Load fails while running a Process Chain even before loading to the PSA.

Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo

Similar Messages

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

Error while running FICO process chain

Hi Experts,
While monitoring the FICO related process chain.I got an error due to which the loading of the process chain stoped.
The Error occured at DTP level and the displayed error messages are like this
Aggregation Behaviour of InfoObjects Couldnot be read()
Operation Could not be carried out for
Exception xxxxxxxxxx locked.
Can any one help me out of how to fix this problem
Waiting for reply
Thanks.
Regards,
Mohan

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

Pointers for optimizing system performance (run time) while running DP process chain with parallel processing

Hi Experts,
We are running APO DP process chain with parallel processing in our company, we are experiencing some issues regarding run time of process chain, need your help on below points;
- What are the ways we can optimize process chain run time.
- Special points we need to take care of in case of parallel processing profiles used in process chain.
- Any specific sequence to be followed for different processes in process chain - if there is some best practice followed.
- Any notes suggesting ways to improve system performance for APO version 7 with different enhancement packs 1 and 2.
Any help will be really appreciated.
Regards

HI Neelesh,
There are many ways to optimize performance of the process chains (background jobs) in APO system.
Firstly I would recommend you to identify the pain areas (steps) which are completing with more runtimes. Then each one of the step has got different approaches to decrease the runtime.
Like you may end up with steps like infopackage executions, DTPs, DP mass processing jobs etc which might be running with more runtimes. So now target each one of them differently and find out the ways to optimize. At the same time the approach you follow should be technically possible with basis perspective (system load and utilization) as well.
And coming to parallel processing, you can use parallel processing for different for different jobs. You can further r explore on the same using parallel processing. Like loading an infocube, mass processing, infopackage execution, DTP, TSCOPY etc.
Check the below link for more info
Performance problems in DP mass processing
Let me know if you require further info.
Regards,
Raj

Error encountered while running a process chain

Hi,
Was wondering what's the cause of this error:
Invalid call sequence to interfaces when recording changes.
We keep on getting this error message when we try to activate and schedule our process chain.
Please help. Thanks!

We run into this problem every time we Activate/Schedule a Process Chain; doesn't really affect anything. The chain still runs as scheduled once you "OK" through the error messages.
Seems to be some rogue message that comes up in more Authorization-sensitive environments (Read: PRD)
I have researched this to fruitless extents: no Notes exist, etc.
Sorry I can't be of more help other than to say "I feel your pain" :-D

How to run change run in process chain when it fails

HI All,
How to run attribute change run in process chain when it fails. Give me the procedure with clear description. Is there is any difference with 3.x versions in running this.
Thanks,
Pratap Reddy

Hi Pratap.
If BI Accelerator is not being implemented by ur company, in that case if change run fails u'll proceed by 'Repeat' process option as usual we do in 3.x.
If BIA is exists, in this scenario u can not repeat as we do in 3.x. U have to drop the indexes on cubes effecting that change run and run the change runs. Once it is finished recreate BIA Indexes on cubes.
Warm Regards,
Ramki

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Applying variable filter while executing a process chain

Hi,
I have a client requirement discussed below:
I have a process chain containing multiple DTPs. The user wants to have a filter variable for fiscal year period while executing the process chain(i.e fiscal period selection screen should come for him to enter fiscal period). And the entire process chain should run for that selected fiscal period.
Please help me with solutions of this dynamic process chain triggering.
Points will be assigned if helpful.
Regards,
Sourabh

Hi,
You can craete a variant with some set of value and through ABAP code you
can run the process chain according to your requirement.
Thanks,
Saveen Kumar

ABAP PROGRAM to run a process chain

Hello all,
What is the ABAP program to run a process chain after a step that has failed but is manually corrected?
In short a std ABAP program to run a pc.
Regards,
NIKEKAB

Hi.
Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
Regards.

Problem in Activating Hierarchy Attribute change run through process chain.

Hi All,
I have the problem in Hierarchy change run processw running through process chain..and also process chain completes successfully without any error..
Even hierarchy change run completes successfully the hierarchy objects are not activating,
so daily when i have to activate hierarchy objects manually..
and what i did was in one attributechange run process i have included 10 hierarchy object is it correct or else i have to separatly create 10 attribute change hierachy proceess in the process chain.. pls through some lights on this issue
With regards,
Hari

Hi venkat,
Yes.. i already include the save hierarchies process in process chain...
my main problem is hierarchy infobject are not activating using process chain and also even process chain is not giving error message.. and in which log table the hierarchy objects are maintained (such as run time, date , status etc..).
IS there is any other settings to be made in process chain..
with regards,
hari

Process chain for full load.

Hi,
I have developed a Process chain for delta loads. Now my question is, can we use process chain to load full load data source for master data, if yeas then what are the steps.
If we can use process chain for full load to master data then can we use delta and full load infopackages in the process chain.
Please update.

Hi Sata,
You can Include both Full and Delta in the Process Chain. But make sure that you execute the Init InfoPackage manually before executing the delta InfoPackage in the Process Chain.
For Full Load Process chain, add the infopackage
>DTP for Full Load---->delete PSA data variant(after 2days) -
>attribute change run
Normally load the hierarchy first then the attribute and text.
Assign points if it helped you.
Regards,
Senoy

What is Attribute change run in process chain

Hi Everyone,
Can anyone please give some information regarding "Attribute Change Run" in process chain. And how it is useful ?

Hi Aditya,
You need to schedule an attribute change run when you change master data attributes or hierarchies that are used as navigational attributes or in aggregates. There is a simple test to check if you need an aggregate change run. Load your attributes and look into the master data table (directly via SE16). If you only have entries with OBJVERS = 'A' (active) then you don't need a change run. If you have entries with OBJVERS = 'I' then you need to schedule a change run after upload.
Look at these previous threads
Re: When to use Attribute change Run
Re: Attribute Change Run
Regards,
R.Ravi

Script to Run a Process Chain

Hi,
Is there any way to run a Process Chain using Script logic or BADI?
Regards,
G.Vijaya Kumar

Yes ,it has to call a process chain ,without which your logic would not get executed.
Itz the case, even with BPC provided FX trans logic. There will be a back end process chain to execute FX trans.
Basically ,process chain just acts a facilitator to run your logic in the BI space
Almost all PCs are similar with a structutre as shown below
start -> run logic -> end.
Now what logic is run on the second step depends on which .lgf file you are running at the front end.
Check out in txn RSPC > BPC : system for more understanding
Thanks
-sridhar

Schedule options while transporting in Process chains

I have created a Process Chain which is scheduled for Immediate processing.
I have to transport the Process Chain to Production System, where the process chain should run Daily. So should I change the schedule options before transporting or should the schedule options be changed in Production system.
Will the schedule options also be transported to target system while transporting?

Hi,
I have to transport the Process Chain to Production System, where the process chain should run Daily. So should I change the schedule options before transporting or should the schedule options be changed in Production system.
After importing into Production, it will not be triggered automatically. We need to exexute it in production manually.
We have option to change the System settings ,to change the Process chain in Production.So that we can change the schedule options as per our requirements directly in Production. This setting is there in Trasnport connector screen.And this needs to be done in Production.
Regards,
Anil Kumar Sharma .P

Application express installation is failed while running apxdevrm.sql scrip

Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PM

Hello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan

Load fails while running a Process Chain even before loading to the PSA.

Similar Messages

Maybe you are looking for