Load hierarchies from ODS

Hi, all.
Please advise, how I can load hierarchies from ODS, if
ODS stores data about structure of hierarchies. If any solutions exists excluding, extract data to flat file and load it again to hierarchies.
Max.

Hi,
Hierarchies data one type of data master data.
BW data base was desifned master data stored out side the cube. When ever other data target (cube) can use those master data .I.E you can load data on info object level. Becose this is master data.
You can load data from flat files .
The structure is like this.
when ever u r creating hierarchies three table is going to create /BIC/HZGLACOUNT,/BIC/KZGLACOUNT,/BIC/IZGLACOUNT
While loadong falt file you need to take this table /BIC/HZGLACOUNT structure. According that structure  you need to create excel sheet and loading is like flat file.
TX,
V.V.REDDY

Similar Messages

  • "Error While loading data from ODS to Target "

    Hi All,
    I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 09.08.2006 10:17:24.
    The time stamp in the BW system is 15.03.2006 16:44:34.
    But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
    Please help in resolving this,
    Thanks,
    Sairam.

    You are welcome Sairam
    The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
    Hope this helps...

  • Error While Loading data from ODS to Infocube

    I am trying to load data from ODS to Infocube  thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
    My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
    Please advise.
    Thanks,
    RR

    In Details tab of monitor, in extraction step,
    Extraction(messages): Errors occured
    Green Light for Data Request Received
    Green Light for Data Selection Scheduled
    Yellow for 25000 Records sent(0 records received)
    Yellow for 25000 Records sent(0 records received)
    Yellow for 15000 Records sent(0 records received)
    Green Light for Data Selection Ended
    Please let me know, If you need more information.
    Thanks,
    R R

  • Error while loading data from ODS to IC.

    Hi Experts,
                 I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
    Delete init. request                          
    REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running 
    init. again with same selection               
    Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
    Can anyone of you please help me.
    Thanks,
    Nandini.

    Hi,
    By reading the error:
    No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
    I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
    Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
    I hope this helps!
    Pietro

  • Error while loading data from ODS to CUBE.

    Hi friends,
    When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN  DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
    Its is showing like this .
    Transfer Rules : Missing Massage.
    Update PSA : missing massage.
    Processing end : missing message.
    I have checked the coding in update rules, everything is ok.
    Plz any inputs.
    hari
    Message was edited by:
            hari reddy

    Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
    Regards,
    Vitaliy

  • How  to Load  Hierarchies  from flatfile in BI7

    Hello Gurus, 
    How  to load  Hierarchies from flat  file  in  BI7
    As  when  creating datasource  in  BI7,
    IT  GIVES  FOLLOWING  OPTIONS 
    TRANSCTION  DATA 
    MASTER  DATA  TEXTS
    MASTER  DATA  ATTRIBUTES...
    ALL  THESE   WE BRING  TO  PSA LEVEL BY  INFOPACKAGE  AND  SEND  DATATARGET  BY  DTP...
    But  how  about  Hierarchies... 
    Looking for  reply 
    Regards 
    Guru

    Look at the below blog for step by step procedure :
    Hierarchy Upload from Flat files
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

  • Error when trying to load data from ODS to CUBE

    hi,
      Iam getting a short dump  when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

    Hi,
    Check this thread.........Ajeet Singh  has given a good solution here.........
    Re: Error With Data Load-Getting Canceled Right Away
    Also check SAP note: 382480..................for ur reference............
    Symptom
    A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
    Data type "TXW_INDEX" was found in a newer version than required.
    The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
    Additional key words
    RTXWCF01, LTXW2U01, TXW_INDEX
    Cause and prerequisites
    This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
    Solution
    If possible, avoid running DART extractions in parallel.
    If you do plan to run such jobs in parallel, please consider the following points:
    In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
    Run parallel DART jobs on different application servers.
    As an alternative, please apply note 400195.
    It may help u.........
    Regards,
    Debjani.......

  • Error During Load Infocube from ODS

    Hi guys i hae an infocube and an ODS i load data to the ODS directly from SAP and its OK but i have an error when i try to load data from ODS to infocube, i`ve created an update rule from ODS to infocube theres an error in the load request "Load Request is invalid" i try to load to infocube from ODS in many ways Full, Init Delta but i have the same error in all of them.....i need to do something before or i need to change in any way the data targets.....
    I hope somebody could help me with this.......

    HI,
    Activate the data in ur ODS. Then right click on ur ODS n choose "create export datasource". Now right click ur ODS and go to "Manage" and make sure that the QM status is green and the Datamart status is checked with a green mark. Now carry on the load from ODS to infocube.
    Hope this helps...Let me know
    Regards,
    R.Ravi

  • Date load error From ODS to Cube?

