and i was not having pdf viewer. I just downloaded the latest adobe acrobat reader DC for the adobe site and installed in my PC. Thing is, am able to open some of the PDF files (word document that is converted into PDF). But scanned images for example photo or mark sheets that are converted into PDF, am getting this error message.
    I tired almost everything.
    1) un-installed and installed again.
    2) installed previous version of adobe
    3) unchecked the "Enable, protection mode during startup"
    4) tried setting zero for "bproectmode" in the regedit (key_host_local_machine->adobe->dc> Dword with value 0)
    5) created new administrator account, and even there, i got the same error message.
    6) tried repair installation said by Sukrit...
    But nothing fixed my issue
    Please someone help me in fixing this issue.

  • I recorded a Concert video on my D3200 and now I can not play it back on any of my apple devices it states 'OSS status error - 101' what does it mean and how can I correct it and watch my videos on my Mac?  Julie from LEEDS

    How do I watch my imovies on my IMAC and apple TV that i have recorded from my NIKON D3200 .
    message displayed as 'OSS Status error - 101' .... HELP !

    Hi Julie,
    I'm not sure I can help with the "OSSstatus error - 101", but just checked the specs for your Nikon D3200 (nice camera). Certain frame rates with Full HD video can pose problems for iMovie.
    Among other settings, I noticed that the Nikon can record 1920 x 1080 50p (or 60p for NTSC countries). That's 50 progressive frames per second. iMovie has trouble with that Full HD frame rate, but can handle 1920 x 1080 50i - that's 50 interlaced fields per second, being 25 frames per second (interlaced video has 2 fields per frame).
    So, it's possible that you recorded at 50p, hence the problem you are seeing. The best solution for you is to record 1920 x 1080 25p (25 progressive frames per second). That will work fine in iMovie and give excellent results. iMovie works best with progressive video.
    It's not clear from your question whether you've already imported clips to iMovie, or whether you are just having problems when trying to play back or export the clips from iMovie. In offering advice here, I'm assuming that you are having trouble importing to iMovie.
    If in fact the problem is as I've outlined (format/frame rate issue), there is a "fix" that will enable you to import the footage to iMovie. But it is fairly complicated. Here's a link to an excellent article by Ian Odgers that will take you through the steps involved:
    http://ianperegian.com/My_FZ35_38_Webpage/Edit_1080_50p_and_burn_a_disk.html
    John

  • When I try to download something it saya error -50, what does it mean and what do I do?

    I can't download anything and it's really irritating Help please

    First, stop being impatient.  We are users like yourself and not paid to respond.
    Second, what is the precise text of the message appearing?  We are not mind readers.

  • Hi. I have a problem with my iCloud. I forgot my password on my old one so I decided to delete it and make another one. I used my other Apple I.D. but it said that there's an error. What does it mean? Can I still create an account?

    I need some help because I might update my iPad 2 soon.

    Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
    So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
    If someone knows how to fix this and make firefox launch normally, please reply! Thank you

  • Error 40820 - what does this mean and what do i do?

    please could someone help me
    i can't update BBworld or use whatsapp. 

    Hi praneil,
    Welcome to the Community,
    The error you describe generally appear while opening App world have a look at this article of KB KB28188 ,I hope it will help you.
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Tring to download Firefox 5.0.1 but it keeps saying can't load because of sufficient privileges for some of the items. What does this mean and can you help? Thanks! Greg

    When I open my gmail account in firefox it tells me I need to download the new firefox 5.0.1 so I do. After download it tells me to move icon to applications folder, so I do. Then it ask about replacing my old and I say yes. Then it tells me it can't because of sufficient privileges for some of my items. Can you help?

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Maybe you are looking for