Load F4V into Media Encoder CS4?

I am trying to convert a F4V into a FLV but Media Encoder will not load it.
Thanks,
Jose Burgos

Please re-ask in the Flash forum.

Similar Messages

  • Load a F4V into Media Encoder

    I have a F4V made using Flash Media Encoder Live. I ran it throught the production command prompt software converting it to a single moof atom file. The songle moof atom F4V plays in Flash Media Player and Flash but will not load into Media Encoder CS4. I am trying to convert it into a FLV using Adobe Media Encoder. Anyone know what I need to do to make this happen?
    Thanks,
    Jose Burgos

    Please re-ask in the Flash forum.

  • F4v encoded with Adobe media encoder CS4 (longer than 71 minutes)

    Hi I don't know if this is the correct place for this post. So apologies me if this is the wrong place.
    Encoding with Adobe Media Encoder CS4 (4.2.0.006 and 4.0 too)
    Source: MOV (DVPAL) longer than 71 minutes
    Dest: F4V (H.264)
    Result: freezed frames and only plays audio at 01:11. Media Player goes crazy and starts showing some diferent parts freeze frames.
    In Quicktime crashes, in VLC the same of MediaPlayer. Sometimes the audio starts to downsampling and sounds like the pitch goes down.
    Totally agree with this other post: http://forums.adobe.com/thread/580391
    (extract)
    I recentlly encoded afew F4V using Adobe Media Encoder Cs4.  MOst of them are working properly but I don't know why, all of my video that are longer than 71 minutes seems to have trouble playing back.  They all Freeze when they reach 71 minutes or if I navigate pass this point.
    thanks and help us please!
    Kik

    Thanks for the interest.
    I'll try to explain all details:
    MacPro 1.1 (mid 2006) under Mac OS X 10.4.11 (Darwin 8.11.1 kernel)
    System files: journaled HFS+ and a unix based NAS (under samba connection)
    I have all material on the NAS and also I make the transcoding over it. Is a simple mov containing DV PAL WIDE interlaced 25fps with stereo audio. typical settings with nothing out of DV PAL standard.
    The version of MediaEncoder CS4: 4.2.0.006 (it happens with older versions too)
    The settings of MediaEncoder are:
    Audio: AAC stereo 44,1 kHz
    Video: F4V. MainConcept H.264, fps like source, profile high, level 4,1. CBR compression.
    The problem only appears with videos longer than 71 minuts. At 01:11 starts with crazy problems. It seems like the player have some read or problems.
    Tell me if you need some other kind of information.
    thks

  • Media Encoder CS4 for Mac will not load

    Hello!
    Can someone please help me... I am on a mac book pro and trying to export a video from Premier Pro CS4..  Media Encoder CS4 refuses to load...  I am using a trial version... is this the problem?  I own Adobe Creative Suite CS4 and all is registered.  I am just not sure what the problem can be...   I have also looked for the encoder trial version to re-install but cannot seem to find it.
    HELP!
    ***********Here is the error message below************
    Process:         Adobe Media Encoder CS4 413
    Path:            /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app/Contents/MacOS/Adobe Media Encoder CS4
    Identifier:      com.adobe.ame.application
    Version:         4.1 (4.1)
    Code Type:       X86 (Native)
    Parent Process:  launchd 72
    Interval Since Last Report:          994 sec
    Crashes Since Last Report:           2
    Per-App Interval Since Last Report:  20 sec
    Per-App Crashes Since Last Report:   2
    Date/Time:       2009-11-16 01:08:40.998 -0500
    OS Version:      Mac OS X 10.5.8 (9L31a)
    Report Version:  6
    Anonymous UUID:  90D2C0AC-0761-460C-ABEF-1D7D12EF944A
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
    image not found for lazy pointer at 0x222e65b9

    I have the exact same error message...
    can some1 please give a solution to this problem. Now i cannot export anything from premiere pro trial version because the Adobe Media Encoder keeps crashing with this message.

  • Adobe Media Encoder CS4 error

    Hi,
    I've just purchased Flash CS4 and tried the "Adobe Media Encoder CS4" that comes with it.
    When attempting to launch it, I get this (see attachement) error and the program doesn't launch.
    Anyone aware of the cause of this error ? How I could get it resolved etc..
    Thanks in advance.

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Adobe Media Encoder CS4 error in elearning suite trial version

    Hi there, I have a trial version of elearning suite 2.5 and I have the error "Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder". My searching points me to a full reinstall, but is there an easier fix? Currently running Mac OS 10.5.8. Thanks.

