Load error code 11 when attempting to open .vi from library

Hello,
Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research.  The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram. 
I am running Vista with 8.5.1 and attempting to open a library of version 6.0.  I do not know what OS the library was compiled on.  (Linux is a possibility)  The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
Does anyone know what might be a way to get these sub-VIs working?

Okay,
File posted.  Someone please tell me if this has a block diagram on it.
Attachments:
Find First Error.vi ‏24 KB

Similar Messages

  • I am getting this error code when trying to open an mpeg4 "OSStatus error -12909" anyone know why. Thanks

    I am getting this error code when trying to open an mpeg4 file "OSStatus error -12909"
    Has anyone had this happen to them.
    I am new to the support community.
    Thanks

    Is this coming from a link, or from something you are trying to type in the address bar?
    Try replacing the "html" at the start with "http",
    so if you have html://somesite.edu,
    change it to http://somesite.edu.

  • Error 16 when attempting to open Premiere Pro

    I get an Error 16 message when attempting to open Premiere Pro trial.  I've uninstalled and reinstalled a few times.  Followed the recommended suggestion to reset permission folders.  Still no luck launching the application.  I also noticed on the crash report EXC_BAD_ACCESS (SIGSEGV) and KERN_INVALID_ADDRESS at 0x0000000000000000. 
    Any suggestions ?

    Thanks.. these recommendations had already been taken into account.  The solution.. adjust the sharing & permissions settings in the Adobe folder.  
    - In Finder locate Library > Application Support > Adobe
    - Then open the info window
    - Unlock Sharing & Permissions
    - Select Read and Write privilege for your user name
    - Click the wheel at the bottom of the window
    - Hit Apply to Enclosed Items...
    - Click the Lock
    - Launch Application

  • Getting error message when trying to play songs from library saying original file could not be found

    when trying to play songs from library, getting message saying original file could not be found .. my full library all says the same .. can anyone help ?

    Hello Ceeclass,
    I suggest this article named iTunes: Finding lost media and downloads found here http://support.apple.com/kb/TS1408.
    It should help you locate the media that is not playing in the iTunes library.
    Take care,
    Sterling

  • Finder throwing error -1401 when attempting to open files on mounted volume

    Alright, this is driving me nuts. At random, Finder will refuse to open files on a mounted volume on my server. It throws the error "The application can't be opened. -1401" and then "The operation can’t be completed. An unexpected error occurred (error code -1401)." back to back. It doesn't matter what the file type is, as far as I can tell (.jpg, .xlsx and .pdf are on there).
    From that point on, I can navigate those volumes to the point that I have navigated them since the volume was mounted at start up, but can't go any deeper into the directories or open anything. Finder also won't eject the volume. I can't open files from within applications, either.
    I have to reboot for it to work again.
    However, if I jump into Parallels I can open anything on the server. Even Acrobat files, which open in the Mac environment and not within the virtual machine.
    Does anyone have any insight to what might be causing this? I searched and can't find anything.
    Thanks,
    Brian

    Restart your computer with the Shift key held down,
    and then open the Startup Items folder inside the
    System Folder. Throw away all of the aliases you find
    in this folder and then empty the trash.
    To quit AppleWorks or another application when it
    won't respond, hold down the Option, Command, and Esc
    keys, and then click the Force Quit button. You
    should also use the Disk First Aid application in the
    Applications (Mac OS 9):Utilities folder to verify
    your hard disk, as something may have been damaged
    when you shut the machine down using that method.
    (11882)

  • Error message when attempting to open iTunes

    Hi everyone,
    I had an outdated version of iTunes installed and I tried to update it for the newest version, but I had lots of problems regarding disk space so I installed the earlier version again to try and reverse what I'd done. Now, all my music is still there (and my library) but when I attempt to open iTunes I get an error message that says 'Choose Library...' and no matter what I do, I can't open iTunes.
    Has anyone had this problem before? I'm on Windows XP.
    Thanks,
    li0n4

    You could try a repair, rather than a reinstall.
    Start > Control Panel > Add/Remove Programs
    Find itunes in the list and press change, then repair.

