Load fails everytime if it has zero records

Hi friends,
1.Load fails everytime if it has zero records?.
how to overcome this issue.
2.HOw to Load field more than 60 chars length& how to represent in WEB Reports?
It's Very Urgent.
Thanks,
Basava Raju

<i>1.Load fails everytime if it has zero records?.
how to overcome this issue.</i>
Check this - Open up a load in RSMO - Menu - Settings - Evaluation of Requests - Set it Green - This will act global.
To make is specific  to a load - Infopackage - Scheduler - Jst look for similar option ( guess it is the penultimate one )

Similar Messages

  • ODI Data load fails everytime with different resons

    Hi All,
    We are loading data from Oracle Views to MSSQL tables using ODI 11g.
    one of the interface in our package is getting filed every time at different steps with different errors like temp space,Agent Failed, Connection closed.
    It has 15 sources (Oracle Views) which are unioned to load the target table. And One of the view takes 2 hours to query the database.
    This interface should take 4 hours approximately as per our previous loads but it is gets hang, runs for hours and then errored out.
    Can any one help me on this?

    Hi,
    What you could do is create a new procedure, then add a new command, set the technology to O/S
    Then use something like
    essmsh -D /<enterlocation>/ordclract.mxls 3416683,1342131001
    You might need to put the location of essmsh as well.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Shazam update fails everytime

    I have Nokia 5230 with 20.0.0.5 firmware, and just read in other thread that Shazam is integrated into this firmware so there is no way to remove it even by formatting, resetting or any other method.
    I wanted to remove but as above there is no real option to remove it.
    Now, when I connect my devide with Ovi Suit, everytime it says I need to update Shazam,  it then downloads the update and tries to install it and then install fails everytime.
    This has happened at least 5 time.
    So in one way I cannot remove Shazam and in another it won't update.
    It pains to see that my device is not uptodate as everytime I connect it gives me remibder to say install shazam, but then there is no real option to install or delete it.
    BTW, this is Nokia 5230 unlocked and debranded from 3 UK network.
    Any real option to deal with this problem?

    Same thing. Cant remove and can't update. This has been forever on my 5230. Pain in the butt. Would be great to either remove or get the update to work. Doesn't seem from this topic that Nokia are at all bothered though. I would imagine a significant amount of memory is used for this app and I would like it either gone or update working.
    Please wake up Nokia.
    Dave.

  • Zero Record Data Load Problem

    Hi,
    Please give your suggestion for following problem.
    we are loading data from ETL (Flat File - Data Stage) into SAP BW 3.1.
    data may contain Zero records. When we try to push the data into BW. At ETL side, it is showing successful data transfer. At, BW side it is showing "Processing state" (Yellow light). and all BW resources are hang-up.
    When we try to send another data load from ETL side, We could not push the data as BW resources are hang up by the previous process.
    Whenever we are getting this kind of problem, we are killing the process and continuing with another data Re-load. But this is not a permanent solution. This is happening more often.
    What is the solution for this problem?
    One of my colleague suggested following suggestion. Shall I consider this one?
    Summary:  when loading with empty files, data may be in the processing state in BW 
    Details:  When user load with empty file(must be empty, can not have any line returns, user can check the data file in binary mode), data is loaded into BW with 0 records. BW will show be in yellow state(processing state) with 0 record showing, and in the PSA inside BW, 1 datapacket will show there with nothing inside. Depends on how user configured their system, BW server can either accept the 0 record packet or deny it. When BW server is configured to accept it, this load request will change to green state(finished state). When the BW server is configured to deny it, this load request will be in the yellow state.
    Please give me ur suggestions.
    Thanks in advance.
    Regards,
    VPR

    hi VPR,
    have you tried to set the light 'judge'ment
    go to monitor of one request and menu settings->evaluation of requests(traffic light), in next screen 'evaluation of requests', 'if no data is avaible in the system, the request' -> choose option 'is judged to be successful' (green).
    Set delta load to complete when no delta data
    hope this helps.

  • Everytime I try and load Itunes it says it has stopped working

    Everytime I try and load Itunes it says it has stopped working and when I click on the message it closes the whole program down.  I have tried the trouble shoot compatability but it just says incompatible application detected.  I am not very tecnical but have tried to uninstall the programs and re install them but with no luck.  This problem started after I added a new album but I have now removed it from the computer.  Help!

    Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
    http://www.apple.com/itunes/download/
    Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
    Does that go through any better for you?

  • While loading master data to infoobject Load failed due to Duplicate record

    Hi Experts,
    While loading master data to the infoobject load failed .
    The error it is showing is 24 Duplicate record found. 23 recordings used in table.
    Pls help me to solve this issue
    Thanks in Advance.
    Regards,
    Gopal.

