Load from cube on one system to same cube on other system

If i have the same cube on two different BW systems, how can i load data from one cube to the other ?
thanks

First thing is you have to create a export data source. Right click on the cube and choose "Generate Export Datasource" in additional functions of context menu. It will generate a datasource prefixed by 8. like: 8ZTESTCUBE
Then come to another source system where you want to load the data. In rsa1 --> Source system --> choose your source system ---> Replicate --> You will get your data source you generated here.
Now create a transformation, do mapping, activate and create a DTP. Load the data.
Pravender

Similar Messages

  • Can data be loaded from Cube to DSO

    Can data be loaded from Cube to DSO

    Hello,
    Yes,it can be loaded...all you need to do is the follow the same procedure of source and target as you do with the normal flow,...there is no different with cube as data source...you can even schedule delta from the cube to the DSO.
    Thanks
    Ajeet

  • Can a master data will have loading from more than one data source

    Dear gurus,
          I have a master data object which has every day loading from one particular data source. Now I got a requirement to load data from another data source. If we load data from more than one data source , will there be any problem with data? Will it accept loading from more than one data source.?
    Regards
    Rs

    Hi Ram,
    We can load the data to target morethan one datasource.Thats advantage in BI compare to BW. It will accept loading from more than one datasource.but you have to take care about characteristic and attributes are the same in both datasources like that.
    Regards,
    SVS

  • Posting of Trip Document from HR(in one system) to FI(in other system).

    Hello Experts,
    I have a question how to Post Trip Document from HR(in one system) to FI(in other system)? This is to be done via ALE/IDOC , i.e when creating posting run in HR, an IDOC should be triggered which will post trip document in FI in other system...
    How is it possible?? is their another alternative?? I am  a SAP ABAP guy is it my whole responsibility to handle this required,
    Thanks
    Puneet

    Hi Yogesh,
    I'm not sure about tr of data from FICA to FI-GL corporate. But in one of my earlier project we have tr data from FICA to FI-GL and then from FI-GL to Corp GL using customized iDoc structure ACC_DOCUMENT01.
    You can look into WE30 for standard iDoc structures that would suit your requirement.
    Hope this helps.
    Rgds
    Rajendra

  • Load from cube to planning area

    Hi,
    We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
    Scenario is like this.
    For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero  (but it was blank) and on D1 Zero and on D2 as 2 in cube.
    I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
    I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
    Can any one put some light and help me out from this issue.
    With regards,
    Sreerama

    Hi Seerama,
    I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
    In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
    When you load the data, you should indeed not flag "ignore zero value"
    If the issue you have is in your cube (between the file and the cube) then it is another matter...
    Kind Regards,
    Julien

  • Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

    XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

    I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
    Two points, Steve:
    1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
    2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
    Do you have any idea what to do to solve the problem?
    Regards

  • DTP - Load from cube to cube - Setting "Use aggregates"

    Hi all,
    what exactly does the setting "Use aggregates" on the extraction tab in a DTP which loads data from Cube to Cube mean? The F1-Help didn't really bring me any further...
    Thanks to any answers in advance!
    Kind regards,
    Philipp

    Hi,
    U can update data from from one data target to other data target through data marting.
    right click ur ODS or Cube from where u r updating data to other target and select the Generate export data source. then it will create a data source with the name 8forllowed by ur data taget name. there after assign ur data source to ur infosource. and then create Update b/n the targets and then select the update data to other data target from where u r updating.
    select the type of update. and then load it from ur IP.
    regards-
    MM

  • Error is data loading from 3rd party source system with DBCONNECT

    Hi,
    We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
    After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
    The connection is working OK and we can see the tables in the source system. But we cannot load the data.
    The error in the monitor is as follows:
    'Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.'
    But, unfortunately, the error message has no further information.
    If we look at the job log in sm37, the job finished with the following log -                                                                               
    27.10.2009 12:14:19 Job started                                                                                00           516          S 
    27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S 
    27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S 
    27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S 
    27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S 
    27.10.2009 12:14:24 Job finished                                                                                00           517          S 
    In a BW 3.10 system, there is no  message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
    Thanks in advance,
    Rajib

    There will be three things to get the errors like this
    1.RFC CONNECTION FAILED
    2.CHECK THE SOURCE SYSTEM
    3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
    4.CHECK I DOC PROCESSING
    5.FINALLY MEMORY ISSUES.
    6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
    7.LAST IS MEMORY ISSUE.
    and also Check the RFC connection in SM59 If  it is ok then
    check the SAP note : 692195 for authorization
    Santosh

  • Loading from cube to same cube failing

    Hi All,
    we are facing a situation wherein we have to load some data from  a custom cube to the same cube with some selections.
    But we are facing problem while loading it is showing error - no active update rules exists but I have already activated the update rules. the same thing in production system is working fine but in dev system it is throwing error .
    Also in sm58 the trfc's are not getting processed.
    in sm37 , the datapackets are having ARFCSTATE = SYSFAIL .
    I have done the following checks:-
    1)the extractor is working fine with the selections .
    2) Loaded into PSA an then tried to load one by one data packet but failed.
    3) again activated the update rules and tried to load , again failed and the same thing as mentioned above is happening.
    4) in sm58 , executed f6 , the data packets were processed butb then when i run the load again it failed and the data packets were again in 'transaction executing " state .
    Kindlu let me know if there is a way out .
    Regards,
    Dola

