Load external data into se-main-menu

hi,
i've tried to load external data (vars,files)into a selfmade
sony-ericsson-flash-menu for the w810i.
it is possible to load the data for the current active menu
via loadVariablesNum("application://focused", 0);
so i thought i could load some other stuff into the mainmenu.
i tried to load an swf with loadMovie/loadMovieNum.
i tried to load vars from a txt-file with
loadVariables/loadVariablesNum.
and i tried to open a webadress with getURL.
but nothing happens ... :(
the files (swf,txt) are in the same folder like the
mainMenu.(tpa\preset\system\desktop\flash)
maybe the w810 does not execute the swf in the same folder
where it is at the moment?!
is it possible to figure out where the swf is executed?
the _url command is not supported by flash-lite-1.x ...
some ideas?

Hi Joanne,
LSMW - Legacy System Migration Workbench is very user friendly tool provided by SAP for legacy data load.
use link below for documentation
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
You can also, use SAP best practice PCC Excel Template and load programs (delivered by SAP) for each Infotype PA / PD.
Hope this helps.
- Bharat

Similar Messages

Trouble loading external .SWF into my main page with preloaders

Dear All,
I am working on my first Flash project with AS3.
The structure of the flash site is pretty simple. I have a
stage 1165px wide x 710px height
Inside my Stage I have an horizontal bar with a menu followed
by a container right under.
**** My goal
is that whenever I click on one of the button on the menu, that the
related external .SWF loads into
the container with a preloading bar and %. *****
I already did all my .SWF files and it is pretty frustrating
at this point to be stuck at this point of development.
Please help.
-Alex

Visit gotoandlearn.com. There is a video tutorial there
regarding preloading that should answer most, if not all, of your
wonderings.

How to load external data without using external tables

Hi,
I'm asked to develop an ETL for loading external data into a database but, unfortunately, the vers. is 8i so I can't use external tables.
I know that it's possible by using SQL-Loader. What I want to know is whether there's another way in 8i to load external data from a text file or a CSV file directly with a stored procedure without having to write CTL of SQL-Loader on the server. I mean, is there a way to write everything on the database the same manner I'd do whether I wrote data from a table to a file using for example UTL_FILE or the unique way is to write control files of SQL-Loader directly on the server?
Thanks!

Mark1970 wrote:
Thank you very much Karthick
I didn't know I could use UTL_FILE also for reading files. I've always use it only for writing data into external files.Yes you can use UTL_FILE to read. The version of oracle you are using i last used in 2004 :) Still remember giving the OS path of the file to open the file. That is long gone now. Its surprising that you are still in 8i.

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Load external data to symbol (text + images)

Hi there!
I would like to make a symbol that contains one image and one textfield. I've got three buttons, and when I click on each button the symbol shows a different content (so an image and a text depending on what button was clicked, but always inside the same symbol).
I've read that it could be done using an external JSON file, though I really don't know how to do that.
Do you have something that could help me achieve this?
Thank you very much!

Mmmh not really,
Actually I would like to load these data into a symbol by clicking on another symbol, but these specific data are extern (like an image from another folder in my project files).
What I would like to achieve actually is an image gallery: when I click on a symbol (that is kind of a thumbnail), it show that other symbol which contain the image and a description. But these image and description changes regarding which thumbnail we clicked on.
Does that make sense? =/

Error 3 when loading external data

Hi Gurus!!
I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
Now I get the following error:
Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
Error 3 when loading external data
The file looks ok when i compare it with the ones i received earlier.
Any ideas what this error 3 is all about?
Thanks in advance!
Pontus

Hi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus

Error 1 when loading external data

Hi BW( Best and Wise) friends,
I am not able to load data into my infocube. My source system is a PC file.
Message "Error 1 when loading external data is displayed." when scheduled.
When I checked the error details using Monitor button,
During extraction, the data request was arranged(indicated by green mark),but there was error in data request(red).
During extraction,data request was received (green),but there was some error in data selection(red).
Anticipating good solution.

HI all,
1.The flatfile matches with the transfer structure
2.The file is a .csv format file only.
3.The path is correct
I had chosen comma as my data separator.
I had declared fields in the following way in the XL csv file
Name of the candidate text
Name of the party- text
Age-number
Number of votes gained number
Calendar day text.
I had already tried the following.
When I clicked the preview in the external data tab of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message error 1 when loading data is displayed.
4. The details tab of the monitor showed the following:
Overall status : Errors occurred: or: Missing messages-red
4.1)Requests(messages):Errors occurred-red
 Data request arranged-green
 Error in datarequest-red
4.2)Extraction(messages):Errors occurred-red
 Data request received-green
 Error occurred in data selection-red
4.3)Transfer(IDocs and TRFC):Everything ok-green
 Info IDoc 1: Application document posted-green
 Info IDoc 2: Application document posted-green
4.4)Processing(data packet): No data-yellow
I had initiated the discussion in the forum with this information only.
Regards,
Balaji
Message was edited by: balaji vijayakumar

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade

Error in Loading FIGL data into a standard ODS

Hi,
I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Second step in the update
Second step in the update
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
Please help me with this problem.
Ramon

Hi,
Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK

Error While loading the data into PSA

Hi Experts,
       I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created       YOKYY on   20.02.2008   12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.

Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK

While loading transaction data into cube what are the tables generats

Hi,
while loading transaction data into cube what are the tables normally generats.

Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva.

Best method to load XML data into Oracle

Hi,
I have to load XML data into Oracle tables. I tried using different options and have run into a dead end in each of those. I do not have knowledge of java and hence have restricted myself to PL/SQL solutions. I tried the following options.
1. Using DBMS_XMLSave package : Expects the ROWSET and ROW tags. Connot change format of the incoming XML file (Gives error oracle.xml.sql.OracleXMLSQLException: Start of root element expected).
2. Using the XMLPARSER and XMLDOM PL/SQL APIs : Works fine for small files. Run into memory problems for large files (Gives error java.lang.OutOfMemoryError). Have tried increasing the JAVA_POOL_SIZE but does not work. I am not sure whether I am changing the correct parameter.
I have read that the SAX API does not hog memory resources since it does not build the entire DOM tree structure. But the problem is that it does not have a PL/SQL implementation.
Can anyone PLEASE guide me in the right direction, as to the best way to achieve this through PL/SQL ??? I have not designed the tables so am flexible on using purely relational or object-relational design. Although would prefer to keep a purely relational design. (Had tried used object-relational for 1. and purely relational for 2. above)
The XML files are in the following format, (EXAMINEEs with single DEMOGRAPHIC and multiple TESTs)
<?xml version="1.0"?>
<Root_Element>
<Examinee>
<MACode>A</MACode>
<TestingJID>TN</TestingJID>
<ExamineeID>100001</ExamineeID>
<CreateDate>20020221</CreateDate>
<Demographic>
<InfoDate>20020221</InfoDate>
<FirstTime>1</FirstTime>
<LastName>JANE</LastName>
<FirstName>DOE</FirstName>
<MiddleInitial>C</MiddleInitial>
<LithoNumber>73</LithoNumber>
<StreetAddress>SomeAddress</StreetAddress>
<City>SomeCity</City>
<StateCode>TN</StateCode>
<ZipCode>37000</ZipCode>
<PassStatus>1</PassStatus>
</Demographic>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>1</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>2</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
</Examinee>
</Root_Element>
Thanks for the help.

Please refer to the XSU(XML SQL Utility) or TransX Utility(for Multi-language Document) if you want to load data in XML format into database.
Both of them require special XML formats, please first refer to the following docs:
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/xsu/xsu_userguide.html
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/transx/readme.html
You can use XSLT to transform your document to the required format.
If you document is large, you can use SAX method to insert data into database. But you need to write the code.
The following sample may be useful:
http://otn.oracle.com/tech/xml/xdk_sample/xdksample_040602i.html

Option to load XML data into BI 70

Hi All,
I have read some postings on forums and also have read the "HOW TO load XML data in BW" guide. I am confused when I read the SAP online help documentation for loading XML data .
Question : Out of the 3 options listed below which option is best suited for loading XML data into BW . XML file is going to be provided by 3rd party company ?
Thanks and appreciate any input .
Smith .
Here is what I found for BI 70 EHP1 help :
http://help.sap.com/saphelp_nw04s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Data is generally transferred into SAP BW by means of a data request, which is sent from SAP BW to the source system (pull from the scheduler). You can also send the data to SAP BW from outside the system. This is a data push into SAP BW.
A data push is possible for various scenarios:
●     Transferring Data Using the SOAP Service SAP Web AS
●     Transferring Data Using Web Services
●     Transferring Data Using SAP XI
In all three scenarios, data transfer takes place using transfer mechanisms that are sufficient for Simple Object Access Protocol (SOAP); the data transfer is also XML-based.
The SOAP-based transfer of data is only possible for flat structures. You cannot transfer hierarchy data.

Hi,
I feel you can go with 2nd option. But still wait for some more inputs from Experts........
Regards,
Suman

Step- by- Step on How to Load Excel data into Crystal Reports?

Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
Vijay

It's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

XML files imported into SPRC are not properly loading associated data into SPRC

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

Load external data into se-main-menu

Similar Messages

Maybe you are looking for