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Media Encoder CS4 No Error No File (Says It's Created, but It Isn't)

    I have tried repeatedly today to encode an QuickTime container to P2 format, and while Adobe Media Encoder CS4 appears to load correctly, do the conversion, and confirm the file creation, I can not find the file that was supposed to be created.
    There is no error message.  Below is the transcript of the log from one attempt:
    9/10/2009 5:38:41 PM : Queue Started
    - Source File: F:…\NASDAQ\0001DI.mov
    - Output File: C:…\Desktop\0001DI_1.MXF
    - Preset Used: DVCPROHD 720p 30
    - Video: 960x720, 29.97 [fps], Progressive
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:22
    9/10/2009 5:39:04 PM : File Successfully Encoded
    9/10/2009 5:39:04 PM : Queue Stopped
    Only, no where on my computer is there the file “0001DI_1.MXF”.  Not only have I looked in the Desktop folder where it is supposed to be.  I have searched both hard drives on my computer for that file.  This has happened repeatedly with variations of the output file name in the last hour or so.
    I have rebooted the machine.  I have run error-checking on the hard drive. Even though only log into my with my own account and no one else uses it, I have even created a text file with the same name, just in case the file that was created was there but hidden. I had no problem creating the text file in the directory where the output from Media Encoder is supposed to be.
    My suite was fully patched when this was run (except I did install an upgrade to Adobe Reader after this problem occurred when I checked to make sure my software was current).
    I used Media Encoder earlier in the day to create a P2 MXF file from the same source file earlier in the day, and have used it to create other output formats.
    I am working on a Windows XP Professional machine.
    Any ideas?

    Quick postscript that may be relevant...
    I converted the same file I’m having trouble with to WMV format. It worked fine, but the output file name I wanted to give it was long (more than 8 letters not counting the extension). The name of the file created by Media Encoder was only the first 8 letters plus the extension.
    I had no problem manually renaming the file it’s full name (over 20 letters long). It seems Media Encoder couldn’t do that.
    That still begs the question why it didn’t work when I tried to create an MXF file only one letter long. Here is the section of log where I tried to do that. As before, it says the file was created.  I couldn’t find it.
    9/10/2009 5:03:29 PM : Queue Started
    - Source File: F:…\NASDAQ\0001DI.mov
    - Output File: F:…\NASDAQ\a.MXF
    - Preset Used: DVCPROHD 720p 30
    - Video: 960x720, 29.97 [fps], Progressive
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:26
    9/10/2009 5:03:56 PM : File Successfully Encoded
    9/10/2009 5:03:57 PM : Queue Stopped

  • Adobe Media Encoder CS4 problem

    I having a ***** at Adobe
    I do have a lienced copoy  CS4 Design Premium. I down loaded premier  pro CS4 to demo it about 8 months ago and had not used it up to about 1 weeks ago. All that time Adobe Media Encoder CS4 did not work. I came back to the problem last week when I wanted to convert a video to a FLV file, did not work, I went through uninstalling and reinstalling Design Premium: reloaded parts of the the suite still did not work: went to the forums and tried every which way to get resolution nothing worked. This morning I opened up Premier  and  it world not open without serial key I was only a week into the 30 trial period. So I uninstalled premier. Reloaded the Media Encoder and guess what it worked. I am know looking at buying another product. Another thing while using the trial version I could not demo encore CS4.
    ****** off
    PS I have now uploaded the FLV to my website. I never had any problem with AME CS4 until I loaded Premier CS4
    Ian Cleland

    These directions are specifically for windows 7 x64
    It may be hidden since it's a system folder. You can get to it one of two ways.
    Either: Hit start button + r to get run, then insert  (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
    Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files".  This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
    If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

  • Premiere Pro CS4 Export fails with Media Encoder CS4 "Encoding Failed"," Could Not Read From Source.

    There has never been a history of Adobe CS3 installation on the brand new MAC Pro I am using prior to installing Master Collection CS4, despite other posts claiming that chief cause of this issue is a previous CS3, Beta or trial installations of previous versions. I simply had a straightforward installation of CS4 and have had trouble since day 1.
    I have uninstalled and reinstalled Master CS4 three times, two times with the action script cleaner for CS4. I tried changing Adobe Cache folder locations to alternative drives. I ran shift start many times to correct any inconsistencies and corrected for permissions using disk utilities repeatedly. All updates have been installed and I am still getting the same error when exporting my timeline to Media Encoder CS4, be it a large High Definition project or a small one consisting of few stills.
    No matter what presets I chose, the job appears as one of the items in the render qeuee of Media Encoder CS4 and sits there with the status WAITING until i hit Start Queue. When I do, it still says WAITING under Status and at the bottom corner of the window it reads : Loading "project name.prproj" and after an average of about 6 minutes, a yellow caution sign appears. No render whatsoever takes place. When I click on the yellow caution sign, it reads a log of all errors in connection with each job, including the ones that have gone before it. Here is one:
    Start of the Error Paste
    - Source File:/users/myname/Library/Caches/TemporaryItems/test.prproj
    - Output File:/ users/my name/Documetns/Adobe/Premiere Pro/4.0/Sequence 01.mov
    - Preset used :NTSC DV
    - Video:
    - Audio:
    - Bitrate:
    0 Encoding Time: 00:33:01
    Sat Mar 21 17:12:25 2009 : Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    END OF ERROR Paste
    Please any gurus out there know how to troubleshoot this damn thing on Mac, I really appreciate it. I have not yet encountered any posts of Mac owners with no previous CS3 installation having this issue. I am in the middle of 3 projects with tight deadlines and need your urgent help. THANK YOU!

