Load failed in production 0_fi_ar_4
Value 'VAT special ' (hex. '56004100540020007300700065006300690061006C00 ') of characteristic 0REF_K
Please help.
Thanks
Rita
Rita,
'56004100540020007300700065006300690061006C00 ' has space a last. Try to edit in PSA and load.
Hope it Helps
Srini
Similar Messages
-
A required application library failed to load and the product cannot continue
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
PictureJohn,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
When in the design view of a JSF page, the page never renders in JDeveloper 12c. Instead I get an error message 'Loading failed Reason: Connection reset by server'. I traced this to a conflict with the port used by Cisco Anyconnect (5001) which seems to be something JDeveloper uses as well to render the page. Is there a way to change the port used to render the page in design mode? I could not find any settings in the preferences.
Hi Frank,
The proxy settings are set to use the system default proxy settings in JDev and I have not needed to change it when VPN'ed.
The product that is in conflict is the 'AnyConnect Web Security Agent' (acwebsecagent.exe) which runs whether I am on vpn or am in the office - it is listening on port 5001 and that is the same port jdev64w.exe is listening to when rendering the page in the design mode. I confirmed this using netstat -ab. After getting the conflicting program switched off temporarily, the design mode of the page was rendered within the IDE so that I could then drop components on the design surface.
Since I cannot get the Cisco product to listen on a different port, I am hopeful there is a way to modify the port used by JDev.
Thanks,
Sunil -
Storer: DB Driver Load Failed
My Zen 7 server randomly stopped storing inventory data in the sybase database. I see a bunch of .str files in \ZENworks\Inv\ScanDir\DbDir. Looking at the logs, I see that storer is having trouble loading the database driver
[11/7/11 17:55:59.010] ZENInv - Storer: DB Driver Load Failed
com.novell.zenworks.desktop.inventory.storer.Datab aseException: DB Driver Load Failed
at com.novell.zenworks.desktop.inventory.storer.Datab aseOperator.<init>(DatabaseOperator.java:739)
at com.novell.zenworks.desktop.inventory.storer.MainT hread.run(MainThread.java:539)
I checked \ZENworks\Inv\server\lib and it appears that the .jar files are in there per the solution in this article http://www.novell.com/documentation/...Server_Inv.pdf
Anything else that I can try?joshbilsky,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Need help finding the row where BI load failed
Hi all,
We use an ETL tool to load data from our staging database into our production data warehouse environment. The environment is Oracle 10g Release 1 on Red Hat Enterprise Linux Server. The ETL tool is Business Objects Data Integrator. At hand the issue is that the data load failed due to an Oracle error
ORA-12899: value too large for column
When I examined the table definition in question, the load fails on one of the table columns in staging since the column is a VARCHAR2 with length of 5 and the ETL load wants to load a value for the table of length 13.
One possible solution is to change the column definition to accomodate the data load. However, since this is a production system, I cannot do this right now.
Is there a method to find exactly what row it failed on during the ETL load for the table in question?
Thanks!
B. Scott1) Yes, DML error logging is nice feature but it is New Feature in Oracle Database 10g Release 2.
2) Some tools (e.g. Oracle Warehouse Builder) enable you to run your "mappping" (ETL job) in 2 modes - set based (single transaction INS/UPD/DEL/MERGE) or in row based mode (PL/SQL loop, row by row processing). OWB even enables failover mode (I failed in set-based mode, let's failover to row-based mode to find out where is the problem; the errors will be reported in log; you can set maximum number of errors before the mapping terminates with failure status).
3) If you do not have this functionality in your tool than I suggest: Try to understand the transformation and investigate the source data. You can usually find the culprit in the source data. Sometimes you can even extract the SQL behind the transformation and run CTAS (create table as select) and find the exceptions.
Regards,
Pavel -
Hello all,
I am trying to load data in Production and i have all the permission.This is for 0OPERATION_TEXT and i created the infopackage, its firast time thus there is no existing load in Process Chain.Everytime i load the data, after loading around 200thousand plus data it fails and gives me the following error 'Lock NOT set for: Loading texts.' and the other error message is 'User BWREMOT locked the load of texts for characteristic 0OPERATION.'
The diagnosis says
" User BWMOT is preventing you from loading texts to characteristic
0OPERATION . The lock was set by a master data loading process with the
request number (DataPcakage number) "
And the Procedure says:
"Wait until the process that is causing the lock is complete. You can
call transaction SM12 to display a list of the locks."
thanks.Hi Krish
go into your info package and under the last tab, near the "start" button you will see a the process chain ICON. If you notice that, then that means its there in the process chain and if you reloading it again (manually), you might be loading subsequently.
make sure its included at only one place and also check for any dependenices while loading in the info pak...