    In infopackage settings u will find a checkbox for 'delete duplicate records'.
    I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
    This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
    Use this and reload master data.
    cheers,
    Vishvesh

  • Data Load Fails due to duplicate records from the PSA

    Hi,
    I have loaded the Master Data Twice in to the PSA.  Then, I created the DTP to load the data from the PSA to the InfoProvider.  The data load is failing with an error "duplicate key/records found".
    Is there any setting that I can configure by which even though I have duplicate records in PSA, I can be successfully able to load only one set of data (without duplicates) in to the InfoProvider?
    How can I set up the process chains to do so?
    Your answer to the above two questions is appreciated.
    Thanks,

    Hi Sesh,
    There are 2 places where the DTP checks for duplicates.
    In the first, it checks previous error stacks. If the records you are loading are still contained in the error stack of a previous DTP run, it will throw the error at this stage. In this case you will first have to clean up the previous error stack.
    The second stage will clean up duplicates  across datapackeages, provided the option is set in your datasource. But you should note that this will not solve the problem if you have duplicates in the same datapackage. In that case you can do the filtering yourself in the start routine of your transformation.
    Hope this helps,
    Pieter

  • ODS to CUbe Zero Record Load

    Hi,
    A daily load from ODS to Cube is scheduled but the source may or may not have records. so every time the source hass zero records the load happens till the ODS and the status for the ODS remains yellow.
    I manually change it to green and activate the request so that the process continues. Is there a way to automate this so that eventhough there are zero records in the load the ODS is activated.
    Help would be appreciated

    Hi
    You can do this.
    RSMO>select your request>settings>Evaluation of requests(traffic lights)>
    IF no data is available in the system the request-->select the radio button.Status Successful..
    Hope it helps
    Thanks
    Teja

  • Zero records added after dataload from texttable of 1 infoobject to another

    Hello,
    We are working on BI 7.0 (2004S)  but we still use BW 3.5 data flow.
    We have a requirement to load text data from one infoobject (0material) to another infoobject (0rt_confmat). The actual requirement was - Text table of  0material (/BI0/TMATERIAL) should  be added  to info-object 0RT_CONFMAT text table.)
    0rt_confmat is a navigational  attribute of 0material.
    I did the following steps to load this data using 2 methods. The data loads using both these methods are successful but zero records are added to the text table of 0rt_confmat.
    Method 1 :
    1. Text table of  0material (/BI0/TMATERIAL) cannot be added directly to info-object 0RT_CONFMAT text table.
    So a datasource ZTXTMATERIAL was created with text table  /BI0/TMATERIAL.
    2. Infosource, transfer rules and update rules were created. Changes were made to
    the info-object 0RT_CONFMAT to include its own text table according to the specifications given.
    Method 2:
    1.  created an export datasource for 0material and did the necessary steps such as replicating data source, creating infosource, update rules and transfer rules and infopackage.
    The problem is that the number of transferred records  is 16089 but 0 records are added to the text table of 0RT_CONFMAT.
    Records from text table are not getting loaded from
    I have searched sdn and sap notes but was unable to find a solution for this issue.
    Is it not possible to load data from the text table of a characteristic infoobject to the text table of its navigational attribute ?
    Please suggest a solution for this issue.
    Thanks and Regards,
    Radhika

    Hi All,
    Please refer below for replies to your questions
    Now I was to suggest the second approach:
    1. What have you set into the transfer structure, did you map 0rt_confmat with 0rd_confmat? -  I mapped it with 0material
    2. Do you see text elements in the transfer structure? -yes the text elements exist in the transfer structure
    3. As 0rt_confmat is an attribute of 0material, there is a possibility that for multiple material you may have same 0rt_confmat. In that case, your load may fail saying duplicate records.  - The data load is successful, but records are not added to the target.
    4. What is the data type for 0rf_confmat and 0material in your system? - Both are character strings
    On what basis are you loading the text from 0material to 0rt_confmat. -the key field 0material is mapped to 0rt_confmat
    Your problem seems to be the update rules / transfer rules from 0MATERIAL text table to 0RT_CONFMAT, that's why in your second method you have transfered values, but none were added.
    Remember that you have to have a key for 0RT_CONFMAT and the text for that key mapped through transfer rules, and I beleive that 0MATERIAL text table doesn't have the key for 0RT_CONFMAT, but has the key for 0MATERIAL. If you want both keys to be the same, then in your transfer rules map 0MATERIAL to 0RT_CONFMAT, and the text from 0MATERIAL to the text for 0RT_CONFMAT.
    Is that what you've done? - Yes, in the update rules 0material is mapped to 0rt_confmat and the text from 0material is mapped to text from 0rt_confmat. After reading your reply I mapped 0MATERIAL to 0RT_CONFMAT  it in the transfer rules as well, but still zero records are added.
    The data load is successful using both methods , but records are not getting added.
    Can you chk in RSA3 if the data is extracted for the datasoruce ZTXTMATERIAL?? - Yes, data gets extracted.
    ALso while you loaded the data, did you get the data in the PSA? - Yes data is seen in the PSA.
    Please suggest how I can proceed now.
    Thanks and Regards,
    Radhika

