Load Failures extracting from R/3 System. Failures in R/3.

Hi,
The BW job starts the R/3 job and this R/3 job keep failing with the dump.TSV_TNEW_PAGE_ALLOC_FAILED.
the job is currently running with package size = 2.000 records.
Thanks & regards,
Anita

Hi Anita,
This error msg has nothing to do with the Hard Disk space. So, it doesn't matter if you are loading thru PSA or directly into Target. Please check the OSS notes suggested and check if you are using any Huge Internal tables.
Also, in the Shortdump you will get infomation abt the Source Code where it failed. It might give you information abt the Internal Tables that are used, if in case the dump occurred in the custom code.
Regards,
Sree

Similar Messages

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

How to load text data from multiple source systems.

Hello Gurus,
I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
Please gimme some inputs to proceed.
Thanks in advance
Peter

Hi,
I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
so try to load simply:
material key, text, lang (optional)
Hope it helps.

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Data Extraction from Third party system to BW System issues...

Hi Experts,
I would like to know about data extraction issues from third party systems like hyperion or DB2 or Sysbase to BW system, proper procedure to minimise risk facors, etc.
I hope hear from you soon...
Thanks in advance....
Regards,
Nagendra KReddy

Hi,
Below is a document for DB connect. in that frequent problems also mentioned.
Create DataSource for DB Connect step by step
-Sriram

Problem loading modified classes from CLASSPATH using system class loader

Hi,
I am facing problem to load the modified classes from CLASSPATH.
I have set my CLASSPATH to a directory whose classes will be modified frequently. After the server(web/app) is started, the system class loader, using which am trying to load the classes from the directory where the CLASSPATH is set, am not able to load the modified files without the server restart.
Do I need to have a custom class loader to fix this.
Please help me.
Thanks,
Sureddy

Do I need to have a custom class loader to fix this.Yes.

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Article Master Data Extraction from IS-Retail System

Hi,
I have one IS-Retail System with me. I want to extract Article Master data from IS-Retail System.
Is there any specific procedure to do this? If yes, can anybody tell me the procedure?
Waiting for your response...
Cheers,
Yash K

Hi Yash,
you can use transaction BD10 to extract articles. Note that you should change to message type "ARTMAS" instead of "MATMAS".
Best regards
Michael

Time Restrictions for BW Extractions from R/3 System ??

My requirement is Our Production is Server is badly overloaded & i want to restrict BW System extractions only in morning between 2.30 AM to 5.30 AM.
As BW is a sepearate team, for their different requirements they use to extract the data even in morning times also (as they feel it is urgent to them ) as they some times do not understand the slow performance is being reported by hundreds of people if it performs even for few miniutes.
I want to secure / all any RFC connection from BW system to R/3 system only in morning times @2.30AM to 5.30AM.
How can i acheive this to have complete contol on the R/3 System performance.
Rgds
PR

Mike Thanks for your idea !!
But i thought can we do some thing with secinfo file
As given idea - i implemented & i acheived my requirement.
I also paste the code i used for the program which may be useful for our friends
=========================================================
*& Report ZBC_USER_LOCK_UNLOCK
REPORT ZBC_USER_LOCK_UNLOCK.
tables:usr02.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
parameters : p_bname like usr02-bname,
p_UFLAG like usr02-UFLAG.
SELECTION-SCREEN END OF BLOCK b1.
select single * from usr02 where bname = p_bname.
if sy-subrc = 0.
usr02-uflag = p_uflag.
endif.
modify usr02." where bname = p_bname transporting uflag.
=========================================================
Infact - i don't know ABAP - so above small program also seems to be good & pasted here.
Rgds
PR

ODI and Loading to/Extracting from Hyperion Planning **?

