Load from cube to planning area

Hi,
We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
Scenario is like this.
For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero  (but it was blank) and on D1 Zero and on D2 as 2 in cube.
I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
Can any one put some light and help me out from this issue.
With regards,
Sreerama

Hi Seerama,
I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
When you load the data, you should indeed not flag "ignore zero value"
If the issue you have is in your cube (between the file and the cube) then it is another matter...
Kind Regards,
Julien

Similar Messages

  • How is data loaded from Infocube to Planning area - need technical info

    I would like to find out how data is loaded from cube to planning area ,
    I know that CUBE has tables, but how does that get loaded to planning area , where is the mapping from which I can compare
    data in CUBE and the same data that reaches planning area.
    Say for example I have below values in the infocube
    Prod1 --> Loc1 -
    > available provisioning qty
    AAA        AB90             100
    Then where do i check in the planning area tables ( are there any tables mapped) after running the TSINPUT program, i know it can be checked in the planning book , but i want to check in planning area tables if they exi

    Hi ,
    The data is loaded from infocube to planning area using update rules. The issue you have mentioned seems to be two requests are having data for the same CVCs in the cube.
    Example: For the same CVC, two requests avilable in the infocube. When you copy the data using TSCUBE transaction, whatever data avilable in the cube for the CVC gets copied into Planning Area.
    CVC1 - cube - Old Request - 100
    CVC1 - cube - Actual Request - 200
    CVC1 - Planning Area = 300 ( The value is supposed to be 200, but since the old request also contains data in the cube for the cvc, it gets copied as 300)
    Issue : There might two request contains data for the same code
    Solution : 1. Check the data in the cube using transaction LISTCUBE  2.  Delete old request and check the data agian. 3. If it matches with your requirement, run the TSCUBE again.
    Please let me know if you need additional information.
    Thanks,
    Jeysraj

  • Loading data from Cube to Planning area

    Hi,
             If I am loading data from a cube to a planning area using transaction TSCUBE,
    does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
    For example,
    I have my CVC as Plant, Material, Customer
    If there are 4 CVCs in the POS that were previously generated as
    Plant--Material--Customer
    01--M1--
    C1
    01--M2--
    C3
    01--M2--
    C2
    01--M4--
    C5
    If the cube has data like this:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    (doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    Only for the 3 combinations that exist in the cube and not load anything for the last one
    OR
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    01--M4C5--
    0
    Load all 4 combinations and send 0 as the cube doesnot have this combination?
    Hope I am clear on this question.
    Thanks.

    Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
    We initially get data from R/3 to BW to APO like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    BW can identify changes in transaction data  but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
    If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M1C2--
    10
    If I am looking at Plant and Material Level, my data is doubled.
    So we are planning to do a full load that works like this:
    1. Initial data like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    The CVC is created and the planning area has Qty.10
    Then we delete the contents of cube and do a full load into the cube with changed customer
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    This time a new CVC is created. Then we have another 10 loaded into Planning area.
    If the system loads all CVCs, then the it would send
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    0
    01--M1C1--
    10
    If the system loads only combinations in cube,
    then it loads
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    But the system already has another 10 for Customer C1 duplicating the values.
    We are trouble in the second case.
    We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
    Hope I am clear.

  • RE : BI APO Question Reg Data feeding from cube to Planning area.

    Hi BW Experts,
    iam working in an Implementation project for SCM in BW prcisely working with APO Bw..
    For that I have taken historical data as a flat file and loaded it in to the external BW Infocube and its fine...
    Second step I have created generate export datasource on topr of BW infocube and replicated in to Bw and used this export datasource as datasource for APO BW Infocube which is inbulit BW System from External Bw..
    also I have created tranformations and data is loaded in the BW cube in APO system.Also Included Version charecterstics..
    When I try to fed the APO Cube data to planning area Iam gettinga the following  warning itsnot an error:
    1.Key figure copy: InfoCube - planning area (DP) 01.01.2010 to 31.12.2010-- Successful
    *2.No data exists for the selection made (see long text*
      Diagnosis:Data could not be loaded from the Cube for the selection you made. Check whether the Cube actually contains data that is relevant for your selection.
    For the second point I have time charecterstics filled in the infocube which Iam feding to a Planning area like 0CALMONTH,0CALWEEK,FiscVarnt,0CALMONTH
    3.Characteristic assignment: No data copied --- Message
    Can you please help me with your thoughts so that i wll try to corner the issue I will be highly obliged