  • I have this error code when trying to open my adobe illustrator cs5 213:11

    I have an error code of 213:11 when trying to open my Illustrator cs5

    Does this help? Google is your friend
    http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html

  • Adobe Muse Error # 3115 when attempting to open a Site

    I created a Muse Site on my Desktop. When I attempt to open the site on my laptop I get the following message: "The adobe muse site file cannot be opened error #3115." I have Adobe CC installed on both machines and the file is on my dropbox folder. Other sites created under the same circumstances work fine. I cannot find any relevant documentation. I tried importing a Musegrid widget that the site employs before attempting to open the site but that didn't work. It's a rather simple site. It uses one 3rd party widget: MuseGrid Mega Menu One. Any ideas?

    Hello,
    Could you please check if you are able to open the muse file after saving it to some other location on your machine?
    Regards,
    Neha

  • Error -2146827284 When Attempting to Open Excel Workbook

    Using LabView 6.0 and OfficeXP's Excel... I am receiving an activex
    error: -2146827284 when I try to programatically open an excel
    workbook.  The thing is, this is after I have previously opened
    and closed another workbook via activex.  I searched about this
    error on the forums, and while there were a few entries there were no
    hard solutions posted.  Please help.

    Thanks for the help that fixed my problem for the initial error, but I
    still get the same error when I am writing a U16 2-D array to a range
    of cells. This is strange because the same code is used elsewhere and
    does not throw the error, but the data type is instead a Dbl 2-D
    array.  Unfortunately, I am unable to post the code.  It is
    on a stand-alone classified pc.

  • I keep getting error codes when attempting to publish using FTP...

    "The operation cannot be completed because one or more required items cannot be found. (Error code -43)." That pops up before I can enter my FTP password.
    The other one is not popping up right now, but when I finally was able to enter my FTP password, another error code pops up. It was -36. Can't remember the words.
    Please help me. I NEED(ed) to publish this website yesterday! Thank you!

    I got it to come up! The other error code says "The Finder cannot complete the operation because some data in "ftp://[email protected]" could not be read or written. (Error code -36)"
    This is the on that pops up only after I enter the (correct) FTP password.

  • Error Message when attempting to open Premiere Pro in creative cloud

    I am signed into creative cloud and my payment for this month's Premiere subscription was just processed, but I continue to get an error message when looking for the Premiere icon in my "Apps" tab in creative cloud. Any ideas why I can't access the program?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Adobe reader error msg when attempting to open

    when trying to open adobe reader i get the following msg "This app has requested the runtime to terminate in an unusual manor" Contact applications support team.

    Hello,
    Could you please check if you are able to open the muse file after saving it to some other location on your machine?
    Regards,
    Neha

  • I am receiving an error message when attempting to open a pdf.

    It says I dont have permission and to contact owner or administrator. I am the administrator on this computer and all the file permissions are enabled and I even tried running adobe reader as admin. the file is encrypted but Im never asked for a password or anything.

    Hi Rickhoneyford,
    Does this issue occur with any pdfs you attempt to open or is this issue specific to this pdf?
    Regards,
    Rave

  • Error code when attempting to burn a CD

    I have a Satellite S870, just days out of warranty. I am trying, for the first time ever on this machine, to burn a CD and I am getting an error code 319A0-34-00000000 so the burning is not working. Help!

    Hi
    it is possible that the ISO (image) you're trying to burn is larger than the capacity of the disc.
    or the data you're trying to burn is larger than the disc.
    *********Click on Kudos if it helped you. Thanks! ***********

  • Dreamweaver reports file "not found" when attempting to open files from SMB server...

    User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
    Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
    She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
    Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
    So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
    This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
    I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
    Any ideas?
    TIA!!

    I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
    From terminal I run:
    df
    Which returns something like
    /dev/disk0s2                           1951845952 224463456 1726870496    12%    /
    devfs                                         360       360          0   100%    /dev
    map -hosts                                      0         0          0   100%    /net
    map auto_home                                   0         0          0   100%    /home
    //[email protected]/website  204360384  38067872  166292512    19%    /Volumes/website
    //[email protected]/website  204360384  38067872  166292512    19%    /Volumes/website-1
    map -fstab                                      0         0          0   100%    /Network/Servers
    Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
    The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
    It's the same share, same data, but is being referenced by different names, so does not seem accessible.
    BUT
    I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
    Tedious.

Maybe you are looking for