All,
first--I am not a Hyperion expert.
Clients have 2 requirements:
#1. Loading data ( flat file format residing in Windows environment) ''to'' Hyperion Planning 9.3.1
#2. Extracting Data 'From' Hyperion Planning 9.3.1 to a flat file ( residing in Windows environment)
Questions:
#1 I have looked at materials at OBE > ( http://ias.us.oracle.com/portal/page?_pageid=33,1704614&_dad=portal&_schema=PORTAL)
I have been able to reverse engineer a Hyperion application in ODI. but apparently that's not all, and there is additional work to be done in Hyperion itself
namely---'preparing' dimensional members, before loading any data.
Let's say the input data is comprised of: Product_code, Account_num, Period, Amount
Can someone explain how the following recommended steps by Hyperion example can plays out to load this data?
1) Loading Metadata? ( what needs to be added/changed in Hyperion diemnsion)
2) Loading Data?
#2 do we have to use ODI to create interface and extract/write data from Hyperion to a flat file? isn't there any Hyperion 'Facility' which does that?
any pointers is appreciated.
Thanks
ali

Hello,
Unfortunately there is no SSO option from "Planning to FDM" via Tasks.
The URL you should tell Planning to launch in a new window is 'http://<ServerName>/HyperionFDM'
If Planning can not execute that in a fresh IE window; then there isn't much that can be done.
It might also be advantageous to post this to the Planning group as well; since this isn't necessarily an FDM discussion.
Thank you,

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Master data load from 2 source system

Hi all,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding
attribute. Because all the objects which i want to use compunding attribute are reference
objects for lot of other info objects. So, i dont want to change the business content
objects structure. Please guide me
Thanks

Hi,
I cube there is nothing to do with compounding attribute, it will be handled in MD IO level. As your requirement to separate the transaction happen in different source system then make add another info object as Zsource and make it as nav. attribute then design your report based on nav. attribute.
Note that this separation is only possible in Material Related transaction not for others.
Thanks
BVR

How to load an infocube from more than one source system?

HI all,
Can u please tell me how to load an info cube from more than one source sytem?

Hi,
same confiig is required for one or more source system. (From Data source to update rule, obviously cube remains the same).
Its the infopackage execution which loads the data from different source system.
Regards,
Nawanit

Loading uploaded Extracts

I understand that we can load the extracts from local desktop file systems and use them for loading into the destination tables.
Questions:
1.Is the file format always Zip file?
2.What should be the content of zip file? Areselection set xml and prevalidator xml files must?
3. If I have to leverage iSetup for custom uploads, how can I define the selection sets? Is it is just insert into the the base tables using the database packages?
Basically trying to use this load information from desktop into the tables in the local instance itself? Is it feasible?
Thanks
Nagamohan

Dear,
You can upload your own created / modified iSetup Data through iSetup Extract & Load option. Following Data files are required to UPload extract data into Target instance
#1. Driver.xml file must contaned with list of all XML api's being used, formatted in XML tag
#2. Selection Set .Xml file mentains all selection set name along with their sequences and occurance during Load.
#3. Validator XML file is standard XML validation file for varify the XML version and standard validation. We can use same file.
#4. Apart from above all set of files now you can place your own customized or modified iSetup XML data file, actully this file containts DATA to be loaded into Target instance.
***** Thanks n Regards

I have hierarchy data in R/3 side how will i load that data from R/3 to BW

Hi all,
i have my hierarchy data in the R/3 side how will i load that data from R/3 to BW side
Regard
Kiran Kumar

Hi Kiran,
Here is the procedure:
1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
Specify if the hierarchy should be automatically activated after loading or be marked for activation.
Select an update method (Full Update, Insert Subtree, Update Subtree).
If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
10.      Maintain the tab page: processing.
11.      Maintain the tab page: updating.
12.      To schedule the InfoPackage, you have the following options:
○       (Manually) in the scheduler, see Scheduling InfoPackages
○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
For more info visit this help pages on SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
Cheers,
Habeeb

Load Failures extracting from R/3 System. Failures in R/3.

Similar Messages

Maybe you are looking for