    Hello There,
    I resolved the issue through a simple process of elimination. So simple in fact I wonder how I missed it. Since there has been no history of prior CS3 installation on this machine and every conceivable trick was applied to resolve the problem (refer to my original post earlier in the thread) ending in frustration, the problem had to reside in a factor or series of factors that were only present in this machine. Of the two remaining causes different in compare to other machines, I had to look into the possibility of any hardware and/or software conflicts. After all, this very same installation works perfectly fine on my colleague's Apple Macbook Pro and several Windows machines.
    It turns out that I had installed Pro Tools on this machine that comes with all kinds of optional plug-ins in the so called ignition pack. One of these optional plug-ins is called IZOTOPE (three varieties include Spectron, Trash and another one that escapes my mind). They were all lite version licenses that would automatically pop up on their own when you would start a program where they had been residing. One such program where an association existed was indeed the Premiere. An annoying dialogue box directing you to buy the full version when you would start the premiere would refuse to go away. Sometimes it would even start on its own culminating in a a permanent dialogue box.
    The cause of the problem was right before my eyes and I had overlooked it. Once uninstalled using IZOTOPE clean uninstaller on step 4, the problem was resolved. Projects are now loading very fast into the AME and encoding begins in earnest. I have never had any issues ever since.
    Long story short, if you have any plug-ins specially the ones that are loading upon the start of any program or the ones that reside inside the premiere or the ones that start on their own independently, they could be one of the highly probable causes of this error. I have seen other similar posts complaining of plug in folders inside premiere that needed to be moved to resolve the issue for instance the ones that needed to be moved to AE folders. If you are a plug-in admirer, I would suggest to look into them seriously.
    On the side note, many combination and causes may lead to the same error. I am not claiming that this is the solution for everyone.
    It must also be noted that I applied the trick of creating a shortcut of Premiere (and naming it exactly as such) and dropped it into the Adobe Dynamic LInk folder (even though this was suggested for windows)and have changed the adobe Cache locations to an alternative folder on a separate drive. I haven't been able to establish conclusively if the latter steps are also essential in fixing the error on MAC but I can confirm that since the latter steps were taken before the uninstalling of Izotope plug-ins and i still had issues, probably uninstalling those plug ins or finding a way to move them to a place where they don't interfere (if you absolutely need to keep them) is the one essential step that solved the problem.
    Hope this helps.

  • Can Ppro CS3 projects be imported by Media Encoder CS4

    Hello:
    I have Ppro CS3. I also have the Design Suite CS4.  I would like to render out Ppro CS3 sequences or projects into F4V files in Media Encoder CS4.
    Does anyone know if this is possible?  When I select "add Premiere sequence" in Media Encoder CS4 and find the Ppro project in the file tree Media Encoder hangs just upon selecting the Premiere project without even attempting to add to the render queue.  I am not sure if this is because CS3 project are incompatible, or for some other reason. As mentioned, Media Encoder CS4 hands as soon as the Premiere project is clicked to selected and before "ADD" is clicked to add to the render queue.
    Anyone come across this problem?  Is it fixable, or are Ppro CS3 projects just incompatible with Media Encoder CS4.
    Thanks.
    Jeff

    I appreciate the reply.
    However, unfortunately, I do not have Premiere Pro CS4.  This is why I am trying to export to Media Encoder CS4. I own the Design Premium CS4 suite which has Media Encoder CS4 version built in.
    Media Encoder actually is a stand alone product.  When you bring the program up, It has import options for the files you wish to encode.  One of the options is to import a PPro sequence.  However, when searching the system for Sequences, I could only figure out how to get to the Pproj files. 
    Documentation appears to indicate the Pproj files are compatible with Media Encoder.  However, when I droped in the Pproj file from Premiere Pro CS3, I got a message that it was not a compatible file (message text may not have been that exact statement).
    This is why I was curious to see if there is a version compatibility issue, or if someone can tell me how to other render out of Premiere CS3 into the Media Encoder version that comes with CS4 suites.
    Thanks.
    Jeff

  • Help... Media Encoder CS4 isn't working...