    Hi Gareth,
    Many thanks for the response.
    Firstly , yes the same update rules etc are working fine in production expect for 1 thing , in production after every 10 days , we compress the cube . but in dev we are loading it freshly , so no compression or E table is there.
    Secondly, the status of the update rules are "active , executable". the colour is green .
    thirdly , we are using BW 3.5 , so we are loading thru infopackage .
    forthly , It is actually a full load , so when i schedule the load , it actually hangs ( goes on and on and on ) . in sm58 , i can see trfc related to the load in "executable " state for more than 12 hrs ,. after that it goes to "time limit excceded" state . So now when i click on individual trfc , and press f6 , it disappears without any shourt dump.
    And in the details tab in RSMO (data load) , under " Processing data packets "  -  under "update rules" -  
    " start of processing update rules for data target " till this message it i sgreen but after this for update rules we are getting "missing messages :update rules finished for data target".
    I have checked the update rules . it is same as the production ones .
    Any idea as why this is behaving like this .
    Regards,
    Dola

  • GRC-IDM initial load job not enriching one system's privs

    Hi GRC Experts,
    We have integrated IDM 7.1 and GRC 5.3 and tested provisioning to one target system in DEV; this worked perfectly; when testing a similar configuration in Quality, we were setting up the system, and had to run the IDM-GRC Initial Load job in order to enrich the imported privileges for use with GRC AC 5.3; in the Quality system, instead of just connecting to 1 target system, we have connected to 5 ABAP systemes, ECC, PI, POSDM, BW & SRM; for some strange reason when performing the GRC-IDM Initial load job 4 of the target system's privileges get enriched, while the ECC system's privileges aren't getting enriched; I would say through random sampling all ECC profiles are getting enriched but none of the ECC privileges are getting enriched; why could this be happening? we've tried running the ECC Initial Load job  and then the GRC-IDM initial load job about 8-10 times but with no luck; the set of privileges we're investigating are still not enriched; we also ran the GRC CUP role load job, also selecting the option to over-write all existing roles in the system; via this method the CUP roles have been refreshed twice so far, but running the GRC-IDM initial load job even after refreshing the ECC system's privileges in CUP has had no effect whatsoever, all ECC privileges are still left to be enriched, but strangely enough the ECC Profiles have been enriched.
    Any clues as to why this could be happening? We've checked and re-checked and there is no filtering or delta being applied to any of the passes, so it really makes no sense. Is there something we should be doing apart from what we've already done? Would greatly appreciate your help with this!
    Thanks a lot in advance!
    Best regards,
    Sandeep

    What you could do is simply add the attributes by a background job to the privileges. This works fine in most cases. You need to be sure that GRC knows the role and then it is fine. The load only adds those 2 privileges and does nothing of any deeper complexity.
    MX_AC_ROLEID = <rolename>
    MX_APPLICATION_ID = <system name>

  • Wallpaper not loaded from external drive on system startup.

    I have a lot of wallpapers and keep them on an external drive. However, after a restart they are not used, the default system wallpaper is loaded instead. (The external drive's partition appears long after the wallpaper should have been loaded.)
    The same happens when I copy the pictures to a network drive, that is mapped automatically after logging in.

    alex468 wrote:
    The photos are just Jpeg files in a folder, not embedded into iPhoto ...
    I did a test on my iMac with jpegs stored in a folder on my external drive.  My drive is Firewire 800 but don’t think that should make a difference.  Restarted the computer.  A few moments after I had logged into the system, the external wallpaper photos displayed as expected.  Not sure what to suggest.  May not work, but you might go into System preferences and change your selection of wallpaper photos, close System Preferences, and then change back to what you want to see if that resets something.

  • I cannot get iWeb to load on either computer, one running 10.5 and the other 10.6

    I need to make an independent web page for my DAR chapter and upload it through them. I cannot get iWeb to load. It will open and then freezes. I've tried it n both the iMac and the iBook with the same results. What am I doing wrong?

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • HT3702 I purchased two songs from ITunes. One amount has cleared and the other STILL hasn't posted to my account? Why is it taking so long. I have to change my cc number, but if this one still hasn't posted, then my cc won't go through

    I purchased two songs at the same time off of ITunes and only one has cleared my credit card...Why? What if I need to change my cc and my purchase still hasn't cleared?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • ITunes states that my credit card security codes are invalid, but they are correct! I know for a fact that the information I've put in is correct, and I have tried three different credit cards; two visa, and one Amex. Same problem for others in 2008-now.

    How can I fix this problem? I've tried signing out and back in.
    I owe them $1.29 too, from a song, so I cannot select "none" as a payment.
    I'm not buying an iTunes giftcard, either.... HELP!
    I can't even download any free apps, or update my apps.
    Any ideas?

    Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
    If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
    Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
    I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

  • Anything containing or involving Adobe causes my pc to "freeze".. this was not a problem until the last "forced" update from firefox... any help out there from you firefox people... same problem with other webbrowsers as well...

    pc goes "to sleep" trying to "fix problem", to end it, i have to force close

    This article may help: A flashing question mark appears when you start your Mac.

Maybe you are looking for