    Hi,
    As I understood, you have loaded data from external BW cube to APO BW cube and now loading planning area from APO BW cube.
    I hope your settings in /SAPAPO/TSCUBE transaction code would be correct and you have selected the correct planning version with correct cube.
    Check if Data in APO BW cube is available for reporting or not and data is avilable for given selction (if any but I guess you are not giving any).
    Thanks,
    S

  • APO DP - loading from InfoCube to planning area

    I am using APO DP V5.
    I have the following situation:
    1. I am extracting sales history data at the end of each day from a connected ECC system into an InfoCube, using delta logic, so in the Cube I just have the new sales history transactions (despatches) for the day
    2. I am then loading data from the Cube to my DP planning area via transaction /SAPAPO/TSCUBE
    I assume I must have the 'add data' flag set for each key figure in this transaction, to ensure I see the consolidated sales history in the planning area.
    Is this the 'best practice' approach for regular loading of sales history? I assume it's better to have a 'delta' approach for the Cube, for improved performance.
    Thanks, Bob Austin

    Hi,
            Good questions!
    1. What does the 'period' really refer to? Is it referring to the date of a particular key figure? Or the 'date of data being added to Cube'?
    A: Both are same
    The date is generally the date in your cube like the calendar day, month etc. This date is again based on a time stamp in the format DDMMYYYYHHMMSS. The calendar day is part of this field as DDMMYYYY. Also the system recognizes the changes by the same time stamp. So, if a customer changes the qty 05/15 at 3.30 pm, then the time stamp is 15052007153000. The calendar day in your cube or your key figure date is 15052007 and the delta is recognized by the changes in time stamp, between last load at the current system time. So , you are talking about the same time field.
    Check in your system if this is the same case you got. let me know if not.
    2. Suppose original dispatch qty = 100 (two weeks ago), and 'today' the customer returns a qty of 60; how does system handle this - I would want this posted to the original date of two weeks ago.
    A: The data from your ECC system is generally brought to an ODS first. The reason is we overwrite the data there if there is any data that has the same key. If your key for the ODS is Customer and division. Then you overwrite the customer qty for that division whenever the value changes. If you need it by time, lets say per month, include it in the key. The system over writes the value for that month only. For next month, it's a new record.
    In your case, if the qty. is 100 2 weeks back and now it's 60, if the time stamp is not in key, the system overwrites it to 60 and you have only 60 when you load it to your ODS and thereby to your PA as it overwrites. Delete the delta in your ODS and it shows the same 100 again. Then load it to PA. This is not a good option. The alternative is to include time stamp like calweek in your ODS key and load it over to cube. That way you have two records.
    I hope I answered all your questions.  Please feel free to ask more. I would love to answer that way I can also brush things up that were unused.
    Thanks.

  • Loading data from cube to Planning Area - Error

    I have two cubes. one has history data and other ratios.
    the forecast is dis aggregated based on that ratios.
    first the ratio data is getting loaded and gets populated.
    when i try to load the history data, a error says, CVC not maintained.
    there are totally 6 Char used in this Config.
    MPOS is created using the ratio cube and has the same char as in history cube, additionally one more sub family.
    Can some one help me in this.??
    Thanks !!!