    Ok... I am just fed up with Adobe Premiere CS4. I have had it for two years, and it is just problem after problem after problem. I'm currently working on an important project. First, I finished the project, and went to load it, and it wouldn't load past 95%... so I had to recreate over half of my hours of work. Now... when I go to export my project, it goes into Media Encoder, and never exports. It gets stuck on the "waiting" command, and never goes. I even left it over night, and nothing happened. I am extremely frustrated with this software... it is full of problems. Any help would be greatly appreciated.
    I highly doubt my specs are the issue... but here they are...
    Windows Vista Home Premium
    Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz 2.67 GHz
    9.00 GM RAM
    32-bit Operating System

    A 32-bit OS will only ever use up to 4 GB RAM.  So you're handicapping yourself there.  Plus, Vista 32-bit is probably right behind Windows ME for worst Microsoft OS ever.
    Nice CPU though. 
    For the AME issue, how long do you wait?  With page file swapping likely, it may take an unusually long time for the encoding to get started.  And if the memory requirements for what you are trying to do exceed 4 GB (including swap file space), then you won't be able to get any output from the AME at all.
    -Jeff

  • Adobe Media Encoder CS4 Crashing Immediately

    Hello,
    I am running the CS4 Production Premium suite on a Windows 7 64-bit computer with 12GB RAM. Up til last week, the whole Adobe suite had been running smoothly. (I primarily use Premiere, Media Encoder, Photoshop, and Encore).  However, Encore started locking up the computer any time I tried to work on authoring a Blu-ray (it locked up immediately upon opening a Blu-ray project, and only locked up on a new project when I switched from DVD to Blu-ray mode). 
    I assumed that some of Encore's source code had either been moved, overwritten by something else, or that there was possibly a program incompatibility with something else on my computer. So I took the step to uninstall and reinstall Encore from the install DVDs.
    Upon a "successful" reinstallation, I then went into Premiere CS4 to encode a timeline to a P2 file. Premiere seemed to be doing its normal exporting process fine, but Media Encoder would crash after the red splash screen disappeared. To be more explicit, the red splash screen would disappear and be replaced by a window the normal size of the Encoder program, but nothing appeared on screen in the window other than a small white box in the upper left with the rest just being plain gray (see attached photo). At the same time this white window appeared, Win 7 popped up a box saying that Adobe Media Encoder has stopped working and that it would search for a solution to the problem, which it never could do.
    I then tried deactivating the suite, uninstalling the full suite and reinstalling, updating so the patches would bring it up to date, and then tried running Adobe Media Encoder again, this time running from the Start menu rather than from Premiere. Yet, it was still the same response: the program crashes immediately.
    I would appreciate any suggestions and help that people can provide.
    Sincerely,
    Kevin T
    San Diego, CA

    Here is the only relevant info I could find in the Event Viewer:
    Faulting application name: Adobe Media Encoder.exe, version: 4.2.0.0, time stamp: 0x4af13937
    Faulting module name: WatchFolder.dll, version: 0.0.0.0, time stamp: 0x4af1344e
    Exception code: 0xc0000005
    Fault offset: 0x00011f03
    Faulting process id: 0x834
    Faulting application start time: 0x01ca9d3e4234c82b
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Media Encoder CS4\Adobe Media Encoder.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Adobe Media Encoder CS4\WatchFolder.dll
    Report Id: 89095e2b-0931-11df-a5f1-00248c778de6
    Does this seem fixable to anyone?

  • Adobe Media Encoder CS4 doesnt allow me to set the bitrate?

    I have a Video file that I need to encode to several f4v
    files at different bit-rates, but it seems I cannot change the
    bit-rate in Adobe Media Encoder CS4?
    I used the previous version to encode, but I cannot encode to
    f4v, only flv.
    Is there something I am missing here?

