Load Failure for Master Data object

Dear Sdns,
                    Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
Aluri

Hi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu

Similar Messages

Multiple datasource for Master data object

I need to enhance Customer master data with few attributes.
can i have a ztable with the fields needed and can i link this via a generic datasource to Customer master data ?
Can a master info objecte get data from more than one data sources?

hi,
in case the additional attributes are based on certain conditional fields present in another datasource then both datasources can be used .The data can be brought to respective write optimized DSOs and then linked through suitable routine.
Edited by: dpabaskar on Mar 14, 2011 10:38 AM

Data load error for master data

hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1

Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps

BW - Delta for Master data not loading

Hello All,
I am not able to load delta for master data of vendor and material.
The initial load works fine but when I load delta it gives an error
" The extraction program does not support object 0vendor"
" ALE change pointers are not set up correctly"
Do i need to activate the change pointer in BD61. I was not sure so checking up with all experts.
Regards
Vanya

Hi Ravi,
We faced the same problem as you for 0MATERIAL_ATTR and we solved it by the following steps,
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
We have have got resolved by doing these steps and it may help for your problem as well.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

Loads to Master data object

If I have created selection packages to load to a master data object for example:
1. Load to 0MAT_PLANT
2. Five packages created filtered by plant range
If I kick off the first package do I need this load to finish before the second package can load into the object i.e. 0MAT_PLANT is locked by the first package or can I load packages in parallel to a master data object? If so how? Thanks

Thanks for that, have carried that out. I have observed the following would be grateful if someone could confirm
1. Have a package running 2+ million lines
2. Kick off a package with a few hundred thousand lines after the first package, will complete before first package
3. Get an error since the extract completes in R3. However cannot load to the object since it is locked by the first
4. Message below:
User BWR3REMOTE is preventing you from loading master data for
characteristic 0MAT_PLANT . The lock was set by the master data loading
process with the request number (DataPackage number)
REQU_46MIUD73IBHYLLD9KZCAX4P47(000226) on 20070729,171630(711753) .

Master Data Governance & Implementation of SAP Master Data Objects

I would like to get hold of a case study on Master Data Strategy Governance Framework and Implementation of governance processes for Master Data Objects acrosss all SAP Modules. Governance processes do not have to use SAP MDM for master data management.
If any one in SAP community has implemented Master data governance, I would like to benefit from their experience and hence the request

Hello,
Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
You may refer the SAP Provided PDF and presentations, to build your Business Case.
[SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
Regards,
Abhishek

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

Master data object - Available for reporting related

Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
Hari

Hi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
Infoobject - Attribute,
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran

Loading to Master data object

A master data object is loaded on a daily basis from R3 (Full Load). In the past there have been loads to the same object via flat files.
A full load from R3 does not overwrite records which are not part of R3 but part of a flat file load, is that correct? Thanks

Just to add (even though it is answerd )
If you had the zero-fill property set in OMSL(?) for material no, these two would values have been treated as one (with zeroes filled on the left). Check table value for field TMCNV-FLAG0 (this should be set to 'X' to have the numeric values zero-filled automatically).
Caution : once this setting is done and materials loaded, it shall never be changed.

Turning off the text for a master data object

What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks

Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar

How to do Stastical Setup for Master data Loading

Hi All
Thanks a lot for all guys,who are helping me a lot.
I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
But what is the procedure for MAster data in SBIW-Tcode.
Regards
Balaji

Hi,
Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?
Actually this will decrease the time of transaction data loading .So it improves the loading performance , not reporting performance.
Now I got a doubt from where this Master Data is been loading? and how to load this data.
2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
For example 0materail is the Master characterstic.
And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
0MATERIAL_ATTR
0MATERIAL_LGEN_HIER
0MATERIAL_LKLS_HIER
0MATERIAL_TEXT
With rgds,
Anil Kumar Sharma .P

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Loading from ODS to Master data Object

Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishna

Hi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh

Is there settng source system level for master data delta loading perfo

Hi Viwers,
Good Morning,
I am loading data from the source to target level for Master data it is taking too much time,I would like to know the how to increase the master data delta loading performance.
I would like to know the source system level is there any setting requited & target system level also.
Please give your inputs..........
Thanks & Regards,
Venkat Vanarasi.

Venkat -
Are u deleting the indexes of data target before delta loading ? If not,delete the indexes of data target before delta loading and recreate them after delta loading is done.This procedure increase load performance.You can perform whole procedure in process chain.
Anesh B

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
Allot points if my post helps!!
Best regards,
Vikash.

Load Failure for Master Data object

Similar Messages

Maybe you are looking for