    Guru's,
    Here is a status of data load and suggest me.
    Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
    point will be definitely awarded for the proper answers.
    Thanks in advance.
    vasu.

    Hi Vasuvasu
    Once the edit is done and reloade the sata it wont show u the records in Red..
    Hope itz Helps..!
    Regards
    KISHORE M REDDY
    **Winners Don't Do Different things,They Do things Differently...!**
    > I dont whink this is with Disk space Y because after
    > every full load we are deleting data.

  • Help needed with loading data from ODS to cube

    Hi
    I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
    "Error in the unit conversion. Error 110 occurred"
    Help.
    Thanks.

    Hi Chintai,
    You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
    Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
    Hope this helps...
    And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

  • Error While Loading Data from ODS to ODS

    Hi Experts,
    When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
                          I'm unable to see the  long text for further information.
    Regards,
    Vijay

    Hi vijay bhaskar,
    first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
    Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
    I hope you understood and can handle your issue.
    Assign points if it is helpful.
    Reagds,
    S P.

  • After upgrade to BI NW4.0S issue in loading cube from ODS

    Hi,
      I have an SAP delivered ODS(0CRM_OPPT_H) which I was loading for some time. The cube 0CRM_C04 was loaded from the ODS a couple of times. I have now deleted all the data from the cube and want to load the data from the cube to ODS, In between our BW was upgrade frpm 3.5 to BI NW0S..
      I have done all prerequisite , replicated the 80 datsource , deleted and re activated the update rule and transfer rule again.. and then tried to load the Cube from ODS.. however everytime I am getting the following error
    DataSource 80CRM_OPPI does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 12/23/2005 10:09:36.
    The time stamp in the BW system is 11/09/2005 13:02:29.
    Is it due to the upgrade?? I have done everything so that this dosen't happen, still could not resolve..
    Thanks

    Are you sure you've replicated the DataSource 80CRM_OPPI? Try replicating it individually again. If that doesn't help, have you tried reactivating the ODS Object itself?
    Regards, Klaus

  • Problem while loading data from ODS to infoobject

    Hi guys,
    I am facing problem while loading data from <b>ODS to infoobject</b>.
    If I load data via PSA it works fine but
    if I load data without PSA its giving error as Duplicate records.
    Do u have any idea why it is so.
    Thanks in advance
    savio

    Hi,
    when you load the data via the PSA, what did you select? Serial or Paralel?
    If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
    Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
    hope this helps...
    Olivier.

  • Load data from ODS 3.5 to Info Cube 7.0  ?

    Hi BI Experts
    I am new to BI 7.0 , my requirement is  i want to load the data from ODS  3.5 to Info Cube 7.0
    Is this Possible to load from old version to new version?
    If Possible please let me the steps
    Thanks in advance

    Hi there,
    ODS 3.5 is just like DSO 7.0 and InfoCube 7.0 is just like InfoCube 3.5
    So you can still use the old fashion 3.5 mode with InfoSource, update rules, transfer rules and InfoPackage to the InfoCube, or you can now use a transformation with DTP
    Diogo.

  • Short Dump while loading Delta from ODS to ODS

    Hi Experts,
    I have run into a short dump error while loading delta from one ODS to another via a process chain.
    Following is the error message:
    Error analysis                                                                               
    Short text of error message:                                                                 
        Request 0000259294 is not completely activated. Please activate it again                     
    Technical information about the message:                                                     
         Diagnosis                                                                               
    Activation of request 0000259294 has terminated, or is not yet                          
             complete.                                                                               
    System response                                                                               
    Procedure                                                                               
    If the process has terminated, all of the requests that the system                      
             was unabe to activate in the most recent activation process have to                     
             be reactivated before the new requests can be activated.                                
             If you are not able to carry out this activation step, delete the                       
             relevant requests from the administration of the ODS object (on the                     
             Requests tabstrip).                                                                     
         Procedure for System Administration                                                         
        Message classe...... "RSM1"                                                                  
        Number.............. 180                                                                     
        Variable 1.......... 0000259294                                                              
        Variable 2.......... " "                                                                     
        Variable 3.......... " "                                                                     
        Variable 4.......... " "                                                                     
        Variable 3.......... " "                                                                     
        Variable 4.......... " "                                                                     
    Can someone help me resolve this?
    Thank you

    Check the status of request SID 259294  in ODS, whether the Activation got completed or not. If not wait till the activation completes.
    If there is any problem in the activation process, correct that complete the activation process and load the ne request that you want to load..
    Regards
    VJ

Maybe you are looking for