  • Query returns zero records in coldfusion context, but works fine in Navicat

    I've got a query that's returning zero records when I load a page.  If I copy and paste that same query (from the debug output) into navicat, I get rows returned (as I expect).  Has anyone seen this?  It happens locally (CF9) AND remotely on our staging server (CF10).  Even weirder, it's a query that was previously working fine - I simply added an if statement to the where clause, and all of a sudden... 
    Here's the query:
            <CFQUERY name="LOCAL.getEncounterServices" datasource="#REQUEST.dsn#"> 
            SELECT
                a.EncounterProductID,
                a.DateTime AS ServiceDate,
                aa.CartItemID,
                aaa.CartID,
                aaaaa.CartStatus,
                b.ProductID,
                b.ProductName,
                b.CPTCode,
                b.Price,
                c.EncounterID,
                c.DateTimeClosed AS EncounterClosedDate,
                d.FirstName,
                d.LastName
            FROM
                EncounterProducts a
                    LEFT JOIN CartItemProduct aa ON (a.EncounterProductID = aa.EncounterProductID AND aa.Active = 1)
                    LEFT JOIN CartItem aaa ON (aa.CartItemID = aaa.CartItemID)
                    LEFT JOIN Cart aaaa ON (aaa.CartID = aaaa.CartID)
                    LEFT JOIN CartStatus aaaaa ON (aaaa.CartStatusID = aaaaa.CartStatusID),
                Product b,
                Encounters c,
                Contacts d,
                EncounterStatuses e
            WHERE
                1 = 1
                AND (aa.CartItemID IS NULL OR aaaaa.CartStatus = 'Deleted')
                AND a.Active = 1
                AND a.ProductID = b.ProductID
                AND a.EncounterID = c.EncounterID
                AND c.PatientID = d.ContactID
                AND c.EncounterStatusID = e.EncounterStatusID
                AND e.EncounterStatus = 'Closed'
              <CFIF IsDefined("ARGUMENTS.encounter") AND IsObject(ARGUMENTS.encounter)>
                     AND c.EncounterID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.encounter.getID()#">
             <CFELSE>
                    AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
                    AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
               </CFIF>
                AND c.LocationID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.locationID#">
                AND c.CustomerID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.customerID#">
            </CFQUERY>
    All of this worked just fine before I added the lines:
             <CFIF IsDefined("ARGUMENTS.encounter") AND IsObject(ARGUMENTS.encounter)>
                     AND c.EncounterID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.encounter.getID()#">
             <CFELSE>
                    AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
                    AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
              </CFIF>
    Previously, it had just been:
                    AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
                    AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
    With no IF/ELSE statement.
    Anyone seen anything like this before?  Any ideas? 
    Thanks.

    Right, I'll start disabusing myself of the DateFormat!
    I'm sorry, I should've posted the actual query too.  It's inserting the first part - "AND c.EncounterID = ....."
    Here's the full query:
    LOCAL.getEncounterServices (Datasource=xmddevdb, Time=9ms, Records=0) in /Applications/ColdFusion9/wwwroot/XMD_NEW/xmd_dev/cfc/ShoppingGateway.cfc @ 16:56:28.028
    SELECT
                a.EncounterProductID,
                a.DateTime AS ServiceDate,
                aa.CartItemID,
                aaa.CartID,
                aaaaa.CartStatus,
                b.ProductID,
                b.ProductName,
                b.CPTCode,
                b.Price,
                c.EncounterID,
                c.DateTimeClosed AS EncounterClosedDate,
                d.FirstName,
                d.LastName
            FROM
                EncounterProducts a
                    LEFT JOIN CartItemProduct aa ON (a.EncounterProductID = aa.EncounterProductID AND aa.Active = 1)
                    LEFT JOIN CartItem aaa ON (aa.CartItemID = aaa.CartItemID)
                    LEFT JOIN Cart aaaa ON (aaa.CartID = aaaa.CartID)
                    LEFT JOIN CartStatus aaaaa ON (aaaa.CartStatusID = aaaaa.CartStatusID),
                Product b,
                Encounters c,
                Contacts d,
                EncounterStatuses e
            WHERE
                1 = 1
                AND (aa.CartItemID IS NULL OR aaaaa.CartStatus = 'Deleted')
                AND a.Active = 1
                AND a.ProductID = b.ProductID
                AND a.EncounterID = c.EncounterID
                AND c.PatientID = d.ContactID
                AND c.EncounterStatusID = e.EncounterStatusID
                AND e.EncounterStatus = 'Closed'
                     AND c.EncounterID = ?
                AND c.LocationID = ?
                AND c.CustomerID = ?
    Query Parameter Value(s) -
    Parameter #1(cf_sql_integer) = 28
    Parameter #2(cf_sql_integer) = 16
    Parameter #3(cf_sql_integer) = 6
    Thansk again for the help!