Hope it helps
kalyan -
We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name S/Up Type Size Create Time
$logfile_1 0 3 64 1193046:28:15
Factory_Default_Config.cfg 0 5 354 24:01:02
SRW224G4P_SRW248G4P_boot.bix 1 1 1377600 00:01:03
certificate 0 8 18040 24:00:56
startup-config 1 5 5651 25:00:38
startup1.cfg 0 5 5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name S/Up Type Size Create Time
All I got now after restarting the switch is:
File Name S/Up Type Size Create Time
Factory_Default_Config.cfg 1 5 354 24:01:02
certificate 0 8 18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance. -
Have problems with the Security in Flash i think.
have a App witch runs perfect from inside the Firewall
due to Company rules i have to pass from outside via a SSL
Server.
Now my CF Flash Form App didn't load properly. Says after 40%
"RSL Load Failed!"
try to fix it with code found in Flash article "Security
Changes in MM Flash Player 7"
<CFFORM name="form" format="flash" width="100%"
height="168" skin="haloblue" onLoad="initForm()"
wmode="transparent" style="margin:0; padding:0; backgroundAlpha:
0;">
<cfformitem type="script">
function initForm()
alert("security loading");
System.security.loadPolicyFile("
http://server.from.int/licportal/crossdomain.xml");
</cfformitem>
<CFOUTPUT query="get_news">
<CFFORMITEM type="html">
<A href="#get_News.link#" target="_blank">
<FONT face="Verdana, Arial, Helvetica, sans-serif"
size="10"><B>#get_news.title#</B><BR
/></FONT>
<FONT face="Verdana, Arial, Helvetica, sans-serif"
size="10">#get_news.description#</FONT>
</A>
<P><IMG src="images/dotline-250-006699.gif"
name="image" width="100%"/></P>
</CFFORMITEM>
</CFOUTPUT>
</CFFORM>
crossdomain.xml File Content:
<cross-domain-policy>
<allow-access-from domain="server.from.int"
secure="false" />
<allow-access-from domain="*" secure="false" />
</cross-domain-policy>
found out, that alert does not appear there for my
ActionScript was not yet Executed.
Please Help me out.Aprophis,
I am experiencing the same problem. My company too uses an
SSL server to allow access to our intranet externally. I believe
the product is part of Sun One, the guys in charge of it call it
the rewriter. To me it is a black box which I cannot obtain any
debugging from.
Here's what I've found so far:
1. The SSl "rewriter" reformats all
urls from http:intranet.mycompany.com to
https://rewriter.mycompany.com/
http://intranet.mycompany.com.
I've found it didn't rewrite <param name='src'
value='/1695237829.mxml.cfswf'/> and the flash control didn't
load at all. So I copied the code it generated from view source and
pasted it below. Now I get the blank space where the flash should
be and then a copy of it which generates the error,
RSL Load Failed! 40%.
2. According to
a
discussion on WebmasterKB, the mx code generated has a relative
path to the CFIDE directory. By CFDUMPing the form
(var="#formname#") I was able to obtain the mx code. I pasted it
above the object code that was generated by cfform described in #1
and wrapped it in CFSAVECONTENT variable="formname". I found the
code that said, rsl="/CFIDE/scripts/cfform.swc" and modified it to
be https://rewriter.mycompany.com/
http://intranet.mycompany.com/CFIDE/scripts/cfform.swc.
Unfortunately this did not fix the problem.
3. I also found formScope.send was
pointing to a relative URL and edited that too, but still no
luck.
Have you resolved your problem yet? If, so please share your
solution. Anybody else out there have ideas on how to solve
this? -
DB: Oracle Database 10g Release 10.2.0.4.0 - Production
ApEx: 3.1.2.00.02
IAS: 10.1.2.3
OS server: Windows 2003 SP1
OS client: Windows XP
IE: 6
Here's the problem:
When I run an ApEx application (e.g. the shipped sample application) items that use XML are not displayed correctly.
This results in two issues:
1)
Flash charts are not displayed. Instead of displaying the chart the text XML loading failed is displayed.
2)
Interactive reports generate a javascript error when I click on a column heading. The ajax-loader image is displayed, but nothing happens. Javascripterror at line 2, character 15193, Unterminated string constant.
The weird thing is that sometimes the issues are solved after a few browser refreshes (F5). Then everything works fine until the database is bounced again.
I tried to follow the link that should provide the XML for the chart
([http://nldev003/pls/apex/apex_util.flash?p=100:1:4337825341367752:FLOW_FLASH_CHART_R300851420764386117_en-us]).
This results in an empty page, source:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8"></HEAD>
<BODY></BODY></HTML>
I'm not using single sign on or reverse proxy.
All software is installed as described in the install guides.
Any ideas?
Thanks in advance.Iloon,
ApEx generates the correct host: http://nldev003/pls/apex/...
I use port 80, so no port is displayed.
I also tried to append the domain to the servername, but this changed noting.
Again the following HTML code is returned by the apex_util.flash procedure.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8"></HEAD>
<BODY></BODY></HTML>
So I do get response from the server, but it's incorrect.
There should be XML content, no HTML.
