Load Master Data Text for 0COSTELMNT

Hello,
I would like to load text for master Data Cost Element (infosource 0COSTELMNT). The loading is Ok but, when I execute the infopackage the next time, I have the status yellow and the message "The data request was a full update. In this case, the corresponding table in the source system does not contain any data. System response
Info IDoc received with status 8.".
It's normal that there are no news datas to upload but the problem is that the process remains not yet completed.
The parameters of the scheduler are :
- selection : none and "Use conversion routine"
- Processing : PSA and then in the InfoObject
- Update : Full update and Fixed Time Interval (start date : today, end date : 31.12.2006)
- Schedule : Start Data Load Immediately
The option Treatment of Warning is set to green.
Thanks in advance to help me.
Daniel.

Hi,
It's yellow.
On the R/3 system, when I launch RSA3 and Extraction for the DataSource 0COSTELMNT_TEXT, the result is 0 enreg too (no selection in the screen).
Thanks.

Similar Messages

How to load master data texts for (0calmonth)

Hi pro's
i hve a issue.
How to load master data texts for 0calmonth.
any help is appreciated
regards
cheers

within the admin workbench goto source systems, right click on your source system and click on transfer global settings. There you can choose fiscal year variants and some other options to be loaded to BW.
Regards

Loading Master data :Text for 0GL_ACCOUNTT

Hi,
I am trying to load master data text from BW 3.5 system to BI 7.0 through Export data source. The data transfer is terminated with the following error meassage.
'In the source system, there is no transfer structure available for
InfoSource 80GL_ACCOUNTT .'
I have selected the check box in the Infoobject Characteristic with the export data source and then replicated the data source in BI 7.0.
Please provide me with suitable solution.

Hello Richa,
Last week I have a problem similar, try to generate 80GL_ACCOUNTT in BI 7.0 first, right clikc in infosource (0GL_ACCOUNTT) -> Generate Export Datasource.
Hope its help..

Master Data Text for Infoobject Plant Section

Hi Experts,
I've changed the standard Infoobject of Plant Section (0PLANTSECTN), so the master data (text & attribute) is active now.
My question is: Does SAP BW provide the standard business content for master data of 0PLANTSECTN?
Coz i've checked it on RSA5, but the datasource is not exist.
Thanks for helping, hope you could give me some enlightenment
Warm Regards,
Tika

Thanks for ur answer Swapnil..
So the only thing i can do is create a custom DS and load the data (text) via Flat File? Or is there any way else to load the master data text?
As I know, loading data from flat file is only can be done manually. The problem is, i have to make sure, that data in BW is always relevance with data in ECC. Hence, i need the standard DS. So i could load it directly from ECC.
Am very appreciate, if any of u could share the best way.
Thanks

Error loading master data text

Hi all,
When I does a data load from PSA for master data text,
error appears whcih shows "0OI_PBLTYP : Data record 3 ('INFO') : Language key is initial".
Please tell me why this error.
Hint:I have 17 records in PSA for 11 location types.
11 in English and 6 in German.
Thanks ,
Chintu.

Hi Chintu,
Since you have made the info-object as "language-dependent" the system is looking for lang-key in the data. You can either enter the lang-key in the pSA directly. But if the source system is R/3 my suggestion would be that you pick up the lang-key for the datasource. This would ensure that you dont have to edit the PSA each time you load.
Bye
Dinesh

Langauage issue -when loading master data text

I have a customer master data attribute and text .
This is master data is customized one. With in function module based on sy-langu it will extract the English,German,French.... customer data
R/3 side -Rsa3 transaction when i logon each logon language it is extracting the correct information with text values based on the logon language.
When I am loading the data for each language it is not loading.It is updating only the english.
I logged on as french ,German loaded data attribute and text also. Still it is not updating in the master data text values with french ,german.
Infopackage selection also I set DE and French.
Master data Infoobject - Text language dependent is marked also.
Advance thanks

Hello smartone,
I'm facing the same problem right now (only getting EN). So maybe we can share some experience.
On help.sap.com I found the following link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm</a>
Almost at the bottom of the page there is the description about the language vector. The settings made in this vector control the extracted languages. As a standard all installed languages in the system are marked here.
In the following link describes how to change the settings.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm</a>
But to be honest, I do not know how to get to the parameters. Otherwise I would have tried to check/change them. Does anyone have an idea?
Regards,
Martin

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error in Process Chain while loading Master data text?

Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no repeat option?Now how to run this process?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balaji

Hi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

How to Load Master data text Description into the Data Target?

Hi,
I have a Master data which is an ID, and the description for that ID is added as text description along with the master data.
The datasource is a flat file load, which has both the fields i.e. ID as well as the description along with many other fields.
I need to load the flat file without changing it, into the ODS.
Please suggest a way to load the description of the ID along with the ID into the ODS, and then further into the CUBE.
This description field should be available, while checking the contents of the ODS as well as the CUBE.

hi Srinivas,
Thanks for the quick response.
I actually have the flat file with the description within it.
I cannot make any changes to the flat file.
So, please suggest me accordingly.

How to Load Master Data Text from Multiple Source Systems

Situation: Loading vendor master (text) from two systems. Some of the vendor keys/number are the same and so is the description. I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor. However, I don't believe you can do the same when loading text.
Question: So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
Thanks!

Hi,
Don't doubt, it'll work!
Sys ID as compound to 0Vendor.
If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
Best regards,
Eugene

Error while loading master data text

Hi all,
I have scheduled my first load into Production for a text datasource which still shows as running but when I looked into the Details tab I found the below error:
Transfer (IDocs and TRFC): Errors occured
- Request IDoc : Application document not posted.
I checked the IDoc in R/3 and found that it is with Status 51 - Application Document not posted. The error it is showing there is "Request REQU_XXXX is not available in target system YYYY".
What could be the reason for this? What shall I do to resolve it?
Best Rgds,
James.

Hi,
right click your source system in BW and perform a check. Most likely the connection is not setup properly.
If this check failed
Check RFC destination:
- from BW, SM59, open your source system destination; test connection and from the menu, test authorizations.
- perform the same from your R3 source system with your BW connection.
If RFC are fine most probably the partner profiles and/or the ports are not configured properly.
Let BW perform this task for you: right click your source system and execute a restore. You will require
- administrative rights on the source system
- open the source system client so that bw can delete and recreate the partner and ports profile (SCC4: automatic recording of changes/ changes to rep and cross client allowed)
- ALE/ALEREMOTE or your communication users passwords...
With this follow the steps proposed by the restore procedure. ; when the system prompts to delete the connection, do so. You replicate metadata at the end as well...
hope this helps,
Olivier.

BPC 7.5 NW Master Data Text Node Load with Hierarchy Intervals - Duplicate

Hi,
Does anyone have ideas on how to get past this error (besides a BADI)?
I am loading master data text nodes from a BW hierarchy (say 0COSTCENTER) that has intervals defined for cost center nodes. The problem is that the text nodes fail since there are duplicate values in the hierarchy table.
Master data (dealt by table level) has errors
Detected duplicate member ID 'F100'
Detected duplicate member ID 'F100'
Detected duplicate member ID '1000'
Detected duplicate member ID '1000'
etc...
Thanks!

Hi Virginie,
You should be able to see an example in many threads; look for an example to Restriction of bw infoobect(not mapped to dim)
You can also make a restriction under the InfoObject name when you run the DM package.
Hope this helps,
Gersh

Master Data Text Load Problem

Hi Guys,
This is the first time we are loading master data Text in the production for a infoobject and its a full load.I had sucessfully loaded the and it dint added any records but i can see so many transfer records.When i went to infoobject for my suprise i'm able to see the data.
Can i know the reasons what happened in the back and what can i do if want to see the added records in the Manage tab.

Hii
Try to activate the master data or execute the Attribute Change Run.
Also give the loading steps u r following
Thanks
Neha

Master Data Text Used as Line Items in ODS

Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!

Hi Simon, 
Thanks for the reply! 
First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. 
Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? 
However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. 
Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)
Thanks again.

Load Master Data Text for 0COSTELMNT

Similar Messages

Maybe you are looking for