  • Material Master Data load failed

    Hi All,
    I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
    But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
    Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
    Best Regards,
    Nene.

    hi Nene/Sankar,
    for material text no language please check Note 546346 - Material texts: no selection on languages
    and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
    hope this helps.
    Note 546346 - Material texts: no selection on languages
    Summary
    Symptom
    When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
    Other terms
    DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
    Reason and Prerequisites
    As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
    Solution
    As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
    Import
    Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
    Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
    Support Package 3 for PI 2002_1_470
    In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
    Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
    Note 561880 - Requests hang because IDocs are not processed
    Symptom
    Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
    After a timeout, the request status finally switches to 'Red'.
    Information IDocs with the status '64' are displayed in the 'Detail' tab.
    Other terms
    IDoc, tRFC, ALE, status 64
    Reason and Prerequisites
    Status information on load requests is transferred in the form of IDocs.
    IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
    IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
    If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
    The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
    Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
    You must therefore analyze the status text.
    Solution
    We recommend asynchronous processing for Business Warehouse.
    To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
    The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
    Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
    The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
    1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
       TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
    2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
    3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
    However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
       TIP: Also check transaction SM58 for problematic tRFC entries.
    IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

  • Master data load failed

    Hi Experts,
    One of my master data full load failed, see the below erro message in status tab,
    Incorrect data records - error requests (total status RED)
    Diagnosis
    Data records were recognized as incorrect.
    System response
    The valid records were updated in the data target.
    The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
    The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
    Procedure
    Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
    can any one please give me solution.
    Thanks
    David

    HI,
    I am loading the data from application server,  i dont have R/3 for this load. and the below message is showing in status tab;
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    Thanks
    David

  • Initialization with zero records

    Hi BW Folks,
    I have scheduled initialization to ODS object, Ran successfully but zero records.
    After that tried to do delta the package got failed with out any proper error message. i can see only error message " Start InfoPackage XXXXX "
    if i go to infopackage manually its showing message saying that " There is no active delta Initialization for this IS/QS/DATA source"
    Have checked in R3 - extract checker could see only Zero records.
    Can you please help me in this! Thanks in Advance.
    Regards,
    --Nani.

    Hi,
    Thats the reason for why you are not able to do the delta loads. This request should be there in the <i>Schedular</i> as the prerequisite to do the delta loads.It does not matter  even you have that request in the data target if there is no delta init info at infopackage.
    So you need to do delta init one more tmie. So delete teh data from data targets. And do the delta init .
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Getting zero records while extracting data from R/3

    Hi friends,
    I have a cube to which data was getting loaded earlier in qulaity system. But i came acorss some issues with the loads. The issues were that everytime  a load was run it was extracted with Init with some selection, i was wondering why did they do Init instead of repair full . After doing some investigation i came to know that this data source is not supporting Init without data transfer, so i think thats why they have done Init.
    I have deleted the requests from the cube until the point where there were incorrect loads and started to do Init again from 10.01.2010 to 31.12.9999. When i run the RSA3 i can see about 65,000 records but when i run the Init or full Load i am getting zero records. Not able to load the data can anyone please tell me where am i going wrong?
    I am using data source 0UC_SALES_STATS_02 (IS-U datasource).
    Thanks in advance.
    Regards
    BN

    Hi prashant,
    Thanks a lot for your quick reply. But there is no Init flag available, becuase it was already deleted.
    If it was existing then the system would popup a message saying that there is a init already existing and proposing me to delete it ,and it will not allow me to run the Load without deleteing the flag.
    So, the issue is not with the Init flag.
    Regards
    BN

  • Zero records in Delta Queue for Non-LO Datasource

    Hi,
    I have a process chain which loads data daily and last loaded on 5th of this month which is a delta load to DSO, and then I have triggered process chain on 10th  and now the process chain got successful but delta is returning zero records. I have gone through the Delta queue monitor, in that the data source is showing 0. what could be the reason for this? The data source is a Generic data source built on View and it is not a LO data source and delta is on timestamp.
    Thanks,
    Karan.

    Hi lokesh.
    Repair Full delta option it wont distub existing deltas.....
    repair full delta put full update indicate request as repair request.
    Via the Scheduler menu we can indicate a request with full-update mode as Repair Full Request. This request can be updated into every data target even if the data target already contains data from an initialization run or delta for this Data Source/ source system combination, and has overlapping selection criteria.

Maybe you are looking for