Kind regards -
Windows 8.1 SOFTWARE registry hive load failed on Windows Server 2012
Hello,
I am participated in custom Windwows Software backup/restore project development that requires load of Windows SOFTWARE/SYSTEM registry hives from target OS system drive connected to Windows system.
On all Windows version except Windows 8.1 program works correctly but when host system (on that programm run on) is Windows Server 2012 or Windows 8 and target system is Windows 8.1 registry hive load failed with following error:
Failed to load f:\Windows\System32\config\software: [1009] The configuration registry database is corrupt.
After run of 'chkdsk /r' error still remained. All requred security privileges (SE_BACKUP, SE_RESTORE) are applied. All systems are 64-bit.
Generally even system registry editor (regedit) could not open SOFTWARE hive from Windows 8.1 with following error:
Cannot Load f:\Windows\System32\config\software: Error while loading hive.
But when host system is Windows 7 or Windwos Server 2008 then SOFTWARE hive loaded without any problem.
So is there some Windows 8/8.1 registry hives validation mechanism or additional security checks tha prevents load of registry hives fromother OS instance?Sorry for later response. I was busy with other tasks.
The procMon tool shows RegLoadKey is failed when it tried to load the hive on Windows 8.1 (8.1 based WinPE also). On Windows 7, I didn't see the error (Shows Success instead of REGISTRY CORRUPT). Once the hive is load & unloaded on Windows 7 OS, the
check sum of the hive is changed, and I can load the updated hive with regedit in Windows 8.1 OS.
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\SQMClient\Windows","SUCCESS",""
"reg.exe","752","RegQueryKey","HKLM","SUCCESS","Query: HandleTags, HandleTags: 0x0"
"reg.exe","752","RegOpenKey","HKLM\Software\Microsoft\Rpc","SUCCESS","Desired Access: Query Value"
"reg.exe","752","RegQueryValue","HKLM\SOFTWARE\Microsoft\Rpc\IdleTimerWindow","NAME NOT FOUND","Length: 144"
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\Rpc","SUCCESS",""
"reg.exe","752","QueryNameInformationFile","C:\Dhoni","SUCCESS","Name: \Dhoni"
"reg.exe","752","RegQueryKeySecurity","HKLM","SUCCESS",""
"reg.exe","752","RegLoadKey","HKLM\target1","REGISTRY CORRUPT","Hive Path: C:\Dhoni\SYSTEM1" -
Procurement load fails with socket error in biapps 11.1.1.7.1
Hi friends,
While performing a procurement load via CM, my load is getting failed with one of the mapping SDE_ORA_RequisitionlinescostFact and below is the error that is occurring.
Failed child steps: SDE_ORA_REQUISITIONLINESCOSTFACT (InternalID:17404500)
ODI-1217: Session SDE_ORAR1213_ADAPTOR_SDE_ORA_REQUISITIONLINESCOSTFACT (10930500) fails with return code 17410.
ODI-1226: Step SDE_ORA_RequisitionLinesCostFact.W_RQSTN_LINE_COST_FS fails after 1 attempt(s).
ODI-1240: Flow SDE_ORA_RequisitionLinesCostFact.W_RQSTN_LINE_COST_FS fails while performing a Loading operation. This flow loads target table W_RQSTN_LINE_COST_FS.
ODI-1227: Task SrcSet0 (Loading) fails on the source ORACLE connection OLTP.
Caused By: java.sql.SQLRecoverableException: No more data to read from socket
Hence im using my Target db as 11.2.0.3.0.
What could be the exact reason behind this issue.
Thanks in advance
REgards,
SaroIt seems to be a bug with Procurement load in BIAPPS 11g, hence we need to contact OS for solving this issue.
Regards,
Saro -
Incremental load fails with the error LM_44127 Failed to prepare the task
Guys,
I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
LM_44127 Failed to prepare the task
Please help!!!i googled it..
http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
you can try for better links now.. !! -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Initial load failing between identical tables. DEFGEN skewed and fixable?
Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.
Maybe you are looking for
-
Installation problem w/ Java Run Time Environment 1.2.2
Steps to reproduce error: 1.On Windows 98 I install Java Run Time Environment 1.2.2 2.I try to launch Java Plug-in Control Panel from Windows Start menu Error message: JAVAW caused an invalid page fault in module SYMCJIT.DLL at 0167:500bf974. Registe
-
Hi, On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997'). We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but
-
I have a mac osx 10.5.8 how do i get the app store it says my updates are all complete
i have a mac desktop 27" on osx version 10.5.8. I want the new app store but when i do updates it says i am all up to date. How do i get the app store
-
I had to change my credit card on I tunes. It is saying it is rejecting my new card and that I have pending payments on the old card that did not go through. The old card was stolen so I had to cancel it. What do I do?
-
Yeah, this is my question(s). I wanted to update Adobe Indesign because of a new feature - fixed layout EPUB - but I am a bit confused. Why don't they just update the CC apps, instead of creating separate CC 2014? Would that cost more to use both