    hi
    char in hist cube           
    mkt fam                           
    mkt seg                           
    regn                                
    gobl                                
    cntry 
    Char in the MPOS(from Ratio cube)
    mkt fam                           
    mkt seg                           
    regn                                
    gobl                                
    cntry 
    sub family                           
    the main obj of not including it in hist cube, i forecast @ mktfam level n dis aggre to sub family.
    if i include the sub family also in hist cube, then i can forecast @ sub family itself..
    the whole dis agg. logic does not serve the purpose.
    On the Adjustment of Time series, will try it n revert n back.
    like can you please tell me how it affects the process???? or the logic behind doing this????
    Thanks!!!
    Edited by: Aswath ram on Sep 10, 2008 6:33 PM

  • Release of History from Info Cube to Planning Area

    Hi Experts,
    I am using program /SAPAPO/RTSINPUT_CUBE to load sales history data from Info Cube to Planning area. Most of the data gets loaded but for few CVCs we get following message: -
    549 combinationens of InfoCube are not contained in the BasisPlobStru
    While checking up these CVCs in transaction /SAPAPO/MC62 and Planning Book I can see that these CVC exist and data is also visible.
    Could anyone please help me out with the reason and what should be done to encounter this.
    Thanks in Advance.
    Thanks and Regards,
    Chandan

    hi Chandan,
    First of sincere apologies for not having read the query completely.
    regarding your query on 549 combinationens of InfoCube are not contained in the BasisPlobStru, as you have stated that the CVCs exist in the MPOS.
    But can you please check if the CVCs maintained in the MPOS are the exact CVCs that are mentioned in the messgae. For example, the message is for location product sales org Country. Can you check if the CVC exists for this combination for which the forecast is being loaded from the source? For example it is possible that data is being loaded for Loc1 Prod1 SalesOrg1 Country1, but the CVC exists for Loc1 Prod1 SalesOrg2 Country1, then such message appears.
    So can you check if the exact CVCs are exisitng in the MPOS as indicated in the messages?
    Rgds, Sandeep
    Sorry again for misreading on your query.

  • I need format for data in excel file load into info cube to planning area.

    Hi gurus,
    I need format for data in excel file load into info cube to planning area.
    can you send me what should i maintain header
    i have knowledge on like
    plant,location,customer,product,history qty,calander
    100,delhi,suresh,nokia,250,2011211
    if it is  right or wrong can u explain  and send me about excel file format.
    babu

    Hi Babu,
    The file format should be same as you want to upload. The sequence of File format should be same communication structure.
    Like,
    Initial columns with Characteristics (ex: plant,location,customer,product)
    date column (check for data format) (ex: calander)
    Last columsn with Key figures (history qty)
    Hope this helps.
    Regards,
    Nawanit

  • Error while copying data from infoprovider to planning area

    Hi,
    Error for COM routine using application program (return code 40,075)
    Message no. /SAPAPO/OM102
    Diagnosis
    An application program has called a COM routine. During the process, an error occurred.
    I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
    How to resolve this?

    Hi,
    Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
    Below are the programs for the same.
    /SAPAPO/TS_lcm_cons_check
    /SAPAPO/TS_PSTRU_TOOL
    /SAPAPO/TS_PSTRU_CONS_CHECK
    Regards
    Kishore

  • Copy Data from Non CBF Planning Area to CBF Planning Area in APO DP

    Hi Experts,
    I am working in APO implementation in an automative client, here we have material type Vehi and configurable material.
    I have done my forecasting in Non CBF planning area . Now I want to copy Key figure of final conenses forecast which is in non - CBF planning area to a CBF planning area .
    Can anybody has worked on similar scenario or worked in copying data from a non - CBF planning area to CBF planning area.
    Looking for your valuable inputs
    Thanks and regards
    Kapil

    Hi Kapil!
    We have the same need mentioned by you "Copy Data from Non CBF Planning Area to CBF Planning Areau201C.
    We obtained the source data, but can not do to write the same in CBF area.
    You managed to make the recording of such data in CBF area? How did they do it?
    Thanks and regards.
    Clelidon

