Load Master Data InfoObject using Query as Datasource

I there a way to use a BW Query as a Datasource to load a Master Data InfoObject. I have a query that calculates DSO for a customer and would like to update a custom DSO attribute in 0Customer

As Bhanu mentions, Analysis Process Designer would be an option. I did not use it before 3.5, but I know it did not have all the capabilities it has with 3.5.
I don't think there is any need for transactional ODSs in the process however. You can specify your query as the DataSource, specify any filtering / transformations needed, and then specify the InfoObject that is the data target. I haven't used a query to create Master Data with it but I do use it to take Master Data as input, manipulate it, and then update that Master Data.
The APD is covered in BW380 along with Data Mining - which is a good class if anyone is interested.
Is it easy enough for someone to pickup without training on it? I don't know - I think it would be for someone that has experience with the BW Admin Wkbench and has time to experiment. I think the related Data Mining features would require training.
APD has a lot of powerful capabilities that could be used to solve a variety of challenges not readily solved with the Admin Wkbench tools. I'm not sure why SAP hasn't done more to promote it.

Similar Messages

Dump when loading Master data(Attributes). using DTP

Hello.... I am loading activity network.
and getting a dump.
"MESSAGE_TYPE_X" " "
"CL_RSDMD_UPDATE_MASTER_DATA===CP" or "CL_RSDMD_UPDATE_MASTER_DATA===CM00R"
"_CHECK_DATA_PACKET"
check for oss couldn't find any solution I am in (BI 7.0 - 2004s) support pack SAPKW70015. If anyone of you has come accross this please let me know how you solved the issue.
thank you.

Hi Gopal,
Here is the info on error message.
" There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
Hope this helps in understand the DTP error.
Thanks,
SB.

Loading Master data using DTP's

Hi,
I have got a problem with loading master data,we use DTP's for loading it,but the requests were failing due to prior incorrect requests for that master data infoobject,inspite of the fact that Master data always overwrites and also the DTP's were full update enabled.
To load successfully we need to go and delete the previous requests all the time.
I think there must be some way of solving this problem,help from you all will be really appreciated.
Regards,
G.Monica Roja Flora.

yeah you would need to delete the incorrect requests before you can load again. Though the master data is overwrite, with the incorrect request the status can never be A.

Loading Master Data Version 7.0

I am having a problem loading the master data for an infoprovider. I have assigned several characteristics and have created the various transformations, infosources and data sources to populate the infoobject with master data. However when executing the DTP I get a error stating that the InfoCube is marked for Real Time and it cannot be loaded. Don´t really know why this is...do I need a Plug-In for the Real-Time upload?
Thanks for the help.

Thank you. Yes, I am sure I am loading an InfoObject, it is assigned to an InfoArea and therefore can be used as an InfoProvider, however it is a Characteristic to be used in DP. I have no problem loading InfoCubes. The problem I have is loading master data from R/3 to the respective attriubutes that I have assigned to the InfoObject. Here is the scenario.
InfoObject: S_PEDIDOR
Attributes:
S_CLIENH1
S_CLIENH2
S_CLIENH3
S_CLIENH4
S_VKBUR
S_BZIRK
S_PARVW
S_VKGRP
S_GRDMAND
The attributes come from the field names in R/3. I have created the data source in R/3 and transfered the metadata to APO. I have created an InfoSource and the transf. from the DataSource to the InfoSource. I have also loaded an InfoPackage with success to a PSA. I have also created the transf. from the InfoObject Attributes to the InfoSource. I have assigned the infoobjects in the respective fields in the transformation. I have no masterdata for the InfoObject S_PEDIDOR. I cannot create a DTP for the InfoObject cause it tells me that it cannot load the data in a Real-Time destination.
The question is: How do I load master data from a R/3 DataSource to the master data of an InfoObject
Edited by: Steven Hoffman on Mar 6, 2008 11:54 AM

Procedure to load master data in bw and bi

Hi All,
How load master data and use master data as a reference while loading transaction data

Hello,
Loading Master Data without using the PSA in SAP BI 7.0 :
https://community.altiusconsulting.com/blogs/glenchambers/archive/2008/03/10/loading-master-data-without-using-the-psa-in-sap-bi-7-0.aspx
Data Upload from Flat File to Business Intelligence 7.0 System:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60debae1-84dd-2b10-e7bf-bdedf1eabdf9
To load data from r3 data source , activate it at R3 side.
-- then replicate it in BI.
-- then you will get that data source in BI. Right click it & from pop up menu select appropriate options to create info package, transformation & DTP one by one. (activate each after creation)
-- execute info package. It will fetch data unto PSA.
-- execute DTP. It will load data to target according to mapping done in transformation.
Hope it helps.

To load master data into infoobject 0mat_unit

Hi Experts,
Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
I will assign full points for suitable solution.
Thanks in advance!
Sapna

Hi Sapna,
See
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
Udo

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Simple basic question on attribute data load for Master Data InfoObject....

Hi
I am a bit confused & wanted to have some clarification on the following:
1) For loading Attributes data to Master Data InfoObject, we load it through Data Source of Type Master Data Attribute.
But what i did, i created Data Source of type Transaction data and using the same Excel file, i was able to create transformation with Matser data Attribute and was able to load the data.
This shows i can use Data source of type either master data attribute OR Transaction Data doen't matter while loading into master data attribute. IS THIS TRUE?
2) I have 2 master data infoobjects (Test1 & Test2). I made Test2 as an attribute in Test1.
My question is while loading Master data for Test1, will it also load the data into Test2 if it doen't find respective data in Test2?
(i did all the transformation as per need.)
Waiting for your reply....
Thanks...

HI Harpal,
1. Did you make a transformation between attribute data source from source system other than flat file and DSO?...
I think PC File is flexible in this aspect..
2.While loading Test1 the infoobject Test2 will get loaded only if it is a navigational ttribute..(You can see this by refering the SID Table)
Please also note that it does not load Test2 attributes.
regards,
Rakesh.

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

Loading master data compounded infoobject

Hello experts
I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
Thanks for your help and happy new year
Thibault

Dear Thibault
Yes, PA_PAPRCT is not the basic characteristic.
Instead of this, use the superior object for this object.
Than you can load the master data for all these objects.
Hope now you will get the idea
Regards
Saravanan.ar

Loading Master Data to an InfoObject

All,
When loading a info provider like an ODS or Cube, there is a 'manage' option where you can see the requests that have loaded and that have failed. Where is the equivalent feature for loads to an InfoObject? Is there one?
Thanks in advance...

hi nat,
go to administration work bench (rsa1) go to info objects in context menu u can find maintain master data
click on that u can see the master data of that infoobject.
As master data is important we can't delete with requests
as in ods or cube.usually developer will wont have authorization. we can edit the masterdata by reloading it
again.
Once u loaded master data using info package, in the monitor tab (rsmo ) u can see the status of the dataload
green indicates successfully loaded or red indicates data not loaded properly
hopes this clears ur doubt
let me know
<b>Assigning pts is the way of saying thansk in sdn</b>
cheers
ravi
regards
ravi

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Load Master Data InfoObject using Query as Datasource

Similar Messages

Maybe you are looking for