    Sorry, found it,
    Didn't realise I could scroll down to find more options in
    the Encoder Window

  • Problem Encoding WMV to FLV with Media Encoder CS4 (but not with CS3)

    Hello,
    I have been attempting to encode some WMV files with Flash Media Encoder CS4 (I have Adobe Creative Suite CS4 installed) but it has failed, generating this error:
    - Source File: C:\Documents and Settings\usf\Desktop\incoming\ch01.wmv
    - Output File: C:\Documents and Settings\usf\Desktop\incoming\ch01_3.flv
    - Preset Used: Custom
    - Video: 624x343, Same as source [fps]
    - Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
    - Bitrate: VBR, 400.00 [kbps]
    - Encoding Time: 00:06:36
    5/28/2010 11:26:16 AM : Encoding Failed
    Error compiling movie.
    Unknown error.
    On another computer where Adobe Media Encoder CS3 is installed (with Creative Suite CS3), I experience no such problem.  I do notice that when I add the WMV to Adobe Media Encoder CS3, it opens a window that prompts me to use "ffdshow", which will apparently work if it's configured to decode the file.  I click "OK" and start the queue in the encoder.  A few minutes later I get a successfully encoded FLV file.
    I have come to question whether Adobe Media Encoder CS4 should be re-installed, whether the entire Suite should re-installed, or if there is some patch or fix I can install somewhere.  Adobe Media Encoder CS4 is installed on my "production" computer which also has Adobe Premiere Pro (CS3) and Adobe Premiere Elements (7).
    Could use some advice here.
    Glen
    P.S.  the files will also not export to FLV using Adobe Premiere or Premiere elements...

    Again, the reason we are capturing with Windows Media Encoder is because we tried using Live Flash Encoder to capture directly into flash but our equipment wasn't fast enough and it was dropping frames all over the place.  We also don't have the space to capture into an uncompressed format because we don't have the available storage, and our events can be 8 hours long or more (each video is about 15 minutes, 20 or more videos)
    Ive listened to everything in my workflow and it sounds fine until the outputted FLV file from AME.
    WME is capturing at the following specs:
    160kbps 48KHz Windows Media Audio 9.2 codec (stereo) 1 pass CBR
    1800kbps 1 pass CBR video
    29.97 fps
    640x360 resolution
    buffer size: 5 seconds
    key frame interval: 8 seconds
    I have verified this with a codec info utility I ran on the wmv files.
    AME is encoding with the following specs:
    FLV Multiplexing
    On2 VP6 codec
    620x360 resolution
    800kbps 2 pass VBR
    100% undershoot at best quality
    160kbps stereo MP3 audio
    I verified the above with the same codec info utility (gspot 2.70a) and it is all acurate, it also told me that the audio is at 44.1KHz rather than 48 (there was no place to specify this, is this a limitatino of the VP6 codec?)
    Yes, these are our source assets.  They're being captured either through an XL2 via firewire, or from an analog program feed converted to firewire via a Canopus converter box.
    If anyone has any suggestions on how to get rid of this, or a different encoder (either to capture with rather low cpu resources, or to encode into flash) let me know.  I can provide a sample of the clipping if you need
    Thanks,
    Peter

  • Adobe Media Encoder CS4 problem with watchfolder.dll

    When i loading Adobe Media Encoder CS4, i have this error and application crash:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Adobe Media Encoder.exe
    Application Version: 4.0.0.0
    Application Timestamp: 48b3250d
    Fault Module Name: WatchFolder.dll
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 48b32139
    Exception Code: c0000005
    Exception Offset: 00008a83
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1049
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    OS Version: Windows Vista Ultimate SP1
    Processor: Core 2 Quadro 2,66 Ghz
    Memory: 4GB

    These directions are specifically for windows 7 x64
    It may be hidden since it's a system folder. You can get to it one of two ways.
    Either: Hit start button + r to get run, then insert  (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
    Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files".  This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
    If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

Maybe you are looking for

  • Help needed in send and reciving file realtime over the web!

    Here is a scenario what I want to do and need some ideas about proceeding. I have a directory where the files are being added every 5 to 10 seconds. These files are to be transferred one at a time to some other location using some kind of secure prot

  • How can you have all pages open at the same display size, instead of having to hit Ctrl+ to get the size you want?

    In IE the page can either be set to 100% or whatever you wish, and once set future pages open up displayed the same way. With FF every time I open a page I have to hit ctrl+ about 3 or 4 times to get it to fill the screen I have tried changing the de

  • Problem with JBoss startup in a zone

    Hi! I try to run JBoss inside a sparse-root zone, but encounter a problem during startup, it simply stucks always at a certain point. This is how the zone is configured: root@mantis:/usr/local/Dtrace # zonecfg -z setam-test zonecfg:setam-test> info z

  • Java tv APIs

    Hey there, I am trying to develop a software through which I can view all tv channels(and yeah radio too) (digital + nondigital + interactive) available in my region asia on my Pentium II machine. My questions are Q1. What hardware I use to get best

  • How do you a file to plain text?

    I Have a resume that i want to change to plain text, it's driving me crazy, someone help.