  • Can data be loaded from Cube to DSO

    Can data be loaded from Cube to DSO

    Hello,
    Yes,it can be loaded...all you need to do is the follow the same procedure of source and target as you do with the normal flow,...there is no different with cube as data source...you can even schedule delta from the cube to the DSO.
    Thanks
    Ajeet

  • DTP - Load from cube to cube - Setting "Use aggregates"

    Hi all,
    what exactly does the setting "Use aggregates" on the extraction tab in a DTP which loads data from Cube to Cube mean? The F1-Help didn't really bring me any further...
    Thanks to any answers in advance!
    Kind regards,
    Philipp

    Hi,
    U can update data from from one data target to other data target through data marting.
    right click ur ODS or Cube from where u r updating data to other target and select the Generate export data source. then it will create a data source with the name 8forllowed by ur data taget name. there after assign ur data source to ur infosource. and then create Update b/n the targets and then select the update data to other data target from where u r updating.
    select the type of update. and then load it from ur IP.
    regards-
    MM

  • Loading from cube to same cube failing

    Hi All,
    we are facing a situation wherein we have to load some data from  a custom cube to the same cube with some selections.
    But we are facing problem while loading it is showing error - no active update rules exists but I have already activated the update rules. the same thing in production system is working fine but in dev system it is throwing error .
    Also in sm58 the trfc's are not getting processed.
    in sm37 , the datapackets are having ARFCSTATE = SYSFAIL .
    I have done the following checks:-
    1)the extractor is working fine with the selections .
    2) Loaded into PSA an then tried to load one by one data packet but failed.
    3) again activated the update rules and tried to load , again failed and the same thing as mentioned above is happening.
    4) in sm58 , executed f6 , the data packets were processed butb then when i run the load again it failed and the data packets were again in 'transaction executing " state .
    Kindlu let me know if there is a way out .
    Regards,
    Dola

    Hi Gareth,
    Many thanks for the response.
    Firstly , yes the same update rules etc are working fine in production expect for 1 thing , in production after every 10 days , we compress the cube . but in dev we are loading it freshly , so no compression or E table is there.
    Secondly, the status of the update rules are "active , executable". the colour is green .
    thirdly , we are using BW 3.5 , so we are loading thru infopackage .
    forthly , It is actually a full load , so when i schedule the load , it actually hangs ( goes on and on and on ) . in sm58 , i can see trfc related to the load in "executable " state for more than 12 hrs ,. after that it goes to "time limit excceded" state . So now when i click on individual trfc , and press f6 , it disappears without any shourt dump.
    And in the details tab in RSMO (data load) , under " Processing data packets "  -  under "update rules" -  
    " start of processing update rules for data target " till this message it i sgreen but after this for update rules we are getting "missing messages :update rules finished for data target".
    I have checked the update rules . it is same as the production ones .
    Any idea as why this is behaving like this .
    Regards,
    Dola

  • Load from cube on one system to same cube on other system

    If i have the same cube on two different BW systems, how can i load data from one cube to the other ?
    thanks

    First thing is you have to create a export data source. Right click on the cube and choose "Generate Export Datasource" in additional functions of context menu. It will generate a datasource prefixed by 8. like: 8ZTESTCUBE
    Then come to another source system where you want to load the data. In rsa1 --> Source system --> choose your source system ---> Replicate --> You will get your data source you generated here.
    Now create a transformation, do mapping, activate and create a DTP. Load the data.
    Pravender

  • Error /SAPAPO/TSM 041 when loading from InfoCube to SNP planning area

    I am using APO V5.1.
    I have a 'backup' InfoCube with characteristics 9ARNAME and 9AVERSION which I'm loading to an SNP planning area via trans /SAPAPO/TSCUBE. The InfoCube is itself populated from the 9ARE aggregate of the SNP planning area.
    But I get error /SAPAPO/TSM 041when I run the load, suggesting absence of a required characteristic or navigation attribute in the Cube. Do I need 9ALOCNO for instance?
    Can anyone advise me here?...

    Hi,
    I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
    Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
    If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
    Hope this helps.
    Thanks - Pawan

Maybe you are looking for